OpenSUSE Network :: Make A Adsl Connection,but One Package Required?
Mar 25, 2011
I downloaded openSUSE-11.4-KDE-LiveCD-i686.iso from software.opensuse.org: Download openSUSE 11.4 yesterday.It's a liveCD,not a DVD. Then I used a dd command to make a live USB by the instruction from this page:SDB:Live USB Then I shut down the computer,and boot from the usb. I went to the yast--DSL to make a new adsl connection.But after I configured everything,yast told me one package needed.The package's name is "linux-atm-lib". I haven't connected to internet.How could I do to install a package and make a connection?
Now I am downloading a DVD.Does a DVD include the package called "linux-atm-lib"?
View 2 Replies
ADVERTISEMENT
Jun 19, 2011
I have an adsl modem acting as a bridge to my router my setup was working well for more than year now , but then the internet went slow . I set the modem back to PPPoE the problem was with the DNS server of the ISP so using ifup i set the dns t 8.8.8.8 (google) the connection is back , but when i set the modem back as a bridge slow internet does the router know that my dns is 8.8.8.8 or i should set the dns on the router ? I can't see an option to set the dns on the router ( i just enter my username and password from the isp to use PPPoE mode ) by the way i called the isp support they kept telling me to restart , i told them i did but i never restarted my pc . I'm sure if i tell them i'm running linux they will blame the os !
View 2 Replies
View Related
Oct 2, 2009
"I am new to Linux. Could you please guide me how to make ADSL bridge connection. I have tried to make connection using Network manager. But, it some times works and some times doesn't works."
View 1 Replies
View Related
Apr 11, 2010
how to make pppoe (ADSL) connection on fedora 12
View 2 Replies
View Related
Feb 2, 2010
I can make a connection to the vpn server, the connection starts, but nothing happens! My IP address remains the same as previous! There is nothing added to my Knetworkmanager, I'm a beginner I should use a pcf file for my vpn connection. I use it properly, I'm sure because the connection starts and an icon is added to my panel and remains until I disconnect.
I checked it via ifconfig -a, the last part (which is for vpn) is:
Code:
tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
inet addr:141.213.169.76 P-t-P:141.213.169.76 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1390 Metric:1
RX packets:4 errors:0 dropped:0 overruns:0 frame:0
View 2 Replies
View Related
Nov 22, 2009
I have a pppoe adsl connection. When I disconnect and try to reconnect, network-manager keeps asking for my password. I type it again and again with no success. When I reboot, it works again. On ubuntu, I use pppoeconf and it works well. So on Fedora I made a connection with pppoe-setup but neither ifup nor
Code:
pppoe-connect
commands work. When I type
Code:
pppoe-connect
, it says
Code:
/usr/sbin/adsl-start: line 217: 13409 Terminated $CONNECT
"$@" > /dev/null 2>&1
. When I type
Ifup ppp0 doesn't work either. However, with exactly the same settings, ubuntu connects to the internet.
View 2 Replies
View Related
Apr 6, 2011
I am using OpenSuse 11.4 and trying to set up pptp. I think I am almost there but cant seem to make a connection. Here is the log: -
[Code]....
View 1 Replies
View Related
Sep 26, 2010
Having just installed OpenSuse 11.3, NetworkManager identifies my wireless network, but repeatedly fails to make a connection. Without further ado, here are the outputs to commands requested in the first sticky thread:
[Code]....
View 7 Replies
View Related
Apr 23, 2011
I think I've read every post here about the Broadcom and connection.I thought I tried everything.Turns out (read Chapter�35.�Using NetworkManager) using Connection Manager (K Network Manager) you can not use, what I wanted to use, 'all users, use connection' or said another way, the wifi would be activated and connected Before the user 'logs in'. Well, as I said, it turns out that if you are using gnome, this will work with NetMgr, but NOT in KDE. If you want to use 'system connect' then you have to use 'traditional' if in YaST2. Oh well, at least 'i'm' connected.... (i'm the only user, so not a big deal right now, but would like to get it working...)
View 2 Replies
View Related
Aug 31, 2010
what is the command for surfing Internet via ADSL?
View 9 Replies
View Related
Apr 27, 2011
how to connect to internet via ADSL,and wireless. i am writing all these frome windows
View 2 Replies
View Related
Jun 11, 2010
i've just installed opensuse 11.2 everything is working fine but i'm unable to connect to the internet through my adsl modem the network is shown to be active but after i configure the dsl connection i can't see any option from where to connect
View 1 Replies
View Related
Feb 5, 2011
My router/adsl modem is not connected to a power supply so when power goes and comes the network will do a re-boot. Now the problem is my OpenSUSE network won't come back on! I set the static ip as Autoeth0 to eth0 however when network updates I losse eth0. Why is this happening? Why doesn't the PC simply re-connect? Can I do it via command line?
View 5 Replies
View Related
Apr 23, 2011
I own an ASUS N61JV-X2 notebook PC. It has an Atheros Communication, Inc. AR9285 Wireless Network Adapter. 03:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) 03:00.0 0280: 168c:002b (rev 01) I cannot see any SSIDs including my home Verizon FiOS 802.11 G WPA2-AES-TKIP encrypted network. I went to Starbucks to try to connect to their free Wi-Fi and I could not make a connection. How do I solve this problem so that I can connect to a SSID of my choice and make a wireless connection while using GNOME 3?
