After upgrade of 11.1 to 11.2 I noticed that none of services that was started in 11.1 at boot are starting now in 11.2. I check run-level of services with
Code:
chkconfig --list
When I start services manually everything is OK, but on restart they do not starting. Another weired thing is that my SuSEfirewall2 is filtering everything on input, nevertheless my previous configuration is still there, but ports are closed.
New Intel x64 system installed with Opensuse 11.1 (like the KDE 3.5 option) and has been running well until today. Booting stops at "starting jexec services". Even while booting under "failsafe" system halts at "starting jexec services". Unable to boot to command prompt to attempt repair. Ran "repair" option from install disc with no good results. Still will not boot past jexec services.
View 2 Replies View Relatedduring boot-up on my desktop, running openSUSE 11.4 with KDE 4.6.3, there are sometimes (not always) some failed services. Most of the time it is postfix and some other service. Today it is just mcelog. So when I switch to the first terminal by strg+alt+F1, I see that mcelog has failed.The system is running anyway, so I wonder if it is safe to turn them off? I would turn off postfix and mcelog. Do I harm the system with that? Would it boot again, after I have turned them off? Or is it recommended to let them stay as they are?As far as I understood, postfix is just a mailserver, which would be used, if I would run a mailserver on my own. But I donīt. I just read mails, via IMAP... But mcelog? Whats that?
View 4 Replies View RelatedWhen I shut down or restart my computer, I can see there are some errors related to failed services (about xinetd, I think, which is NOT enable). But it scroll too fast and I cannot note them. Sorry for the "newbie" question: how can I see the log of what happened ? (dmesg only gives log about kernel, if I'm not wrong.)
View 5 Replies View RelatedI downloaded the latest 10.4 server CD with the intention of running a small Ubuntu Enterprise Cloud. I am following the directions here: [URL] Ive got 2 laptops that are capable of the tasks assigned to them. Both have dual core Intel chips that are VT enabled, 4GB of RAM, 250GB hard drives. Ill use one ( "server" ) as the front end server running cc, clc, walrus and sc.The other one ( "node1" ) will be the only node controller on my little network. Ive also got another laptop as a client, running euca commands to make instances and what not.These three laptops are connected to a switch. server is 192.168.1.100, node1 is going to be 192.168.1.110, the client laptop is 192.168.1.120.
the server seems to install fine, I select Install Ubuntu Enterprise Cloud, use it as the Cluster, give the cluster a name and 10 IPs to assign, 192.168.1.150-192.168.1.160 After the server is done installing and reboots, I boot the node machine off the CD and again select Ubuntu Enterprise Cloud. It's at this point the install craps out, because it does not recognize a cloud computer on the network.
Indeed, as I go to the server I run
Code:
ps -aux | grep euca
and see nothing running. So I start the eucalyptus service, and run
Code:
sudo euca_conf --list-clusters
and nothing shows up. Ive done some googling, ran some more euca_conf commands, registering the cluster, enabling walrus, cloud and sc. I can access the web gui on the client laptop, then restart the node install on the node laptop. This time it does see the server as a cluster controller, but when it tries to fetch the preseed file, it seems to not know the cluster's IP, as the red box that complains about the lack of a preseed file lists the URL as [URL] ( or whatever the file is called, I dont have the error in front of me. )
I can see this phenomenon on 2 different systems running 11.3 .In simple mode and also in expert mode.
View 9 Replies View RelatedI have a little bit of a problem, I run openSUSE as a server on a Dell PowerEdge T610. I use it for sharing files in a local network and as a web server accessible through the public IP (configured through router DMZ). Also, I use Teamviewer for remote control in order to avoid some compatibility and network problems. Generally the computer runs flawless but from time to time, as about once in two weeks, all network related services except the Apache server which runs just fine, and is still accesible, crash. The Samba share can't be accessed anymore, the Teamviewer is also dead and the only way to put everything back in order is a restart. The thing is I don't know if an error occurs since the server hasn't got a monitor installed, and more than that I do most of my work remotely (as in miles and miles away from the location) and it takes me quite some time to actually get there and see what's happening.
So, any ideas what might be happening? I belive that there might be some information in some of the logs, but as I am not an expert in Unix like operating systems I don't exactly know where to start from.
