I have been using ubuntu for about a year now. Since then one main thing have evaded me: how to increase the size of /home without reinstalling the OS. I tried to change the size from the default 200mb once while installing and it ended up messing up my hard drive, so I decided not to do it this time around because I have important stuffs on it.
View 9 RepliesWhen partitioning disk devices for F14 on my new x86-64 box, I allocated 100G for / mounted on /dev/sda1. It's now 100% full. I have 365G free space available on the disk. Can I somehow extend /dev/sda1 to use some of this free space?
View 7 Replies View RelatedHow to expand a partition size for which it was fixed.
View 2 Replies View RelatedMobo - Asus M4A78T-E
CPU - Phenom II X4 955
RAM - DDR3 1333 dualchannel 8G
Display - Samsung 2494
Debian 504 64bit
Where can I download respective drivers. Linux drivers coming with the mobo can't work. There is no driver for Linux on the CD coming with the display. Fonts becomes very large even selecting "8". The screen can't expand to the full size of the display.
So, I wan't completely paying attention to the default partitioning that Red Hat Enterprise 6 does.
I was setting up a base image for VMWare and the disk was 200GB, but for some reason the default is for about 40% to go to the root partition and then the rest of it to go to /home (this doesn't include the 2GB or so in swap).
Is there an easy way to recover the space under /home and expand the root partition? Assume there are no user accounts created.
want to install 11.2 version. my machine config is as belows. pentium 4 with 1.8 gz, 512 ram and 15 gb hard disk. i want to know what should be the partition size specially for swap, root ,home etc.and what version i.e genome or kde should i install.
View 1 Replies View RelatedWhen running the umount command like this as superuser: umount /dev/sda8. get the following message:umount: /home: device is busy.(In some cases useful info about processes that usethe device is found by lsof(8) or fuser(1))
View 9 Replies View Relatedran out of space in my /home dir. Have a second hard drive to install and would like to designate it as additional space for /home. I do not want to mount it as a dir inside my home I would like it to simply work as though my /home simply has more space available to it.
View 1 Replies View RelatedWhat's the size of your /home partition? I'm thinking about 1~2 GB, but then there is Wine's C drive. Is it good to move the C drive folder on another partition and pointing to it with a symbolic link?
View 3 Replies View Relatedi got low space left on my home folder .. i installed ubuntu and set home folder's size to 20 gbs and 70 gbs for my "/" partition , 2gbs for swap.Is there a way to increse those 20 gbs ? maybe take a lil from my "/" partition?
View 2 Replies View RelatedI need to increase the size of my /home directory. I am working with Ubuntu(2.6.35-22-generic #33-Ubuntu SMP Sun Sep 19 20:34:50 UTC 2010 i686 i686 i386 GNU/Linux
I checked the partitons with df -h command...the output is :
Filesystem Size Used Avail Use% Mounted on
/dev/sda7 11G 4.3G 6.2G 42% /
none 1001M 560K 1000M 1% /dev
none 1006M 188K 1006M 1% /dev/shm
[Code]....
Clearly /usr has loads of space here...and I dont know /home is mounted with which partiton...I read somewhere that tune2fs command could be useful here...I dont want to experiment and mess up here..
What is the minimal size for a home directory?I did a manual partition install in VirtualBox. My vdi had these settings: RAM = 500MB & HDD = 10GB.Does this look correct.I am never certain as to the options for Primary, Logic, Beginning and End.Does it matter the order in which you make partitions in Ubuntu?
View 4 Replies View Relatedhow can i increase my user's home folder size to 3Gb or more? of-course with using webmin
View 5 Replies View Relatedwhenever I try to download anything I get the error there's not enough space on my home partition; thus I was wondering if anyone would be able to tell me how to increase its size? I'm using ubuntu via vmware workstation.Here is the output of df:
Filesystem 1K-blocks Used Available Use% Mounted on
tmpfs 254964 0 254964 0% /lib/init/rw
varrun 254964 52 254912 1% /var/run
[code]...
.I want to increase the /home directory size. How can I do that.I have copied all the files into another directory.
View 7 Replies View Relatedin defining the size of /, /home, /usr, /var, /tmp directory.
