OpenSUSE Network :: Samba And Other Services Hang While Apache Keeps Running?
Aug 26, 2011
I have a little bit of a problem, I run openSUSE as a server on a Dell PowerEdge T610. I use it for sharing files in a local network and as a web server accessible through the public IP (configured through router DMZ). Also, I use Teamviewer for remote control in order to avoid some compatibility and network problems. Generally the computer runs flawless but from time to time, as about once in two weeks, all network related services except the Apache server which runs just fine, and is still accesible, crash. The Samba share can't be accessed anymore, the Teamviewer is also dead and the only way to put everything back in order is a restart. The thing is I don't know if an error occurs since the server hasn't got a monitor installed, and more than that I do most of my work remotely (as in miles and miles away from the location) and it takes me quite some time to actually get there and see what's happening.
So, any ideas what might be happening? I belive that there might be some information in some of the logs, but as I am not an expert in Unix like operating systems I don't exactly know where to start from.
View 2 Replies
ADVERTISEMENT
Jun 16, 2010
I have both apache and tomcat services running, both in their standard doors (tomcat 8080, httpd 80). I need to setup tomcat to run on door 80 instead of httpd. I changed httpd door with success to 8180. Now I want to change tomcat6 door to 80, and I did that by editing server.xml config file of tomcat. After restarting tomcat, the system tells me it's ok, but I can see that it's not running on 80, nor at any other door. A simple nmap search confirm that. What should I do to have tomcat running in door 80?
View 5 Replies
View Related
Nov 13, 2009
I am baffled by fedora's feeble attempts to work with Samba. I have ran various versions of Fedora for the last few years, and sporadically, the Samba gui and samba itself have had such problems. My current problem in Fedora 11 (64bit) is that samba doesn't seem to be running correctly. It is allowing the hosting of shares, but it does not show that it is running in the services gui. It shows enabled, but when I attempt to change it by starting or stopping, nothing happens. The samba gui also shows that it launches but then never actually starts. I saw very similar problems with Fedora 9.
View 14 Replies
View Related
May 23, 2010
How do you configure the firewall to allow external web access (it's a LAMP server) and internal access for samba shares ?
View 6 Replies
View Related
Feb 19, 2010
After upgrade of 11.1 to 11.2 I noticed that none of services that was started in 11.1 at boot are starting now in 11.2. I check run-level of services with
Code:
chkconfig --list
When I start services manually everything is OK, but on restart they do not starting. Another weired thing is that my SuSEfirewall2 is filtering everything on input, nevertheless my previous configuration is still there, but ports are closed.
View 9 Replies
View Related
Sep 14, 2010
I have an OpenSuSE 11.1 in vmWare ESX and every other boot I can't access any running network services (ssh, webmin, qmail, mysql, ...) from outside. I just need to login, reboot and voila - network services are working.I gradually updated to 11.2 and 11.3 by following the wiki with success but this problem remained. So I reverted to snapshot of 11.1 and now I would like to identify and solve the problem here first.I also looked at /var/log/messages /var/log/boot.msg /var/log/lastlog but can't find anything usefull. I will now compare those files from the working and non-working boot but meanwhile someone already has an idea or experience what could be wrong?
View 3 Replies
View Related
Jun 10, 2011
Recently, I decided to migrate from SuSE 11.2 to 11.4. My 11.2 installation was working fine with two VLANs and several VMs. I went the route of installing 11.4 from scratch rather than upgrading 11.2.
The installation went smoothly. Afterwards, I ran Yast and changed eth0 to a bonding interface. Then I added two VLANs that used the bonding interface. When I restarted the computer, I saw the following on the console: "Waiting for mandatory devices vlan3005 __NSC__". Then after a 30 second countdown:
"vlan3005 no interface found". The solution to that problem was to add "ETHERDEVICE='eth0'" to /etc/sysconfig/network/ifcfg-eth0.3005". Upon restarting the computer, I could see that DHCP started this time but didn't get an IP address and continued in the background while the rest of the console messages scrolled by. At the point where X kicks in and I should have gotten a GUI login window, the screen goes dark. I cannot get to a console (CTRL-ALT-F1 or F2) or any other GUI login window (CTRL-ALT-F7 F8 or F9).
The computer was completely unresponsive. I could not ssh in to it from another host nor could I ping it. I let it sit for a few minutes but nothing ever appeared on the console. There were no blinking lights on the keyboard. I had to power the computer off. I turned off VLAN trunking on the switch port and the computer booted up fine, without network access, of course. I checked the logs but could find no clues as to what happened. I suspect a kernel problem. However, before I proceed further, I thought I would post my problem here and see if anyone has had a similar problem and perhaps a solution.