I just got an android phone that I will want to interface with my linux box, which is currently behind a time warner cable modem. In the morning when I'm groggy, and my computer is off, I want to be able to kick the power button on, leave for work, and have it e-mail me the ip address I get from time warner, so I can check it on my phone.
I don't have the script written or anything yet, all I'm asking about here is how I would go about getting the script to run once I have it -- I can boot to a user using an automatic login and probably get away with it but that seems to be poor practice.
I'm really a stranger to the world of customizing a bootup.
Leaving the computer on all the time is a bad option even though my electric is included in rent, I live in a studio and I don't like the noise, and the environment and all. And manually doing mindless, automatic work is not the reason I have computer.
So I want to get mount/umount option under right click services menu. I went to Dolphin -> Settings -> Configure Dolphin -> Services -> Download New Services and from there I installed KDE CDEmu Emulator and MountISO. But neither of them is showing up in actual context menu. Neither in Dolphin -> Settings -> Configure Dolphin -> Services for that matter. I tried to install them as normal user and as a root. I went to have a peak in /usr/share/kde4/services/ServiceMenus/ but they aren't there as well... It's just me or lots of things seems to be not quite working in 11.3?
View 9 Replies View RelatedEarlier this evening I suddenly had hundreds of "Bug Buddy" windows start popping up, which seemed to be stuck in an infinite loop. I rebooted to find myself stuck in run-level 3, due to multiple daemons unable to boot.I cant copy & paste the logs as I have no way to transfer them over to this PC.
Failed services in runlevel 5: earlyxdm xdm avahi-daemon network-remotefs Of course when ever I run 'startx' neither my mouse or keyboard works.I've finally joined the forums, pitty It's because of errors.
For some reason today when I attempted to reboot my machine I am unable to start runlevel 5. The errors I am getting are the following:
Failed services in runlevel 5: vmware
Skipped services in runlevel 5: cifs nfs
I uninstalled Vmware in hopes that it would solve the problem. No dice.
how to debug this or has anyone seen this issue before.
After the GRUB prompt, my boot process does not advance to the login GUI. It kicks me out to the console view of the boot process and ends with a text prompt for logging in.
I get the following message just before the "Welcome to OpenSUSE 11.1" line:
Skipped services in runlevel 5: nfs
what's happening and how can I retrieve the login GUI?
i have a server which i dont know what was installed on it, it was sent for me to find out.
View 5 Replies View Relatedi know that there is already a command for it but it comes out with a lot of letters that makes it hard to find the services that are runningi'm talking about services like DNS, APACHE, DHCP, SAMBA, SSH etcis there a command that will list these services and related services that are running instead of showing a bunch of jumbled and lettered mess thats hard to comprehend
View 6 Replies View RelatedI am trying to run two different copies of vsFTPd service in the same server, one for IPv4 and the other one for IPv6. Because as I know that you cant run one vsFTPd server for IPv4 and IPv6 in the same time.
View 10 Replies View RelatedShould I have hal and/or dbus services running when my system doesn't have GUI? For example, in case of a mail/web server where I have console applications only on it.
View 4 Replies View RelatedI have installed release CentOS 5.5 w/ fetchmail services. I've already configured the /.fetchmailrc in the correct format that I've learned from topics and I've checked also the sedmail running status. When I invoke the #fetchmail command this often happens:
fetchmail: WARNING: : Running as root is discouraged.
2 messages for user1 at mx.mailserver.com.ca: (1 of 2) (4353 octets) .....flushed
I have configured two NIC 's One for the public IP and another for the local network, I've tried to use the two IP's in the POP3 and SMTP settings of Mozilla Thunderbird but still user1 can't get messages.
Is there any unix command to list services running on remote unix box.
View 6 Replies View RelatedI'd like to run a Tor relay, but am trying to understand the security implications. For some time I've run my torrent client in a VirtualBox virtual machine, which is run as a very non-prived user, bridges directly to The Internets, and writes to one directory on the host. My belief is this is about as secure as it can be, but am open to suggestion.If I run a relay in the VM it wouldn't be associated with my use of Tor as a client, which is fine since there is no technical need for them to be connected and it's desirable for security.I read that chroot jails can be broken, particularly when run as root, so I don't really trust that. Also studied a vserver, but it must share the network setup which doesn't strike me as isolated enough.
