how to make a user, not root, connect to internet? without having to type as root:Quote:# pppoe-startin an ADSLAlso ... to exit the Internet having to type, also as rootuote:# pppoe-stopBuilding on the topic: Is there a graphical interface for ADSL connection ?
View 1 RepliesI've set up a permanent DHCP lease for my MAC address. I did this hoping to resolve the fact that I share my Internet ADSL connection with my wife and my daughter (the latter a great bandwidth hog)!
View 5 Replies View RelatedI have an adsl modem acting as a bridge to my router my setup was working well for more than year now , but then the internet went slow . I set the modem back to PPPoE the problem was with the DNS server of the ISP so using ifup i set the dns t 8.8.8.8 (google) the connection is back , but when i set the modem back as a bridge slow internet does the router know that my dns is 8.8.8.8 or i should set the dns on the router ? I can't see an option to set the dns on the router ( i just enter my username and password from the isp to use PPPoE mode ) by the way i called the isp support they kept telling me to restart , i told them i did but i never restarted my pc . I'm sure if i tell them i'm running linux they will blame the os !
View 2 Replies View RelatedI installed slackware 13 in virtualbox (full installation), but I have not internet (ADSL). I tryed adsl-setup, but there aren't that commant. Tryed pppoe-setup, netconfig, but again I have not connection. Where is the problem? And I have one more question about Fluxbox. I have not display, wallpaper, icons...only menus.
View 3 Replies View RelatedEvery now and again my internet drops out for no apparent reason. I try dhcpcd -k eth0/dhcpcd eth0 and nothing. I try modprobe -r <driver> modprobe <driver> dhcpcd blah blah and nothing. /etc/rc.d/rc.inet1/2/d restart. Nothing. The only thing that works is rebooting my system. how to reset my connection without rebooting?
View 7 Replies View RelatedI have always been using one ADSL connection (ppp0) with squid.My question is, is it possible to add another ADSL connection to the same box.If yes how does the route works.Is it possible to switch to one ISP to another by just changing the route?
View 1 Replies View RelatedDoes anyone know how to install Firefox Add-Ons without an Internet connection? I need to install Firebug on a Slackware 13 machine that's not connected to Internet
The version of Firefox is 3.5.2.
I'm using ADSL connection as a way to access internet.All of us know that in windows we can get configed easily.But it is a little more difficult in Fedora.How can we config ADSL connection in Fedora 10?My modem uses dynamic ip.
View 14 Replies View RelatedI have an ADSL connection without a fixed IP address. Is there a clever way of finding it out so that I can log into a local IMAP server from the Internet without phoning up to ask for the IP address?
View 4 Replies View Relatedis there any problems with making adsl connection in ubuntu 10.10. Recently I've had ubuntu 10.04 and there was a problem with making adsl connectio so I was forced to you terminal in order to connect to internet. I'm asking you this because I'm planing to install Ubuntu again but if there is still connection problems then I wouldn't install ubuntu
View 5 Replies View RelatedI have been successfully using my speedtouch usb 330 for years.
Now suddenly something weird occurs.I manage to stay connected a few minutes, afterwards the line drops down and I can't reconnect.
I switched the connection script to "verbose mode" and what I get is:
It seems that I can't get an answer from the provider, but if I reboot it connects at first attempts, but the connection falls down again after a few minutes.
I have dual boot. No similar problems is affecting the connection under Windows, so some hardware fault is ruled out as a possibility.
I have an ADSL line that allows me for maximum of 4 concurrent users with external IP addreses. The IP addresses are not static (they change every 3-4days).
My current setup is as follows:
* A-link Roudrunner 44B Modem connected to the main line
* D-Link DI524 Router (port 1) connected to the modem
* This leaves me with 3 ports and Wireless for my other machines
What I wish to do is:
* Have all my machines with static IP addresses for LAN
* still have internet connection
I've tried enabling DHCP on the D-Dlink Router with LAN IP 192.168.0.1 and IP range from 192.168.0.100 - 192.168.0.199. Then gave my machine static IP 192.168.0.101, subnet 255.255.255.0 and gateway 192.168.0.1....obviously it didn't work. I've tried the above with both the modem being connected to the router via port1 and WAN port... but I have the same results. I also tried to do the same without the router (direct connection between the PC and modem) still got the same results. Could it be that what I am trying to do is not technically not possible due to my ISP setup to ensure no more than4 concurrent users limit is in place.
i have 2 laptops dell d410 whit slackware 13.7 on them .i had some problems with one (one pad) and i have changed some components from one laptop to another : some ram ,wireless, internal modem .now i don't have internet connection from slackware . if i boot slax it's all ok.
View 2 Replies View RelatedIs it possible to upgrade a Slackware installation from a freshly d-loaded DVD? How would one go about this? Would the procedures in the Upgrade.txt work? I would assume they would need to be modified a bit, though, since I'm only upgrading the same version of Slackware. I'm not going from say 13.1 to 13.37. I just want to update a 13.37 current that I installed about three weeks ago to the now final release 13.37. If I could get my silly Trendnet TEW 423IP wireless PCI card to work in Slack, I could upgrade the normal way with Slackpkg.
View 6 Replies View RelatedI have D-Link GLB502-T ADSL router with MTNL TriBand connection.I am currently using Fedora 10. I have successfully setup the ADSL router in bridge mode, and can connect to net using network-manager.
Now I need to know how to start this connection using command-line. I intend to schedule auto restart of the connection for my night unlimited connection.
"I am new to Linux. Could you please guide me how to make ADSL bridge connection. I have tried to make connection using Network manager. But, it some times works and some times doesn't works."
View 1 Replies View Relatedhow to make pppoe (ADSL) connection on fedora 12
View 2 Replies View RelatedI just configured my (dataone) ADSL connection and now it stops intermittently. Can anyone tell me why this happens and what is the solution for this.
View 1 Replies View RelatedI have an valid account,and I used pppoe-setup to set the dial correctly.After the configuration,I typed "ifup ppp0",nothing wrong happens(no news is good news?).Then I typed "pppoe-status",it said I've connected to the internet . I opened firefox,updated my system through yum ,they all said I haven't connected to the network!!!I've formated my harddisk and reinstall my system,but the problem is still.
View 4 Replies View Relatedhave a netopia 3347-02 Wireless ADSL Gateway that i got from at&t. i am no longer with at&t.i switch over to cox. I have the cox modem. i also have cable on the modem. when i connect a ethnet cable from cox's modem to my laptop my internet works. but i want to use the netopia 3347-02 Wireless ADSL Gateway that i got from at&t cause of the wifi. when i login & connect to the netopia 3347-02 Wireless ADSL Gaut it in bridge mode.internet works fine, but im not able to use wifi, im also not able to login into the admin page. i have to do a factory reset on it so i can log back in. So how can i make it work with cox modem?
View 4 Replies View RelatedI downloaded openSUSE-11.4-KDE-LiveCD-i686.iso from software.opensuse.org: Download openSUSE 11.4 yesterday.It's a liveCD,not a DVD. Then I used a dd command to make a live USB by the instruction from this page:SDB:Live USB Then I shut down the computer,and boot from the usb. I went to the yast--DSL to make a new adsl connection.But after I configured everything,yast told me one package needed.The package's name is "linux-atm-lib". I haven't connected to internet.How could I do to install a package and make a connection?
Now I am downloading a DVD.Does a DVD include the package called "linux-atm-lib"?
what is the command for surfing Internet via ADSL?
View 9 Replies View Relatedhow to connect to internet via ADSL,and wireless. i am writing all these frome windows
View 2 Replies View RelatedI'm a beginner in Ubuntu, I'm using Ubuntu 9.10.
Currently using a Dlink GLB-802c router and using a ADSL connection. I try to connect to the Internet but it is unsuccessful. Ubuntu is not indicating my router when I connect to the PC.
My PC is P4 and using USB to connect to internet, PC haven't a Ethernet interface.
i have a leased line ( speed 2 MB ) which we use to connect to our mail server , oracle ERP etc.. we have a dhcp scope defined as 192.168.100.1-192.168.101.254. with a default gateway as 192.168.100.90 ( which is a cisco router ) we have a pix firewall ( 192.168.100.10 ).. now the gateway passed all the request to firewall..
we have an ADSL of 4 MB speed.. ip is 83.*.*.230 from ISP. i have a proxy server ( squid ) eth0 is connected to ISP (83.*.*.230).. eth1 to LAN ( 192.168.100.79 ) now the problem is when i put default gateway to eth1 ie 192.168.100.90 the squid connects to internet via leased line.. if i leave the default gateway field empty on eth1 , the squid connects to internet via ADSL ( which i want ) but the problem is no one on the lan cant ping the squid server ( no connectivity to internet for the whole LAN ) how can i solve this problem? i want squid to connect to internet with ADSL, but if i put gateway on eth1 ie LAN squid goes through leased line which i dont want to happen.
I want to configure my ADSL but I don't know what should I do. Can you explain me How can I configure it?(I use fc10, ethernet cable <Asus Am608 ADSL modem)
View 9 Replies View RelatedI am new ubuntu user . I installed - ubuntu desktop v9.10 32bit. I have BSNL (Indian Telephone service) broadband connection. In Windows 7, BSNL broadband connection is working fine.
Now in ububtu I try to establish ADSL connection using following command: "sudo pppoeconf". It open a console based wizard and I'm able to create the connection. But this connection is sustain hardly 4~3 minute, after that it is disconnected. So, Again i have go through the same process again and again.
I use an ADSL connection which I 'dial' using the Network Manager. My laptop is connected to the modem through an ethernet cable.
The thing is the place where I stay is prone for power failure. So the modem goes out with the power. It comes back on within a minute when the power is restored but Network Manager doesn't seem to automatically re-establish the connection after it is lost once. I have to manually do it. Hence most of my downloads do not get done.
My Laptop can Connect to my wireless modem device, but I don't know How can I connect to internet (ADSL) by My laptop (Bridge)?
View 6 Replies View Relatedi've just installed opensuse 11.2 everything is working fine but i'm unable to connect to the internet through my adsl modem the network is shown to be active but after i configure the dsl connection i can't see any option from where to connect
View 1 Replies View Related