Server :: Standered Size Of /, /usr, /home, /tmp, /var In Company?
Jun 7, 2010in defining the size of /, /home, /usr, /var, /tmp directory.
View 1 Repliesin defining the size of /, /home, /usr, /var, /tmp directory.
View 1 RepliesI plan to host a Server. I want to know which is the best for Visualization.
Cent OS = > Xen
VMware = > open source.
i need to host a intranet in my company. they r going use java web based.which way is the best solution improve the I/0 request speed.
I know Ubuntu is opensource and free to use and develope, but can one start a company and install Ubuntu Server on a server and sell it, as one complete package?
View 2 Replies View RelatedI need to set up a server for my company.There are only 4 people working here and we want a server that will allow us to run a cloud-like system. We want to be able to log in and use programs and have our files available from within the office and at home. I've used Citrix in the past and would like something similar, but free/open source if possible.I want an Ubuntu based server that gives the user a windows compatible environment. What I mean is it needs to be able to run windows software.What kind of hardware do I need? We want to run fairly resource hungry software like GIS and mapping software. I want to run Ubuntu server but what other software will I need?
View 9 Replies View RelatedI was asked to install a mail server for the company I work for 'cause the mail fowarding service is getting pretty expensive. As an openSUSE user I decided to use my beloved distro for that task rather than a Windows 2003 Server. I want to avoid using MS Windows OS and use openSUSE so I can introduce this "new" technology to the company. I have the evil () plan to progressively migrate from MS Windows to Linux and this is an excelent opportunity for showing what is Linux capable of. Unfortunately I'm a rooky Linux admin and I could not get any satisfactory results yet. For testing purposes I managed to point an MX record to an static ip address (200.69.219.57) using No-Ip service. I've tested it using dig unitan.sytes.net MX command.
Then I installed openSUSE using 3 hdd, 1 for system files and directories and 2 setting up a RAID 1 array mounted under /var directory because I've read that there is where the e-mails will be stored. I've followed a couple of documents presented in these forums to no avail. I did install the system using LDAP but I could not get/install/create any certificate so users could not authenticate (Dovecot said so)
What's the size of your /home partition? I'm thinking about 1~2 GB, but then there is Wine's C drive. Is it good to move the C drive folder on another partition and pointing to it with a symbolic link?
View 3 Replies View Relatedi got low space left on my home folder .. i installed ubuntu and set home folder's size to 20 gbs and 70 gbs for my "/" partition , 2gbs for swap.Is there a way to increse those 20 gbs ? maybe take a lil from my "/" partition?
View 2 Replies View RelatedI have been using ubuntu for about a year now. Since then one main thing have evaded me: how to increase the size of /home without reinstalling the OS. I tried to change the size from the default 200mb once while installing and it ended up messing up my hard drive, so I decided not to do it this time around because I have important stuffs on it.
View 9 Replies View Related.I want to increase the /home directory size. How can I do that.I have copied all the files into another directory.
View 7 Replies View RelatedI need to increase the size of my /home directory. I am working with Ubuntu(2.6.35-22-generic #33-Ubuntu SMP Sun Sep 19 20:34:50 UTC 2010 i686 i686 i386 GNU/Linux
I checked the partitons with df -h command...the output is :
Filesystem Size Used Avail Use% Mounted on
/dev/sda7 11G 4.3G 6.2G 42% /
none 1001M 560K 1000M 1% /dev
none 1006M 188K 1006M 1% /dev/shm
[Code]....
Clearly /usr has loads of space here...and I dont know /home is mounted with which partiton...I read somewhere that tune2fs command could be useful here...I dont want to experiment and mess up here..
What is the minimal size for a home directory?I did a manual partition install in VirtualBox. My vdi had these settings: RAM = 500MB & HDD = 10GB.Does this look correct.I am never certain as to the options for Primary, Logic, Beginning and End.Does it matter the order in which you make partitions in Ubuntu?
View 4 Replies View Relatedhow can i increase my user's home folder size to 3Gb or more? of-course with using webmin
View 5 Replies View Relatedwant to install 11.2 version. my machine config is as belows. pentium 4 with 1.8 gz, 512 ram and 15 gb hard disk. i want to know what should be the partition size specially for swap, root ,home etc.and what version i.e genome or kde should i install.
View 1 Replies View Relatedwhenever I try to download anything I get the error there's not enough space on my home partition; thus I was wondering if anyone would be able to tell me how to increase its size? I'm using ubuntu via vmware workstation.Here is the output of df:
Filesystem 1K-blocks Used Available Use% Mounted on
tmpfs 254964 0 254964 0% /lib/init/rw
varrun 254964 52 254912 1% /var/run
[code]...
how do I increase the size of my home folder in OpenSuse11.3
View 12 Replies View RelatedWhen running the umount command like this as superuser: umount /dev/sda8. get the following message:umount: /home: device is busy.(In some cases useful info about processes that usethe device is found by lsof(8) or fuser(1))
View 9 Replies View RelatedI have a home directory which is mounted on the LVM partition,How can i reduce the size of LVM partiotion without loosing the data on home directory...whenever i use lvreduce command it show me a warning mesg that the whole data will be lost...reducing the size of LVM partition without loosing my home directory data.
