What is the minimal size for a home directory?I did a manual partition install in VirtualBox. My vdi had these settings: RAM = 500MB & HDD = 10GB.Does this look correct.I am never certain as to the options for Primary, Logic, Beginning and End.Does it matter the order in which you make partitions in Ubuntu?
View 4 RepliesI need to increase the size of my /home directory. I am working with Ubuntu(2.6.35-22-generic #33-Ubuntu SMP Sun Sep 19 20:34:50 UTC 2010 i686 i686 i386 GNU/Linux
I checked the partitons with df -h command...the output is :
Filesystem Size Used Avail Use% Mounted on
/dev/sda7 11G 4.3G 6.2G 42% /
none 1001M 560K 1000M 1% /dev
none 1006M 188K 1006M 1% /dev/shm
[Code]....
Clearly /usr has loads of space here...and I dont know /home is mounted with which partiton...I read somewhere that tune2fs command could be useful here...I dont want to experiment and mess up here..
.I want to increase the /home directory size. How can I do that.I have copied all the files into another directory.
View 7 Replies View RelatedI have a home directory which is mounted on the LVM partition,How can i reduce the size of LVM partiotion without loosing the data on home directory...whenever i use lvreduce command it show me a warning mesg that the whole data will be lost...reducing the size of LVM partition without loosing my home directory data.
View 1 Replies View RelatedI have an interdependent collection of scripts in my ~/bin directory as well as a developed ~/.vim directory and some other libraries and such in other subdirectories. I've been versioning all of this using git, and have realized that it would be potentially very easy and useful to do development and testing of new and existing scripts, vim plugins, etc. using a cloned repo, and then pull the working code into my actual home directory with a merge.
The easiest way to do this would seem to be to just change & export $HOME, eg
cd ~/testing; git clone ~ home
export HOME=~/testing/home
cd ~
screen -S testing-home
# start vim, write/revise plugins, edit scripts, etc.
# test revisions
However since I've never tried this before I'm concerned that some programs, environment variables, etc., may end up using my actual home directory instead of the exported one. Is this a viable strategy? Are there just a few outliers that I should be careful about?
Is it possible to split the home directory into 2, 1 for the personal files (documents, images, videos, music, etc.) and another for the setting files (config, temp, etc.)
View 9 Replies View RelatedI have been out of the Linux loop for a while. Prior to the holidays I did something 'stupid' within Wine and ended up taking out my Ubuntu partition to the point where it wouldn't boot. Being that I have a triple boot system and I had plans for the holidays, I didn't want to risk a reinstall in the event that if something went wrong with Grub, it would render my whole system useless. So I waited until now to reinstall Ubuntu. I performed the reinstall this past weekend and for the most part I thought everything went fine, but I noticed something was different with the file system.
When I attempted to load a 3.5gig program into Ubuntu yesterday, I got an error message saying that I don't have enough disk space. I said to my self, "That is impossible as I have a 106gig partition for programs". I have a separated system in which Ubuntu /root has an 8gig partition and the Home partition supposed to be the 106gig drive. I did this in the event I had to reinstall, I wouldn't loose my information. Well apparently something went wrong with the install and it appears that I have two Home folders...one is on the 106gig drive and the other is in the root directory.
Making note of that explained why my program wouldn't load because the root partition is only 8gig. So, my question is this: Can I set Ubuntu back to the old Home directory, or do I have to reinstall once again? As what under my avatar says, I am on Ubuntu Studio 8.04 (Hardy Heron). I stuck with this older version because it has long term support. I have a triple boot system with Windows XP, Puppy Linux, and Ubuntu Studio. I have two SATA 500gig drives with the first drive being home to all the operating systems and programs. The second drive is just for data.
Here is my fdisk -l I put the partitions usage in parenthesis:
geo@ubuntu:~$ sudo fdisk -l
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x000cf364 .....
I tried upgrading to 10.04, and now when it boots it just goes into a grub2 terminal and doesn't display a boot menu. I tried re-installing grub2 from the live cd, but that didn't do anything. I figured if I've hosed the last install I'll install from scratch, but I can't even access my files from the live cd! I did a bit of searching and everyone seems to just encrypt ~/Private, whereas I've encrypted the whole home directory. So much for security... In the live cd, it has a readme.txt and says to type "ecryptfs-mount-private" to access the files, but it just gives the error "ERROR: Encrypted private directory is not setup properly". What do I do?
View 3 Replies View RelatedI did a fresh Maverick install with custom partition layout and didn't select "encrypt home parition" as my home partition was being saved from previous installation.Now, is there a guide I could follow to encrypt my home partition the same way Maverick would do? I just want to avoid screwing my system in the next upgrade if encrypting methods differ.
