I am trying to run two different copies of vsFTPd service in the same server, one for IPv4 and the other one for IPv6. Because as I know that you cant run one vsFTPd server for IPv4 and IPv6 in the same time.
View 10 RepliesHow can Vsftpd services & Xinetd.d services can be differentiated?
View 5 Replies View Relatedi have a server which i dont know what was installed on it, it was sent for me to find out.
View 5 Replies View RelatedI just made a Ubuntu Server install in a virtual machine and am having trouble setting up FTP to transfer files. I've installed LAMP and vsftp. The web server works great, but FTP gives a connection refused error locally and remotely from the host machine. 'Connection attempt failed with "ECONNREFUSED - Connection refused by server".' nmap localhost doesn't list FTP as open even though I have vsftpd set to listen. I've tried restarting vsftpd with no luck.
View 9 Replies View RelatedIn my server the iptables and ip6tables services are not running. But still i am getting some iptables and ip6tables related alerts on my /var/log/messages. My technical leader told me that there might be some mis-configuration in iptables configuration file. But i didnt see anything wrong.
Quote:
Quote:
What does it mean "Jan 25 11:01:32 beteduibsrv3 avahi-daemon[3308]: Leaving mDNS multicast group on interface eth0.IPv6 with address fe80::226:b9ff:fefc:6ec4."
Howto show all services running/installed in the command line under Centos 5.6 Server?
View 6 Replies View RelatedAny clue? I'm using the same key for root login and it works fine (also works fine for SFTP but i hate using that cause its extremely slow)
View 2 Replies View RelatedI have vsftpd executable with config file.I have put the vsftpd.conf file in /etc path on target board. vsftpd. conf file has option "listen=YES" for running standalone.but when i run the executable(standalone) it is not running. It is not giving any error message also.
View 7 Replies View RelatedI'm using postfix and the always_bcc option to backup the emails which are passed through my MTA. The problem is that (with spamassassin and clamav running as virtual-smtp agents) I get three copies bcc-ed through to the backup account. Is there something I can do to stop the bcc from being carried out on the internal filters and only work on the final send or mailbox delivery?
View 8 Replies View RelatedAfter upgrade of 11.1 to 11.2 I noticed that none of services that was started in 11.1 at boot are starting now in 11.2. I check run-level of services with
Code:
chkconfig --list
When I start services manually everything is OK, but on restart they do not starting. Another weired thing is that my SuSEfirewall2 is filtering everything on input, nevertheless my previous configuration is still there, but ports are closed.
i know that there is already a command for it but it comes out with a lot of letters that makes it hard to find the services that are runningi'm talking about services like DNS, APACHE, DHCP, SAMBA, SSH etcis there a command that will list these services and related services that are running instead of showing a bunch of jumbled and lettered mess thats hard to comprehend
View 6 Replies View RelatedI have a 64bit linux server with 5 virtual hosts on it. When someone fills out a contact form on one of the sites...I get 15-20 copies of the same email. At first I thought it was the kids clicking send multiple times because the first emails were coming from the children's ministry "Email The Cast" section. But then I started getting multiples from the adult sites too. All contact forms are set to come to me.
What's stranger is that my registration section for one of the sites uses the SAME php script (different file) to email me a notification that someone has registered but I only get 1 copy of that.
As an example, I have two servers, sm-i222 and fileserv. sm-i222 is a Win2k3 system running cygwin. fileserv is a linux box running RHEL 4.7. sm-i222 maps /cygdrive/c to the c: drive and /cygdrive/d maps to the d: drive(actually a single 4TB RAID). from the sm-i222 server /cygdrive/c I call a small script from the crontab. The internal IP for fileserv is 10.0.0.7. See below.
cd /cygdrive/d/fileserv/home
rm -rf /cygdrive/d/fileserv/home/*
rsync -avz -e 'ssh -c blowfish' root@10.0.0.7:/home/* .
These three lines perform well in that they make a full transfer of the fileserv:/home/ directory on fileserv to the appropriate place on sm-i222 using rsync. I use rsync instead of scp because I have to traverse subdirectories and symbolic links in the /home/... filesystem on fileserv. What I'm looking to do is use rsync to do an incremental transfer/backup of only the files that have changed since the last full backup. I'll manage the times I do this manually or in crontab. A colleague says this is do-able, but not how. Rsync.org says this is do-able but not how. Cygwin says this is do-able... see rsync.org. I believe what I'm looking for is a single rsync line like I have above that only transfers the changed files on fileserv to sm-i222.
