General :: Know What Services Are Running On Server?
Jul 5, 2010i have a server which i dont know what was installed on it, it was sent for me to find out.
View 5 Replies
ADVERTISEMENT
General :: Settings - In My Server The Iptables And Ip6tables Services Are Not Running ?
Jan 25, 2011In my server the iptables and ip6tables services are not running. But still i am getting some iptables and ip6tables related alerts on my /var/log/messages. My technical leader told me that there might be some mis-configuration in iptables configuration file. But i didnt see anything wrong.
Quote:
Quote:
What does it mean "Jan 25 11:01:32 beteduibsrv3 avahi-daemon[3308]: Leaving mDNS multicast group on interface eth0.IPv6 with address fe80::226:b9ff:fefc:6ec4."
Server :: Running Two Copies Of VsFTPd Services?
Dec 1, 2010I am trying to run two different copies of vsFTPd service in the same server, one for IPv4 and the other one for IPv6. Because as I know that you cant run one vsFTPd server for IPv4 and IPv6 in the same time.
View 10 Replies View RelatedCentOS 5 Server :: Show All Services Running / Installed In The Command Line?
May 6, 2011Howto show all services running/installed in the command line under Centos 5.6 Server?
View 6 Replies View RelatedGeneral :: Command That Will List All Running Services?
Apr 2, 2011i know that there is already a command for it but it comes out with a lot of letters that makes it hard to find the services that are runningi'm talking about services like DNS, APACHE, DHCP, SAMBA, SSH etcis there a command that will list these services and related services that are running instead of showing a bunch of jumbled and lettered mess thats hard to comprehend
View 6 Replies View RelatedGeneral :: Fetchmail Services - Running As Root Discouraged
Sep 26, 2010I have installed release CentOS 5.5 w/ fetchmail services. I've already configured the /.fetchmailrc in the correct format that I've learned from topics and I've checked also the sedmail running status. When I invoke the #fetchmail command this often happens:
fetchmail: WARNING: : Running as root is discouraged.
2 messages for user1 at mx.mailserver.com.ca: (1 of 2) (4353 octets) .....flushed
I have configured two NIC 's One for the public IP and another for the local network, I've tried to use the two IP's in the POP3 and SMTP settings of Mozilla Thunderbird but still user1 can't get messages.
General :: List Running Services On Remote Unix Box?
Jan 24, 2011Is there any unix command to list services running on remote unix box.
View 6 Replies View RelatedGeneral :: How Can Vsftpd Services & Xinetd.d Services Can Be Differentiated
Sep 13, 2010How can Vsftpd services & Xinetd.d services can be differentiated?
View 5 Replies View RelatedGeneral :: Mail Server On Amazon Web Services?
Mar 10, 2010We have our web site hosted by Go daddy and they provide us with the mail service as well. But there are a lot of constraints with the mail service with regards to the number of mail boxes, size per box, relays per user and so on.To avoid this, we are looking at other options. One is to have our own mail server but it will require a lot of infrastructure and expertise. But Amazon web services looks nice. They have infrastructure needed and all. One thing on my mind is the reverse look up of the mail servers. They wont be associated with the domain as both would be on different hostings. I am open to both windows exchange server as well as Linux server. Has anyone done this before or has any idea about it? I have gone through some of the threads in their forum and there are a lot of mixed views about it.And main concern everyone views is the reverse lookup. This could lead to all the mails sent from my server tagged as spam at the recipient end.I could not make out in which forum to write and hence in newbie. If this is enough about networking or server please move it.
View 9 Replies View RelatedOpenSUSE Install :: Running Services At Boot On 11.2?
Feb 19, 2010After upgrade of 11.1 to 11.2 I noticed that none of services that was started in 11.1 at boot are starting now in 11.2. I check run-level of services with
Code:
chkconfig --list
When I start services manually everything is OK, but on restart they do not starting. Another weired thing is that my SuSEfirewall2 is filtering everything on input, nevertheless my previous configuration is still there, but ports are closed.
