I have always been using one ADSL connection (ppp0) with squid.My question is, is it possible to add another ADSL connection to the same box.If yes how does the route works.Is it possible to switch to one ISP to another by just changing the route?
View 1 RepliesI'm using ADSL connection as a way to access internet.All of us know that in windows we can get configed easily.But it is a little more difficult in Fedora.How can we config ADSL connection in Fedora 10?My modem uses dynamic ip.
View 14 Replies View RelatedI have an ADSL connection without a fixed IP address. Is there a clever way of finding it out so that I can log into a local IMAP server from the Internet without phoning up to ask for the IP address?
View 4 Replies View Relatedis there any problems with making adsl connection in ubuntu 10.10. Recently I've had ubuntu 10.04 and there was a problem with making adsl connectio so I was forced to you terminal in order to connect to internet. I'm asking you this because I'm planing to install Ubuntu again but if there is still connection problems then I wouldn't install ubuntu
View 5 Replies View RelatedI have been successfully using my speedtouch usb 330 for years.
Now suddenly something weird occurs.I manage to stay connected a few minutes, afterwards the line drops down and I can't reconnect.
I switched the connection script to "verbose mode" and what I get is:
It seems that I can't get an answer from the provider, but if I reboot it connects at first attempts, but the connection falls down again after a few minutes.
I have dual boot. No similar problems is affecting the connection under Windows, so some hardware fault is ruled out as a possibility.
I have D-Link GLB502-T ADSL router with MTNL TriBand connection.I am currently using Fedora 10. I have successfully setup the ADSL router in bridge mode, and can connect to net using network-manager.
Now I need to know how to start this connection using command-line. I intend to schedule auto restart of the connection for my night unlimited connection.
"I am new to Linux. Could you please guide me how to make ADSL bridge connection. I have tried to make connection using Network manager. But, it some times works and some times doesn't works."
View 1 Replies View Relatedhow to make pppoe (ADSL) connection on fedora 12
View 2 Replies View RelatedI just configured my (dataone) ADSL connection and now it stops intermittently. Can anyone tell me why this happens and what is the solution for this.
View 1 Replies View Relatedhow to make a user, not root, connect to internet? without having to type as root:Quote:# pppoe-startin an ADSLAlso ... to exit the Internet having to type, also as rootuote:# pppoe-stopBuilding on the topic: Is there a graphical interface for ADSL connection ?
View 1 Replies View RelatedI downloaded openSUSE-11.4-KDE-LiveCD-i686.iso from software.opensuse.org: Download openSUSE 11.4 yesterday.It's a liveCD,not a DVD. Then I used a dd command to make a live USB by the instruction from this page:SDB:Live USB Then I shut down the computer,and boot from the usb. I went to the yast--DSL to make a new adsl connection.But after I configured everything,yast told me one package needed.The package's name is "linux-atm-lib". I haven't connected to internet.How could I do to install a package and make a connection?
Now I am downloading a DVD.Does a DVD include the package called "linux-atm-lib"?
I want to configure my ADSL but I don't know what should I do. Can you explain me How can I configure it?(I use fc10, ethernet cable <Asus Am608 ADSL modem)
View 9 Replies View RelatedI am new ubuntu user . I installed - ubuntu desktop v9.10 32bit. I have BSNL (Indian Telephone service) broadband connection. In Windows 7, BSNL broadband connection is working fine.
Now in ububtu I try to establish ADSL connection using following command: "sudo pppoeconf". It open a console based wizard and I'm able to create the connection. But this connection is sustain hardly 4~3 minute, after that it is disconnected. So, Again i have go through the same process again and again.
I use an ADSL connection which I 'dial' using the Network Manager. My laptop is connected to the modem through an ethernet cable.
The thing is the place where I stay is prone for power failure. So the modem goes out with the power. It comes back on within a minute when the power is restored but Network Manager doesn't seem to automatically re-establish the connection after it is lost once. I have to manually do it. Hence most of my downloads do not get done.
I did a fresh install of 10.04 and started customizing and adding my standard applications. When I went into admin.>login screen to see if I could change that crappy boot menu, I noticed that I have the option to boot into KDE. I am guessing this is due to amarok because that's the only KDE application I have. However, I decided to try it out. I booted into KDE and got the KDE noise, AWN showed up at the bottom, but the screen remained black other than that. I clicked on firefox and could use that, however, it had no title bar or decorations. I was wondering if it was possible for me to run both gnome and KDE side by side without issues.
How do I get KDE working on the same partition that I installed Ubuntu?Will they play nice or will I have issues?If it matters, I'm running 64-bit with Radeon HD 3100
I have a pppoe adsl connection. When I disconnect and try to reconnect, network-manager keeps asking for my password. I type it again and again with no success. When I reboot, it works again. On ubuntu, I use pppoeconf and it works well. So on Fedora I made a connection with pppoe-setup but neither ifup nor
Code:
pppoe-connect
commands work. When I type
Code:
pppoe-connect
, it says
Code:
/usr/sbin/adsl-start: line 217: 13409 Terminated $CONNECT
"$@" > /dev/null 2>&1
. When I type
Ifup ppp0 doesn't work either. However, with exactly the same settings, ubuntu connects to the internet.
I've set up a permanent DHCP lease for my MAC address. I did this hoping to resolve the fact that I share my Internet ADSL connection with my wife and my daughter (the latter a great bandwidth hog)!
View 5 Replies View RelatedI have an adsl modem acting as a bridge to my router my setup was working well for more than year now , but then the internet went slow . I set the modem back to PPPoE the problem was with the DNS server of the ISP so using ifup i set the dns t 8.8.8.8 (google) the connection is back , but when i set the modem back as a bridge slow internet does the router know that my dns is 8.8.8.8 or i should set the dns on the router ? I can't see an option to set the dns on the router ( i just enter my username and password from the isp to use PPPoE mode ) by the way i called the isp support they kept telling me to restart , i told them i did but i never restarted my pc . I'm sure if i tell them i'm running linux they will blame the os !
View 2 Replies View RelatedHow to organize in one server the Internet from two providers (ADSL) ?
View 1 Replies View RelatedLinux printing appeared to be working fine up until yesterday. Today typing lpq gives the following: lpq Printer 'sdst@other.domain' - cannot open connection - Connection timed out Make sure LPD server is running on the server
The /etc/cups/printers.conf file is properly set, the printers appear in localhost:631 and they are printing test pages. However, all command line print commands seem to be trying to print to sdst@other.domain I don't know why printers.conf is being ignored and why and how sdst@other.domain was added. Seems like it might have been auto-discovered?
# dit: sdst@other.domain was mentioned in /usr/local/etc/lpd.conf I'm not sure why lpd.conf is being used instead of /etc/cups/printers.conf
I'm a frequent user of the shared connection feature of SSH. Usually i have two or three connections open at the same time through the connection sharing feature, but sometimes when i try to start another i get the message "Shared connection to <server< closed". All the connection that are established through the connection sharing feature are still active and not closed, but when i try to create a new one i get that message.. i've even got that message when i have only had two connections through the shared connection feature.
I've tried to search google but it doesnt seem like anyone else has had the same kind of problem, does someone know why i sometimes get this error ?
I am running an Ubuntu Server on a VirtualBox VM running on my windows machine. So I've created a self-signed certificate using the following tutorial: [URL]
From this tutorial I'm left with 3 files:
server.key
server.csr
server.crt
Then I found this very similar tutorial that has an extra bit on installing the certificates in apache: [URL] So I followed it's instructions which boil down to this:
[Code]...
So I'm thinking this should work now. However in Chrome I get: SSL connection error Unable to make a secure connection to the server. This may be a problem with the server, or it may be requiring a client authentication certificate that you don't have. Error 107 (net::ERR_SSL_PROTOCOL_ERROR): SSL protocol error. IE8 gives me a typical "Internet Explorer cannot display the webpage" Note that [URL] fails while [URL] works fine, so it's definitely something in my ssl setup I'm thinking.
vsftpd not working on my CentOS system. I tried logging in using FileZilla but the error message was: Connection attempt failed with "ECONNREFUSED - Connection refused by server".
View 7 Replies View RelatedI can make a connection to the vpn server, the connection starts, but nothing happens! My IP address remains the same as previous! There is nothing added to my Knetworkmanager, I'm a beginner I should use a pcf file for my vpn connection. I use it properly, I'm sure because the connection starts and an icon is added to my panel and remains until I disconnect.
I checked it via ifconfig -a, the last part (which is for vpn) is:
Code:
tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
inet addr:141.213.169.76 P-t-P:141.213.169.76 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1390 Metric:1
RX packets:4 errors:0 dropped:0 overruns:0 frame:0
I am trying to Setup citrix ICA client 9 on Ubuntu 9.04 Server. I installed it very easily and I am not getting any lib error also. But when I try to connect to the citrix server, it fails with a pop up saying "Error in Network Connection Network or Dialup connection may be preventing ......" This is driving me crazy from 3 days. My project is to check the feasiblity of a Linux desktop
View 1 Replies View Related1) I have an ADSL router for internet and RHL box sitting on the southside of the southside of the router with local IP configured.
I have to access the Linux box through the internet.
I have tried to port forward the SSH port on the ADSL router, that is not working.
At home, I have one pc and one laptop. The first one is working under Windows XP and connected to ADSL. The second one is under dual boot : xp and ubuntu. Some months ago, i've created an ad hoc network so that i can share the ADSL connexion with the laptop. When the laptop is working under XP, it works. But when i'm on ubuntu, the network is detected - i guess it is detected as a ad hoc network, cuz it's represented with two computers - but the ADSL is not shared. What do i need to change?
View 1 Replies View RelatedFirst of all add yourself to the www-data group - usermod -a -G www-data <your login> Then to the right side of the top panel, there should be a network icon in the notification area, right click on that and edit connections.Then goto DSL>add; enter your username and password and check "available to all users" if you're not in a multiuser environment, this is safe.
View 2 Replies View RelatedI just switched from windows to lucid lynx 10.4, but I am really frustrated because I have no idea about how to set up Internet (both adsl and wifi). I have checked the documentation and browsed for hours but the solutions out there never seem to apply to my case, so I beg for some personalized help on how to set up Internet. The only things I know are how to get to the terminal and that I am on an HP laptop. I beg you if you request information you give me a hand at how to find it, given my inexperienced level
View 3 Replies View Relatedi have a Conexant AccessRunner ADSL WAN USB Adapter and i want to switch from windows to ubuntu! i have installed along side windows and i don't know how can i get my ADSL adapter to work under ubuntu?
View 9 Replies View Related