I'm using postfix and the always_bcc option to backup the emails which are passed through my MTA. The problem is that (with spamassassin and clamav running as virtual-smtp agents) I get three copies bcc-ed through to the backup account. Is there something I can do to stop the bcc from being carried out on the internal filters and only work on the final send or mailbox delivery?
View 8 Replies
I have a 64bit linux server with 5 virtual hosts on it. When someone fills out a contact form on one of the sites...I get 15-20 copies of the same email. At first I thought it was the kids clicking send multiple times because the first emails were coming from the children's ministry "Email The Cast" section. But then I started getting multiples from the adult sites too. All contact forms are set to come to me.
What's stranger is that my registration section for one of the sites uses the SAME php script (different file) to email me a notification that someone has registered but I only get 1 copy of that.
is there any HOWTO for configuring Webmin Postfix server with multiple postfix virtual hosts? Seems to be a tough challenge to set it up without any easy manual..
View 1 Replies View Relatedthe title says it all. im using CLI streamripper with this command:
Code: streamripper http://<stream IP address> -d ~/Music -z -o larger -T it keeps a copy of every song it rips in /incomplete then copies it to another folder once it's finished ripping (but keeps the copy in /incomplete). how do i get it to stop this and delete the copy in /incomplete once its finished moving it to the new folder?
i have setup mailrelay using postfix and relay email to exchange server. The problem is how can i relay email to multiple exchange server. For example: -
domain aa.bb.com relay to exchange server 10.10.10.10
domain 123.test.com relay to exchange server 192.168.10.5
I am setting up a Postfix MTA that will be only sending mail for 10 different domains. We have other servers that will be receiving the mail for the domains so I only need to set up for sending on Postfix.
What my issue is I am trying to configure Postfix so that when it sends mail the header shows what domain the mail came from and not the domain the Postfix server is set to. For example....
[URL]
When I send mail from domain2.com I want it to show in the header it was sent from domain2.com and not from domain1.com. What do I need to set in postfix so that this happens? Right now no matter what domain the mail is from the header always shows the server domain and I can't have that.
I set-up his mail server for him with Postfix but what he wants I have no idea how to do.
Essentially he wants it so that the mail gateway IP corresponds with the dedicated IP of the domain and I have no idea how to accomplish this.
I found some documentation on the web saying that the fix for this was to run multiple instances of Postfix which I tried doing but each time I try to start the second instance I get the error that postfix is already running.
There has to be an elegant way to make this happen, I really hate to tell a client something can't be done even though the concept is a bit pointless, IMHO. I am hoping I can get some feedback here on if this can be done and if it can the easiest way for me to accomplish doing it.
Here is some of the config files (example.com has been put in place of the actual domain names and the ip of 5.5.5.5 is in place of the actual IPs
Code:
[root@youronlinehosting ~]# cat /etc/postfix/transport
example.com smtp:5.5.5.5
example.com smtp:5.5.5.6
example.com smtp:5.5.5.7
[Code].....
When I select the "Open with...Other Application" context menu item I get a dialog box with multiple copies of the available programs. All of the offending program entries are Wine programs.How do I remove the extra programs from this list.this is a small problem but kind of annoying..
View 2 Replies View RelatedI recently inherited a server that I'm now looking after, and when browsing the running processes I came across a number of processes labelled:"/usr/local/apache-2.2.6/bin/.libs/lt-httpd -k start"
At any one time there are between 10 and 15 of them running.Googling the issue has been surprisingly unhelpful... can anybody even tell me what this process is, much less what sort of issue might result in multiple running copies? I'm running Debian Etch (release 4.0).
I am looking at setting up a multiple postfix SMTP servers for a single domain. Below is my requirement, I would appreciate if someone out there could guide me to achieve this using postfix..
1. Want to setup 2 postfix SMTP Server with 1 POP3 Server.
2. Server1 will host POP3 & SMTP services for domain "metallica.one".(IP: 1.1.1.1, MX: mx1.metallica.one)
3. Server2 will host only SMTP services for domain "metallica.one" (IP: 1.1.1.2, MX: mx2.metallica.one)
4. Server1 & Server2 will be used as load balancing for sending mails. (either manual settings in email client, or auto-loadbalancing is still preferred).
5. Mail received for domain metallica.one on Server2 should be pushed/forwarded/relayed to Server1 where POP3 services are running.
6. Outgoing mails for other domains from Server2 should be sent directly to the other-domain-recipients without relaying to Server1.
I have configured postfix to send/receive mail from/to for two domains we manage. [URL] and [URL] Most of the cases there is no issue sending out or receiving emails. However, a few users of domainY.com complained that their senders were not able to sent them email. after much investigation, we started thinking that the mailserver failed to send us email may the failing on doing a SMTP Banner issue.
Is there anyone who knows how to deal with this SMTP banner issue with multiple domain. We want different SMTP banner when doing EHLO on different server.
530 mail.domainX.com ESMTP MailEnable Service, Version: 1.981-- denied access at 11/16/10 10:51:21
530 mail.domainY.com ESMTP MailEnable Service, Version: 1.981-- denied access at 11/16/10 10:51:21
I'm running a server with two sites which both need to be able to send emails. Currently I have Postfix set up to send email via Google Apps. This works fine, but Google's servers ignore the From: address I specify and substitute the one I logged in with. Is there a way to make Postfix log into Google Apps with a different username based on what site the email is coming from? The server does not recieve any mail itself; Google recieves it and we have it set to forward it to the appropriate person's real email address. I'm only worried about sending mail.
(Postfix is not a requirement here, so if there's another mailer that can do this better, I'm open to ideas. However, sending email directly from the server isn't an option as it's a residential IP address and blocked by most of the big email providers.)
I am currently running a apache/postfix email service on my server. I am using aliases for two addresses for example:
trscookie@serverone.com
trscookie@secondserver.com
so the emails no matter which domain receives the email trscookie always will receive the email.
However I am unable to work out how to 'reverse' this process, for example.
If i was to go to secondserver.com/webmail I would like the emails to get sent from trscookie@secondserver.com however they are currently all coming from serverone.com. Is it possible to configure this so that it is sent from the correct domain?
Here is my main.cf:
queue_directory = /var/spool/postfix
command_directory = /usr/sbin
daemon_directory = /usr/libexec/postfix
mail_owner = postfix
[Code].....
I have a desktop and a laptop both running opensuse 11.2 with kde4. I have a samba share on my desktop. I tried opening a video on that share from my laptop (wirelessly) with Dolphin/SMPlayer. Here's what happened:
The video started downloading and the system tray notified me it would take 25 minutes. I thought that was too long (video is 350MB) so I checked the download speed and it was about 2 MB/s. It didn't make sense but I let it keep going.
25 minutes and 3.4 GB later, the download finally "finished"--according to the system tray. However, I checked my system monitor and something was still downloading at 2 MB/s. I confirmed with "df -h" that I was losing 2MB of space a second. At this point I only had about 700MB of disk space left so I rebooted (I wasn't sure how else to stop the download).
After digging around on / I found my video at /var/tmp/kdecache-londy/krun and it was 350MB. Then I found multiple copies of the same video, of varying sizes, on /tmp/kde-londy totalling 3GB.
I deleted the tmp files and tried it again. This time instead of clicking on the video to play it, I tried copying it to my laptop. Same thing started to happen but I didn't let it continue.
As a part of migration I am proposing different scenarios to my organization. One which is asked to prepare is to configure multiple mail servers to handle incoming and outgoing mails. Say I have -[URL], I need to have accept mails from [URL] and send mail from [URL].
View 1 Replies View RelatedI want to take a graphics file and make 10 copies of it to the same directory, each with 001, 002, or some such designation at the end of each file name so they have discrete files names. Is this possible using cp?