Should I have hal and/or dbus services running when my system doesn't have GUI? For example, in case of a mail/web server where I have console applications only on it.
View 4 Replies View RelatedI have installed release CentOS 5.5 w/ fetchmail services. I've already configured the /.fetchmailrc in the correct format that I've learned from topics and I've checked also the sedmail running status. When I invoke the #fetchmail command this often happens:
fetchmail: WARNING: : Running as root is discouraged.
2 messages for user1 at mx.mailserver.com.ca: (1 of 2) (4353 octets) .....flushed
I have configured two NIC 's One for the public IP and another for the local network, I've tried to use the two IP's in the POP3 and SMTP settings of Mozilla Thunderbird but still user1 can't get messages.
Is there any unix command to list services running on remote unix box.
View 6 Replies View RelatedI'd like to run a Tor relay, but am trying to understand the security implications. For some time I've run my torrent client in a VirtualBox virtual machine, which is run as a very non-prived user, bridges directly to The Internets, and writes to one directory on the host. My belief is this is about as secure as it can be, but am open to suggestion.If I run a relay in the VM it wouldn't be associated with my use of Tor as a client, which is fine since there is no technical need for them to be connected and it's desirable for security.I read that chroot jails can be broken, particularly when run as root, so I don't really trust that. Also studied a vserver, but it must share the network setup which doesn't strike me as isolated enough.
View 14 Replies View RelatedIs there an open source application that can download e-mails from a generic POP mail server, keep a copy of the mails locally and then deliver copies to multiple accounts on a LAN? I have a friend who uses a group e-mail account, and more than one person is always hooked onto that account. The problem is they cannot leave e-mail on the server, as it eats out their webhosting space, but if someone downloads a message in Outlook, the other users do not see that message.
View 1 Replies View RelatedI am baffled by fedora's feeble attempts to work with Samba. I have ran various versions of Fedora for the last few years, and sporadically, the Samba gui and samba itself have had such problems. My current problem in Fedora 11 (64bit) is that samba doesn't seem to be running correctly. It is allowing the hosting of shares, but it does not show that it is running in the services gui. It shows enabled, but when I attempt to change it by starting or stopping, nothing happens. The samba gui also shows that it launches but then never actually starts. I saw very similar problems with Fedora 9.
View 14 Replies View Related Last time I installed the ATI graphics driver on my PC, it was'nt working fine so I uninstalled that driver. I restarted the PC after uninstalling the driver but then, when PC boots and start running the services the screen just hangs and I don't get into the desktop.
I tried to run the xfs service using service xfs restart and also gdm service using service gdm restart, but in both the cases it shows that Unrecognized Service. So, I think it means that the package for xfs and gdm service is not available in my PC. Is that so?
I tried to get into the desktop by running startx but it gave the following error :-
Fatal Server Error: no screen found
consult the fedora project support at [URL] for help.
check the log file at "/var/log/Xorg.0.log" for additional information.
giving up
xinit: connection refused (errno 111): unable to connect to X server
xinit: no such process (errno 3): server error.
I have a little bit of a problem, I run openSUSE as a server on a Dell PowerEdge T610. I use it for sharing files in a local network and as a web server accessible through the public IP (configured through router DMZ). Also, I use Teamviewer for remote control in order to avoid some compatibility and network problems. Generally the computer runs flawless but from time to time, as about once in two weeks, all network related services except the Apache server which runs just fine, and is still accesible, crash. The Samba share can't be accessed anymore, the Teamviewer is also dead and the only way to put everything back in order is a restart. The thing is I don't know if an error occurs since the server hasn't got a monitor installed, and more than that I do most of my work remotely (as in miles and miles away from the location) and it takes me quite some time to actually get there and see what's happening.
So, any ideas what might be happening? I belive that there might be some information in some of the logs, but as I am not an expert in Unix like operating systems I don't exactly know where to start from.