General :: Ping Similar Command For Checking Server Services?
Jan 25, 2011I am looking for a command line utility like ping that can use for checking appropriate services on a server . I do not want do any port scan . I just want to use it for checking apache , mail,ftp and other services on a server if they are running or down.
View 3 Replies View RelatedGeneral :: Start X Server And App At Boot (or Services Load) Time
Oct 14, 2009I need to start an application (graphical) when the PC start, even before anybody login, and use/launch a specific user. Now only can do this manually; when gdm starts, switch to any text tty [ie. Ctrl + Alt + F1], then I login into the special user, start a X server, export the DISPLAY environment variable, and start the application.
With this steps:
Code:
$X :1 -verbose -nr -nolisten tcp &
# Maybe Metacity -> $ metacity
$export DISPLAY=:1
$JavaApp &
Now i need put this steps (script) in some place to launch the app automatically, and with and specific user [ie. manager].
How can I made it? Maybe in init.d? or an special xinitrc? And how can start the app with the specific user? And, if is possible, who can stop the app when the system going turn off? I have Debian 5.0 and a beginner knowledge of shell script.
Fedora :: Dbus Services Running When System Doesn't Have GUI?
Jul 28, 2010Should I have hal and/or dbus services running when my system doesn't have GUI? For example, in case of a mail/web server where I have console applications only on it.
View 4 Replies View RelatedSecurity :: Running Services Securely - Chroot And Virtualization?
May 26, 2011I'd like to run a Tor relay, but am trying to understand the security implications. For some time I've run my torrent client in a VirtualBox virtual machine, which is run as a very non-prived user, bridges directly to The Internets, and writes to one directory on the host. My belief is this is about as secure as it can be, but am open to suggestion.If I run a relay in the VM it wouldn't be associated with my use of Tor as a client, which is fine since there is no technical need for them to be connected and it's desirable for security.I read that chroot jails can be broken, particularly when run as root, so I don't really trust that. Also studied a vserver, but it must share the network setup which doesn't strike me as isolated enough.
View 14 Replies View RelatedFedora :: Samba Does Not Show Running Hosting Of Shares In The Services Gui On 11
Nov 13, 2009I am baffled by fedora's feeble attempts to work with Samba. I have ran various versions of Fedora for the last few years, and sporadically, the Samba gui and samba itself have had such problems. My current problem in Fedora 11 (64bit) is that samba doesn't seem to be running correctly. It is allowing the hosting of shares, but it does not show that it is running in the services gui. It shows enabled, but when I attempt to change it by starting or stopping, nothing happens. The samba gui also shows that it launches but then never actually starts. I saw very similar problems with Fedora 9.
View 14 Replies View RelatedFedora :: PC Boots And Start Running The Services The Screen Just Hangs?
Jun 10, 2011 Last time I installed the ATI graphics driver on my PC, it was'nt working fine so I uninstalled that driver. I restarted the PC after uninstalling the driver but then, when PC boots and start running the services the screen just hangs and I don't get into the desktop.
I tried to run the xfs service using service xfs restart and also gdm service using service gdm restart, but in both the cases it shows that Unrecognized Service. So, I think it means that the package for xfs and gdm service is not available in my PC. Is that so?
I tried to get into the desktop by running startx but it gave the following error :-
Fatal Server Error: no screen found
consult the fedora project support at [URL] for help.
check the log file at "/var/log/Xorg.0.log" for additional information.
giving up
xinit: connection refused (errno 111): unable to connect to X server
xinit: no such process (errno 3): server error.
OpenSUSE Network :: Samba And Other Services Hang While Apache Keeps Running?
Aug 26, 2011I have a little bit of a problem, I run openSUSE as a server on a Dell PowerEdge T610. I use it for sharing files in a local network and as a web server accessible through the public IP (configured through router DMZ). Also, I use Teamviewer for remote control in order to avoid some compatibility and network problems. Generally the computer runs flawless but from time to time, as about once in two weeks, all network related services except the Apache server which runs just fine, and is still accesible, crash. The Samba share can't be accessed anymore, the Teamviewer is also dead and the only way to put everything back in order is a restart. The thing is I don't know if an error occurs since the server hasn't got a monitor installed, and more than that I do most of my work remotely (as in miles and miles away from the location) and it takes me quite some time to actually get there and see what's happening.