View 12 Replies View RelatedI'm running fedora 10 on a virtual machine. I'm trying to create a kernel so that I can use the imaging software FOG on multiple computer makes and models. I'm pretty new to linux so I'm sure I'm missing something I just need someone to point me in the right direction. I have installed the "Development Tools" and qt3-devel. When I run make xconfig or make menuconfig it errors out. The following is what I get...
make xconfig
[root@localhost linux-2.6.26.2]# make xconfig
scripts/kconfig/qconf arch/x86/kconfig
init/kconfig:514: can't open file "usr/Kconfig"
make[1]: *** [xconfig] Error 1
make: *** [xconfig] Error 2
[Code]...
Two exchange servers internally. One is setup for example.com (192.168.1.10) and the other is setup for example2.com (192.168.1.20) Both are behind a single public IP.
I want to use postfix to sit in front of the two exchange servers. Postfix will accept mail for both domains and relay to the appropriate server. I have postfix installed with only defaults at this point.
I am trying to run two different copies of vsFTPd service in the same server, one for IPv4 and the other one for IPv6. Because as I know that you cant run one vsFTPd server for IPv4 and IPv6 in the same time.
View 10 Replies View Relatedso i set out to change the default smtp port the server uses because my ISP blocks port 25 and i need the email to work in outlook. this morning i could receive email, but not send it. so i did some research and thought that i needed to edit the master.cf file in /etc/postfix/ by commenting out this line: smtp inet n - n - - smtpd -oand replace it with587 inet n - n - - smtpd (587 being the port i want to use)somewhere along the lines postfix server stopped running and now i cannot get it to start.if i try using SSH it crashes immediately and if i restart it in simple control panel nothing happens
View 7 Replies View RelatedI recently moved over user from an old box running postfix(v 2.0.16) over to rhel 6 running postfix (v mail_version = 2.6.6). ive tried to make sure all the files are of correct permissions and that the main.cf file is configured corectly. However there is something wrong as when i run postfix: service postfix server i get no error but when checking the status:service postfix status i get: master dead but pid file exists Looking into /var/log/mailog i find this line being the issue:
Feb 25 16:24:39 puny1 postfix/master[3517]: fatal: fifo_listen: create fifo public/pickup: Permission denied
I gather this is a file permission issue and ive tried to make sure the public folder in /var/spool/postfix is correctly set but still no avail.
As an example, I have two servers, sm-i222 and fileserv. sm-i222 is a Win2k3 system running cygwin. fileserv is a linux box running RHEL 4.7. sm-i222 maps /cygdrive/c to the c: drive and /cygdrive/d maps to the d: drive(actually a single 4TB RAID). from the sm-i222 server /cygdrive/c I call a small script from the crontab. The internal IP for fileserv is 10.0.0.7. See below.
cd /cygdrive/d/fileserv/home
rm -rf /cygdrive/d/fileserv/home/*
rsync -avz -e 'ssh -c blowfish' root@10.0.0.7:/home/* .
These three lines perform well in that they make a full transfer of the fileserv:/home/ directory on fileserv to the appropriate place on sm-i222 using rsync. I use rsync instead of scp because I have to traverse subdirectories and symbolic links in the /home/... filesystem on fileserv. What I'm looking to do is use rsync to do an incremental transfer/backup of only the files that have changed since the last full backup. I'll manage the times I do this manually or in crontab. A colleague says this is do-able, but not how. Rsync.org says this is do-able but not how. Cygwin says this is do-able... see rsync.org. I believe what I'm looking for is a single rsync line like I have above that only transfers the changed files on fileserv to sm-i222.
Is there an open source application that can download e-mails from a generic POP mail server, keep a copy of the mails locally and then deliver copies to multiple accounts on a LAN? I have a friend who uses a group e-mail account, and more than one person is always hooked onto that account. The problem is they cannot leave e-mail on the server, as it eats out their webhosting space, but if someone downloads a message in Outlook, the other users do not see that message.
