I installed slackware 13 in virtualbox (full installation), but I have not internet (ADSL). I tryed adsl-setup, but there aren't that commant. Tryed pppoe-setup, netconfig, but again I have not connection. Where is the problem? And I have one more question about Fluxbox. I have not display, wallpaper, icons...only menus.
View 3 Replies
Every now and again my internet drops out for no apparent reason. I try dhcpcd -k eth0/dhcpcd eth0 and nothing. I try modprobe -r <driver> modprobe <driver> dhcpcd blah blah and nothing. /etc/rc.d/rc.inet1/2/d restart. Nothing. The only thing that works is rebooting my system. how to reset my connection without rebooting?
View 7 Replies View RelatedDoes anyone know how to install Firefox Add-Ons without an Internet connection? I need to install Firebug on a Slackware 13 machine that's not connected to Internet
The version of Firefox is 3.5.2.
how to make a user, not root, connect to internet? without having to type as root:Quote:# pppoe-startin an ADSLAlso ... to exit the Internet having to type, also as rootuote:# pppoe-stopBuilding on the topic: Is there a graphical interface for ADSL connection ?
View 1 Replies View Relatedi have 2 laptops dell d410 whit slackware 13.7 on them .i had some problems with one (one pad) and i have changed some components from one laptop to another : some ram ,wireless, internal modem .now i don't have internet connection from slackware . if i boot slax it's all ok.
View 2 Replies View RelatedIs it possible to upgrade a Slackware installation from a freshly d-loaded DVD? How would one go about this? Would the procedures in the Upgrade.txt work? I would assume they would need to be modified a bit, though, since I'm only upgrading the same version of Slackware. I'm not going from say 13.1 to 13.37. I just want to update a 13.37 current that I installed about three weeks ago to the now final release 13.37. If I could get my silly Trendnet TEW 423IP wireless PCI card to work in Slack, I could upgrade the normal way with Slackpkg.
View 6 Replies View RelatedI'm a Linux newbie. Used to use Ubuntu, but I switched to Slackware because I want to learn how Linux works better.
On my Samsung qx410 laptop, I can't connect to the internet. I went to the System Settings -> Network Settings and all the tabs there, but it wouldn't detect any connection, wireless nor wired.
I noticed that the kernel of Slackware 13.1 is out of date, so I tried compiling a newer one, but I couldn't get that to work.
I tried downloading this file: iwlwifi-6050-ucode-41.28.5.1.tgz but even after reading the readme, I had no clue how to go about installing it or even whether it was the right thing to install in the first place.
How can I get my internet working?
I am running Ubuntu 10.10, and I would like to use my computer to share the internet connection from an ethernet port. For example, I would like to set up my computer as a wireless access point so I can create a network that other computers can connect to for internet.
View 3 Replies View Related1 linksys router: gets the net from PPPOE and give the network DHCP. The router IP is 192.168.1.1. 1 windows laptop that work wireless and wired. 1 debian desktop that work wired and not working wireless. THe problem with the debian desktop is like this: I have a TP-Link TL-WN321G installed and found by lsusb command. I make a wireless connection WPA Personal (just like the router settings) it says i am connected to the wl network but no internet connection. the route command give me this:
[code]....
I tryed with wicd who said that the connection is WEP (and it's not, it is setup to WPA on the router and the network-manager conncetion) and when i try to connect i get bad password. I tryed with network-manager uninstalled and no chance.
Its a case of ".... wireless network connection active but still not internet connection .."I am using WEP - 128 key ... Works when I connect directly using ethernet cable ... but not wireless (pci and wireless router)
ubuadmin@ubucomputer:~$ ifconfig
wlan0 Link encap:Ethernet HWaddr 00:06:25:12:83:3b
inet addr:192.168.1.10 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::206:25ff:fe12:833b/64 Scope:Link[code].....
I would like to have all traffic from the ethernet connection out through the wireless (basically using the box as a router) however I am having some trouble doing this.
I have done this before on Windows however I am having some trouble doing this on linux, I have tried using Squid Proxy however I am having some trouble using configuring/using it.