View 2 Replies View RelatedI installed a new 11.04 on my Thinkpad in place of the old 10.10 system, so it replaced the old /home with a new empty one. But I had previously done a partition copy of the original 10.10, complete with /home to a spare HDD so now I can copy that /home in place of the new empty /home. What's the best way to do that? Should I use 'dd'? Should I use Nautilus? Or should I partition-copy that copy of the 10.10 onto available space on the thinkpad 11.04, then manipulate the partitions to consolidate? Maybe create a separate /home partition?
View 4 Replies View RelatedI'm trying to relocate my home directory which currently resides at the default, root location /home/user.
My Systems Specs:
Karmic64
Root resides on a Raid0 LVM MD0
NEW Drive resides on Raid0 LVM MD1
I installed a new disk on a LVM(Logical Volume Manager), and now want to move my default home directory to the new location. I did rsync my home directory from the OLD to the NEW. When I do update my /etc/fstab with the NEW home location, I recieve errors upon rebooting, that certainly relate to permission issues, including some from Nautilus that mentions permissions issues...
I also tried to update the USERS/GROUP Manager with the NEW location but after reopening the USERS/GROUP manager, I can see the original location has been reverted back. I can create a new user and succesfully map their home directory to the NEW home location on my MD1 LVM. Any links on home to remap their existing HOME directory to a new location?
I had errors pop up when I tried updating my 10.10 to 11.04 so I ended up having to do it from a Live USB which installs it over everything (fine by me).Unfortunately I forgot I had an encrypted /home directory. So various messages and stuff came up when I tried to log in.nfortunately I don't remember what my encryption passphrase is offhand, so I moved it to a slightly different folder name and had to have a new directory created for my username.It's still there, but how can I try to open it trying the various versions of the passphrase I think it may be? Can I double-click it and try?Also, in the future what is the best way to handle a "fresh" install that I want to connect to my encrypted /home directory?
View 4 Replies View RelatedI have a dual-boot macbook with an OS X partition and an ubuntu partition. When I first installed ubuntu, I changed my home folder to my OS X home directory to synchronize all my files from both. My home directory is now /media/sda2/Users/username/. In a regular home folder, the icons for Documents, Music, Pictures, Movies, etc. are different (not just with emblems, but actually different icons). But when I changed my home folder, these subfolders' icons stayed the same as regular folder icons and I can't figure out a way to change that default setting. I know how to change the icons for each folder manually, but these changes don't appear everywhere (i.e. nautilus, places, etc). Furthermore, every time I change my icon theme, I would have to manually reassign icons for these folders. Is there a way to globally change the folder icons for these folders?
View 2 Replies View RelatedI recently bought a new hard disk for my /home tree. I don't have encrypted home directories currently, but I was wondering if there is an easy way to encrypt my home directory so that it is automatically decrypted when I'm logging in (console/kdm). Basically I would like to manually do same thing as Debian installer would have done.
I'm running Squeeze.
I need to specify a different path to home directories on a particular server than what LDAP contains for the users, besides using a symlink. E.g. "/Users/jdoe" vs "/home/jdoe" I don't want to change the actual LDAP attributes, just want a particular server to point them in the right direction (Ubuntu 10.04).
I'm assuming it's something I could probably set in pam configurations?
I have a strange problem when I do SSH to a FEDORA9 based Linux Server.
[Code]....
When I login using "adah" username in TELNET I am automatically directed to my home directory at location "/media/disk-1/home/adah". But when I use SSH to login using the same username I get the following message Code: Could not chdir to home directory /home/adahaj: Permission denied
I have a secondary disk which holds a /home directory structure from a previous install of Linux. I installed a new version on a new primary drive and mounted this secondary drive as the new /home. Problem is, even though the users are the same names and I can access the home directories for the users, I cannot login directly to their home directories, as I get the following error: -
Code:
login as: [me]
[me]@[machine]'s password:
Last login: Wed Jan 6 18:34:33 2010 from [machine]
Could not chdir to home directory /home/[me]: Permission denied
[[me]@[machine] /]$
Now, since the usernames are correct and the users are in the passwd file with the correct home directory paths, could it be user ID's that are different or something else? It's not as though I cannot access the home directories for the users, simply that I cannot log directly into them from a login prompt.
Is there anything special about a home directory before users' home directories are stored there, or is just as typical as any other "empty" folder?Let me just cut to the chase, but please no ear ringing about the folly of messing around as root, particularly with directories at root level. I know it's considered stupidity, but I deleted my home directory.