View 1 Replies View RelatedRight now i have a HP DL 180 Server with 130 Gb Hard Disk & 8 Gb ram after Raiding0+1. i want to configure Domain Controller Server for my office for 200 to 300 Users. what should the partition size must be mentioned in my 130 Gb Hard Disk, is that going to be Sufficient for ME ?
i am bit confused about /Usr /Var /Boot partitions, as i need to manage perfectly in 130 GB
if i go with 4 Gb swap and remaining for " / " is that will be fine ? should i need to specify partition sizes separately for / tmp /var / usr ..
Trying to get company VPN installed onto 11.3 ... I had this running under 11.2 ... I've been following other threads and tutorials in trying this ... I unzip the vpn, and patch using the 2.6.31-final.diff patch ... I get:
vpnclient # patch < ./vpnclient-linux-2.6.31-final.diff
patching file interceptor.c
Hunk #1 succeeded at 192 with fuzz 2 (offset 72 lines).
Hunk #2 FAILED at 136.
[Code]....
i recently installed apache2 mysql php exc. to run a realtime stat site for my servers.the only thing is that the buttons/ images are not showing up.i checked that my GD was up to date and installed perl5 GD. dont know what else to check.my site with problems go to:http://24.20.177.228/stats_public
View 2 Replies View RelatedI'm new to setting up Linux Servers. I've setup a Ubuntu 10.10 Server along with CUPS and I'm using Webmin to talk to the server. I have a HP PSC 1315 Multifunction printer connected via usb to the server. Using the CUPS web interface I am able to get the server to detect the connected printer and it identified the HP PSC 1310 Series drivers.
When I printer a test page from the server's screen the print job goes through ok and the size was about 5k.
I then setup a samba share to allow my Windows 7 machine to share the printer. Windows 7 is able to pick up the shared printer correctly and I used the default HP 1310 Series drivers. When I tried to send a test page to the printer, that single page ended up being 3887kb and I also tried printing out a single paged word document which ended up being over 7MB.
How can I increase the size of a server partition as /dev/loop0
Disk informationDeviceMount pointUsage
/dev/loop0/var/tmp2% (11,070 of 495,844)
/dev/sda1/46% (100,819,056 of 233,872,292)
/usr/tmpDSK/tmp3% (11,070 of 495,844)
I use
WHM 11.30.1 (build 4)
CENTOS 5.6 i686 standard on ds-59085
I work for a large company & have installed Ubuntu 10.04 on a PC to run a CNC machine. The problem is I cannot connect to the internet to complete the Ubuntu install.
The PC is Win Vista 32-bit & the internet is working fine on the Vista side. It is a wired network. I do have proxy info but can't find where that needs to be in Ubuntu.
I have a domain I have never used for some years, the registrar put some adds in it, now I have hosted and configured this domain as a VPS and have started to put files in it but when I enter the domain in the browser, it still displays the adds index of the registrar although I have my own index file in /var/www/. I thought the domain was automatically "taken over" (I do not know the correct technical expression) by the hosting company when my hosting is accepted by the host after they install a bare distro. Obviously, my expectation was incorrect and there is something else I need to do.
View 2 Replies View RelatedI am using fedora 9.0 and use squid stable 15 also i need help about advertisement. how can i advertise our company in every website
View 1 Replies View RelatedI'm the opensource nut at my company (which services MS networks) and I've been asked to set up an internal forum for our tech's to use to sever much like a knowledge base. I've never set up any forums before and was wondering what YOU guys recommend to use. I've briefly looked at Joomla and it seems nice and fairly easy to use.
View 1 Replies View RelatedI am attempting to setup my home ubuntu-box (10.04, 64bit) to vpn into work (cisco).My attempt has been partially successful - connecting successfully to shared drives - but I can't access the internal company sharepoint site (using network-manager-vpnc). When I enter the URL into firefox, it tries for a few seconds then displays the "connection was reset" error page (see attached). I don't even get the normal pop-up dialog asking for my credentials! The URL is resolvable to an IP, and the server can be pinged successfully.
So, to make sure my home network wasn't to blame, I brought home a work laptop with a windows vpn client. This worked fine.I then went to work with Ubuntu-NR on a USB stick and booted up into ubuntu to make sure ubuntu wasn't to blame. This worked fine
Is use of GPL software in a commercial (for profit) company free and legal? I spent half an hour searching for answer but found nothing. All was the same mambling about re-distributing and modification. I found nothing related to plain old USE.
View 9 Replies View RelatedI am trying to access my company VPN using my Centos 5.5 laptop. I have the vpn client certificate issued by my company's IT dept. I am able to access the webmail using the same certificate which I installed in firefox. But I would like to know how to use this certificate to sign in to the VPN. Some of my colleagues use the Cisco VPN client v5.0.? software and the vpn client certificate to login. It works fine. But I would like to do the same with Centos.I tried connecting using vpnc. I converted the pcf file to conf using pcf2conf. Converted the certificate to .pem file. I replaced the /etc/vpnc/default.conf file with the pcf2conf converted file. Following is the converted conf file:
IPSec gateway example-vpn.companyname.com
IPSec ID <groupid>
IPSec secret <groupsecret>
[code]....
How to check whether the hosting company has fsockopen enabled?
View 1 Replies View Related