I have vsftpd executable with config file.I have put the vsftpd.conf file in /etc path on target board. vsftpd. conf file has option "listen=YES" for running standalone.but when i run the executable(standalone) it is not running. It is not giving any error message also.
View 7 RepliesI'm trying to get vsftpd running with both anonymous and local user access to the same folder. The directory I'm using is /tftp with the following permissions:
dr-srwxrwx 7 root root 12288 2009-08-14 15:54 tftp
My vsftpd.conf is this:
anonymous_enable=YES
local_enable=YES
write_enable=YES
[code]....
I set the default "ftp" user's home directory to /tftp (was /var/ftp).
I am trying to run two different copies of vsFTPd service in the same server, one for IPv4 and the other one for IPv6. Because as I know that you cant run one vsFTPd server for IPv4 and IPv6 in the same time.
View 10 Replies View RelatedI just made a Ubuntu Server install in a virtual machine and am having trouble setting up FTP to transfer files. I've installed LAMP and vsftp. The web server works great, but FTP gives a connection refused error locally and remotely from the host machine. 'Connection attempt failed with "ECONNREFUSED - Connection refused by server".' nmap localhost doesn't list FTP as open even though I have vsftpd set to listen. I've tried restarting vsftpd with no luck.
View 9 Replies View RelatedAny clue? I'm using the same key for root login and it works fine (also works fine for SFTP but i hate using that cause its extremely slow)
View 2 Replies View RelatedI have installed vsftpd by "yum -y install vsftpd",disabled anonymous login and set .When I use a linux client's file browser to login using a user account "ftpacc" by ftp://ip_address, its location is "/" instead of /home/ftpacc".When I use a window client to login, its location is "/home/ftpacc"
View 1 Replies View RelatedI have a situation when vsftpd do not allow to get files from directories deeper than chrooted directory.
I can get from chrooted directory.
I can put to chrooted directory.
I can put to deeper than crooted directory.
I can list directories and files deeper than chrooted direcotry.
But I can not get files (process starts and hangs) from directories deeper than chrooted.
Firewalls on both sides (client and server) are set to log every in and out connection that do not -j ACCEPT. Log files are empty, so I assume nothing is blocked by firewalls.
Permissions for files and directories, I want to get, are set to 777.
I am trying to install VSFTPD on my Fedora instance of Linux. I have a Wordpress blog that I want to access through FTP. I did an install on VSFTPD and am kind of stuck. I try to FTP into my IP through [URL]
View 2 Replies View Relatedi have a server and im trying to use ftp to edit my website with dreamweaver. im using vsftpd and i have access where i can read all the files but i cant add any. any clues?
View 5 Replies View RelatedI'm having a peculiar problem. I have VSFTPD working and everything works great on my local network! The only problem is that I can't get PASV mode to work over the WAN.
I've tried everything:
- making sure the pasv_enable, pasv_min_port, and pasv_max_port variables are set in vsftpd.conf
- punching holes in Shorewall for these ports via rules
- setting up port forwarding for these ports in my routers (although this might be unnecessary)
The problem, is PASV mode works fine when I access from either router (my server is behind two routers but not from my WAN IP. Could this be a problem with my ISP?
I have a running instance of vsftpd. It works like I want for ftp.thisdomain.com and now I want to have it serve for ftp.thatdomain.com from a diifferent document root at the same time. Just lik I can do with Apache. Is this possible? So browsing to ftp.thisdomain.com will take you do /home/ftp/.And browing to ftp.that domain. com will take you to /home/ftp/thatdomain/
View 1 Replies View RelatedI'm kinda new to all of this so I believe there's a simple solution for what I need I just don't know how it's done.
So I've configured a vsftpd, ftp server and enabled the anonymous user, therefore when I do
Code:
ftp://my_location.com
a directory like view is displayed in my web browser, corresponding to /srv/ftp where the files for the anonymous account are kept. Now I've made a little web page and I've copied it there, and can be executed running main.html so the address to access the web page would be
Code:
ftp://my_location.com/main.html
My problem is that I don't want anybody to have the possibility to see the directory like display so I'm wondering if when someone does ftp://my_location.com can't this be redirected so it will do ftp://my_location.com/main.html instead?, making the display of files and directories impossible from the ftp://my_location.com
This is as far as FireFTP can go to make a connection.