So, any ideas what might be happening? I belive that there might be some information in some of the logs, but as I am not an expert in Unix like operating systems I don't exactly know where to start from.
Ubuntu Servers :: Enterprise Cloud Services Not Running On Boot?
May 7, 2010I downloaded the latest 10.4 server CD with the intention of running a small Ubuntu Enterprise Cloud. I am following the directions here: [URL] Ive got 2 laptops that are capable of the tasks assigned to them. Both have dual core Intel chips that are VT enabled, 4GB of RAM, 250GB hard drives. Ill use one ( "server" ) as the front end server running cc, clc, walrus and sc.The other one ( "node1" ) will be the only node controller on my little network. Ive also got another laptop as a client, running euca commands to make instances and what not.These three laptops are connected to a switch. server is 192.168.1.100, node1 is going to be 192.168.1.110, the client laptop is 192.168.1.120.
the server seems to install fine, I select Install Ubuntu Enterprise Cloud, use it as the Cluster, give the cluster a name and 10 IPs to assign, 192.168.1.150-192.168.1.160 After the server is done installing and reboots, I boot the node machine off the CD and again select Ubuntu Enterprise Cloud. It's at this point the install craps out, because it does not recognize a cloud computer on the network.
Indeed, as I go to the server I run
Code:
ps -aux | grep euca
and see nothing running. So I start the eucalyptus service, and run
Code:
sudo euca_conf --list-clusters
and nothing shows up. Ive done some googling, ran some more euca_conf commands, registering the cluster, enabling walrus, cloud and sc. I can access the web gui on the client laptop, then restart the node install on the node laptop. This time it does see the server as a cluster controller, but when it tries to fetch the preseed file, it seems to not know the cluster's IP, as the red box that complains about the lack of a preseed file lists the URL as [URL] ( or whatever the file is called, I dont have the error in front of me. )
General :: Vmware Server 2.0.2 Installation On 12 - Making Sure Services For VMware Server Are Stopped
May 19, 2010I have installed fc12 on my core2due machine, and I have installed the vmware server on it, its rpm is installed successfully with out any error, after that a message is displayed
The installation of VMware Server 2.0.2 for Linux completed successfully. You can decide to remove this software from your system at any time by invoking the following command: "rpm -e VMware-server".
Before running VMware Server for the first time, you need to configure it for your running kernel by invoking the following command: "/usr/bin/vmware-config.pl".
I tried this command and find the this message
[Akram@localhost Downloads]$ su -c "/usr/bin/vmware-config.pl" Password: Making sure services for VMware Server are stopped.
None of the pre-built vmmon modules for VMware Server is suitable for your running kernel. Do you want this program to try to build the vmmon module for your system (you need to have a C compiler installed on your system)? [yes] yes
Using compiler "/usr/bin/gcc". Use environment variable CC to override.
Your kernel was built with "gcc" version "4.4.2", while you are trying to use "/usr/bin/gcc" version "4.4.3". This configuration is not recommended and VMware Server may crash if you'll continue. Please try to use exactly same compiler as one used for building your kernel. Do you want to go with compiler
"/usr/bin/gcc" version "4.4.3" anyway? [no] yes
What is the location of the directory of C header files that match your running kernel?[/usr/src/linux/include]
Now it asks me in last lines that "What is the location of Directory of C header files that match your running kernal?"
General :: Terminal Command / Centos Server Starts Mysqld, Httpd And Ftpd Services At Boot Time Automatically?
Dec 27, 2010Can anyone tell me what command can be used so that the Linux Centos Server starts mysqld, httpd and ftpd services at boot time automatically?
