Should I have hal and/or dbus services running when my system doesn't have GUI? For example, in case of a mail/web server where I have console applications only on it.
View 4 Repliesi'm having a little issue with a small script i'm working on. It's a bash script that, amongst other things, checks the current playing song in Rhythmbox with "rhythmbox-client --print-playing". Now the thing is that if I run the script by hand it works perfectly, but when it's run by cron this part gives the following error:
Code:
(rhythmbox-client:9848): Rhythmbox-WARNING **: /bin/dbus-launch terminated abnormally with the following error: Autolaunch error: X11 initialization failed.It's running on my own cron (crontab -e) set to my user.
I am baffled by fedora's feeble attempts to work with Samba. I have ran various versions of Fedora for the last few years, and sporadically, the Samba gui and samba itself have had such problems. My current problem in Fedora 11 (64bit) is that samba doesn't seem to be running correctly. It is allowing the hosting of shares, but it does not show that it is running in the services gui. It shows enabled, but when I attempt to change it by starting or stopping, nothing happens. The samba gui also shows that it launches but then never actually starts. I saw very similar problems with Fedora 9.
View 14 Replies View Related Last time I installed the ATI graphics driver on my PC, it was'nt working fine so I uninstalled that driver. I restarted the PC after uninstalling the driver but then, when PC boots and start running the services the screen just hangs and I don't get into the desktop.
I tried to run the xfs service using service xfs restart and also gdm service using service gdm restart, but in both the cases it shows that Unrecognized Service. So, I think it means that the package for xfs and gdm service is not available in my PC. Is that so?
I tried to get into the desktop by running startx but it gave the following error :-
Fatal Server Error: no screen found
consult the fedora project support at [URL] for help.
check the log file at "/var/log/Xorg.0.log" for additional information.
giving up
xinit: connection refused (errno 111): unable to connect to X server
xinit: no such process (errno 3): server error.
when I connect my iphone (3GS, 4.3.3) to Fedora 15 it gives me this error: Unable to mount iphone
DBus error org.freedesktop.DBus.Error.NoReply: Message did not receive a reply (timeout by message bus). The weird thing: after looking in var/log/messages it appears that it is trying to be used by NetworkManager. And when I lookin NM, i can see iPhone as an ethernet device (cable unplugged).
I'm curious as to why system-config-services is not installed by default in Fedora 13. IMO it's a pretty important tool for managing a system. I checked the release notes but could not find any mention of its removal.
View 2 Replies View RelatedI need to initialize the ssh,httpd.vsftpd when the system is initialized, how can i do that?
View 6 Replies View RelatedI can see this phenomenon on 2 different systems running 11.3 .In simple mode and also in expert mode.
View 9 Replies View RelatedHas anyone tried updating dbus in factory up to level 1.4 under openSuSE 11.3 x86_64 and continue to run KDE 4.4.4 Stable? Just wondering if it causes any issues or if it forces you to go to KDE 4.5.1 Factory. I've tried updating to 4.5.1 without, other thread, and the suggestion was to update dbus to 1.4 to correct speed issues.
View 1 Replies View RelatedAfter a recent update of fedora 15 (2 days ago) I lost my networkmanager icon in top panel completely. Then I check network manager version & found it's version 0.8.0.9997-5.git20110702. After this update I can't connect to internet by any means either via wired or wireless connection. When I try to open Network option from system settings it giving me an error: System network services are not compatible with this version.
I also try to open network-connection-editor by pressing Alt+F2 & typing:
nm-connection-editor
But it not works as well, I can't see any existing network connection there, moreover I can't even manually add any type of network connection there including mobile broadband! Then I do some googling from my windows machine & found this thread- [URL]. According to this thread I try to do downgrading of following 3 packages-
Code:
networkmanager
networkmanager-glib
networkmanager-gnome
But I can't downgrade via yumex as there's no internt connection in fedora. so i do a trick of myself. yumex suggests me to downgrade them to previous version 0.8.0.999-2.git20110509
so i manually download those 3 packages from my windows machine & copy them to /var/cache/yum/... folder. After that I do downgrading via yumex. But even after downgrading problem isn't solved. Same things happening still. No networkmanager icon in top panel & no internet
at present, there's no internet connection in my fedora 15 machine & I'm writing this post from my windows machine.