View 1 Replies View RelatedI have Postfix + Unix Accounts + Virtual Domains. I have a bunch of domains hosted on my machine, let's call them [URL] [URL] and [URL]... etc Until know, domain2.com, domain3.com were mapped in virtual domains to [URL] So this is how /etc/postfix/virtual looks like:
[URL]
Like I said, all mail accounts are unix accounts, so, if for example I have the user "paul" this user will receive e-mail for ALL DOMAINS. [URL]But as it turns out, I now need a COMPLETELY ISOLATED domain... let's call it [URL]. So If I create a new user, let's call it "steve" I want steve to receive e-mail ONLY on [URL] and not on all others.
I would have to redo the whole thing from the beginning. I'd have to comment out the $mydestination parameter in the main.cf file and start using only virtual domains. So if I have the following users: paul, steve, sally, megan, jenny and I want paul and steve to ONLY receive mail for domain1.com, sally and megan to receive mail for domain2.com and jenny to receive mail for domainX.com, my /etc/postfix/virtual file would have to look like this:
[URL]
I'd have to create the unix account and then start modifying the /etc/postfix/virtual file.
I've sifted through hundreds of Google results, but I cannot seem to find a tutorial or how-to for installing and configuring Postfix on Red Hat Enterprise for use with multiple domains. We have a web server serving four websites so far. Each of these websites has their own domain that they'll require email for.
View 3 Replies View RelatedHere is what i do: make clean make makefiles CCARGS='-DEF_CONFIG_DIR="/opt/product/postfix-2.6.5/etc"
-DEF_COMMAND_DIR="/opt/product/postfix-2.6.5"
-DEF_DAEMON_DIR="/opt/product/postfix-2.6.5/libexec"
-DEF_MAILQ_PATH="/opt/product/postfix-2.6.5/bin/mailq"
-DEF_DATA_DIR="/opt/product/postfix-2.6.5/lib"
-DEF_NEWALIAS_DIR="/opt/product/postfix-2.6.5/bin/newaliases"
[Code]...
make install then i got this error: postfix: fatal: chdir(/usr/libexec/postfix): No such file or directory make: *** [install] Error 1 I don't understand why it's checking the usr/libexec folder for the daemons although I've set the folder to /opt/product/postfix-2.6.5/libexec in the makefile. Here is also the cat of my makedefs.out:
[Code]....
[Code]...
I think I can eliminate Media Companion as the problem since all other samba servers work with it.
I want to trouble shoot this but don't even know where to start. How do I figure out what makes OPENWRT samba server different from the other 100% working FREENAS and PC-01 Servers?
How would you go about trouble shooting this?
I'm looking at setting up a couple automated systems: Here are a few examples:
* Internal accounting system to download and process emails
* Public web server to visit
I could put each system on its own separate box -- for example, it's generally good practice to separate anything that external users have access to (such as a webserver) from internal processes such as accounting. Now, rather than dishing out the money for two separate servers, could I get away with just installing new instances of VMWare on the same box for each system?
To give you an idea, these are not large scale computationally sensitive systems. The accounting one is simply downloading and tallying emails, and the latter is just a webserver with maybe 5 hits per day on a good day. I could definitely pick up a new box for say $50, but I wanted to know the general practice of using VMWare on the same box versus two separate boxes.
I have an email setup where all of the emails from our email host is downloaded to our Linux server using Fetchmail. Then some of the incoming emails are sent to an MS exchange server (server1.domain.com) using Postfix. What i want to do is to send a copy of all emails to Another server (server2.domain.com) for redundancy.Can postfix be configured to send copies out to both?
View 1 Replies View Relatedhow can I best transfer my mails that are sitting on my old exim server to my new postfix server?
View 1 Replies View Related