View 4 Replies
View Related
Dec 7, 2010
So I want to get mount/umount option under right click services menu. I went to Dolphin -> Settings -> Configure Dolphin -> Services -> Download New Services and from there I installed KDE CDEmu Emulator and MountISO. But neither of them is showing up in actual context menu. Neither in Dolphin -> Settings -> Configure Dolphin -> Services for that matter. I tried to install them as normal user and as a root. I went to have a peak in /usr/share/kde4/services/ServiceMenus/ but they aren't there as well... It's just me or lots of things seems to be not quite working in 11.3?
View 9 Replies
View Related
Jan 26, 2011
Suppose I have a bunch of web servers running on my internal network:
And I have a dyndns account, I was wondering:
How can I do this?
View 2 Replies
View Related
Jan 11, 2011
I have a question about /etc/services file. If I open ports in firewall, do I need to alter /etc/services file in order for certain apps to work?
kpasswd 464/tcp # kpasswd
kpasswd 464/udp # kpasswd
# Theodore Ts'o <tytso&MIT.EDU>
# 465 is illegal used by eMail Server
smtps 465/tcp # eMail Server
#urd 465/tcp # URL Rendesvous Directory for SSM
igmpv3lite 465/udp # IGMP over UDP for SSM
# Toerless Eckert <eckert&cisco.com>
digital-vrc 466/tcp # digital-vrc
digital-vrc 466/udp # digital-vrc
Above example shows if 465 tcp isn't altered, Postfix MTA fails to listen on 465 tcp port. What if there's a bigger span 3000:7000 TCP/UDP, is there a need to alter each line by hand?
View 2 Replies
View Related
Sep 12, 2010
I am trying to run php as cgi script with apache and opensuse 11.3. I disabled the mod_php and installed mod_fcgid, and php-fastcgi, as per the instructions here. I have been trying to achieve this, but, somehow it is now working. I can see the page if i have an index.html, but if i have index.php, it downloads it as a file. I really tried to set this thing up for more than 12 hrs now. I am soo frustated.
my /etc/apache2/vhosts.d/shekhar.conf
my /srv/www/wrapper/shekhar/php5
my /etc/apache2/conf.d/mod_fcgid.conf (I uncommented the lines inside the <FilesMatch > Tag., it gave me same result, even after uncommenting the tag.)
my /etc/apache2/httpd.conf
View 2 Replies
View Related
Jun 1, 2009
I am trying for the last many days to setup my opensuse 10.3 as Samba PDC Server according to the URL mentioned below, but in vain:How to setup SUSE 10.3 as Samba PDC - openSUSE When ever I try to join a Windows XP machine to the domain setup on Opensuse, I get the error:'The following error occured while attempting to join the domain. The network path was not found'. What could be the reason for this error despite of the fact the I am able to ping the FQDN of the PDC from the XP machine, but the XP machine simply denies to join the domain because of the above mentioned error.
View 7 Replies
View Related
Mar 25, 2010
Installed a security update for samba tonight via Opensuse updater.Now, when trying to access my home network an authentication box pops up (never used to)Asks me to enter authentication for my home network.I enter my username and password and hit enter. After a few seconds the authentication box pops up again askingfor the same indicating I have entered the wrong username / password combination (which I know I have not).
View 9 Replies
View Related
May 29, 2010
I have Apache Server working online under Fedora Core 6. But before I installed and configured everything, I've been testing in Fedora 12. The problem surges here, when I start the httpd service, every supuse 404 action on a web browser, takes me to localhost. I mean, if I enter google.com, no error, just goes to localhost, http://asdasd, no error, gives back localhost. I used to ignore the problem 'cause I thought it was a problem on my apache, but when I installed the Server on the Fedora Core 6 machine, I found that I have the same problem there. Of course, it only occurs when I am browsing through the same machine that has httpd started. Does anyone know how to change that??
View 6 Replies
View Related
Oct 16, 2009
I recently installed CentOS 5.3. There I select desktop package (Gnome and KDE) didn't select server in CentOS 5.3 installation gui. I want to connect to the windows active directory domain in our company. To do this I want to run the samba service. But it is not listed in the services. (#service --status-all) but I cant see the samba config file smb.conf why I cant run this other services smbd, nmbd is also not listed. But winbind is listed and I started it.
[root@bryan-adams etc]# yum list samba
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
* base: ftp.iitm.ac.in
* updates: ftp.iitm.ac.in
* addons: ftp.iitm.ac.in
* extras: ftp.iitm.ac.in
Available Packages
samba.i386 3.0.33-3.7.el5_3.1 updates
View 2 Replies
View Related
Oct 21, 2010
I can see this phenomenon on 2 different systems running 11.3 .In simple mode and also in expert mode.
