Slackware :: Video Settings On Dual-dvi Out Card
Feb 2, 2011
Finally replaced my incredibly antiquated Ti 4200 with a GeForce 9600 GT, but I'm having a few problems. The main one would be that I can't see anything when I drop to terminal (the monitor shuts off)- I could when I had a spare svga monitor hooked up through an adapter, but now I'm using dual DVI monitors. Do not have an svga cable to spare at the moment. The second seems to be a doublethink problem- a good while back when this computer was a fresh install, I could have sworn I had the option for the resolution 1680x1024- this is an *essential* resolution for twinview, because my second monitor is 1280x1024, and setting this widescreen to 5:4 is just... wrong.Simple restart solved the terminal issue (I hotplugged the monitors). Resolution thing is still a standing issue. I have a 1050 capable monitor, but the display portion is an inch shorter than the widescreen.
View 3 Replies
ADVERTISEMENT
Mar 17, 2009
I have 2 screens connected to my nVidia 8400GS and would like to change my video card settings so that the system boot shows in the Digital screen and not in the Analog one.
View 3 Replies
View Related
Apr 18, 2010
I can play QL fine, however when I change video settings from within the game playing full screen and click apply video settings, the screen flashes white briefly(normal for games to do this) however it then does not return me to the game. I can hear the sounds, and I am apparantly in the game because I can fire and move...I just can't see anything. All I see is the firefox window I launched it from, however I can not interact with the firefox window in any way. Clicking anyway just fires in the game that I cannot see..
View 1 Replies
View Related
Feb 25, 2010
I am looking to build a new desktop. What is the lowest end video card that will fits the following:
Supports 2 monitors at 1920x1200 or 1600x1200
Works with Linux.
3d performance isn't much of an issue, since I don't play computer games. I use the computer mostly for programming, which is why I like having the large resolution, so I don't have to scroll around so much.
View 2 Replies
View Related
Jan 11, 2010
I currently use "MSI Radeon HD 3650 Graphics Card - ATi Radeon HD 3650 750MHz - 512MB GDDR3 SDRAM - PCI Express" that have no HDMI and some problems with Ubuntu. Due to the Ubuntu compatibility problems I decided to ask you guys for recommendations before upgrading to a new video card.The only "demand" is that the card must have dual HDMI outputs, one for the monitor and one for the TV.
View 6 Replies
View Related
May 20, 2010
Can any recommend a PCIe video card for my AMD64 box?Looking for one which basically has a good working driver:
- can do dual head using DVI and VGA output.
- open source preferably, I've used the nvidia proprietary one before, was fine but kernel upgrades became a pain.
- passive heatsink so it's silent, doesn't need to be a fast card since my other two were both onboard graphics.
- driver can do KMS for nifty high res console.
- most typical features work, so Mplayer plays nicely and can scale to full screen etc. (xv output +/- accelerated decoding)
- even a bit of light 3D for openarena or compiz would be nice.
- don't mind buying second hand if they aren't available new
I've had a Nvidia 7050 on board which was ok, fast enough, but upgrading with the proprietary driver became painful, and that motherboard is dying a flaky death.
- The nouveau driver looked promising, but wasn't really in Debian at that stage. But I did once accidently boot a high res console while testing a brand new kernel (2.6.31 I think) and was blown away Currently got an ATI RS880 [Radeon HD 4200] on board which is fine, 2D is fast enough, but the open source driver isn't finished yet. It can't do dual head (horrible distortion and crashes), can't suspend to ram (freezes), Xvideo and any form of 3D acceleration are missing.
View 5 Replies
View Related
Jan 9, 2010
I just got another video card from a friend and I wanted to see if I could get it to display a second screen. I have two monitors, both VGA CRT monitors. The first video card is a Geforce 8400gs pci-e and the card given to me is a Geforce FX 5500 pci. I could get them both to work separately under low graphics mode when I go into the bios and switch the video adapter from pci-e to pci, but not together. What to do to make both cards work in harmony?
View 4 Replies
View Related
Apr 23, 2011
I have an image generator (IG) running 64-bit Ubuntu Linux, GNOME & the SAGE application all running through an NVIDIA Quadra FX4500-X2 (dual GPU). Had to install a new FX4700-X2 (and the latest drivers) because 4500's are unavailable. The computer works fine except but I cannot watch the whole boot up sequence on the same DVI port anymore.On the 4500, all video came out the lower DVI port of the GPU with the PCI-X connector (let's call that the "a" GPU). But on the 4700 card, the screens you see during boot are divvied up between the lower DVI port of each GPU. The POST screen through Ubuntu splash screen comes out the "b" GPU while the "a" GPU is blank. The SAGE Initialization page and SAGE Desktop comes out the "a" GPU while the "b" GPU is blank.
I logged in as root and looked for a GNOME menu allowing me to force all video through the same GPU & DVI port, but couldn't find anything remotely close. Any suggestions on where I can look? Technically this IG is working, but I want to fix this to avoid future wild goose chases. The system uses 52 of these IG's.
View 2 Replies
View Related
Nov 24, 2010
I have repeatedly installed CentOS 5.5 64-bit on a Dell T3500 with an nVidia Quadro FX 580, in an attempt to get dual monitor support to work to no avail. Everything works fine when just one monitor is plugged in and I do not try to enable or plug in a second monitor. I have installed the Dell DKMS, and the Dell recommended drivers (from Dell site) on one installation, I installed the nVidia drivers (from nVidia site) on another, and have tried with what CentOS loads by default on another. The results are the same every time: When I reboot as directed I get a black screen. I can recover by hard shutdown and unplugging one of the monitors, but that doesn't solve my problem. Has anyone had a similar experience, or have any helpful guidance? I am not very Linux savvy. This is for multiple machines in a corporate environment.
Information for general problems.
== BEGIN uname -rmi ==
2.6.18-194.26.1.el5 x86_64 x86_64
== END uname -rmi ==
== BEGIN rpm -q centos-release ==
centos-release-5-5.el5.centos
== END rpm -q centos-release ==
[Code]...
View 3 Replies
View Related
Oct 11, 2010
I'm putting this here because it's so weird nobody will think of it, and I need help. I installed Slackware 13.1 a couple of months back. Today, I decided I wanted to hear something. But the video card's hdmi thing took over as the sound device. lsmod sees more snd modules than you've had hot dinners (all ac97 stuff & hda_intel stuff)ls /dev/dsp* just showed /dev/dsp1The sound is some crappy little ac97 thing (CMI9761A) and the video is an ATI/AMD hd4650. I got the ac97 'back' by removing agpgart from the /etc/rc.d/rc.modules script :-o, Now I have /dev/dsp (only) and sound works
View 3 Replies
View Related
Feb 20, 2010
System:
Slackware64-Current multi lib
What would be the easiest method to record video from a security camera via a video capture card using a gui?
View 2 Replies
View Related
Jun 17, 2011
Kernel 2.6.21.5, slackware 12.0
When you do 'man bash', you'll see some words are highlighted. I'll say that the video card has used high intesity in these instances. How do I disable this video card capability? Can this only be done by recompiling the kernel? Of course, I am talking about the text consoles, i.e., the video card in text mode.
View 2 Replies
View Related
Jul 15, 2010
Here goes the problem: I have a Amilo M7400 notebook with an Intel 82852/82855 GME video card, and X is a bit uncompatible with it.I've tried using the vesa driver in the xorg.conf, but when i start Xserver, it hangs hard in a blank screen. I can't open a new terminal and control+alt+backspace won't work.
what can i do? is there a log file for X which details the initialization of it?
View 8 Replies
View Related
Jun 24, 2010
I've been playing around with Damn Small Linux 4.4.10 on my Dell Inspiron 3000 laptop for quite a while now, and this is the first time I've been downright stumped. To make a long story short, I'm trying to play 480p video on a machine with a 233 MHz Pentium processor, 112 MB of ram, and a Neomagic MagicGraph 128XD graphics card (NM2160). Crazy? Maybe, but I don't think so. I'm using MPlayer set to Xv mode with the XFree86 4.3.0 server, and so far, I've been able to get it to play 360p mpegs with minimal stuttering. However, MPlayer crashes with 480p. This is because the 128XD only has 2 MB of memory, which, after the 1024x768x16 screen takes its share, doesn't leave enough room for a 640x480 overlay.
