Server :: How To Configure The Vsftpd
Feb 13, 2010how to configure vsftpd? i use rhel-5 server.
View 1 Replies
ADVERTISEMENT
Server :: Configure Vsftpd Server With User Name And Password
Aug 3, 2010pls tell me complete configuration of vsftpd server on redhat 5
View 1 Replies View RelatedUbuntu Servers :: From Filezilla FTP Server To Vsftpd - Configure?
Feb 21, 2011I have used for a long time Filezilla FTP Server on a windows server, for multiple users in my company around the country.Lately the windows box died and I said let's try ubuntu server 9.10. I configured to my best as a Samba file server and from a speed point of view it works even faster than the Winbox.Now getting to FTP setup, I had the following problem when setting vsftpd.How can I enable more directories for the user, each with its own rights. By example, in Filezilla I had two folders for each user: one was a specific folder in which he could also write, and the other was read-only. They were setup with aliases, so that when user login, he sees one continous list of folders.I tried with symlink, but couldn't do it. Also I searched through the man page but also did not find something specific for this task I would appreciate any help you guys could give me in order to solve this issue, using the best practice for vsftpd. Also note that I am open to other FTP servers as well.
View 1 Replies View RelatedGeneral :: Configure Vsftpd Server With File Zilla?
May 31, 2011i want to configure vsftpd server with file zilla in ubunto environment..
View 3 Replies View RelatedServer :: Configure Vsftpd With Virtual And System User?
Jul 6, 2011Can some one help me to configure vsftpd with Virtual and System user
View 37 Replies View RelatedServer :: Starting Vsftpd For Vsftpd: 500 OOPS: SSL: Cannot Load RSA Certificate?
Feb 10, 2011Any clue? I'm using the same key for root login and it works fine (also works fine for SFTP but i hate using that cause its extremely slow)
View 2 Replies View RelatedSoftware :: Can't Configure Virtual Users In VSFTPd?
Mar 27, 2011Ubuntu 10.04 32 bitsvsftpd 2.3.4 installed from sources
Code:
# cat vsftpd.conf
listen=YES
[code]...
Ubuntu Networking :: Can't Configure Virtual Users In VSFTPd?
Mar 27, 2011Ubuntu 10.04 32 bitsvsftpd 2.3.4 installed from sources
Code:
# cat vsftpd.conf
listen=YES
[code]...
CentOS 5 Server :: Vsftpd - Working With NFS Server As Home Directory
Aug 31, 2009OS: CentOS 5.3
vsftpd ver: vsftpd-2.0.5-12.el5_3.1
I installed vsftpd server in one of my servers using "yum install vsftpd" command. NFS server is running in the other server and mounted as "/data" in this FTP server. root in FTP server has also root authority in NFS server. All the files and sub-folders under "/data" in FTP server have 755 or 766 mode. Even I modified vsftpd setting to allow root login.
When I login as root to FTP server with FileZilla client, I can see all the file list in root home directory and move to /data directory. I can download any file in a local HDD but I can not download any file in /data directory.
Server :: Ssl Key And Vsftpd - Server Certificate Not Activated Yet
Apr 14, 2010I have just generated a new ssl key on my ftp server with the following command
Code:
I then put my new key onto my file server and attempted to connect to the FTP and it failed (this did work before with the default key).. I use curlFTPfs to mount the FTP directory locally as /ftpbackup, below is the command and the output.
Code:
Error connecting to ftp: server certificate not activated yet. As you see it gives an error about the certificate not being activated, I have looked this up and cant find a way to activate it.
Below is the contents of vsftpd.conf on the ftp server
Code:
Server :: How To Setup Vsftpd
Jan 18, 2010I just installed Ubuntu server and wish to run an apache web server from it. I have that setup, with each user having their individual folder. (E.G) apache root /var/www/ LazerPhreaks folder is /var/www/LazerPhreak/ so their website would be www.mysite.com/LazerPhreak/) I wish to setup vsftp to let each user access their individual folder and upload website files via ftp. How should I go about this?
View 1 Replies View RelatedServer :: Installing Vsftpd With Yum
Mar 13, 2010After giving it some thought, I decided to bail on proftpd, which I've used for some time.
I used
Quote:
But when I search around with locate proftpd, there seems to be a lot of "leftover" stuff. I'd like to remove all traces. Possible?