Code:
220 Welcome to Steve Test SFTP service.
AUTH TLS
Proceed with negotiation.
PBSZ 0
All the basic vsftpd.conf advice followed:
Code:
ssl_enable=YES
allow_anon_ssl=NO
force_local_data_ssl=NO
[code]....
I want to access ftp server without entering user name and password ,second thing i have create repository on my Installation Server that is redhat os now i have created another server and i want to access that repository so what changes i can do on /etc/yum.repos.d/server.repo file
View 1 Replies View RelatedI've got a new server and have vsftpd setup there , when i login using filezilla :
Response:230 Login successful.
Command:OPTS UTF8 ON
Response:200 Always in UTF8 mode.
Status:Connected
[Code]....
Ubuntu 10.04 32 bitsvsftpd 2.3.4 installed from sources
Code:
# cat vsftpd.conf
listen=YES
[code]...
I am trying to create multiple FTP sites on one Linux server (using multiple vsftpd-sitename.conf files) with default port '21'.
Below is the sample vsftpd site configuration,
# cat vsftpd-site1.conf
listen=YES
write_enable=YES
[code]....
I am unable to create above vsftpd site with port '21'. Below is the problem,
# vsftpd vsftpd-site1.conf &
[1] 14448
500 OOPS: could not bind listening IPv4 socket
I wonder, i can able to create above FTP site with another port (example, listen_port=60001 ). In Linux(vsftpd), can i use default ftp port '21' for multiple FTP sites?
im using vsftp with : chroot_local_user=YES. I would like to have a commune directory for every user.
View 2 Replies View RelatedThis is on Centos 5.3 by the way..... I had a DVD and, well, just wanted to test some things.. I'm aware that this is not the latest release.
And, by the way (I just read an earlier post) I've added the username and password with which I'm trying to login (..hello?).
I'm at work and I don't have a copy of my Vsftpd configuration file (don't wanna edit this whole thing - actually there is a copy, below). I've used Slackware for years and never had any issues with Vsftpd - it just works. I am trying Centos because I need help with upgrading my mail server (qmail) and there's not much help for Slackware users. Also, I used to run RHEL3 and had vsftpd working fine (had to copy some file to /etc/pam.d) but it worked famously. I compiled all my web server stuff (just don't like these default things where I have no idea how things are integrated) and I'm hung up on - of all things - vsftpd.
Anyway....When I try to log into my ftp server I get "KERBEROS_V4 rejected as an authentication type" and only the anonymous account works. Any other logins produce an error (incorrect login - see ya' later). I have SE Linux and the firewall OFF. I don't recall the directive, precisely, but my vsftpd.conf file is set allow local users to connect. I installed with yum and it added some lines at the bottom (one was about a user list and the other was about PAM). I've got a chroot list and a user list although it's not clear to me precisely where the user list should be placed. I actually uninstalled the RPM and compiled, too. I've done everything but call an exorcist. And I've found tons of posts regarding this on the net and none of the fixes worked. Man - on slackware you type "make" and "make install" (I build it with tcp_wrappers) and you're off to the races.
Actually - I did upload the vsftpd.conf file to work (where I'm at, now). Minus lines that were commented out it looks like this:
Could it, possibly, be something about how I am adding the user, the shell type, etc? I know that in Redhat I used to type "/usr/sbin/useradd -d /home/someuser joe". I've done it that way and I've also done it like so: "useradd -d /home/schmoe -s /bin/bash schmoe".
My apologies if this is the wrong board for this thread, but seeing how the issue appears to be related to where I'm connecting from, I thought this would be the place to look.To start off, I've been running VSFTPD on the box for a good year or so now. Until recently, everything seemed to be working fine, but during the past few days I've run into issues with it and have been having trouble pin-pointing the problem. I've gone as far as reinstalling VSFTPD and rechecking every line in the conf file to no avail.The issue presents itself when I try to login to the FTP server remotely. The moment I put my user name in, I get disconnected without any error message, simply connection closed. That isn't the case when I'm connecting locally from the server.If I try to connect remotely using eth0 (internal network), it works fine again... but if I try eth1 (external network)... it fails. I'm thinking it might be related to PAM, but so far have been unable to figure out what I need to change in the configuration there. Additionally, the PAM log file doesn't show any activity if I'm connecting through eth1, but displays it if connecting through eth0.