The creators of MPlayer are aware of this limitation, and suggest adding the following line to my XF86Config file: Option "OverlayMem" "829440"
As I understand it, this is supposed to extend the video card's frame buffer into system memory, thus allowing the higher resolution video to play. However, it doesn't work, based on this output from my XFree86 log file: cannot reserve 829440 bytes for overlay...
Some other suspicious-looking lines from the log file:
View 3 Replies
View Related
Jan 25, 2011
If I take out the existing video card and put in another one of a different type (but not a different brand), how does Ubuntu behave? I know what Windows typically does. Windows starts up the screen using a default video driver which is at least 1024 by 768 and then asks you what this new bit of hardware is and asks where the drivers are. I'm pretty sure Ubuntu has default drivers of its own, but I don't know what their resolution is.
View 3 Replies
View Related
Mar 22, 2011
I recently bought a video card for my pc. I had it running pretty nicely on Ubuntu10.10, I started windows and later restarted and after that it wouldn't get past the Graphic cards bios. this is rather odd isn't it? I suspect it maybe dead or that my motherboard bios is stuffed but i reset that too and it still wont go.. The specs are Pentium4 Proccesor 1gb ram motherboard 661gx-m7 Nvidia GeForce FX5200 DDr128mb
View 5 Replies
View Related
Jun 19, 2011
Got a bit of a problem where xorg can't start kdm. I pulled out a dying AGP card to try and switch to onboard video, and I think the previous configuration is gumming up the works.I've been running this system for quite a while, as you'll be able to tell from the version numbers.Would like to avoid having to transport my Amarok databases to a new server. I make heavy use of the song ratings and whenever I try to transport the database from the old system to a fresh build I have to spend hours relearning sql commands.Any ideas how to either fix the resolutions on the ATI or (preferably) get KDE to start on the onboard graphics?
View 3 Replies
View Related
Jul 15, 2010
My video card developed problems, so I followed the suggestion in this thread:
Quote: Boot into recovery mode, then choose root, for a command prompt and enter
Code: dpkg-reconfigure -phigh xserver-xorg
but my ubuntu 10.04 32-bit system still won't boot. Shortly after the ubuntu logo comes up, before the login, my screen goes black and there is no more video signal. What else can I do to reset the video configuration? The card only has this info on it: I could put the card back in the system, reboot, and then pre-configure the system to drop to the intel 865G on-board video, but the msi card has intermittent problems and will spontaneously re-boot several times during the first ten minutes of turning on the system.
View 6 Replies
View Related
Jun 12, 2010
My system: Pentium 4 3.6 GHz, 3 Gb DDR ram, GeForce 210 video card, Ubuntu 10.04.
I have previously used Cinelerra-cv (on Karmic) and recently Openshot (on Lucid) with not much trouble. I have been sampling other video editors (Kdenlive, avidemux, kino etc). Now I have my video card crashing whichever I use, mainly when trying to load clips. I have disabled Compiz, uninstalled all video editors and then reinstalled one at a time. I still get early video crashes whichever I try.
View 1 Replies
View Related
Jun 29, 2011
how to on enable ling separate X sessions with dual monitors in slackware? In rhel all I have to do is enable it under the nvidia-settings... In slackware it does not work that well... to what I understand you have to configure a separate x session...
View 11 Replies
View Related
Jul 18, 2011
I'm trying to install Puppy 525 on my Slackware 13.37 PC as a dual-boot using LILO. Puppy is living, all on it's own, in sda6, a 6 GiB partition. It got there by using the Puppy Universal Installer and selecting a 'Full' install, not a 'Frugal' install. I cannot find 'LILO' type instructions, only 'GRUB' type instructions.
Has anyone succeeded in doing a hard drive install of Puppy with the LILO boot loader?
Edit: I'll probably regret it, but I used Puppy's GRUB installer.
View 17 Replies
View Related
Oct 27, 2010
I installed Slackware 13.1 and Windows server 2008, I also installed LILO in MBR, I Found I can boot into slackware, but can't boot into Server 2008. then I　use command bootsect/fixmbr. now I can boot into server 2008, but the problem is I can't boot into slackware. I try to install lilo to supper sector. it's not works. I only can boot my slackware by a USB stick.who can help me to solve this problem? I really need these two systems.