Now, I installed vsftpd:
Quote:
But when I try to start it, I get:
Quote:
I tried to locate its conf file, but I get this:
Quote:
Though I know it's at:
Quote:
Also, there does not seem to be a log file at /var/log/vsftpd.log or anywhere else.
Server :: Vsftpd SSH Add User ?
Sep 5, 2010I'm trying to add users.
(Translation: gebruiker = user)
I did this:
I want that only gebruiker1 can be in his map home/gebruikers/gebruiker1
But now he can see the whole server dir.
Server :: Vsftpd Will Now Allow Upload?
Mar 31, 2010I have a vsftpd server configured and I cannot upload using anonymous account, I've trawled the net have have exhausted my search for answers. Here is my vsftpd.conf file
Code:
# Example config file /etc/vsftpd/vsftpd.conf
#
# The default compiled in settings are fairly paranoid. This sample file
# loosens things up a bit, to make the ftp daemon more usable.
# Please see vsftpd.conf.5 for all compiled in defaults.
[Code]...
General :: Backing Up Vsftpd Server?
Mar 8, 2011Does someone know of a solid article on what files to back up to restore a vsftpd server onto another server?
Right now i'm backing up the ftp directory structure with all the files in it, but no configs, users, etc
General :: Setup Vsftpd For FTP On Server?
Mar 16, 2010I've setup vsftpd for my FTP on my server, I edited the vsftpd.conf to allow me user to gain access to their home directory, It doesn't seem to let me in, I'm getting the error
Quote:
530 This FTP server is anonymous only.
this is set at yes
I've set it to NO and I get
Quote:
500 OOPS: vsftpd: both local and anonymous access disabled!
I don't quiet under whats going on, I followed this tutorial [URL]
In the end I want to be able to upload files to the www directory for my web site.
Server :: Which Is The Best Vsftpd Or Proftpd Or Pureftpd
Jun 18, 2011which is the best vsftpd or Proftpd or Pureftpd ?
which is high secure and reliable ?
Pureftpd or Proftpd can install on Centos ?
Server :: VSFTPD - 553 Could Not Create File
Dec 18, 2010I am trying to use cron and FTP to backup files regularly from my main server to a backup server. The backup server was a "bare bones" setup with no control panel or even FTP. It is running CentOS 5.3.
I installed VSFTPD which appears to be running OK and I can connect via FTP from my other server, but when I try to run my backup script (it uses mput) I get a "553 Could not create file" error.
Some relevant info:
The user I have created for this is "ftz" with home directory /home/ftz/
Running ls -l shows: drwxrwxrwx 3 ftz ftz 4096 Dec 18 07:46 ftz
so permissions and directory ownership don't seem to be the problem.
vsftpd.conf was left in default form:
Code:
# Example config file /etc/vsftpd/vsftpd.conf
#
# The default compiled in settings are fairly paranoid. This sample file
# loosens things up a bit, to make the ftp daemon more usable.
# Please see vsftpd.conf.5 for all compiled in defaults.
#
[code].....
Server :: Vsftpd Access Allow For Anonymous?
Sep 4, 2010vsftpd is working fine in my network with anonymous user but i need to access that from out-side all the setting is done on the router. I am getting page to access ftp form out-side but only for ftp users not anonymous user how i will give permeation to access ftp to anonymous user ?
View 26 Replies View RelatedServer :: Vsftpd Doesn't Work
Jul 25, 2011My ftp server runs vsftp. The ftp passive ports stopped working while iptables is running, so users can't ls their dirs. I know that you need to load the modules of ip_conntrack and ip_conntrack_ftp, the problem is when I modprobe ip_conntrack I get the error: FATAL: Module ip_conntract_ftp not found. No that is not a typo. ip_conntract_ftp? Am I missing something?
View 2 Replies View RelatedServer :: VSFTPD Login Failed ?
Aug 31, 2010I m trying to use VSFTPD, but it is failed to login of local users, i did tried to login on localhost, it become login successfully on localhost, but taking much delay to login. and login become fail from remote computer. this is text of "vsftpd.conf"
View 29 Replies View RelatedServer :: How To Setup Logs In Vsftpd
Oct 20, 2010how to setup logs in Vsftpd? I have default configuration in CentOS but its not log`ing
View 1 Replies View RelatedServer :: Vsftpd Not Working For Root?
Apr 11, 2010I just got vsftpd working, well, sort of. I can't login using my existing account "root" Error message: 530 Permission denied. But if I create another account it works. How can I enable it for root?
