Slackware :: Unable To Change Settings In Power Manager?

Mar 3, 2011

How can I set it so that the account can change the settings in power manager? They're all grey'd out and unchangable And when I click on hibernate, it says suspend and hibernate are only supported through HAL, which is unavailable. I'm sure that hald is running.

View 10 Replies


ADVERTISEMENT

Slackware :: When Change The Bright Of Screen - Xfce Power Manager Show A Info Bar - Now It Disappear

Aug 3, 2010

I'm running Slackware64 13.1. When I change the bright of my screen, xfce power manager show a info bar. But now it disappear, when I run xfce4-power-manager from a terminal I get this info:

Quote:

Another thing, Slackware don't have cpu governors?

View 7 Replies View Related

Ubuntu :: Configuration Settings For The GNOME Power Manager

Mar 22, 2011

Have not been installed correctly.

This message comes up as I am logging into my account. Upon entering my password it goes back to the logon screen.

Booting into recovery mode and different kernels doesn't help.

View 2 Replies View Related

OpenSUSE :: 11.4 KDE Change Power Settings For Display?

May 15, 2011

how to disable the power settings for my monitor so that it always stays on.

View 2 Replies View Related

Ubuntu :: How To Change Power Settings In Natty

May 17, 2011

How do I change the power settings in Natty? Such as when the monitor shuts off?

View 1 Replies View Related

Fedora :: Change Power Settings To Stop Instant Hibernation?

Jun 28, 2011

I'm coming over from Ubuntu and am experiencing the same power issue I had there, only there doesn't seem to be a setting in Gconf in Fedora like there was in Ubuntu that can fix it. You know how the system determines whether or not to hibernate based on the amount of time the battery has been unplugged? Well there's a bug in Gnome that makes it say I have only two minutes left on a full battery,

so if I ever unplug my laptop it immediately goes in to hibernation. Now in Ubuntu there was a Gconf Editor setting that could be changed so that it went by percentage, but this option seems to be gone in Fedora. I have Gconf Editor installed but I can't find the setting anywhere.

View 4 Replies View Related

Slackware :: Error Building Gnome-power-manager 2.30

May 20, 2010

I use Slackware 13.0 with the 2.6.33.2 kernel, and I use GnomeSlackbuild.I tried to get help on their discussion group, but I didn't get any.I'm trying to build gnome-power-manager 2.30, because it uses the new upower interface (so it seems). I have GTK+ 2.18.9.

View 3 Replies View Related

Slackware :: Xfce4-power-manager-1.0.1 And No Battery Options

Oct 17, 2010

I noticed that there is a 1.0.1 version of xfce4-power-manager, so I tried it out last night. Note: It requires libxfce4ui >= 4.7. I compiled it using the same SlackBuild script as the one in Slackware 13.1. It compiled and installed just fine. However, when I logged out of XFCE and logged back in, I could only set a few options, and battery options were completely non-existant.

I double-checked, and my user account in in the power group. Has anyone else had a similar problem? In the meantime, I've downgraded back to the 0.8.5 version that Slackware ships with.

View 3 Replies View Related

Ubuntu Installation :: Unable To Change BIOS Settings Due To Which Can"t Change Boot Preference?

Mar 24, 2011

I currently have a Windows XP OS which i want to dual-boot with Ubuntu Linux 10.10 . I put the disk in the drive and chose the option to install Linux through Windows. But it hangs in the middle. I am also unable to change my BIOS settings due to which i can"t change my boot preference. My first Boot is the HDD. I want to change it to CD-ROM. Any suggestion? I also have another PC where i can boot through the CD...I tried installing there by booting from the CD but i get this error message after seeing the purple Linux screen with the loading dots. "(Process:286):Glib warning**:getpwuid:failed due to unknown user id (0)

P.S.- I am not able to see any options while the boot is going on

View 5 Replies View Related

Slackware :: Missing Xfce4-power-manager Icons In Xfce 4.8

Jun 25, 2011

I'm using Slackware64 13.37 with Robby's Xfce 4.8 build on a laptop with two batteries. I've noticed that when the charge for one battery is depleted, the empty battery icon for the xfce4-power-manager panel applet is displayed as an "image missing" icon (see the attachments for screenshots of how this progresses).

Is this just down to a missing image, or is it more subtle than that? Has anyone else had the same problem, and if so how did you fix it? So far I've tried clearing the GTK+ icon cache and reinstalling the hicolor icon theme package as suggested in other threads in this forum, but nothing changed.

View 5 Replies View Related

Slackware :: Laptop Screen Not Switching Back On When Powered Down By Power Manager

May 23, 2011

My power settings is set to put the laptop screen to sleep after some minutes of inactivity. This works fine, however it doesn't want to come back to life if I move the mouse, type etc...

View 16 Replies View Related

Slackware :: Change Gnome Wallpaper On Power Resume Screen?

Mar 28, 2010

I got Slackware 13 installed with GNOME SlackBuild v2.26.3 I am trying to find where the wallpaper of power resuming screen is siting on, I mean, after the power was resuming (after hibernation mode for example), you have the screen where you should type your password to logon back to the system, so does someone one where is it?