Moreover when I give this command in terminal:
Code:
sudo service network start
it giving me FAILED status.
I need to check and see that dbus, udisks and gvfs are running correctly, how can I check them?
I'm running only LXDE on a custom install of Lucid I did and I can't get my usb hard drive to automount properly and I was told by an LXDE developer that I need to check and make sure these three are running ok.
I can no longer start cups with system-config-services (System->Administration->Services). I am prompted for the root password but it is not accepted. I can start cups in a terminal with
Code:
$ su
Password:
[code]....
do have installed glib and dbus and can find them manually , /usr/include/glib-2.0/glib.h , but while comipling applicaiton it gives following error messages.
/usr/include/libosso.h:32:18: error: glib.h: No such file or directory
/usr/include/libosso.h:38:23: error: dbus/dbus.h: No such file or directory
/usr/include/libosso.h:39:32: error: dbus/dbus-protocol.h: No such file or directory
i have a server which i dont know what was installed on it, it was sent for me to find out.
View 5 Replies View RelatedAfter upgrade of 11.1 to 11.2 I noticed that none of services that was started in 11.1 at boot are starting now in 11.2. I check run-level of services with
Code:
chkconfig --list
When I start services manually everything is OK, but on restart they do not starting. Another weired thing is that my SuSEfirewall2 is filtering everything on input, nevertheless my previous configuration is still there, but ports are closed.
i know that there is already a command for it but it comes out with a lot of letters that makes it hard to find the services that are runningi'm talking about services like DNS, APACHE, DHCP, SAMBA, SSH etcis there a command that will list these services and related services that are running instead of showing a bunch of jumbled and lettered mess thats hard to comprehend
View 6 Replies View RelatedI am trying to run two different copies of vsFTPd service in the same server, one for IPv4 and the other one for IPv6. Because as I know that you cant run one vsFTPd server for IPv4 and IPv6 in the same time.
View 10 Replies View RelatedWhen I install a commercial audio into the CDROM drive I get th following: Unable to mount Audio Disc DBus error org.freedesktop.DBus.Error.InvalidArgs: Mountpoint Already registered
View 1 Replies View RelatedI have installed release CentOS 5.5 w/ fetchmail services. I've already configured the /.fetchmailrc in the correct format that I've learned from topics and I've checked also the sedmail running status. When I invoke the #fetchmail command this often happens:
fetchmail: WARNING: : Running as root is discouraged.
2 messages for user1 at mx.mailserver.com.ca: (1 of 2) (4353 octets) .....flushed
I have configured two NIC 's One for the public IP and another for the local network, I've tried to use the two IP's in the POP3 and SMTP settings of Mozilla Thunderbird but still user1 can't get messages.
Is there any unix command to list services running on remote unix box.
View 6 Replies View RelatedI'd like to run a Tor relay, but am trying to understand the security implications. For some time I've run my torrent client in a VirtualBox virtual machine, which is run as a very non-prived user, bridges directly to The Internets, and writes to one directory on the host. My belief is this is about as secure as it can be, but am open to suggestion.If I run a relay in the VM it wouldn't be associated with my use of Tor as a client, which is fine since there is no technical need for them to be connected and it's desirable for security.I read that chroot jails can be broken, particularly when run as root, so I don't really trust that. Also studied a vserver, but it must share the network setup which doesn't strike me as isolated enough.
View 14 Replies View RelatedI am running a linux VPS with ubuntu 8.04. My VPS provider doesn't have domain services so i have to host my own domain. I am using bind9 and cant "catch or grab or whatever you want to call it", my domain name. I used go daddy to create my domain and I created my own name servers with the ip's I use on my VPS. I have been trying to go at this all week, all i need to do is get my domain running and then my site will be good to go cause I already have everything else running smoothe it seems. any help at all is very appreciated. I dont know what kind of info you need from me so ask whatever you need to. I am going to use a fake domain and ip in on here just to protect myself.Also I have tried many tutorials and have been searching around the net and forums with no luck.