Is there an easy way to restore a working home directory? I tried copying /etc/skel under root, but I'm not sure what a home directory should look like once it has been restored. Besides . & .., there were .screenrc & .xsession in my home directory when I copied /etc/skel. Are these files suppose to be in "/home" or "/home/~" or both?
I have Ubuntu Karmic. I chose to install with an encrypted home directory. Recently I got a warning that I only had 2GB of drive space left. This is mostly because of my videos. So I went and bought a new hard drive and partitioned it and made 1 ext4 partition and copied my videos all to the new hard drive. I added a line in my fstab to mount the new hard drive to ~/videos, but when I reboot the computer, there is a screen saying something like "error mounting /home/me/videos, press S to skip or something else to reboot". If I press S to skip, then when my system comes up there is a video directory but it's empty because my other hard drive didn't get mounted. I can run sudo mount /dev/sdb video/ and it will mount fine and I can see all my videos, so why can't fstab mount it? Does this have something to do with my encrypted home directory?
View 14 Replies View Related1. yum install vsftpd
2. service vsftpd start [ok]
3. nmap from outside verifies tcp 21 is open for business
4. ftp myipaddress.com results in login failed for user root.
I want to login as root and have access to '/' as my home directory. What do I have to do to get this to work?
After a long time I tried ubuntu(9.10) again on my fileserver, I have some remarks; why does a minimal server installation include X/openoffice? I don't need document conversion on a fileserver and I bet a lot of people don't. Wouldn't it be better to create a new server package and leave minimal minimal? low memory installs (64mb) don't work unless you configure swap by hand in between things, 64mb ram is a lot in my eyes. I mean, not to be rude but if I wanted all this I could've better installed Solaris.
That said it's stable and running fine. Since it's my home fileserver I tried to convert my previously created raid10 mirror on an adaptec 1200 card to a softraid 5 solution. This is wat I did:
[Code]...
I've been running my Dell Mini 9 with the latest alpha for 10.04 since January, but over the weekend I botched things pretty badly and decided to go back to 9.10.I saved my home directory to another machine, and proceeded to install from a 9.10 USB disk. Things didn't go terribly well (I kept seeing "devkit-disks-daemon" crashing) but the install did complete. I shutdown the netbook, yanked the USB drive and powered it back on only to be greeted the grub menu. Choosing any option yields: Code:error: out of memoryPress any key to continue...I did a little searching in places like:HTML there is no mention of that problem there, and running though the command line instructions has the same results. (the linux command seems to be the problem)I've tried re-installed grub from the directions on the page but it is failing with:
Code:
cp: cannot stat '/mnt/boot/grub/ufs1.mod': Input/output error
When I look up that file I see:
[code]...
Sometimes you get more than you ask for and in this case, I did: I had no idea (had the computer for a few years now) that I was running a dual core 64 bit machine. The silly thing is that I have 32bit Fedora 11 on it, 32 bit versions of all my installed software...etc., etc. Am I able at this point to salvage anything or is it best to just back up the home directory and then do a reinstall?
View 8 Replies View RelatedI'm using Mac OS X's Terminal.app shell to compile and run Fortran programs. One such program resides outside of my home directory (it is in the Applications folder, which resides on my hard drive but seems to be outside of my home folder). How can I navigate into this directory using Terminal.app to run the programs that reside there?
View 7 Replies View RelatedWhat's the size of your /home partition? I'm thinking about 1~2 GB, but then there is Wine's C drive. Is it good to move the C drive folder on another partition and pointing to it with a symbolic link?
View 3 Replies View Relatedi got low space left on my home folder .. i installed ubuntu and set home folder's size to 20 gbs and 70 gbs for my "/" partition , 2gbs for swap.Is there a way to increse those 20 gbs ? maybe take a lil from my "/" partition?
View 2 Replies View RelatedI have been using ubuntu for about a year now. Since then one main thing have evaded me: how to increase the size of /home without reinstalling the OS. I tried to change the size from the default 200mb once while installing and it ended up messing up my hard drive, so I decided not to do it this time around because I have important stuffs on it.
View 9 Replies View RelatedI have 2 directories in my home folder that I would like to set a size limit on. The directories are ~/backup and ~/temp. Is there an easy way to limit the size of a directory without having to make partitions?
View 4 Replies View Relatedhow can i increase my user's home folder size to 3Gb or more? of-course with using webmin
View 5 Replies View Relatedwhenever I try to download anything I get the error there's not enough space on my home partition; thus I was wondering if anyone would be able to tell me how to increase its size? I'm using ubuntu via vmware workstation.Here is the output of df:
Filesystem 1K-blocks Used Available Use% Mounted on
tmpfs 254964 0 254964 0% /lib/init/rw
varrun 254964 52 254912 1% /var/run
[code]...