Trying to get company VPN installed onto 11.3 ... I had this running under 11.2 ... I've been following other threads and tutorials in trying this ... I unzip the vpn, and patch using the 2.6.31-final.diff patch ... I get:
vpnclient # patch < ./vpnclient-linux-2.6.31-final.diff
patching file interceptor.c
Hunk #1 succeeded at 192 with fuzz 2 (offset 72 lines).
Hunk #2 FAILED at 136.
[Code]....
I was asked to install a mail server for the company I work for 'cause the mail fowarding service is getting pretty expensive. As an openSUSE user I decided to use my beloved distro for that task rather than a Windows 2003 Server. I want to avoid using MS Windows OS and use openSUSE so I can introduce this "new" technology to the company. I have the evil () plan to progressively migrate from MS Windows to Linux and this is an excelent opportunity for showing what is Linux capable of. Unfortunately I'm a rooky Linux admin and I could not get any satisfactory results yet. For testing purposes I managed to point an MX record to an static ip address (200.69.219.57) using No-Ip service. I've tested it using dig unitan.sytes.net MX command.
Then I installed openSUSE using 3 hdd, 1 for system files and directories and 2 setting up a RAID 1 array mounted under /var directory because I've read that there is where the e-mails will be stored. I've followed a couple of documents presented in these forums to no avail. I did install the system using LDAP but I could not get/install/create any certificate so users could not authenticate (Dovecot said so)
I work for a large company & have installed Ubuntu 10.04 on a PC to run a CNC machine. The problem is I cannot connect to the internet to complete the Ubuntu install.
The PC is Win Vista 32-bit & the internet is working fine on the Vista side. It is a wired network. I do have proxy info but can't find where that needs to be in Ubuntu.
I have a domain I have never used for some years, the registrar put some adds in it, now I have hosted and configured this domain as a VPS and have started to put files in it but when I enter the domain in the browser, it still displays the adds index of the registrar although I have my own index file in /var/www/. I thought the domain was automatically "taken over" (I do not know the correct technical expression) by the hosting company when my hosting is accepted by the host after they install a bare distro. Obviously, my expectation was incorrect and there is something else I need to do.
View 2 Replies View RelatedI am using fedora 9.0 and use squid stable 15 also i need help about advertisement. how can i advertise our company in every website
View 1 Replies View RelatedI plan to host a Server. I want to know which is the best for Visualization.
Cent OS = > Xen
VMware = > open source.
i need to host a intranet in my company. they r going use java web based.which way is the best solution improve the I/0 request speed.
I'm the opensource nut at my company (which services MS networks) and I've been asked to set up an internal forum for our tech's to use to sever much like a knowledge base. I've never set up any forums before and was wondering what YOU guys recommend to use. I've briefly looked at Joomla and it seems nice and fairly easy to use.
View 1 Replies View RelatedI know Ubuntu is opensource and free to use and develope, but can one start a company and install Ubuntu Server on a server and sell it, as one complete package?
View 2 Replies View RelatedI am attempting to setup my home ubuntu-box (10.04, 64bit) to vpn into work (cisco).My attempt has been partially successful - connecting successfully to shared drives - but I can't access the internal company sharepoint site (using network-manager-vpnc). When I enter the URL into firefox, it tries for a few seconds then displays the "connection was reset" error page (see attached). I don't even get the normal pop-up dialog asking for my credentials! The URL is resolvable to an IP, and the server can be pinged successfully.
So, to make sure my home network wasn't to blame, I brought home a work laptop with a windows vpn client. This worked fine.I then went to work with Ubuntu-NR on a USB stick and booted up into ubuntu to make sure ubuntu wasn't to blame. This worked fine
I need to set up a server for my company.There are only 4 people working here and we want a server that will allow us to run a cloud-like system. We want to be able to log in and use programs and have our files available from within the office and at home. I've used Citrix in the past and would like something similar, but free/open source if possible.I want an Ubuntu based server that gives the user a windows compatible environment. What I mean is it needs to be able to run windows software.What kind of hardware do I need? We want to run fairly resource hungry software like GIS and mapping software. I want to run Ubuntu server but what other software will I need?
View 9 Replies View RelatedIs use of GPL software in a commercial (for profit) company free and legal? I spent half an hour searching for answer but found nothing. All was the same mambling about re-distributing and modification. I found nothing related to plain old USE.
View 9 Replies View Relatedin defining the size of /, /home, /usr, /var, /tmp directory.
View 1 Replies View RelatedI am trying to access my company VPN using my Centos 5.5 laptop. I have the vpn client certificate issued by my company's IT dept. I am able to access the webmail using the same certificate which I installed in firefox. But I would like to know how to use this certificate to sign in to the VPN. Some of my colleagues use the Cisco VPN client v5.0.? software and the vpn client certificate to login. It works fine. But I would like to do the same with Centos.I tried connecting using vpnc. I converted the pcf file to conf using pcf2conf. Converted the certificate to .pem file. I replaced the /etc/vpnc/default.conf file with the pcf2conf converted file. Following is the converted conf file:
IPSec gateway example-vpn.companyname.com
IPSec ID <groupid>
IPSec secret <groupsecret>
[code]....
How to check whether the hosting company has fsockopen enabled?
View 1 Replies View RelatedI have an internet from my mobile company, it isn't ethernet or a usb thats connected to a phone or anything. its basicaly a device that has my mobile card/chip inside and it connects to the internet, here's a picture of the device to give more information.
[URL]
Basicaly on windows xp, or 7, I just plug this into any USB then it automatically installs a software, then program will popup that has "Connect" buttom, I click on that and i'm online, but in linux/ubuntu that auto installation is not coming.
When I try to connect to my company's VPN using the Cisco VPN client, I get a kernel panic. Please don't suggest I should Cisco's client, it only works with Kernels older than 2.6.24 (I have 2.6.35).
So I use vpnc. The error message is:
Quote:
$ sudo vpnc
[sudo] password for phirt:
Enter password for user@group@fubar.net:
received notice of type (ISAKMP_N_NO_PROPOSAL_CHOSEN)(14), giving up
vpnc: quick mode response rejected: (ISAKMP_N_INVALID_MESSAGE_ID)(9)
this means the concentrator did not like what we had to offer.
Possible reasons are:
[Code]...
we hav one of our client want access our company computer from outside network and all our computers are under proxy server therefore all computers have limited access so one of the limited access computer, client has to access from outside. so we want this computer should remain under proxy server as well as accessible from outside network
View 3 Replies View RelatedHow to check whether the hosting company has fsockopen enabled?
View 2 Replies View Relatedi'm new to MySQL and i designed a database using MySQL and PHP recently but dont know how to port it to my host company. How do i save the database on my flash drive then transfer to my host on my website's control panel.
View 1 Replies View RelatedI created an archlinux vm guest using virtualbox on my windows desktop at work. I'm planning to use it for django development because there are no unix machines available to use as a workstation at work.
From the vm guest I can ping/ssh to other machines in the network, but not the other way around. It's like even though the guest machine has an ip address on the network and a hostname, neither is recognizable.
I tried since yesterday to get a VPN-connection but it seems that until now I'm not able to reach the Company-network. Our company use the pptp connection. I tried many different setup's but without sucess. I use Ubuntu 9.10 and installed the pptp-manager.
Following settings:
Gateway (set)
Username (set)
MSCHAPv2 (check)
Point to point (check)
Stateful (check)
BSD (check)
Deflate (check)
TCP (check)
Below you find the result from the syslog, what can I do now?
Code:
Mar 14 13:03:58 snofla-desktop pptp[2767]: nm-pptp-service-2756 log[ctrlp_disp:pptp_ctrl.c:950]: PPTP_SET_LINK_INFO received from peer_callid 0
Mar 14 13:03:58 snofla-desktop pptp[2767]: nm-pptp-service-2756 log[ctrlp_disp:pptp_ctrl.c:953]: send_accm is FFFFFFFF, recv_accm is FFFFFFFF
Mar 14 13:03:58 snofla-desktop pptp[2767]: nm-pptp-service-2756 warn[ctrlp_disp:pptp_ctrl.c:956]: Non-zero Async Control Character Maps are not supported!
Mar 14 13:03:58 snofla-desktop pppd[2759]: Connection terminated.
Mar 14 13:03:58 snofla-desktop NetworkManager: <info> VPN plugin failed: 1 ......
We are going to buy notebooks for our company and as Nvidia graphic card drivers are proprietary I would like to avoid them and support a graphics card company that offers free open source license for their graphics card drivers. Are there any such companies? ATI?
View 3 Replies View RelatedI have the problem with Ubuntu to access the local site within my company network. This network has access to Internet, but the company's site does not have a public address. It is like "http:e-learning.local". I can access this site from any windows machine, but I can't access it from ubuntu. Only if I use IP address, I can access it. However, I have normal access to other sites on the Internet.
Do you have any suggestion how to solve this problem?
I am planning to start a new business where I will get satellite internet as my backbone @ however I need have some questions since my company will be "fully open source" or " Linux-ish" first of all I would like to know which billing software is the best for the job , I came a cross "Optigold isp " and it seems awsome in its features especially the affiliate programs (eg. customer forward 5 more customer and get free month of internet access).
second , I would like to know how the network should be created @ because I will start in one city first and then I will extend to another cities basically in every city there will be one ground station to receive the satellite signal @ but I want to make the billing server and the router in one city only @ what router should I consider @ I dont have that much of knowldge to decide (gentoo , centos , ubuntu ....) even redhat is ok I wold just like to know if there are any pre-packaged solutions , I would like to know
a client asked me to install ettercap on their linux gateway machine - two ethernet machine. I tried it in bridged mode, it but as soon as I start it, the traffic stops and no one can access anything. Did anyone ever succeed in running it on the gateway?
View 1 Replies View RelatedI have a need to create a virtual directory in Apache for one of my company's internal websites. I have confirmed that I can create an alias for a local directory: Alias /vdir/ "/usr/share/somefolder/"
So I would get to this virtual directory by going to http://server.domain.com/vdir/. But when I attempt to point it to a shared folder on another server:
Alias /vdir/ "//servername/share/"
or
Alias /vdir/ "//servername/share/somefolder/"
Both return the 404 Not Found error, which I would expect if it is not connecting to the share. I've searched but can't seem to find the correct syntax and I know I am missing something basic. I have searched google and these forums but can't seem to locate the exact syntax. Are there other lines in the config file I need? Permissions should be no problem the shared is EVERYONE has access (for now).
Problem:Your company network has internal only hosts / websites with names that end in .local, e.g.Your freshly installed Ubuntu machine works fine on the network, has internet access, etc. but cannot connect to these particular systems.Testing DNS with tools like dig / nslookup works fine, but normal name resolution with ping / telnet / browsers does not work.Solution:1. Open a terminal window2. Enter the command sudo nano /etc/nsswitch.conf3. Change the following line:hosts: files mdns4_minimal [notfound=RETURN] dns mdns4to this:hosts: files dns4. Press Ctrl-X, Y, Enter to saveExplanation:Ubuntu ships configured to do name lookups for self-configuring networks, based on the AppleTalk / mDNS / Bonjour protocol. In the configuration shipped for the resolver, this protocol is considered the final aurhority for the ".local" top level domain, and DNS will not be checked. The above configuration change eliminates this and restricts lookups to (a) /etc/hosts file, followed by (b) DNS
View 1 Replies View RelatedI successfully installed OpenSUSE on a 4gb pen drive using the instructions contained within this portal. However, for the life of me I can't figure out why the persistent feature doesn't work.
Here's my partition table map:
Disk /dev/sda: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
[Code]...
I have a box already has openSuse 11 32bits installed. I want to replace it with openSuse 11 64 bits. When I insert the openSuse 11 64 bits CD, I got error message "this is a 32 bit computer. Can not use 64 bit software". so How do I wipe out the old OS (32 bits), and install new OS (64 bits)?
View 7 Replies View RelatedHow to coded version info and other information likes author and company name into the ELF binary?
I prefer the put the version info during build step.