I am using Yellow Dog Linux however I am willing to change to any other distro as long as it is compatable with PS3 (as this is what im using linux on)
I have installed Fedora 11 recently. I want to share my Internet connection.
I have e LAN connection eth0 which is connected to internet.
I have a Wireless connection wlan0.
I want to share my internet connection with wireless connection.
It is most certainly my fault but I am now without a sound volume control and it does not show up in the add to panel.What can I do here? Does your icon have code that that I can use or can I find the file somewhere and create a link? Alsa mixer works ok and nothing is muted and I have sound so as to play music. The Internet connection and the power connection icons also don't appear.
View 5 Replies View RelatedI have two linux laptops. Currently, I'm using both of them at work, side-by-side. Now the problem is, I'm connected to a wireless router, but the wireless only works on one of the laptops. So I'm stuck with one laptop that has no access to the internet. Both machines do, however, have working ethernet nic cards. So, I was wondering if I could use the laptop with the wireless connection to share the internet connection with my other linux machine and access the internet on both of them. Or as an alternative, just use the internet on the machine without wireless and be able to switch back and forth, that would increase my productivity like 30 fold.
View 5 Replies View RelatedOpenSuse 11.4 Asus Netbook 1000H Following other members in the forums I have installed Opensuse 11.4 on the Netbook. In the early days Ubuntu Netbook Remix worked well for me. But this has been discarded, and the "one size fits all" Ubuntu had become slow and cumbersome. So..... onto my post. Opensuse is working well. The install went beautifully.
It detected the Wireless Internet and I am able to get on line. I also need to share the Internet connection to a desktop. This is done via a small network switch. Thus far I cannot do this. I tried to use ifup to configure a static ip but this busted my Wireless configuration. I went back to knetwork manager. Then I tried to set up the wired network using knetwork manager and under IPV4 "share" the connection. But this blanks out any possiblity of a static address and substitutes dhcp. My desktop cannot ping the this dhcp address. Ubuntu had this thing called Firestarter? - from memory. This configured the system to sharing the network.
After upgrading to Ubuntu 10.04, I'm not able to make any connection to the internet with either my netbook through WiFi or my computer on wired LAN. I can, however, ping my Solaris machines and Macbook. How do I fix this?
View 9 Replies View RelatedI tried to install Xubuntu 10.10 Maverick as dual boot on my laptop. However when xubuntu is on, I can't find a way to connect to internet. When I try the 2 arrows on the up-right corner the option for wireless is deemed. I tried offline/online, that did not work either. when I click the firefox It says you are not connected.
View 1 Replies View RelatedI seem to have is trying to get the internet to work. I can go to ..... ect but when I try to run playonlinux it says you do not seem to be connected to the internet, please post if you have anything useful, as I said I am very new to linux so be as detailed as possible.
View 4 Replies View RelatedI have the "Work Offline" problem: when I boot up, the icon on the toolbar tells me I have "No network connection". This is not quite true, since I can access the first page of any website - only subsequent pages are inaccessible. I get a message saying that Firefox is offline. However, when I uncheck "Work Offline" in the File menu, it makes no difference to this behavior.
The problem is on my Ubuntu Dell desktop, which is connected to the internet with cable broadband via a D-Link router (wired connection). It has worked fine up till now. I use Ubuntu 10.04 and Firefox 3.6.11. I am writing this on my Ubuntu Dell laptop which is wired to the same router, so I assume the problem is not the router. I have tried various strategies suggested in threads on these forums, including editing about:config, changing "allow" to "deny" in some lines of /etc/dbus-1/system.d/NetworkManager.conf and changing from Automatic (DHCP) to Automatic (DHCP) Addresses only, but no luck so far. The contents of ifconfig are:
eth0
Link encap:Ethernet HWaddr 001:aa0:91:a7:51
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets: 0 errors: 0 dropped: 0 overruns: 0 carrier: 0
collisons: 0 txqueulen: 1000
RX bytes: 0 (0.0 B) TX bytes: 0 (0.0 B)
[Code]...