View 2 Replies View RelatedOpenSUSE :: Dolphin Services - Get Mount / Umount Option Under Right Click Services Menu
Dec 7, 2010So I want to get mount/umount option under right click services menu. I went to Dolphin -> Settings -> Configure Dolphin -> Services -> Download New Services and from there I installed KDE CDEmu Emulator and MountISO. But neither of them is showing up in actual context menu. Neither in Dolphin -> Settings -> Configure Dolphin -> Services for that matter. I tried to install them as normal user and as a root. I went to have a peak in /usr/share/kde4/services/ServiceMenus/ but they aren't there as well... It's just me or lots of things seems to be not quite working in 11.3?
View 9 Replies View RelatedServer :: Find Web Hosting Services?
Feb 2, 2010How can i find web hosting services? I have my own site and want to web hosting for that.
View 2 Replies View RelatedServer :: Order Of Init Services
May 5, 2011How can I find the order of stated services in boot process? For example I want to check which one runs first: /etc/fstab or networking? I am using ubuntu server 10.04
View 7 Replies View RelatedRed Hat / Fedora :: Restart Server And DNS Services Gets Stopped
Jun 21, 2010I have a Linux server and 5 desktops. When I shutdown and restart my server the DNS services gets stopped. I dont want it to stop, when i shutdown. It should run. How to enable it.
View 2 Replies View RelatedServer :: VPS Provider Doesn't Have Domain Services
Oct 23, 2009I am running a linux VPS with ubuntu 8.04. My VPS provider doesn't have domain services so i have to host my own domain. I am using bind9 and cant "catch or grab or whatever you want to call it", my domain name. I used go daddy to create my domain and I created my own name servers with the ip's I use on my VPS. I have been trying to go at this all week, all i need to do is get my domain running and then my site will be good to go cause I already have everything else running smoothe it seems. any help at all is very appreciated. I dont know what kind of info you need from me so ask whatever you need to. I am going to use a fake domain and ip in on here just to protect myself.Also I have tried many tutorials and have been searching around the net and forums with no luck.
View 3 Replies View RelatedServer :: Set Up Alert Notification When Services Startup?
Jun 11, 2011I have tomcat server that requires restart to clear some java issues. I would like the system to send out an email alert that the tomcat got started everytime when it does. Anyway to achieve this whenever someone fires off a service?
View 1 Replies View RelatedServer :: Disable Unwanted Services In Other Than Squid?
Mar 5, 2011I have installed squid using CentOS 5.When the server boot there are default services which are enabled at Boot time. My server is dedicated only for squid proxy server.I want to know how that when my server boot only the relevant services should start which may helpful for squid. Remaining unwanted services should be disable because they are just occupying memory of the server. Kindly guide me which command I should use and which services may I disable for smooth functioning of my squid
View 1 Replies View RelatedServer :: LDAP Invalid DN - Authenticate Some Services
Jul 31, 2010I'm using Ldap to authenticate some services in my company, but from a few days, i finds some errors saying
Quote:
I'm using webmin to manage its servces.
CentOS 5 Server :: Cannot Run Samba - Not Listed In Services
Oct 16, 2009I recently installed CentOS 5.3. There I select desktop package (Gnome and KDE) didn't select server in CentOS 5.3 installation gui. I want to connect to the windows active directory domain in our company. To do this I want to run the samba service. But it is not listed in the services. (#service --status-all) but I cant see the samba config file smb.conf why I cant run this other services smbd, nmbd is also not listed. But winbind is listed and I started it.
[root@bryan-adams etc]# yum list samba
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
* base: ftp.iitm.ac.in
* updates: ftp.iitm.ac.in
* addons: ftp.iitm.ac.in
* extras: ftp.iitm.ac.in
Available Packages
samba.i386 3.0.33-3.7.el5_3.1 updates
OpenSUSE Install :: "System Services (Runlevel)" Deos Not List Any Services On 11.3?
Oct 21, 2010I can see this phenomenon on 2 different systems running 11.3 .In simple mode and also in expert mode.
View 9 Replies View Related