fedora 12.i have one partition which is mounted on a rootfiles folder having space of 700gb which is located on a /directory.but when im adding data on rootfiles my /root directory space is also getting increased.so could any one telme how to increase the size of root partition.i want to resize my rootfiles folder to 600db and want to add 100gb to my / directory.how can i do this plz helpme this is important 4 me.first i will free 100gb then i will add 100gb to root directory.but i dont want to loose any data on rootfiles folder.
Right now i have a HP DL 180 Server with 130 Gb Hard Disk & 8 Gb ram after Raiding0+1. i want to configure Domain Controller Server for my office for 200 to 300 Users. what should the partition size must be mentioned in my 130 Gb Hard Disk, is that going to be Sufficient for ME ?
i am bit confused about /Usr /Var /Boot partitions, as i need to manage perfectly in 130 GB
if i go with 4 Gb swap and remaining for " / " is that will be fine ? should i need to specify partition sizes separately for / tmp /var / usr ..
I have 4 primary partitions on my hard drive. One of these partitions has been divided into 3 logical partitions with some free space left over. The order is this: "swap", "/", "/home", and about 80GB of unallocated space. I want to incorporate that unallocated space into the home partition. I tried this by booting a live CD and starting GParted but it didn't give me the option to increase the size of my home partition or the primary partition as a whole. The only thing it would let me do is decrease the size of my home partition.
Is it possible to increase the size of a partition that is using LVM?I have 5GB of unpartitioned and unallocated space on my disk. I wish to add this to my VG. This free space is physically before the LVM partition.Can I increase the size of the physical partition using pvresize? Or is the only way to to create a new 5GB partition, add it to the VG and allocate it to the LVs? This is not ideal as I wish to minimise the number of partitions I have on the one disk.
I have installed ubuntu in my 500GB passport drive. The ubuntu partition size is 120GB. I want to increase the root partition size because i ran out of disk space for "/" I have installed Gparted and accidentally created new partition table. Then all my disk space turned into unallocated space. So, i immateriality rebooted my system. Then, I am not able to boot into the drive. Moreover it is not detecting in windows too. How to undone that "MISTAKE" ??
I copied 10.4 from a 20gig hd. onto an 80 gig hd with Clonezilla and now I can't get Gparted to expand the partition to include the 50 gig that is unallocated. Obviously I cloned the drive incorrectly.
I have a dual boot machine ( win 7 & Ubuntu 10.04 ) which is reporting insufficient space on the Linux partition. I boot up into gparted and reduce the size of the the preceding partition but when I try to increase the size of the following ( linux ) partition, it won't allow it. Attached is a screenshot of the gparted info screen.
I have booted up in a Gparted system disk. I'm trying to use Gparted to resize my current linux partition. It sits on a one HDD with another Windows partition.I have delete the windows partition (626GB) and now want to resize my linux partition to use all this unallocated space. When trying to resize the linux partition (293GB) I am not able to do so. No space is shown to be available to use. I can only make the partition smaller. Can anyone think of why I won't be able to increase my linux partition to use this now unallocated space?
I have a server setup running VirtualBox and several Windows guests. I'm running the box headless and start the windows machines using
sudo vboxheadless -s "WinXP Pro SP3"&
via SSH session from my MacBookPro in terminal. I then connect to the Virtual Machines running MS Remote Desktop from the MacBookPro. All of this works perfectly except that I've run out of space on my partition for Virtual Machines and need to create a few more. I have plenty of room on the HDD but when first installing Ubuntu Server I only partitioned and formated about 1/4 of the drive. Is it possible to run a command in my SSH session at the command line to partition the unused portion of the HDD, format it, and expand my current partition into that space? Or, do I have to use something like gpartedlive, boot from the CD and do the partitioning?
As can be observed above, I have used almost 70% of the available partition space with only 1.7 GB remaining. I have plans to install Microsoft Office 2007 on Wine and I know that 1.7 GB is not enough for the installation. I don't mind reducing the size of my Windows partitions in order to increase the size of the root.
I have done it quite often. Inserted and run the computer from a live CD so that the hard drive is not mounted an changed the partitions. It worked on the old reiserfs when I wiped the windows partition on my laptop to increase the space, it worked on ext3 partitions. Now I resized the swap partition and reduced the NTFS partition on my desktop - no problem. But it does not increase the ext4 partition. No error message it just does not do it. I tried several times with the suggested maximal setting, with a custom setting, etc. It just does not change size. Just for interest I booted into Suse11.0 live CD and tried from there. There I get the answer cannot resize partition as the file system does not allow resizing. Is something wrong with the system or does the partitioner not work with ext4?
Currently, I have on internal HDD 160GB in size. 20GB are for windows XP partition and the rest is assigned for ubuntu partition(s?). i want to make it now more equal in size, but how can i do that? I'm using ubuntu 11.04...
How does one back up the oses and increase the partition size?
I have a dual boot of Windows 7 and Ubuntu and have made the partitions for each too small. I want to save them and then reinstall them on the new partitions. I've tried clonezilla, but it only restores them to the original partitions. How can I reinstall them on the new partitions?
I have a centos 5.5 server, without a monitor connected to it.Sometime i need to connect to it with VNC, but maximum resolution is 800x600.How can i increase it at least 1024x748 ??I tried in system-config-display changing the monitor to a generic CRT 1024x768, and rebooted.But only allowed resolutions are 800x600 and 640x480.
whenever I try to download anything I get the error there's not enough space on my home partition; thus I was wondering if anyone would be able to tell me how to increase its size? I'm using ubuntu via vmware workstation.Here is the output of df:
Filesystem 1K-blocks Used Available Use% Mounted on tmpfs 254964 0 254964 0% /lib/init/rw varrun 254964 52 254912 1% /var/run
I've got a server that needs more space. To achieve this we added space (by extending the VMware disk attached to it).Normally this isn't an issue, because we just add an new partition and LVM it from there, but this host predates our deployment of LVM everywhere.
Our current theory is that the unallocated sectors can not be assigned because they aren't part of the extended partition, and thus ... we go in a circle.So what i believe the way forward is to extend sda4 so that i can then create an sda10 inside of it. Anyone have any ideas on how to do this? I was thinking gparted may do the trick ... but being a server i'm in runlevel3, with no X...
I have centos 5 virtual server running on ESXi (vsphere 4.1).i have to increase disk space. I increased the size of the virtual machine in Vcenter.But i allready have 4 primary partitions. when i run fdisk /dev/sda, i get this :
Device Boot Start End Blocks Id System /dev/sda1 * 1 13 104391 83 Linux /dev/sda2 14 3916 31350847+ 8e Linux LVM /dev/sda3 3917 6527 20972857+ 83 Linux /dev/sda4 6528 13054 52428127+ 83 Linux
I have nearly 200GB of space free on the HD with my linux main EXT4 partition, and I'm wondering if I can convert a large part of this to a new NTFS partition that I can use for my windows XP paralell install?
Basically, what do I have to do to resize and create the new partition and how do I get windows to recognize it?
From inside my bash script, is there a way to increase my Xdialog default font size? If not, is there any other way to do it? I found a commercial program using Xdialog with instructions on increasing the font size, but they did not say how they did it. But, it does mean it can be done:[URL]...