View 2 Replies View RelatedServer :: Vsftpd Won't Start On Red Hat Enterprise 5.7
Aug 16, 2011I am using red hat enterprise 5.7 OS and the problem is that vsftpd won't start. When issuing Service vsftpd start it comes up with failed. I am using the default RPM to install it, also using the default vsftpd.conf
View 8 Replies View RelatedCentOS 5 Server :: How To Log Vsftpd To Syslog
Jan 11, 2009I open "man vsftpd.conf", it says syslog_enable If enabled, then any log output which would have gone o /var/log/vsftpd.log goes to the system log instead. Logging is done under the FTPD facility. Default: NO So I add "syslog_enable=YES" to the /etc/vsftpd.conf, and add "ftpd.* /var/log/ftplog" into /etc/syslog.conf. But there is no log infomation in the ftplog file.
View 7 Replies View RelatedCentOS 5 Server :: Connecting To Vsftpd Using TLS?
Dec 20, 2009I'm still learning my way around CentOS and linux in general... Using CentOS 5.4
BUT, I used the scripts from HowTo/Chroot Vsftpd and it did not work with the non-TLS script config, but the with TSL worked great. I wasn't sure where to put the vsftpd_virtualuser_config.tpl file but I copied it over when the script failed to find it... to where it was looking.
So I think it's working but my question is, TLS doesn't use port 21 but the script defaults to that port. I'm using FileZilla from an XP machine at work and I'm forwarding all the ports given in the HowTo. So I'm forcing the client to use TLS on port 21 but it hangs on the connection. If I use non TLS I get in but it tells me it requires TSL. I've had no luck with vsftpd in the past and this is my next attempt.
Quote:anon_world_readable_only=NO
anonymous_enable=NO
chroot_local_user=YES
guest_enable=NO
[Code]....
Ubuntu Servers :: VSFTPD Server Acces From WAN?
Feb 18, 2011I made a "test" server recently, put a samba + apache + vsftp server on it. The first 2 work but the VSFTP server is troubling me. On my lan it works. but on a wan: My ISP blocks port 21 so I changed it to 2200, my friend tried to connect earlier (With "ftp://myip:2200") and he had to type in a name and password, he did that (I made him an account)he got 425 failed to establish connection. Now I Re-installed vsftpd again, did the exact same thing and now it just wouldn't connect. saying the webpage can't be found. Question 1: What should I do to let a user acces from outside of my LAN? I think it's because of passive mode: but I have no idea what ports I should open for passive mode? My ftp port is 2200.
FileZilla tells me.
Entering passive mode
Command: List
And than that it can't find directory's
Networking :: Launch A Webpage With Vsftpd Ftp Server?
Apr 14, 2011I'm kinda new to all of this so I believe there's a simple solution for what I need I just don't know how it's done.
So I've configured a vsftpd, ftp server and enabled the anonymous user, therefore when I do
Code:
ftp://my_location.com
a directory like view is displayed in my web browser, corresponding to /srv/ftp where the files for the anonymous account are kept. Now I've made a little web page and I've copied it there, and can be executed running main.html so the address to access the web page would be
Code:
ftp://my_location.com/main.html
My problem is that I don't want anybody to have the possibility to see the directory like display so I'm wondering if when someone does ftp://my_location.com can't this be redirected so it will do ftp://my_location.com/main.html instead?, making the display of files and directories impossible from the ftp://my_location.com
Server :: Client Certificates In Vsftpd: Require_cert Is Ignored?
Jun 28, 2009I have vsftpd running as FTP server on Ubuntu 9.04 jaunty. Login works correctly with password for local users (those with an login account on the server) and without password for anonymous.
I want to further tighten security by requiring local users to provide a client certificate. But even if I include "require_cert=YES" and "validate_cert=YES" in etc/vsftpd.conf, clients without certificate are allowed to login; require_cert seems to be simply ignored.
Server :: Ftp: Vsftpd With Firewall - External Ip Is Blocked Out With X
Jan 3, 2010i have a server running vsftpd, and when i connect to it from the server itself using my externel ip address, everything checks ok, and i can browse files. but when i try to do the same on a windows computer on my network, this is what happens: [my externel ip is blocked out with x]
[Code]....
now mind you, my linux server is running from port forwarding from my router, which is connected to the main computer, and i have ssh and squid running as well. not sure if those two have any affect on the service. i think this is a problem with the firewall, because i have read somewhere that multiple ports need to be open for a passive ftp to work.