View 5 Replies
View Related
Dec 24, 2010
I'm running openSUSE 11.3 64 bit KDE 4 standardI have two monitors attached, running simultaneously, nicely, all is well.But when I reboot I have to set them up again because the settings don't stick/endure through a reboot.The GUI configurator that I use is at Menu --> Config Desktop --> General --> Display.How do I save the underlying settings and re-invoke them at boot time, perhaps from the CLI? Or some quick process that will do the job.
View 8 Replies
View Related
May 29, 2010
I just did a fresh install of slack 13.1 on a separate drive to the one I was previously using. I've been having trouble getting lilo to work, so that I can choose between either drive. Lilo is currently installed to /dev/sda, with the old system on /dev/sda1 and the new installation on /dev/sdb1. I keep getting errors like these:
Code: Fatal: Trying to map files from unnamed device 0x0011 (NFS/RAID mirror down ?)
I managed to install lilo from the old system by copying the kernel image from the new system into the /boot/ directory and running lilo. I am now on the new system and trying the same thing in reverse but it isn't working. I have searched around a bit and there's a lot of talk of chroot-ing into the other partition to run lilo. I don't understand why the process isn't working both ways though. I can't run lilo on my new installation even with the two kernel images in the local /boot/ folder. Is this something to do with btrfs or am I missing something to do with lilo? This is my lilo.conf file. I am trying to run lilo using this file from my new installation on /dev/sdb1 and getting the error given above.
[Code]...
View 13 Replies
View Related
Sep 19, 2010
My new job requires I use Windows and as such I put a second HDD in my laptop for the purposes of Window/Work The issue is that Windows will not install on this second disc (Windows cannot create partition or install to disc). I got around this by installing Windows to the first disc, then the second then putting Slackware back on the first but then I suffer the "Bootmgr cannot be found, press ctrl + alt + delete to restart".
I am using Lilo and I have never really had an issue dual booting them on the same disc (Admittedly over a year ago) but it is of the utmost important I have them on separate Discs. Has anyone encountered this and/or know a way around?
View 4 Replies
View Related
Aug 29, 2010
Kubuntu 10.4DVI-0 SyncMaster931BFDVI-1 BenQ G2220HDAI set the monitors with Display SettingsEverything works fine until rebootI lose my settings and always returns to the initial state
View 4 Replies
View Related
Jul 9, 2011
I currently have a problem with my nvidia settings
I reinstalled 11.04 kubuntu recently and I no longer could use my second screen.
I looked into my nvidia settings and enabled my second screen (separate x screen).
However when I do so and press apply the second screen does nothing.
This is two desktop monitors and not a laptop and a monitor.
View 3 Replies
View Related
Sep 4, 2009
I just did a fresh install of Fedora 11 and the only video resolutions available were 640x480 and 800x600.
The native resolution of the monitor is 1280x1024 and that's what I'd like to use.
I was able to get the display to the proper resolution with the following commands:
Code:
However, rebooting sets it back to 800x600. I have seen the edits to xorg.conf but that file wasn't created.
Is there a way to make the 1280x1028 resolution persistent without creating a xorg.conf file?
View 8 Replies
View Related
Jul 5, 2011
Im trying to setup my configuration but i don't know how.I got dvi-hdmi adapter on Eee pc box 202 and when monitor(19lcd tv) is connected to power source everything is fine but if is switched off doesn't.Mean starting and stopping probably something with auto configuration (video),because when i connect dvi-vga adpater even on off monitor it's does work.Any idea how to correct pernament setting in Kde?So when connected via dvi-hdmi and off monitor -doesn't start fully system..If connected via dvi-vga does work fine
View 2 Replies
View Related
May 24, 2010
I've purchased Creative sound blaster. It's external usb sound card, which worked well as I plugged it in. In sound preferences it was setted to 'Analog stereo output' in hardware, and I've accidently messed up with Connector droplist in Output bookmark. As a result - silence in my speakers. I wonder what went wrong and where to search for it. The card is worked and it is supported by ALSA. Just some settings went wrong.
View 1 Replies
View Related