View 1 Replies View Relatedhow do I increase the size of my home folder in OpenSuse11.3
View 12 Replies View RelatedI have a home directory which is mounted on the LVM partition,How can i reduce the size of LVM partiotion without loosing the data on home directory...whenever i use lvreduce command it show me a warning mesg that the whole data will be lost...reducing the size of LVM partition without loosing my home directory data.
View 1 Replies View RelatedI was previously running 10.04 32bit. Recently upgraded my cpu/ram, so figured I'd try 64 bit. On my previous setup, I had / in one partition, /home in another, plus a few other partitions (/backup, etc).
I did the install of 64 bit, but was too scared to point /home in 64bit to the previous /home. After the install, now all those previous partitions/mounts are on /media. I'd like to just point /home at the previous partition. Should I mess with /etc/fstab to do this or will it cause problems? Is the easiest thing to do reinstall, then point the new install to use the pre-existing /home? Wasn't sure if that would cause problems or not. I've backed up most of the previous /home area, so worst case, if it gets blown away, I should be alright.
I am running Folding with the multi-core High performance client and would like to set this to be a service rather than have to run it by hand, so to speak, when the machine is booted.
How do I go about setting a service up for this.
Is it possible to use a pen drive to expand the amount of ram you have? In Lucid 10.04 LTS.
View 1 Replies View RelatedI want resize my partitions, i need more space for ubuntu, i already have 58gbs of free space, but i dont know how i can expand my partitions, i have tried "GParted Partition Tool", but it won't allow me to do it. The only other thing i can think of is re-installing ubuntu, and if i have to reinstall it how can i retain my settings and programs that i have installed?
View 6 Replies View RelatedTrying to clean install 11.2 dual boot with Win xp already installed. How do I create a new home partition, don't want to preserve the existing home partition from a previous attempt. DVD installation and automatic config keeps saving the thing.
View 5 Replies View RelatedI've got a 500gb hard drive.
-sda1 is 400gb (ubuntu 9.10/32bit/ext3)
-sda2 is 50gb (ubuntu 10.04/64bit/ext4)
I would like to expand my lucid partition now and eventually get rid of my 9.10 partition. I've got an 80GB virtualbox file sitting on sda1 that I need and want to expand sda2 now so I can first copy the VB file over, then expand sda2 completely. I just finished creating sda3 ext4, but cant figure out how to merge it with sda2 (well really sda6). Please see image. [URL]
I need to expand my ntfs and have ample GB, all taken up presently so if I create some unallocated GB's under ntfs how do I expand the ntfs partition. I have gparted live CD.
View 1 Replies View RelatedI created a dual boot on my computer with windows vista and ubuntu using the wubi ubuntu installer for windows, and my ubuntu boot is limited to 15gb of hard drive space. My hard drive in actuality has about 150gb left on it. How do I expand the amount of storage ubuntu is allowed to use?
View 6 Replies View RelatedI have decided that Windows 7 is something that belongs MAYBE in a virtual machine and that I have no use for it. Therefore, I want to recover the 130 gigs it takes on my hard drive and add that to my Ubuntu partition.
Here is the output of fdisk -lu:
Code:
I want to edit my volume meter so that way i can change my volume but be more precise about it. I mean if i slightly slide my finger a little bit it goes from to mute to all the way up. (I have a touchpad buttons)
View 2 Replies View RelatedWhen I use disk utility to expand my RAID array it creates a partition on my 1.5TB drive which it would like to add to the RAID 5.
However, none of the drive existing on the RAID are partitioned so what I think has happened is the partition itself has created a difference of about 2 million bytes smaller than the others and thus unable to add the component.
How can I specify the exact bytes for my hard drive partition so that I can add this to the array?
I have just gotten back into Ubuntu and installed 11.04. However I happen to see alot of issues with this. Trying to run compiz and all bejesus is breaking loose on me here. The biggest frustrating one is this new desktop, after searching I found how to go back to old school way I use to use it.So, now I get into this desktop, start compiz after the other desktop totally barfed on me, this one is doing the same as well.I lost all of my little boxs at top to close minimize and expand the windows.
Seriously, they took something and turned it into this just so ppl quit complaining about moving from windows to this. I for one dont like it and it doesnt work right with nothing,(Sounds like windows ughh) very hard to navigate, where you think one thing is suppose to be and they totally moved it, took me half of yesterday to get my wifi working but only after I went back to old desktop, video wasnt working properly, only after I went back to old desktop.