View 9 Replies
View Related
Jan 28, 2010
I have been trying to get my Samba 3.x NAS to connect to my Windows XP laptop. I can see the server though I cannot open it and see the shares. I have run various tests on the network and Samba (ping, smbclient) though still cannot find why I can't connect.
I can access the NAS via webmin, so I am thinking I need the security or the services settings on the XP machine. Is there a list somewhere of the Windows XP services and security settings required to share files?
View 4 Replies
View Related
May 1, 2011
I have upgraded to 11.04 all seems well except that now the two machines I have upgraded frequently hang while the screensaver is running. (with unity desktop). Is someone working on this? Gateway t-series notebook and a dell mini 9 netbook that are hanging. The netbook seems to be hanging the most.
View 2 Replies
View Related
Jun 15, 2011
I've a server with opensuse 11.4 (from a 11.3 upgrade), but I can't run Apache.. I've tried latest version (official repository and Apache repository), but it give me always same error:
[error] (38)Function not implemented: apr_socket_accept: (client socket)
I've have removed and reinstalled apr/apr-utils also, but nothing..
View 2 Replies
View Related
Jul 5, 2010
i have a server which i dont know what was installed on it, it was sent for me to find out.
View 5 Replies
View Related
Apr 21, 2010
I created a VMware Workstation VM with OpenSUSE 11.2. When I copy the VM to a new location the network configuration disappears. If I go into the networking control panel and save, the interface names are changed. Originally had 2 nics as "eth0" and "eth1", copy the vm, configure network and the interfaces are now "eth2" and "eth3". How do I get back to my original configuration?
View 7 Replies
View Related
Jan 20, 2010
I setup a debian home server some time ago and have successfully setup samba so my windows machines can access them and upload/download data off it.I have setup opensuse on this desktop and after allowing smb through the firewall I now seem to have read only access to the smb shares.I am using the same username and password as I do on my windows machine, so in theory smb server should see my username and password and allow me read/write, like it does in win7. Is this correct?
Having just thought about it I think samba is just a tool to get shares working between linux/windows and macos.Is samba even the best tool for linux - linux sharing? how do I get read/write access to my shares in opensuse?or do I use another program to see my shares?I'm a bit new to this linux- linux sharing so I apologies.
View 1 Replies
View Related
Apr 2, 2011
i know that there is already a command for it but it comes out with a lot of letters that makes it hard to find the services that are runningi'm talking about services like DNS, APACHE, DHCP, SAMBA, SSH etcis there a command that will list these services and related services that are running instead of showing a bunch of jumbled and lettered mess thats hard to comprehend
View 6 Replies
View Related
Dec 1, 2010
I am trying to run two different copies of vsFTPd service in the same server, one for IPv4 and the other one for IPv6. Because as I know that you cant run one vsFTPd server for IPv4 and IPv6 in the same time.
View 10 Replies
View Related
Jul 26, 2010
Samba is working correctly if Susefirewall2 is off. I have added Samba client and Samba Services for extern access but samba is not working when firewall is now on. Which services should I also add ?
View 1 Replies
View Related
Mar 27, 2010
I have installed openSuse and set up a as web server have apache2 running but need to change the MPM to worker. How is this done, I am new to OpeneSuse and Unix/Linux I know where to change the worker settings I just need to enable it over the prefork default. I know how they work I just need how to change to worker.
View 3 Replies
View Related
Mar 28, 2010
I desperately need to get my apache server on OPenSuse to use the worker MPM I have tried simply placing worker in the quotes of the apache file /etc/sysconfig/apache2 but when I stop and start apache in the task monitor it is still showing the httpd2 processes to be prefork. Also there seems to be a problem on restart saying it cant find MPM.
View 9 Replies
View Related
Jul 11, 2010
I was trying to set up a virtual host, but I could not find a sites-available to it. What is its alternative
View 3 Replies
View Related
Nov 25, 2010
There seems to be many different ways of controlling bandwidth usage of downloads of content from Apache2. Does anyone know which is the standard module deployed/deployable in OpenSuse?
View 2 Replies
View Related
Jan 5, 2011
Apache is set to start on runlevel 2, 3 and 5, just like MySQL. For some obscure reason this always fails. I tried resetting the runlevels, but this did not help and I always have to start apache manually after reboot.
How can I analyze this problem? In the Apache logs I don't find the cause. Is there an other log I can check?
View 9 Replies
View Related