View 14 Replies View RelatedI have an OpenSuSE 11.1 in vmWare ESX and every other boot I can't access any running network services (ssh, webmin, qmail, mysql, ...) from outside. I just need to login, reboot and voila - network services are working.I gradually updated to 11.2 and 11.3 by following the wiki with success but this problem remained. So I reverted to snapshot of 11.1 and now I would like to identify and solve the problem here first.I also looked at /var/log/messages /var/log/boot.msg /var/log/lastlog but can't find anything usefull. I will now compare those files from the working and non-working boot but meanwhile someone already has an idea or experience what could be wrong?
View 3 Replies View RelatedI am baffled by fedora's feeble attempts to work with Samba. I have ran various versions of Fedora for the last few years, and sporadically, the Samba gui and samba itself have had such problems. My current problem in Fedora 11 (64bit) is that samba doesn't seem to be running correctly. It is allowing the hosting of shares, but it does not show that it is running in the services gui. It shows enabled, but when I attempt to change it by starting or stopping, nothing happens. The samba gui also shows that it launches but then never actually starts. I saw very similar problems with Fedora 9.
View 14 Replies View Related Last time I installed the ATI graphics driver on my PC, it was'nt working fine so I uninstalled that driver. I restarted the PC after uninstalling the driver but then, when PC boots and start running the services the screen just hangs and I don't get into the desktop.
I tried to run the xfs service using service xfs restart and also gdm service using service gdm restart, but in both the cases it shows that Unrecognized Service. So, I think it means that the package for xfs and gdm service is not available in my PC. Is that so?
I tried to get into the desktop by running startx but it gave the following error :-
Fatal Server Error: no screen found
consult the fedora project support at [URL] for help.
check the log file at "/var/log/Xorg.0.log" for additional information.
giving up
xinit: connection refused (errno 111): unable to connect to X server
xinit: no such process (errno 3): server error.
In my server the iptables and ip6tables services are not running. But still i am getting some iptables and ip6tables related alerts on my /var/log/messages. My technical leader told me that there might be some mis-configuration in iptables configuration file. But i didnt see anything wrong.
Quote:
Quote:
What does it mean "Jan 25 11:01:32 beteduibsrv3 avahi-daemon[3308]: Leaving mDNS multicast group on interface eth0.IPv6 with address fe80::226:b9ff:fefc:6ec4."
Howto show all services running/installed in the command line under Centos 5.6 Server?
View 6 Replies View RelatedI just installed the LAMP server on my system then rebooted, expecting the daemons HTTPD, MYSQLD, FTPD, etc. to start. When they didn't, I didn't panic I just attempted to run "sudo service start httpd". Surprise, suprise - "command not found". how do I start these daemons?
View 9 Replies View RelatedWe would like to use Kiwi LTSP to boot some old PCs straight in to a Windows terminal session. We have this working with RDesktop, but we would like to load balance the connections to our Citrix servers, which I don't believe you can do with RDesktop as it points to a single Windows server.
Is there a way to get LTSP to connect to published ICA applications on boot in a similar way to specifying screen07=rdesktop in lts.conf?
How can Vsftpd services & Xinetd.d services can be differentiated?
View 5 Replies View RelatedI spent a few minutes googling this, but I am not even sure what to search for. I suspect I'm looking at part of upstart, but it could also be sysvinit, plymouth or something else entirely. Every time I reboot, just between plymouth's splash screen and gdm loading, I am shown a list of services starting. The list shows the names of the services and [OK] if they started sucessfully or [fail] if they did not (only apport ever fails and only occasionally). I don't need or want to see this list. It also interrupts the transition from Grub to GDM (the background color should be the same shade of purple from grub all they way to the desktop, but this list is presented as ordinary terminal output: white text on black background)
View 4 Replies View RelatedI am running GNOME but want the option to use KDE. which package would I need to install KDE4 desktop.
View 3 Replies View RelatedI am completely new to OpenSuse and just installed it. However, I wanted things encrypted for work and chose LVM2 with password encryption upon installation.However, I didn't change any of the values.Now I see that my home partition is only about 30 Go and I cannot mount the oter 300GB that sit on another partition. When I try to mount it through nautilus I have to enter my password and then get :Unable to mount 307 GB LVM2 Physical Volume
View 9 Replies View Related