If I comment out "auto eth0" as well, it makes no difference. If I uncomment both lines ("auto eth0" and "iface eth0 inet dhcp") then I lose the internet connection altogether.
does Slackware 13 64 come with internet proxy server? Or I need to download Squid separately?
View 2 Replies View RelatedI need to setup an Ubuntu Server to handle backups over the network (probably rsync over ssh). That server will then transfer the backup data offsite over a secondary external data line.How can I configure the ethernet interfaces to handle such a scenario?
View 1 Replies View RelatedI'm having some trouble getting my new copy of slackware connected to the internet. I'm new to slackware, so I'm not sure where to begin troubleshooting. So far, I've run netconfig and tried to set up a DHCP and a Static-IP connection, both to no avail. I know my internet connection is working since I'm currently using the same box with a hard-drive that has crunchbang on it. I've read chapter 5 of the slackbook up to the section on PPP and have thus far gotten lost in my /etc/rc.d folder looking at lottsa neat files.
Using ifconfig -a gives me information about an eth0, an eth1, and a lo connection thing. From what I understand from the book, this means that slackware has registered my network card but does not have the right configuration necessary to connect.
I tried getting information about my connection from crunchbang, which was as simple as right-clicking a certain icon and copying down my interface, hardware address, driver, speed, security, ip address, broadcast address, subnet mask, default route, and primairy DNS. Since setting up DHCP didn't work after startup, I assumed I was using static I.P. I put in my IP address, mask, default route, and DNS, but it has not yet connected.
I can't connect to Internet on Slackware. I've blacklisted the modules rt2800usb, rt2x00usb and rt2x00lib in /etc/modprobe.d/blacklist.conf.
View 6 Replies View RelatedI got a dsl broadband connection....I have dual booting on my lappy(Windows7 and ubuntu 9.10)....my problem is i cannot set up the internet connection in ubuntu while i am using the connection in windows7....I am a total newbie in linux
View 3 Replies View RelatedI have loaded Ubuntu studio onto an older computer. Seems to work fine but I cannot get an internet connection.
View 9 Replies View RelatedI turned on my computer today and was unable to access the wireless, I tried to use etho but no luck either. I'm currently running 10.04 and haven't installed any updates or done anything out of the ordinary. I tried removing the internet connection from the network manager and then re adding it, but nothing working :/
View 1 Replies View RelatedI have been having problems with the Internet the last couple weeks. I lose my connection to the Internet and then I'll get it back. I haven't changed any config files, so don't know why this is happening.
I have XP installed on another partition and when I lose the connection with Debian I switch over to check and the connection there is good.
I have included some info below:
etc/network/interfaces
The loopback network interfaceE]
auto lo
iface lo inet loopback
[Code].....
installed ubuntu 9.10.I am from India I use ADSLrouter to get connection in XP windows through WAN main port PPPoE.But after installing Ubuntu 9.10 I could not find my internet connected toMozill Firefox in Ubuntu 9.10.SO please tell me a way how to establish internet connection in Ubuntu 9.10 in a detaled way
View 2 Replies View RelatedSo I recently installed Red Hat 5.5, I'm able to access the internal network, including viewing pages on the intranet (however they load very slow, perhaps an unrelated issue). I can see that RedHat is properly resolving IP addresses, it just times out when it tries to connect to them.
route:
Destination Gateway Genmask Flags Met Ref Use Iface
15.28.184.0 * 255.255.248.0 U 0 0 0 eth0
169.254.0.0 * 255.255.0.0 U 0 0 0 eth0
default (hostname of 15.28.184.0) 0.0.0.0 UG 0 0 0 eth0
I am working on a cross-platform application for Linux ,Apple and Windows, so I have a full tower system with four SATA hard drives that be selected with a switch, so that I can change drives and operating systems at will. -sort of makes me a jack of linux systems, but master of none.It's important to mention this, because it shows the strangeness of the problem as it is isolated to Debian* systems.
So where does debian/ubuntu get it's information to establish a network connection?How do I rectify the problem? I can hardly blame the hardware (RTL8111B), because the problem is isolated to Debian systems.