View 1 Replies View Related

Debian Multimedia :: Xfce4-power-manager Doesn't React To Power Button / Fix It?

Jun 4, 2010

I use Squeeze with Xfce. My problem is that recently (after the xfce updates) the xfce power manager doesnt react to the power button - it is set to suspend. I dont have gnome-power manager or anything like it running.
If i reboot the computer, the power button will work but if i suspend and resume, it doesnt work again.
The computer is built on an Asus M3N78-VM mobo (2GB RAM/Athlon3200+ single core).

acpi_listen detects the button press.

Any thoughts?

View 2 Replies View Related

OpenSUSE Hardware :: Unable To Change Nvidia Settings?

Sep 4, 2010

I'm having the following problem with SUSE 11.3 and my Nvidia Geoforce 7300 GT. I have the driver installed but am unable to change the resolution in the Nvidia configuration X-Server. It seems it is limited to the following 640x480 and 320x200. fix this as it looks awful and I know that I should have greater resolutions.

Please find my xorg.conf listed below

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 256.53 (buildmeister@builder97.nvidia.com) Fri Aug 27 20:55:22 PDT 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"

[Code]...

View 9 Replies View Related

Ubuntu :: Unable To Change Login Settings / No Seat ID Found

May 10, 2011

I click unlock repeatedly but nothing happens... I ran it in terminal and got this

Code:
sudo gdmsetup
[sudo] password for wordsmith:
** (gdmsetup:5106): DEBUG: init delay=10
** (gdmsetup:5106): DEBUG: "/usr/share/xsessions/une-guest-restricted.desktop" is hidden or contains non-executable TryExec program

** (gdmsetup:5106): DEBUG: "/usr/share/xsessions/guest-restricted.desktop" is hidden or contains non-executable TryExec program
** (gdmsetup:5106): DEBUG: "/usr/share/xsessions/une-efl-guest-restricted.desktop" is hidden or contains non-executable TryExec program

** (gdmsetup:5106): DEBUG: Init default session found:'xsession'
** (gdmsetup:5106): DEBUG: Failed to identify the current session: Unable to lookup session information for process '5106'
** (gdmsetup:5106): WARNING **: Unable to find users: no seat-id found

View 9 Replies View Related

Slackware :: System Settings Was Unable To Find Any Views

May 6, 2011

I did a upgrade from 13.1 to 13.37 both 64 bit.Then I had the urge to checkout KDE 4.6.2 Now there the wheels came off :I get this message trying to start system settings.System Settings was unable to find any views, and hence has nothing to display.Anyway its my fault had a wrong version in the directory I installed from.

View 1 Replies View Related

Ubuntu :: Unable To Change Natty Clock Settings In Unity Menu Bar?

Apr 27, 2011

I recently upgraded my clean install Ubuntu Studio 10.10 64bit to Natty 11.04 and whilst everything is working well (except for having no plymouth boot splash - but I'm looking into this) I have noticed that when I log in to the "Ubuntu" desktop (with the Unity launcher and Menu bar in the top panel) I can't seem to change how the time and date is displayed. It seems to be stuck showing 24 hour time only with no date no matter which setting I select in the 'Clock' tab of 'Time & Date Settings' menu.

The clock applet works perfectly when I log into the 'Ubuntu Classic' desktop and I am able to display the date and weather ok.

I have a laptop which I upgraded from Ubuntu 10.10 64bit to 11.04 as well and it doesn't have the same issue.

I thought it might have been a rouge Gconf setting so I dumped my entire gconf using

Code:
gconftool-2 --dump / > ~/Desktop/allgconf.entries

then restarted into recovery and removed my ~/.gconf folder entirely, rebooted again and logged back on. Apart from losing some settings like Evolution and Networking, which I reloaded, and my theme going back to the default theme, the problem still exists.

View 9 Replies View Related

General :: Unable To Change A NVIDIA Control Panel To Adjust My RGB Settings

Jan 23, 2011

In a previous version of UBUNTU I was able to enter a NVIDIA control panel to adjust my RGB settings. Now I'd like to change it slightly but there doesn't seem to be a NVIDIA control panel. There used to be two of them. After installing the video driver, If I tried to go into UBUNTU video settings I would get a console message stating I now need to use NVIDIA control panel and would automatically open it for me.

View 1 Replies View Related

Debian Configuration :: Unable To Find Any Suggestions On Settings To Change In Bittorrent Client

Jan 9, 2011

I am currently using Debian Lenny and am having problems with my pptp vpn client. I can use the following software for as long as I like without my pptp vpn connection dropping out:
(1) iceweasel
(2) icedove
(3) gtk-gnutella

If a use a bittorrent client, however, my pptp vpn connection drops out within a few minutes. I have tried these bittorrent clients: transmission, deluge, tixati. Enabling or disabling the firewall makes no difference.I have searched pptpclient.sourceforge.net and Debian User Forums but have not been able to find any suggestions on settings to change in a bittorrent client.