I downloaded the latest 10.4 server CD with the intention of running a small Ubuntu Enterprise Cloud. I am following the directions here: [URL] Ive got 2 laptops that are capable of the tasks assigned to them. Both have dual core Intel chips that are VT enabled, 4GB of RAM, 250GB hard drives. Ill use one ( "server" ) as the front end server running cc, clc, walrus and sc.The other one ( "node1" ) will be the only node controller on my little network. Ive also got another laptop as a client, running euca commands to make instances and what not.These three laptops are connected to a switch. server is 192.168.1.100, node1 is going to be 192.168.1.110, the client laptop is 192.168.1.120.
the server seems to install fine, I select Install Ubuntu Enterprise Cloud, use it as the Cluster, give the cluster a name and 10 IPs to assign, 192.168.1.150-192.168.1.160 After the server is done installing and reboots, I boot the node machine off the CD and again select Ubuntu Enterprise Cloud. It's at this point the install craps out, because it does not recognize a cloud computer on the network.
Indeed, as I go to the server I run
Code:
ps -aux | grep euca
and see nothing running. So I start the eucalyptus service, and run
Code:
sudo euca_conf --list-clusters
and nothing shows up. Ive done some googling, ran some more euca_conf commands, registering the cluster, enabling walrus, cloud and sc. I can access the web gui on the client laptop, then restart the node install on the node laptop. This time it does see the server as a cluster controller, but when it tries to fetch the preseed file, it seems to not know the cluster's IP, as the red box that complains about the lack of a preseed file lists the URL as [URL] ( or whatever the file is called, I dont have the error in front of me. )
I'm trying to get vsftpd running with both anonymous and local user access to the same folder. The directory I'm using is /tftp with the following permissions:
dr-srwxrwx 7 root root 12288 2009-08-14 15:54 tftp
My vsftpd.conf is this:
anonymous_enable=YES
local_enable=YES
write_enable=YES
[code]....
I set the default "ftp" user's home directory to /tftp (was /var/ftp).
OS: CentOS 5.3
vsftpd ver: vsftpd-2.0.5-12.el5_3.1
I installed vsftpd server in one of my servers using "yum install vsftpd" command. NFS server is running in the other server and mounted as "/data" in this FTP server. root in FTP server has also root authority in NFS server. All the files and sub-folders under "/data" in FTP server have 755 or 766 mode. Even I modified vsftpd setting to allow root login.
When I login as root to FTP server with FileZilla client, I can see all the file list in root home directory and move to /data directory. I can download any file in a local HDD but I can not download any file in /data directory.
So I want to get mount/umount option under right click services menu. I went to Dolphin -> Settings -> Configure Dolphin -> Services -> Download New Services and from there I installed KDE CDEmu Emulator and MountISO. But neither of them is showing up in actual context menu. Neither in Dolphin -> Settings -> Configure Dolphin -> Services for that matter. I tried to install them as normal user and as a root. I went to have a peak in /usr/share/kde4/services/ServiceMenus/ but they aren't there as well... It's just me or lots of things seems to be not quite working in 11.3?
View 9 Replies View Relatedpls tell me complete configuration of vsftpd server on redhat 5
View 1 Replies View RelatedI have just generated a new ssl key on my ftp server with the following command
Code:
I then put my new key onto my file server and attempted to connect to the FTP and it failed (this did work before with the default key).. I use curlFTPfs to mount the FTP directory locally as /ftpbackup, below is the command and the output.
Code:
Error connecting to ftp: server certificate not activated yet. As you see it gives an error about the certificate not being activated, I have looked this up and cant find a way to activate it.
Below is the contents of vsftpd.conf on the ftp server
Code:
I just installed Ubuntu server and wish to run an apache web server from it. I have that setup, with each user having their individual folder. (E.G) apache root /var/www/ LazerPhreaks folder is /var/www/LazerPhreak/ so their website would be www.mysite.com/LazerPhreak/) I wish to setup vsftp to let each user access their individual folder and upload website files via ftp. How should I go about this?
View 1 Replies View RelatedAfter giving it some thought, I decided to bail on proftpd, which I've used for some time.
I used
Quote:
But when I search around with locate proftpd, there seems to be a lot of "leftover" stuff. I'd like to remove all traces. Possible?
Now, I installed vsftpd:
Quote:
But when I try to start it, I get:
Quote:
I tried to locate its conf file, but I get this:
Quote:
Though I know it's at:
Quote:
Also, there does not seem to be a log file at /var/log/vsftpd.log or anywhere else.
how to configure vsftpd? i use rhel-5 server.
View 1 Replies View Related