Every now and again my internet drops out for no apparent reason. I try dhcpcd -k eth0/dhcpcd eth0 and nothing. I try modprobe -r <driver> modprobe <driver> dhcpcd blah blah and nothing. /etc/rc.d/rc.inet1/2/d restart. Nothing. The only thing that works is rebooting my system. how to reset my connection without rebooting?
View 7 RepliesI am using centOS 5.My internet connection drops at irregular intervals and it restores only after reboot the system.Even if i deactivate and re-activate it using Newtwork cofiguration utility,It shows its active but it cannot open any page.
View 1 Replies View RelatedMy internet connection drops randomly in ubuntu but works fine in XP.The connection is not disconnected but i cant browse any sites,so what i do is i will reboot my system so that i can surf again but after few minutes the same problem is happening again
View 9 Replies View Relatedi installed Opensuse 11.2 recently but the wireless internet wasn't working been searching for few days now and i can't find the solution. it shows my modem, and i can connect to it but for some reason it appears to drop the connection it keeps asking me for my encreption key so btw is one of the first times i worked with linux / opensuse.
View 4 Replies View RelatedI could not find an answer to this. I can connect to the internet no problem after I edit the connection name to NETGEAR instead of our last name. After a while it looks like it renews the connection and created a new one with the wrong name. The connection drops. It looks to me it is not using the same wireless connection each time but creating new ones that do not work for the above mentioned reason. What can I do to stop the loop and have it use the same connection always?
View 5 Replies View RelatedI installed slackware 13 in virtualbox (full installation), but I have not internet (ADSL). I tryed adsl-setup, but there aren't that commant. Tryed pppoe-setup, netconfig, but again I have not connection. Where is the problem? And I have one more question about Fluxbox. I have not display, wallpaper, icons...only menus.
View 3 Replies View RelatedDoes anyone know how to install Firefox Add-Ons without an Internet connection? I need to install Firebug on a Slackware 13 machine that's not connected to Internet
The version of Firefox is 3.5.2.
how to make a user, not root, connect to internet? without having to type as root:Quote:# pppoe-startin an ADSLAlso ... to exit the Internet having to type, also as rootuote:# pppoe-stopBuilding on the topic: Is there a graphical interface for ADSL connection ?
View 1 Replies View Relatedi have 2 laptops dell d410 whit slackware 13.7 on them .i had some problems with one (one pad) and i have changed some components from one laptop to another : some ram ,wireless, internal modem .now i don't have internet connection from slackware . if i boot slax it's all ok.
View 2 Replies View RelatedIs it possible to upgrade a Slackware installation from a freshly d-loaded DVD? How would one go about this? Would the procedures in the Upgrade.txt work? I would assume they would need to be modified a bit, though, since I'm only upgrading the same version of Slackware. I'm not going from say 13.1 to 13.37. I just want to update a 13.37 current that I installed about three weeks ago to the now final release 13.37. If I could get my silly Trendnet TEW 423IP wireless PCI card to work in Slack, I could upgrade the normal way with Slackpkg.
View 6 Replies View RelatedI have ubuntu 9.10 server installed, I am connecting with putty over ssh 22. but after a while (about 20-30 mins) the connection drops. and I have to connect again. is there any configuration for that?
View 2 Replies View RelatedRecently, Putty keeps intermittently freezing and locking me out of the system (i.e. I can't stop the session and I can't re-login via ssh again until I've gone to the machine and pressed "reset").
So far, it mostly occurs when opening a file in VIM, but it does sometimes occur when using tab to auto-fill a file or directory name at the command prompt.
I got a new low power file server (Atom 330 with ion), but didn't enjoy it since.
I installed Ubuntu server 9.10 64bit.
I randomly experience connection drops. As I'm installing and testing, there are lots of ssh windows open, I transfer much data using scp from my laptop to the server (all connected to wired lan).
Connection drops are as follows: ssh windows terminate with "connection reset by peer", but not always all the ssh windows terminate. For example, I edited a mediatomb config using nano, that stayed open even with scp and all other ssh windows cut.
I also have apache2 installed because I'm running urd (a usenet download tool). It seems that when I start the deamon, connection drops. So I killed apache2 to try out but that didn't solve the problem.
I left ping run all the time, and the server is pinging back all the time, which is really strange as I thought that a connection drop means the whole network interface going down.
When this drop occurs, I have to wait 2 minutes until I can ssh back into the server.
I also installed mediatomb, but it isn't really fun to stream a video to my ps3 as it always hangs after 5 to 10 minutes.
Code:
lspci:
Code:
I've had a computer running Ubuntu connected to my TV for a few weeks now, but as of yesterday, I can't get it to keep a connection to the Internet. Everything works well for an hour or so after a reboot, but then no WAN connections work. When this happens, no sites load in Firefox or Chrome, I can't ping Google, I can't SSH to the box from work, and none of the pages I have running on apache load from remote computers. However, all local area connections seem to work fine. SSH from within my LAN takes much longer than usual, but it does still connect.
View 2 Replies View RelatedSomething really fuŃked-up is going on with my machine... whenever I try to update my repositories (regardless of if it's by Synaptic, Ubuntu Software Center or terminal via sudo apt-get update), my PC loses connection, and I need to reset my WLAN twice to make it work.It's in a specific part where it happens...
Code:
Ign http://archive.ubuntu.com natty InRelease
Ign http://extras.ubuntu.com natty InRelease
[code]....
Hello, I've installed OpenSwan with xl2tpd on my server, and set it up for roadwarriors connecting using certificates.
My server is Debian 5.0.8, I am running xl2tpd 1.2.0, and Openswan IPsec 2.4.12, my clients are all Windows, and I am testing my setup on a Windows 7 client.
I have no problem connecting to the server, but after some time the connection drops. I removed the idle option from the ppp config but it does not make any difference.
Even when I create constant traffic with ping -t the connection drops also.
I have no problems reconnecting right away.
I have been hacking at this for a couple of days, reading every post I can find, but I have not found a solution to my problem.
Here are my configs and logs:
CONFIG FILES:
/etc/ppp/option.l2tpd
-----------------------------
ms-dns 10.248.75.4
ms-wins 10.248.75.4
asyncmap 0
auth
crtscts
[Code]....
I'm a Linux newbie. Used to use Ubuntu, but I switched to Slackware because I want to learn how Linux works better.
On my Samsung qx410 laptop, I can't connect to the internet. I went to the System Settings -> Network Settings and all the tabs there, but it wouldn't detect any connection, wireless nor wired.
I noticed that the kernel of Slackware 13.1 is out of date, so I tried compiling a newer one, but I couldn't get that to work.
I tried downloading this file: iwlwifi-6050-ucode-41.28.5.1.tgz but even after reading the readme, I had no clue how to go about installing it or even whether it was the right thing to install in the first place.
How can I get my internet working?
I'm having problems with my mobile connection. This has been working fine for months, but in the past few days it has connected OK, I've been able to transfer data, but after 30s the connection closes. Setup is Acer AA1 with F12 connecting via bluetooth to Nokia 3110c on O2.
So to try and figure out what's happening I put the bluetooth dongle in my desktop PC, also running F12, made a connection and again it dropped out after 30s. Then I fired up windows on the AA1 and made a connection using the same dongle, this time it held up OK. This leads me to think that something has changed recently in F12 to upset it.
In order to get my shares working I first have to connect to the windows shares from the Ubuntu machine. Then I can connect to the Samba shares from the windows machine. If I don't continue to use the shares. It'll drop the connection and I have to unmount the windows shares and start the process over. The wireless network still shows as being connected but I get an error on the windows machine if I try to connect. I've Googled this and it appears to be a Windows problem. I know this is a ubuntu forum but thought I'd ask for any info. I believe that this is also what is giving me shared printer issues as well.
View 2 Replies View RelatedI'm having a really strange problem with my wifi connection on my laptop. The ethernet connection works fine and so does the wifi connection - as long as I sit within one meters range from my router! As soon as I take the laptop further away the connection drops. The router is still being found by network-manager and the signal is just below 100%, but when I try to establish a connection it fails.
I'm sitting here on a fresh Ubuntu 10.04 install, and I had exactly the same problem with 9.10. That time I went through a lot of different procedures, and in some strange way the problem was solved. I haven't been that lucky this time though, I've tried reinstalling network-manager, using ndiswrapper, installing the wireless backports package, tried all kinds of drivers.. nothing works.
There shouldn't be any problem with the connection itself; I've had a perfect connection downstairs but now I can't even connect if I stand two metres from the router! Has anyone experienced anything like this and managed to fix it? My wireless card is Atheros AR2413. This is an example from daemon.log
Quote:
Apr 30 00:45:51 petter-laptop NetworkManager: <info> Activation (wlan0) starting connection 'Auto Wester'
Apr 30 00:45:51 petter-laptop NetworkManager: <info> (wlan0): device state change: 3 -> 4 (reason 0)
[Code]...
I have an Acer Aspire One ZG5. 160GB HD, 1GB RAM model. I've done a fresh install and an upgrade of 10.04 and have the same problem both ways. I am able to connect to my wireless connection but it is dropped after about 5 minutes and have to wait about the same time to reconnect. I've had to roll back to 9.10 being that I use the netbook for work and school on a daily basis.
View 1 Replies View RelatedI have had this issue for a while on my centos 5.4 dedicated server with 1and1. If I reboot my system, my connection starts and then drops in about 10 seconds after the system has booted.I connected through the serial console and noticed there was only one thing that seemed suspicious while booting. named could not start for some reason. So my question is - are these 2 problems related? If not, what could be the reason for my connection to drop?At the moment the only way of getting the connection back up is by running dhclient. This works until the next reboot.
View 1 Replies View RelatedI could not find a solution to this problem anywhere. I use a ubuntu server to play (stream) mp3s and movies to other computers on my network. It works most of the time, but sometimes in the middle of a movie or a song it will drop/hiccup--saying it is "not reachable". I am not overtasking the server at all, and merely playing an mp3 that takes up less than 10% of the bandwidth, yet it drops it for a split second.
I have a WRT160N router (DD-WRT of course) with 4 clients connected (2 of which are wired). The ubuntu server is connected via ethernet and all machines have the same issue. It can't be the router because another Windows machine works just fine for streaming these files. I just can't understand how it can lose connection for a second or so. It may just be the file-system or some service that is hiccuping, but I have no idea...
I'm having a web server running with ssl version 0.9.8 on Ubuntu 8.0.4. Server is having a valid certificate issued by authorized CA. In the begining client and server able to communicate (beyond handshake) successfully. However, after a couple of days all of the active connections go haywire.
View 3 Replies View Relatedi have dell latitude d830. has anyone else had this problem? it drops and reconnects every 10 minutes or so.
View 1 Replies View RelatedI have a server running Ubuntu 10.04. I use it for mysql as well as samba file sharing across 10 computers. It had been working out great. I only ever needed to restart after I would install updates and to sort of thing. Starting this week however, it has started kicking all the computers off of both mysql and the samba shares every few minutes. It is very strange. The mysql connection can be restored just by closing the database and reopening it. The file shares are only a problem if you try to access them though a program other than your file browser (e.g. save a file you are working on in word to the server). The server never shuts down and all services can be reconnected immediately. It is very strange. I do believe that the server installed some automatic updates at the beginning of this week when this all started happening. I am not sure if one of the updates is causing the server to do this or not.
View 1 Replies View RelatedHaving struggled to get the wireless connection at least working I find it drops out after 15 minutes or so. When I check for wireless connections I can see none at all and the "Disable/Enable wireless conncection" has disappeared, the Network one is still there. I get an auto reconnection if I reboot and all is well for another 15 minutes. Is there any way i can recover the situation without a reboot? I am trying to install the hplip-3.11.5 driver for my new wireless printer,the program take a while to install and by the time it has started looking for the printer the connection has dropped out. I can't be sure but I don't think it was dropping out before I connected the printer using my wired pc. All good fun but I'd like to get it sorted so I can get the engine back in my motorbike, the sort of technology I prefer!
View 3 Replies View RelatedI'm using Scientific Linux on a laptop, connecting to a debian server on my LAN via a basic BT HomeHub router. When starting a file transfer with ftp or rsync from the laptop my connection is dropped, every time, after a couple of seconds. I have to reset my network adaptor and restart my network manager (wicd in this case) in order to get network connectivity back. I had a very similar problem before - [URL]. On this occasion my workaround was to replace NetworkManager with yast. I am now using SL though so no yast available, and I am not using NetworkManager any more anyway.
View 3 Replies View RelatedThis is a little problem I've been having. My internet connection right now is just my rooted android phone broadcasting a wifi signal. It works like a regular wifi connection. When I connect to it, it works fine. But if it goes for more than a minute without having any data transferred, it drops the connection til I reconnect. I can have it downloading all night and it wont go out once. But soon as I let it alone without any data xfer, its down.
My quick fix is to just keep it pinging [URL] and that mostly keeps the connection going (although it still drops occasionally). Anyone know a more permanent solution?
running Slackware64 13.37 with multilib, and wicd 1.7.0
I have had this issue for a while on my centos 5.4 dedicated server with 1and1. If I reboot my system, my connection starts and then drops in about 10 seconds after the system has booted. I connected through the serial console and noticed there was only one thing that seemed suspicious while booting. named could not start for some reason.
So my question is - are these 2 problems related? If not, what could be the reason for my connection to drop? At the moment the only way of getting the connection back up is by running dhclient. This works until the next reboot.