View 1 Replies View Related

Ubuntu :: Unable To Install "Simple Compiz Config Settings Manager"

May 31, 2011

Am not able to install "Simple Compiz Config Settings Manager" When I try to install via Ubuntu Software Center (running unity) I get the following messages: "Package dependencies cannot be resolved" "CCSM has unmet dependencies". How can I resolve this issue to install Simple compiz config settings manager ? Is there a workaround ?

View 1 Replies View Related

Slackware :: Unable To Change Time In KDE4.4.1?

Mar 29, 2010

I am currently running KDE4.4.1 from AlienBob, and now with the change to BST I noticed that my clock hasn't changed. So I go to change it through SystemSettings and it shows a message thus:-

Quote: You are not allowed to save the configuration

This happens as both normal user and root. Googling around seems to suggest this error is tied to a Kauth/PolicuKit/polkit problem, which aren;t provided yet in Slackware as far as I am aware.

View 5 Replies View Related

General :: Unable To Change Screen Resolution On Slackware 12.2

Mar 8, 2010

I am unable to change mu screen resolution in slackware 12.2. I am editing the xorg.conf in "etc/X11/" with nano. My graphics card is a ATI with 64MB RAM. My monitor is capable of 1280x1024 @ 60Hz. Heres the xorg.conf:

Code:
# File generated by xf86config.
# Copyright (c) 1999 by The XFree86 Project, Inc.
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions: .....

View 2 Replies View Related

Ubuntu :: Change File Permission Settings To Force All Documents To Inherit Parent Document Settings?

Aug 21, 2011

i have a computer with 3 users on it, and a folder using samba that everyone on the network has access to. Lets say that, the folder is stored in /etc/sharedfolder. What happens is, when user1 puts a folder in it, then logs off, user 2 attempts to modify it and fails, because permission is set to 755, and they are not in the same group. (even if they were, it should still need to be 775) Anyway, my current solution is, every 5 minutes a crontab changes permission like so: chmod 777 -R /etc/sharedfiles && chown useradmin:superadmin -R /etc/sharedfiles Which works, but seeing as there is getting close to a gig in there, this is a bad solution, as it eats up the computers resources. Solutions that i think might work:

1) create a script that only changes permissions that need be changed.
2) change file permission settings to force all documents to inherit parent document settings

View 9 Replies View Related

Ubuntu :: Power Settings Not Used

Mar 30, 2010

I turned off laptop dimming and a few other settings in the power management app, but these are not used so as soon as I watch a film on batteries or otherwise it dims the screen! I tried to search the forums but it won't let me search for terms like ignored or unused

View 1 Replies View Related

Ubuntu :: Desktop Power Settings Ignored

Jan 29, 2011

I was up all night trying to set up for a switch from Linux Mint 10 32-bit to Ubuntu 10.10 64-bit. For the most part, the migration has been successful. However, I'm having an issue with the power management settings: even though I've told Power Management to never turn off or lock the display, it does so anyway. I've saved it as default, rebooted, and still the same - after several minutes, the screen turns off and shows the lock screen when I wake it up with the mouse.

View 1 Replies View Related

OpenSUSE :: Power Management Settings Are Not Saved?

May 22, 2011

I've got openSUSE 11.4 64 bit system with stable 2.6.38 kernel and KDE 4.6.3. Problem is that when I want to change some settings in the power management (like brightness, screen energy saving time-off, display dim), they doesn't seem to save, even after the X restart and full reboot. It's seems like screen energy saving is set permanently for couple of minutes, don't matter what time do i set, it just discards my settings, even they are correctly viewed in the gui.

View 9 Replies View Related

OpenSUSE :: No Power/Energy Profiles In System Settings?

Aug 21, 2011

It appears my profiles are gone, and thus i have got no way in changing settings in the 'Desktop Configuration' (Systems Settings)so, when I go toapp starter --> Configure Desktop --> Power Mgmtthere are NO profiles under 'global settings' or 'power profiles'anyone has got an idea what's cooking here

View 9 Replies View Related

OpenSUSE Hardware :: Power-management Settings Keep Vanishing

Aug 15, 2011

Just found my PC with screen fully lit a good half-hour after leaving it. Went into "system settings" and checked the power-management settings and, as I expected, there were no management profiles. "Here we go again" I thought and logged off and then back on again. Checked the settings and there was "performance", the only one available. As usual in this situation, I'd tried "restore default profiles" and there were none.

Why does this profile keep getting lost in this manner? Where is it (and defaults if any?) supposed to be stored?

Graham Davis, Bracknell, Berks.
openSUSE 11.4 (32-bit); KDE 4.7.0; AMD Phenom II X2 550 Processor;
Video: nVidia GeForce 210; Sound: ATI SBx00 Azalia (Intel HDA);
Wireless: BCM4306

View 3 Replies View Related

Ubuntu :: Screen Shuts Off No Matter What Power Settings Are?

Aug 24, 2010

running xubuntu 10.04 on an older machine and no matter what the power management settings, the monitor keeps being turned off.Is there any other way (command line, maybe) to completely turn off the monitor power management?

View 3 Replies View Related

Ubuntu :: Power Management Settings At Login Screen?

Nov 26, 2010

How do you set power management (suspend/sleep time is what I'm after) that applies at the login screen?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved