Fedora Networking :: Can't Get Access To Internet Through ADSL?

Mar 7, 2009

I have an valid account,and I used pppoe-setup to set the dial correctly.After the configuration,I typed "ifup ppp0",nothing wrong happens(no news is good news?).Then I typed "pppoe-status",it said I've connected to the internet . I opened firefox,updated my system through yum ,they all said I haven't connected to the network!!!I've formated my harddisk and reinstall my system,but the problem is still.

View 4 Replies


ADVERTISEMENT

Ubuntu Networking :: Connect Only One PC At A Time To Adsl Router/modem For Internet Access?

Apr 1, 2011

I have 2 pcs at home. I dont have a switch so I can connect only one PC at a time to my adsl router/modem for internet access. In the past I had successfully connected the two PCs (NIC to NIC) to each other using the same ethernet cable which was supplied with my dlink adsl modem.

Recently the motherboard of on of my PC went bad so I replaced it with a new one. The problem is when I connect the two using the same Ethernet cable they won't connect. The lights on the Ethernet port won't light up. I can still connect both of them to the adsl router (NIC to Router) (one at a time).

View 5 Replies View Related

Fedora Networking :: Connect To Internet (ADSL) By Laptop (Bridge)?

Nov 24, 2010

My Laptop can Connect to my wireless modem device, but I don't know How can I connect to internet (ADSL) by My laptop (Bridge)?

View 6 Replies View Related

Fedora Networking :: Configure ADSL Using Use Fc10 - Ethernet Cable <Asus Am608 ADSL Modem>

Aug 6, 2009

I want to configure my ADSL but I don't know what should I do. Can you explain me How can I configure it?(I use fc10, ethernet cable <Asus Am608 ADSL modem)

View 9 Replies View Related

Networking :: How To Connect ADSL Internet With LAN

Sep 19, 2009

I have an ADSL line that allows me for maximum of 4 concurrent users with external IP addreses. The IP addresses are not static (they change every 3-4days).

My current setup is as follows:
* A-link Roudrunner 44B Modem connected to the main line
* D-Link DI524 Router (port 1) connected to the modem
* This leaves me with 3 ports and Wireless for my other machines

What I wish to do is:
* Have all my machines with static IP addresses for LAN
* still have internet connection

I've tried enabling DHCP on the D-Dlink Router with LAN IP 192.168.0.1 and IP range from 192.168.0.100 - 192.168.0.199. Then gave my machine static IP 192.168.0.101, subnet 255.255.255.0 and gateway 192.168.0.1....obviously it didn't work. I've tried the above with both the modem being connected to the router via port1 and WAN port... but I have the same results. I also tried to do the same without the router (direct connection between the PC and modem) still got the same results. Could it be that what I am trying to do is not technically not possible due to my ISP setup to ensure no more than4 concurrent users limit is in place.

View 16 Replies View Related

Networking :: Get ADSL Gateway To Work With Cox Internet?

Sep 27, 2010

have a netopia 3347-02 Wireless ADSL Gateway that i got from at&t. i am no longer with at&t.i switch over to cox. I have the cox modem. i also have cable on the modem. when i connect a ethnet cable from cox's modem to my laptop my internet works. but i want to use the netopia 3347-02 Wireless ADSL Gateway that i got from at&t cause of the wifi. when i login & connect to the netopia 3347-02 Wireless ADSL Gaut it in bridge mode.internet works fine, but im not able to use wifi, im also not able to login into the admin page. i have to do a factory reset on it so i can log back in. So how can i make it work with cox modem?

View 4 Replies View Related

Ubuntu Networking :: Connect To Internet Using ADSL Router?

May 23, 2010

I'm a beginner in Ubuntu, I'm using Ubuntu 9.10.
Currently using a Dlink GLB-802c router and using a ADSL connection. I try to connect to the Internet but it is unsuccessful. Ubuntu is not indicating my router when I connect to the PC.

My PC is P4 and using USB to connect to internet, PC haven't a Ethernet interface.

View 1 Replies View Related

Networking :: ADSL & Connects To Internet Via Leased Line

Jan 20, 2011

i have a leased line ( speed 2 MB ) which we use to connect to our mail server , oracle ERP etc.. we have a dhcp scope defined as 192.168.100.1-192.168.101.254. with a default gateway as 192.168.100.90 ( which is a cisco router ) we have a pix firewall ( 192.168.100.10 ).. now the gateway passed all the request to firewall..

we have an ADSL of 4 MB speed.. ip is 83.*.*.230 from ISP. i have a proxy server ( squid ) eth0 is connected to ISP (83.*.*.230).. eth1 to LAN ( 192.168.100.79 ) now the problem is when i put default gateway to eth1 ie 192.168.100.90 the squid connects to internet via leased line.. if i leave the default gateway field empty on eth1 , the squid connects to internet via ADSL ( which i want ) but the problem is no one on the lan cant ping the squid server ( no connectivity to internet for the whole LAN ) how can i solve this problem? i want squid to connect to internet with ADSL, but if i put gateway on eth1 ie LAN squid goes through leased line which i dont want to happen.

View 3 Replies View Related

Ubuntu Networking :: Access Blocked Sites By VPN And Unblocked By Direct ADSL?

Nov 21, 2010

I am in China, where some web sites(....., facebook, etc) are blocked. So I have to access these blocked site by VPN. But how can I access blocked sites by VPN and unblocked sites by my direct ADSL?

View 2 Replies View Related

Ubuntu Networking :: Set Up A Permanent DHCP Lease For My MAC Address - Share Internet ADSL Connection

May 26, 2010

I've set up a permanent DHCP lease for my MAC address. I did this hoping to resolve the fact that I share my Internet ADSL connection with my wife and my daughter (the latter a great bandwidth hog)!

View 5 Replies View Related

Fedora Networking :: Cannot Access Internet Through Gateway

Sep 4, 2009

I have installed fedora 11 64 bit on a new computer. I have no problems accessing the computers on my local network, but can not get past the gateway. The gateway is running windows XP with IP address 192.168.0.1 and is named "internet". When I boot the new computer in windows, there is no problem. Here is the output of some commands I saw in other posts with similar problems:

$ /sbin/ifconfig eth0
eth0 Link encap:Ethernet HWaddr 00:24:8C:7F:10:0C
inet addr:192.168.0.245 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::224:8cff:fe7f:100c/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

[Code]....

View 13 Replies View Related

Fedora Networking :: Can't Access Internet With Web Addresses ?

Jul 7, 2010

I installed Fedora 13 on my laptop today after deleting a badly screwed up Windows XP partition. Everything installed smoothly even my Broadcom drivers but I can't seem to figure out how to get Firefox to access the web with a URL.

I can ping Google, and can get to it in Firefox if I use the IP address from the ping, but going to [url] in Firefox will give me an error message about not being able to find the server at the web address. I was also able to update from the terminal with yum update just fine. I've tried searching Google for some answers, and maybe I just can't phrase my query right, but I found nothing that I could use to try and fix my problem.

I've attached a HardInfo report which I hope could be useful if you need to know what my hardware is (an HP Pavilion zv5000 laptop).

View 9 Replies View Related

Fedora Networking :: No Wired Internet Access

Aug 14, 2010

I've installed Fedora 13 on a Toshiba Satellite A40 laptop, and am trying to get the wired ethernet connection to work. Network Manager says it is connected, and the connection details (DHCP assigned IP, gateway, dns servers) all seem correct. However, I cannot browse the internet. Checking for updates fails also. I have tried pinging various sites and the results are inconsistent - sometimes it works, sometimes it times out with "unknown host". [URL]... I've searched around for similar issues and tried disbaling ipv6 both in Fedora and Firefox, but this doesn't help either.

View 10 Replies View Related

Fedora Networking :: Access To The Internet From Our Console?

Apr 29, 2011

After upgrading to F14 from F10, we seem to have access to the internet from our console, and no one is able to connect to server as well. We have static IP from comcast. And all the configurations on the eth0 looks fine. We are able to browse, if we set the server to dynamic ip. Also, we are able to connect another PC (laptop) with the static ip configuration, and browse fine. Read through many messages on this forum, cant get any clues,

View 3 Replies View Related

Fedora Networking :: Internet Access Restrictions?

May 31, 2011

I have a work network of about 20 boxes most of which are running Windows 7 and one of them is a file server using linux and another is Windows server 2003. Now the local IP is distributed by the router, and no regulation of internet access is done by any of the servers.What I need to do is restrict internet access to select domains, which would probably need DHCP through linux(I think, not really sure), and I need something simple like a 'blabla.conf' file with the allowed websites that I can edit. need to know how to regulate IP addresses through the linux box (all details if possible, I never tried to do that before), and how to restrict internet access also through linux.

View 4 Replies View Related

Fedora Networking :: SELinux Is Blocking Internet Access?

Mar 12, 2009

when I try to connect to internet SELinux give my a preventing NetworkManager here is what its say:

Code:
Summary:
SELinux is preventing NetworkManager (NetworkManager_t) "getattr" to /dev/ppp
(ppp_device_t).

[Code]....

View 2 Replies View Related

Fedora Networking :: Determine Which Programs Access Internet

Mar 16, 2009

I see from the netspeed applet that my computer is downloading stuff almost constantly. Not a whole lot, 8b - 700b per second while apparently doing nothing. Some of this is just responding to broadcasts from the router, but surely not all. I would like to be able to determine which programs are accessing the internet over that wireless card, with a view to cutting down on my bandwidth usage. Is there a program that can tell me which ones are doing what at a given time?

View 5 Replies View Related

Fedora Networking :: Access Wireless Internet - Air Card On 10?

May 8, 2009

I am building a CarPC which I'd like to have wireless internet access on. I have Verizon phone service so if there is a Verizon air card (not wireless card, an air card so I can have constant access without having to search for hot spots) that would work with Fedora 10 I would be very happy. I don't really know where to start and I can't find too much on Google, so I'm just looking for what options are available.

View 3 Replies View Related

Fedora Networking :: Completely Unable To Access The Internet?

Jun 16, 2009

Fedora 11 is completely unable to access the internet for some reason, and after some troubleshooting, I've determined the problem to my Motorola 2210 DSL modem. I know my connection is working fine, as it works perfectly in both Vista and 7. I've tried things such as grep 'Ethernet' /var/log/dmesg, filling in the information into the network settings manually, to no avail.

View 12 Replies View Related

Fedora Networking :: Bridged Successfully But Cannot Access Internet

Aug 7, 2010

Bridged successfully but cannot access the Internet.I installed VMware in my Fc13,and installed XP sp3 in the VMware.I can access the Internet in XP,I set the network as Bridged with Fc13,but Fc cannot open a page,but I ping google.com,it can display: Code: Pinging google.com [64.233.183.104] with 32 bytes of data:
then nothing.I still cannot access the Internet in my Fc13.

View 1 Replies View Related

Fedora Networking :: Can't Access Internet From Mobile Broadband

Oct 4, 2010

I tried to preupgrade to f14 and cancel it after some time. Now, I am facing a problem that I cannot access internet from mobile broadband; but I can access net while i am connected via ethernet or wireless. I have cleared preupgrade files with

Quote: yum clean all; yum remove @preupgrade

$ uname -rs Linux 2.6.34.7-56.fc13.i686.PAE

It can detect my HUawei modem and creating an IP as well. But no Internet. Can you tell me the reason?

View 1 Replies View Related

Networking :: Cannot Access The Internet Through Tata Photon Plus On Fedora 15

Jul 30, 2011

I followed the instructions mentioned in this thread carefully [url] Despite this, I am unable to connect to the internet. It just says connecting and connecting, but it doesn't connect at all.

View 2 Replies View Related

Fedora Networking :: F13 - System Updater Can Access Internet - Firefox Can't

Aug 15, 2010

I am coming from Windows XP Pro, on the same machine (and where I am writing this post from) so the internet clearly works on XP. On F13, the eth0 connection is activated and the drivers for the NIC chip were installed with the OS. The NIC is Intel Pro/100 VE. The problem that occurs is that the system updater (in GNOME) can access the internet, and installed a bunch of updates after installing the OS. I know it can get to the internet because the updates worked and in the System Monitor, I can see both uploading and downloading occurring during the updates. Now the problem is that when I open FF, I can't seem to get to pages, and I get the usual FF error (pic -- [URL]). However, I CAN get to [URL] as well as [URL] , but I cannot access several other subdomains on fedoraproject.org . I also cannot get to any other page online, ([URL] for example).

View 8 Replies View Related

Networking :: Datacard Goes Online But Doesn't Gives Internet Access (Fedora 14)

Dec 25, 2010

I am using MTS datacard. I have usb_modeswitch installed and have configured the wvdial.conf file. When I do sudo wvdial cdma, the IPs and DNS addresses are also allocated but I still cant access internet.

Code:

dmesg | grep -e 'tty' -e 'modem'

is:

Code:

[ 0.000000] console [tty0] enabled
[ 11.098238] USB Serial support registered for GSM modem (1-port)
[ 11.098352] option 6-1:1.0: GSM modem (1-port) converter detected

[code]....

View 1 Replies View Related

Fedora Networking :: Config ADSL Connection In 10?

Jan 22, 2009

I'm using ADSL connection as a way to access internet.All of us know that in windows we can get configed easily.But it is a little more difficult in Fedora.How can we config ADSL connection in Fedora 10?My modem uses dynamic ip.

View 14 Replies View Related

Fedora Networking :: Samba Share With Two Network Cards - No Internet Access

Mar 1, 2009

I have a fedora 10 box with two network card on eth0 I have a pppoe connection to the internet, on second card eth1 I share my internet connection end I set up a samba server but I don't know if the settings are good. How to do this settings right to work fine, the ip are assigned by dhcp I don't use any static ip .When I try to browse the internet from the other computers some site's like {.com ; .org ; .info} are block, other site from {.ro} are working. Someone tell me something about turn off all my filters, but I don't know where to find this filter to turn it off. And when I use samba I can't have and internet access or vice versa. My network look like that:

Code:
eth0
|<--pppoe connection
|
MyComputer
(fedora 10)
|
eth1
|
switch
|
comp.1 comp.2
Win OS MacOS

View 2 Replies View Related

Fedora Networking :: Network To Lan - For File Sharing - Printing And Internet Access

Dec 30, 2009

I have a wired lan at home with 2 XP boxes connecting to a router to a DSL modem. I want to network my laptop, running only fedora os, for file sharing, printing and internet access. I will be using the laptop probably exclusively for creating/maintaining a Drupal-based (LAMP) e-commerce site to replace our old one for our small family business.

View 4 Replies View Related

Fedora Networking :: Start An ADSL Connection Using Comandline?

Mar 23, 2009

I have D-Link GLB502-T ADSL router with MTNL TriBand connection.I am currently using Fedora 10. I have successfully setup the ADSL router in bridge mode, and can connect to net using network-manager.

Now I need to know how to start this connection using command-line. I intend to schedule auto restart of the connection for my night unlimited connection.

View 2 Replies View Related

Fedora Networking :: Multiple ADSL Connections To A Fedora10 Box.

May 18, 2009

I got 2 ADSL accounts from a provider, so I decided to configure a server as a gateway for my other PCs.. I created ppp0 device using pppoe-setup over eth0. Then I configured the second one as ppp1 over eth2 to the second modem.. When I finished, I used ifconfig to check the settings and I got only ppp0 and didn't see ppp1, I tried to ifup ppp1 but I still get one device with ifconfig.. The adsl-start command starts only ppp0.What should I do to get the 2 lines to work simultaneously?Are there any configuration files that need to be edited?

View 2 Replies View Related

Fedora Networking :: Make ADSL Bridge Connection In 10?

Oct 2, 2009

"I am new to Linux. Could you please guide me how to make ADSL bridge connection. I have tried to make connection using Network manager. But, it some times works and some times doesn't works."

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved