Server :: Windows 7 To Linux Server Print Job Size Very Large
Jan 21, 2011
I'm new to setting up Linux Servers. I've setup a Ubuntu 10.10 Server along with CUPS and I'm using Webmin to talk to the server. I have a HP PSC 1315 Multifunction printer connected via usb to the server. Using the CUPS web interface I am able to get the server to detect the connected printer and it identified the HP PSC 1310 Series drivers.
When I printer a test page from the server's screen the print job goes through ok and the size was about 5k.
I then setup a samba share to allow my Windows 7 machine to share the printer. Windows 7 is able to pick up the shared printer correctly and I used the default HP 1310 Series drivers. When I tried to send a test page to the printer, that single page ended up being 3887kb and I also tried printing out a single paged word document which ended up being over 7MB.
View 4 Replies
ADVERTISEMENT
May 5, 2011
Right now i have a HP DL 180 Server with 130 Gb Hard Disk & 8 Gb ram after Raiding0+1. i want to configure Domain Controller Server for my office for 200 to 300 Users. what should the partition size must be mentioned in my 130 Gb Hard Disk, is that going to be Sufficient for ME ?
i am bit confused about /Usr /Var /Boot partitions, as i need to manage perfectly in 130 GB
if i go with 4 Gb swap and remaining for " / " is that will be fine ? should i need to specify partition sizes separately for / tmp /var / usr ..
View 3 Replies
View Related
Oct 6, 2009
I think I am having a problem due to an NFS server file size limit. Is it possible I am missing a parameter on the RHEL NFS setup to handle large files? I am running an NFS server on a RHEL 5.1 machine and the HP-UX 11.0 machine does an NFS mount to that file system. The HP-UX executes a program that resides on the HP-UX machine to process a large 35 GB data file that resides on the NFS server machine. The program on the HP-UX can only read/process the first portion of the file until an "RPC: Authentication error" is returned multiple times until the program prematurely decides that it has reached the end of file.
I tried recompiling the same program to run on the RHEL 5.1 NFS server to access the 35 GB file locally (on the NFS server instead on HP-UX) and the program completed successfully, processing the whole file (about 7 hours of processing) with no "RPC: Authentication error." In addition, I have been running the nfs mount with the same machines for quite some time, but not with such large files sizes.
View 3 Replies
View Related
Jun 24, 2011
I am running CentOS 5.5 with a 14T ext4 volume. We are sharing out a few sub-directories via NFS. Our customer was doing some penetration testing with our web app that writes to one of those NFS shares. We are not sure if they did something to cause the metadata to grow so large or if it is corrupt. Here is the listing:drwxrwxr-x 1 owner owner 470M Jun 24 18:15 temp.badI guess the metadata could actually be that large, however we have been unable to perform any operations on that directory to determine if the directory is just loaded with files or corrupted. We have not run an fsck on the volume because we would need to schedule downtime for out customers to do so. Has anyone come across this before
View 2 Replies
View Related
Mar 15, 2010
Does anyone know of a way of limiting a print-job size from samba?
I know how to limit a print job size form cups, and how to require x amount of free space before accepting a job. I've even dug up how to require x amount of free space for samba to accept a print job, but I can't see how to limit samba to only certain sized jobs.
Someone tried to print a >1G file to my print-server this morning, causing me to have a less relaxed Monday than I had hoped. Because it ran out of space before spooling, it was never limited by cups. Because I had to get rid of it ASAP so people could get work done, I have no idea who's it was, or where it came from. Scouring logs didn't give me any good leads either.
View 2 Replies
View Related
Jun 15, 2011
I'm running a Fedora 13 print server, with CUPS package:
Whenever I try to print from a Windows (XP or 7) client to a Samsung ML 3050 printer, the printer pauses itself with the error:
I setup Windows clients with the following URL:[url]
Output from log file attached. This used to work fine previously from Windows, and I can still print from Linux clients.
View 4 Replies
View Related
May 24, 2010
I am looking for a wireless usb print server that will work with my netbook running ubuntu and my main pc running windows.
View 1 Replies
View Related
Feb 5, 2010
I have an old desktop that I'm trying to set up as a home backup/print server. Backup was trivial, but am having issues getting the printing to work. The printer is connected to the server running Ubuntu Server 9.10 (no gui). If I access the printer via http://hostname:631/printers/, I am able to print a test page, so I know the printer is working; however, I am having no luck from Windows. Windows can see the printer when browsed via hostname, but I am unable to connect. Windows says "Windows cannot connect to the printer" without indicating why.
From /etc/samba/smb.conf:
[global]
workgroup = WORKGROUP
dns proxy = no
security = user
[Code]...
View 5 Replies
View Related
Sep 21, 2010
I just setup a Ubuntu CUPS print server. However when I I try to browse to it, it tells me that I do not have permission to do so and does not let me see the printers or any shared folders.
View 5 Replies
View Related
Jul 21, 2010
I have a Samba server running on Slackware 13.0 and its service running with diskspace mounted on a Windows XP machine. Is it possible to mount the XP diskspace on the Samba server?
View 3 Replies
View Related
May 24, 2011
Since last few weeks i am struggling to setup printer connected to print server.
Here is the setup that i have:
I have Red Hat Linux machine from which i want to issue print jobs.
I have Windows Print Server having multiple printers connected to it.
I am able to print jobs from Windows client to any of these printers. But i am not able to print from Red Hat Linux. (i have verified that i can print using smbclient utility, but based on my reading, CUPS API could be used from application to discover, print and issue print jobs.)
I am not able to get the correct configuration for setting up CUPS client.
View 3 Replies
View Related
Oct 9, 2010
I can ssh to the server but it wont allow me edit files, even though I have basic text editors like gedit and notepad installed on my windows computer. Anyone have an idea what the problem is? (I get an error message like this-(gedit:23978): Gtk-WARNING **: cannot open display
View 3 Replies
View Related
Feb 3, 2011
We have 2 servers, 1 is the webserver and the other is the Mysql server.
When transfering a 2GB file from the webserver to the Mysql server.
The webserver's connection to the mysql DB server dies completely.
Need to restart the MYSQL process in order for it to come back online.
During this connection downtime, when using phpmyadmin on the mysql server shows no problem running queries etc.
View 2 Replies
View Related
Jun 8, 2011
I was looking for:how to access my Linux machine(OpenSuse 11.3) that is being hosted at my hoster company from my home Win Pc, I found TightVNC , but I am confused, should I install it on both systems ( viewer and server) ? .. what about the VirtualBox , can i Access with that tool or it is only for mounting the local Virtual Machines?
View 2 Replies
View Related
Nov 28, 2010
I'm trying to design an inexpensive large scale DNS server but fail to find any metrics or methods to base scalabilty.Can anyone offer information on building a stable dedicated DNS server? That might be able to scale well.
View 8 Replies
View Related
Nov 13, 2010
i had installed open suse linux enterprise server 10.2 SP2 (x86_64) i successfully installed the operating system with adding more packages, but after going inside i cannot configure ethernet, though i have 2 ethernet ports, no ports has been found, i installed some drivers but i cannot found the ethernet , while giving command ifconfig i get this ,
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
[code]....
how i need to detect the ethernet card i updated more packages and configured network card but not connected...
View 2 Replies
View Related
Jun 10, 2011
Has anyone had any experience on using SUA(Services for UNIX Applications) rsync to "pull" files down to the Win2k3R2 server from a linux rsync host?I was trying to use cygwin rsync before until I found out from cygwin that the cygwin port of rsync was "flakey" and would fail intermittently for no apparent reason. cygwin suggested I use SUA or SFU for rsync services.
I've looked for/ am looking for any experience using SUA rsync to copy files down from a linux rsync host to the Windows host via rsync on the Windows host. Also, if you have done this successfully, do you have any pointers/caveats you can share on how you got it working? What I am basically looking to do is copy files and subdirectories of files from a linux host using rsync to some static location on a Windows server on a scheduled basis so that I can backup the windows server to tape using Symantec's Backup Exec application.
I'm doing it this way to avoid deploying the Remote Agents for either linux or Windows on the target hosts. As an alternative I've seen reference to a product called DeltaCopy that uses a native Windows rsync port with the native linux port of rsync to do what I need also.I realize this is not a strictly linux question, but more of a hybrid as I'm moving data to and from Windows and linux hosts. So, if this is too Windows-y a question, please say so and I'll withdraw my question.
View 2 Replies
View Related
Apr 16, 2011
I remember it being really easy to add a printer attached to another computer using Ubuntu, but I don't remember exactly what made it so easy. All I know is that now that I have switched to Kubuntu the process has become much harder because now I have to find out some special locations, numbers etc. for it to connect to the printer. It's connected to a Windows XP machine on the other side of the house.
It says alot about 'contacting the network administrator' if I am unsure about what to put in. But I am more or less the network administrator. how to find out what numbers to put in so that my Linux machine can connect and print to the Windows machine? Or maybe someone knows a few commands to share? I go to Applications > Settings > System settings, Printer configuration, New Printer, New Network printer, and then there are a few options but I don't know which one to choose. Windows Printer via Samba, I guess? Then in the box that says smb://[enter stuff here] I need to put in info but I don't know how to find that info.
View 5 Replies
View Related
Oct 25, 2010
We recently shifted our applcation and database to LINUX from UNIX.so now application server(weblogic 8.1) is on linux and oracle database 9i is on linux.previously there is a process in application server(which access the Database dor the data) which took only 1 hour to run on UNIX after shifting to LINUX the same process is taking 4 to 5 hours to run.
but when individually ran the queries on the database it is quck than UNIX.our ADMIN tried changing the kernel parameters for the database server, but it is still the same.
View 10 Replies
View Related
Jul 16, 2011
How can I increase the size of a server partition as /dev/loop0
Disk informationDeviceMount pointUsage
/dev/loop0/var/tmp2% (11,070 of 495,844)
/dev/sda1/46% (100,819,056 of 233,872,292)
/usr/tmpDSK/tmp3% (11,070 of 495,844)
I use
WHM 11.30.1 (build 4)
CENTOS 5.6 i686 standard on ds-59085
View 1 Replies
View Related
Apr 29, 2010
I have installed Fedora 12 with latest updates. My problem is printing from Winstar Networking USB 2.0 Server (WS-NSU62P). This device is attached with LAN cable to Windows XP machine. HP LaserJet 2200d is connected on WS-NSU62P with USB cable. This printer works fine with Windows clients (when you add printer with standard procudure for WinXP OS). Before adding the printer I have to install some drivers witch i found on install cd. I didn't found any drivers for Linux. Specification has info about supported protocol on WS-NSU62P (Network Protocol IPX, TCP/IP, NETBUEI, APPLETALK, LPR, smb (Over IP)
How to set my Printer configuration in Fedora 12 to enable printing from HP LaserJet 2200d connected on Winstar Networking USB 2.0 Server (WS-NSU62P)?
View 11 Replies
View Related
Mar 14, 2011
I'm trying to set up a cups print server on 10.10 server. When I run
Code:
sudo apt-get install cupsys
i get this error
Code:
E: Unable to locate package cupsys
I can find and install all kinds of other stuff and this is a fresh install.
Here's my /etc/apt/sources.list
Code:
#deb cdrom:[Ubuntu-Server 10.10 _Maverick Meerkat_ - Release i386 (20101007)]/ maverick main restricted
# See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to
# newer versions of the distribution.
[Code]....
View 5 Replies
View Related
Nov 29, 2010
i have a problem with cups on a lucid/64 machine.
"Unable to write print data: Broken pipe"
The pdf-file to print has a size of 4,7MB. After sending the file to the printer the size of the file is more than 18 MB.
We use a Xerox WorkCentre 7232 which is via
socket://ip_adress:9100
connected to cups. The same configuration had been working fine for several years with hardy.
Cups refuses to print large files. When splitting up the print-file all works fine.
View 4 Replies
View Related
May 25, 2010
I've noticed my ldap.log file has grown to 30GB and has filled / to 86%..
1. I want to know if I zero out the logfile will this cause any issues while ldap is up and running?
# > ldap.log
2. I will be changing the log file settings in slapd.conf. I will then need to restart slapd.. Will restarting impact existing connections at all?
View 2 Replies
View Related
Apr 25, 2010
I am running Debian Lenny 2.6.26-2-amd64 and I have the following setup:
3 Raid6-Volumes each 19TB size (md0,md1,md2)
I would like to join the three of them to one large LV (of 57TB) formatted with a jfs fs.
I installed:
jfs_mkfs version 1.1.14, 06-Apr-2009
lvm version
LVM version: 2.02.39 (2008-06-27)
Library version: 1.02.27 (2008-06-25)
Driver version: 4.13.0
Prerequisite: the md are assembled and have synched:
Code:
cat /proc/mdstat
Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] .....
I used jfs_mkfs on each of the three mds and mounted the drives to run some checks and they worked without a problem. I am pretty sure the drives/raids are OK. Then I created the VG "pod" with the three drives as members: .....
Then I created a 40TB LV for testing
Code:
lvcreate -L 40T pod
which gave me this
Code:
lvscan
ACTIVE '/dev/pod/lvol0' [40.00 TB] inherit
Then I went on formatting the drive using
Code:
jfs_mkfs /dev/pod/lvol0
Still - everything fine.
When trying to check the partition with jfs_fsck I get:
Code:
ujfs_rw_diskblocks: disk_count is 0
Unrecoverable error writing M to /dev/pod/lvol0. Cannot Continue.
The really funny thing is that I don't seem to get the error if I try to run the thing with a 25TB LV everything looks fine: There is nothing in syslog that would point to the source of this error. Also - if I try to mount the 40TB partition, everything is fine - but when I try to write to it, the whole system hangs and there is no way to recover.
View 9 Replies
View Related
Feb 3, 2011
I've got a server running CentOS 5.5. I used the automated iptables config tool included in the operating system to allow traffic for vsftpd, Apache and UnrealIRCd. When I send large files to FTP, even from the local network, it works fine for a while and then completely times out... on everything. IRC disconnects, FTP can't find it and when I try to ping it I get "Reply from 10.1.10.134: Destination host unreachable" where ..134 is the host address for the Win7 box I'm pinging from. This is especially frustrating as it's a headless server, and as I can't SSH into it to reboot I'm forced to resort to the reset switch on the front, which I really don't like doing.
Edit: the timeouts are global, across all machines both on the local network and users connecting in from outside.
View 4 Replies
View Related
Jun 4, 2011
I use red hat linux es 5. I use startx to start the x-win desktop. But when I use vritual manager . The display application is too large so the bottom part for the application cannot show out. I cannot scroll down to get the display of bottm part. So, I do not know what button display at the bottom part. So, what can I do. I already set the display to 800x640 already.
View 1 Replies
View Related
Feb 25, 2010
We're running
$ cat /etc/redhat-release
Red Hat Enterprise Linux Server release 5.4 (Tikanga)
$ uname -r
2.6.18-164.11.1.el5
It hosts an Apache/2.2.3 web server. We also run apache-tomcat-5.5.23. Most of our programs are mod_perl. Sometimes our users input over-sized data sets, or queries that generate too much output. (I realize that we should try to prevent them from doing that, but right now I'm looking for a more general solution.)
When a large job runs it can 'freeze' our system. The system becomes unresponsive to everything, including command line commands. Sometimes it unfreezes after a while. Once, in this situation I was able to create a high-priority shell. ps reported:
[Code]...
Observing the machine, I see at least one very busy disk. I suspect that some high priority system process (perhaps kswapd) is using all the cpus, preventing anything else from running. Unfortunately, I cannot find much info on kswapd, or debuggging this problem.
View 3 Replies
View Related
May 21, 2011
Looking for script that I can use to install a large set of packages in Ubuntu. Typically, when I'm starting a new server I have to do "apt-get install" on a bunch of packages. I'd like a script that I can add/remove packages from and say yes to all the dependency questions.
View 1 Replies
View Related
May 3, 2010
the application that is giving me the most grief, as far as the dialog box being over-sized for the screen is KDE BasKet - how do I adjust it?
I have looked at the configuring file in the kde home file, but I am not seeing anything that looks like it controls the properties dialog box.code...
View 1 Replies
View Related