View 3 Replies View RelatedI have a little bit of a problem, I run openSUSE as a server on a Dell PowerEdge T610. I use it for sharing files in a local network and as a web server accessible through the public IP (configured through router DMZ). Also, I use Teamviewer for remote control in order to avoid some compatibility and network problems. Generally the computer runs flawless but from time to time, as about once in two weeks, all network related services except the Apache server which runs just fine, and is still accesible, crash. The Samba share can't be accessed anymore, the Teamviewer is also dead and the only way to put everything back in order is a restart. The thing is I don't know if an error occurs since the server hasn't got a monitor installed, and more than that I do most of my work remotely (as in miles and miles away from the location) and it takes me quite some time to actually get there and see what's happening.
So, any ideas what might be happening? I belive that there might be some information in some of the logs, but as I am not an expert in Unix like operating systems I don't exactly know where to start from.
I downloaded the latest 10.4 server CD with the intention of running a small Ubuntu Enterprise Cloud. I am following the directions here: [URL] Ive got 2 laptops that are capable of the tasks assigned to them. Both have dual core Intel chips that are VT enabled, 4GB of RAM, 250GB hard drives. Ill use one ( "server" ) as the front end server running cc, clc, walrus and sc.The other one ( "node1" ) will be the only node controller on my little network. Ive also got another laptop as a client, running euca commands to make instances and what not.These three laptops are connected to a switch. server is 192.168.1.100, node1 is going to be 192.168.1.110, the client laptop is 192.168.1.120.
the server seems to install fine, I select Install Ubuntu Enterprise Cloud, use it as the Cluster, give the cluster a name and 10 IPs to assign, 192.168.1.150-192.168.1.160 After the server is done installing and reboots, I boot the node machine off the CD and again select Ubuntu Enterprise Cloud. It's at this point the install craps out, because it does not recognize a cloud computer on the network.
Indeed, as I go to the server I run
Code:
ps -aux | grep euca
and see nothing running. So I start the eucalyptus service, and run
Code:
sudo euca_conf --list-clusters
and nothing shows up. Ive done some googling, ran some more euca_conf commands, registering the cluster, enabling walrus, cloud and sc. I can access the web gui on the client laptop, then restart the node install on the node laptop. This time it does see the server as a cluster controller, but when it tries to fetch the preseed file, it seems to not know the cluster's IP, as the red box that complains about the lack of a preseed file lists the URL as [URL] ( or whatever the file is called, I dont have the error in front of me. )
In my server the iptables and ip6tables services are not running. But still i am getting some iptables and ip6tables related alerts on my /var/log/messages. My technical leader told me that there might be some mis-configuration in iptables configuration file. But i didnt see anything wrong.
Quote:
Quote:
What does it mean "Jan 25 11:01:32 beteduibsrv3 avahi-daemon[3308]: Leaving mDNS multicast group on interface eth0.IPv6 with address fe80::226:b9ff:fefc:6ec4."
I cannot boot my 9.10 system as of this morning. I see these messages:
insserv: warning: script 'dbus' missing LSB tags and overrides
insserv: warning: script 'gdm' missing LSB tags and overrides
insserv: warning: script 'K20acpi-support' missing LSB tags and overrides
insserv: warning: script 's99webmin' missing LSB tags and overrides
/sbin/insserv failed, exit code 1
I then hear 2 or 3 faint clicks and I get a blank screen, with 2 faint lines at the top. I have been searching and trying to figure this out, but to no avail.
Howto show all services running/installed in the command line under Centos 5.6 Server?
View 6 Replies View RelatedI'm not sure what when wrong since I have a few DVDs and they all play well in my normal DVD player, I later attempt to mount it in my Ubuntu 8.10 I'm presented with the following message:
DBus error org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
May I know what does this really mean?Is there something in my computer that require a fix?
installed skype, shows in apps-internet-skype , but hwen i want to start it, it doesn't do anything. does not show in sysmonitor as running, or at all uninstalled and re-installed, still no luck anyone who got it working.
View 3 Replies View RelatedI presume there is something in the JWM window manager - or Puppy Linux Lupu 5.01 itself that is conflicting with the normal loading of GMPLAYER....
I would like to know how to troubleshoot, and fix this problem if possible (even a workaround would be great).