View 2 Replies
View Related
Jan 19, 2010
I set up the 'Proxy' from Yast and they tested successfully. I can connect to internet, but why am I getting 'ERROR 407 proxy authentication required'?
FYI, my comp is the part of company .NET network with bunch of firewall and security...
View 4 Replies
View Related
Jan 26, 2010
I have always been using one ADSL connection (ppp0) with squid.My question is, is it possible to add another ADSL connection to the same box.If yes how does the route works.Is it possible to switch to one ISP to another by just changing the route?
View 1 Replies
View Related
Mar 22, 2011
I have gone through a good number of distros all the way back to Slackware but I'm struggling to get my brain moving in the right direction again. I am working to enable sendmail and, from what I've read, it appears that newer version of sendmail are installed with milter but I can't seem to locate this. I am running v11.4 so I'm wondering if this is just not the case? I don't have a problem reconfiguring/recompiling the sendmail conf files but would rather not if it's not required. For the record my ultimate goal is to have the spamassassin and clamav milter's installed and using the home server as our primary email.
View 7 Replies
View Related
May 3, 2010
I'm trying to make a local package server for my offline development network. Can anyone recommend a mirror containing every single package for CentOS 5.4 x86 as well as 64 bit? I've looked around but I haven't had too much luck yet.
View 1 Replies
View Related
Jan 22, 2009
I'm using ADSL connection as a way to access internet.All of us know that in windows we can get configed easily.But it is a little more difficult in Fedora.How can we config ADSL connection in Fedora 10?My modem uses dynamic ip.
View 14 Replies
View Related
Apr 28, 2009
I have an ADSL connection without a fixed IP address. Is there a clever way of finding it out so that I can log into a local IMAP server from the Internet without phoning up to ask for the IP address?
View 4 Replies
View Related
Oct 24, 2010
is there any problems with making adsl connection in ubuntu 10.10. Recently I've had ubuntu 10.04 and there was a problem with making adsl connectio so I was forced to you terminal in order to connect to internet. I'm asking you this because I'm planing to install Ubuntu again but if there is still connection problems then I wouldn't install ubuntu
View 5 Replies
View Related
Jul 4, 2010
I have been successfully using my speedtouch usb 330 for years.
Now suddenly something weird occurs.I manage to stay connected a few minutes, afterwards the line drops down and I can't reconnect.
I switched the connection script to "verbose mode" and what I get is:
It seems that I can't get an answer from the provider, but if I reboot it connects at first attempts, but the connection falls down again after a few minutes.
I have dual boot. No similar problems is affecting the connection under Windows, so some hardware fault is ruled out as a possibility.
View 5 Replies
View Related
Mar 23, 2009
I have D-Link GLB502-T ADSL router with MTNL TriBand connection.I am currently using Fedora 10. I have successfully setup the ADSL router in bridge mode, and can connect to net using network-manager.
Now I need to know how to start this connection using command-line. I intend to schedule auto restart of the connection for my night unlimited connection.
View 2 Replies
View Related
May 5, 2010
I just configured my (dataone) ADSL connection and now it stops intermittently. Can anyone tell me why this happens and what is the solution for this.
View 1 Replies
View Related
May 12, 2011
how to make a user, not root, connect to internet? without having to type as root:Quote:# pppoe-startin an ADSLAlso ... to exit the Internet having to type, also as rootuote:# pppoe-stopBuilding on the topic: Is there a graphical interface for ADSL connection ?
View 1 Replies
View Related
Apr 17, 2010
I can't make dsl connection using network manager,
View 9 Replies
View Related
May 5, 2010
Is network manager fixed in ubuntu 10.04, can I make dsl connection using network manager?
View 4 Replies
View Related
Aug 6, 2009
I want to configure my ADSL but I don't know what should I do. Can you explain me How can I configure it?(I use fc10, ethernet cable <Asus Am608 ADSL modem)
View 9 Replies
View Related
Feb 21, 2011
im on node1 when i type the command ssh node2@ip the terminal hangs up a bit then an error message stating that connection timeout but here is a thing: i cant ping to node2
but i can terminate the ping manually using ctrl+c when i terminate the ping usual message appears stating 10 packets transmitted, 100% loss
ps: when i go to node3 and ssh to node2 it works fine and also i can ping from node3 to node2 very fine. and the firewalls are down at all nodes -all wired connection over a switch
View 6 Replies
View Related
Apr 19, 2010
I am new ubuntu user . I installed - ubuntu desktop v9.10 32bit. I have BSNL (Indian Telephone service) broadband connection. In Windows 7, BSNL broadband connection is working fine.
Now in ububtu I try to establish ADSL connection using following command: "sudo pppoeconf". It open a console based wizard and I'm able to create the connection. But this connection is sustain hardly 4~3 minute, after that it is disconnected. So, Again i have go through the same process again and again.
View 5 Replies
View Related