View 1 Replies View RelatedHi. I have Ubuntu 10.04, nm-applet is running in the background, my battery icon and sound icon are showing but my network icon has been missing for the past 2 days. It was working fine before but now it's not. How can I fix this issue if I don't have an ethernet cord? Is there a way to roll back the recent updates or do I need to reinstall my network manager?
I've tried restarting the system and I've tried killing nm-applet and reloading it using Alt F2. I get some Debug error.
When I try to run nm-applet --sm-disable
It says an instance is already running and then gives me a warning.
I tried removing "iface eth0 inet dhcp" from /etc/network/interfaces and then tried restarting by "sudo /etc/initi.d/networking restart"
It says:
What can I do to connect to the internet? I have a flash stick if its possible to download a .deb package on this mac and transfer it over to my other laptop to fix the problem. If its possible.
I need to remote access a PC(running winxp) from my laptop(running ubuntu 10.10) over internet.
View 1 Replies View Relatedextracted the netprobe file, installed the Java pkg, I edited the netprobe file for the java path which I got from the netprobe file I opened in gedit and then tried to start it.
Desktop/netprobe$ sudo ./netprobe start eth0
[sudo] password
Please edit the file netprobe and set the correct JAVA_PATH.
JAVA_PATH=/usr/java/j2sdk1.4.0_01/bin
Desktop/netprobe$ sudo ./netprobe start eth0
Please edit the file netprobe and set the correct JAVA_PATH.
Seems like it doesnt like the Java path. I also creatyed the symbolic link: /usr/lib/mozilla/plugins$ sudo ln -s JAVA_PATH=/usr/java/j2sdk1.4.0_01/bin password
I am doing backups and restores to and from a backup server machine in the garage (in case of fire or theft) using rsync, and the LAN is running much slower than I think it should. Best consistent speed I get is 40Mb/s. The lights on the interface cards indicate it's in Gb mode, and the interfaces are fairly new. The router is a Netgear WNDR3700 the top-of-the-line consumer-grade router. Hardwire only, using Ubiquiti ToughCable and ToughConnectors, less than a 50' run.
View 12 Replies View RelatedI ran a large system update yesterday, and after a system reboot (for a new kernel), my nfs shares refused to mount. I keep getting error messages stating that statd isn't running.Attempting to restart the nfs-common or nfs-kernel-server services results in the same error message.I tried starting it manually using rpc.statd, and even though I get no errors from it, it doesn't appear to actually launch it.
I've been looking around the web, but I haven't been able to find anything useful, or even understandable to me. Most of what I find are old bugs or dead-end threads. I managed to get my shares to mount by adding the nolock option to the mount commands, but I'm not completely sure what that really does or whether it's safe or not to do so.
I need to get a FTP daemon running on my computer, so I tried to install vsftpd It worked, but later I wanted to try pure-ftpd so I removed vsftpd. Then I discovered I wanted to go back to vsftpd, so I removed pure-ftpd. Now when I type
Code:
sudo apt-get install vsftpd
It returns something like this
Code:
nossr50@robert-HAL9000:~$ sudo apt-get install vsftpd
[sudo] password for nossr50:
Reading package lists... Done
Building dependency tree
[code]....
I have installed vsftpd and I configured the whole package and everything worked. But, after a reboot, it doesn't work anymore. Vsftpd is running. When I do "telnet localhost 21" the machine gets connected to localhost. It also succeeds when I type "192.168.2.10" (my internet IP address) or "86.80.107.30" (external IP address). So the connection is fine. I configured vsftpd to allow only given users, in this case the user bourne. Everyone else isn't allowed to use vsftpd. My main account is stan. So when I connect to the machine via SSH, I'm logged in as 'stan'. When I try to log in to the FTP server with "ftp localhost" and I fill my own username I get an error message saying permission is denied, I don't get a chance to enter my password. When I fill in the username 'bourne' it asks for a password, I enter it, and I get the message 'login incorrect'.
But now it's getting weird: When I switch to the user bourne in the shell by 'su bourne' and enter the same password for FTP, I get logged in as bourne. Then, when I enter 'ftp localhost', fill in the username 'bourne', enter its password, the login is succesfull! It doesn't matter where I connect to (local IP, external IP, localhost, or computer name) I get connected with the user bourne as long as I'm logged in to the shell with this user. Otherwise it doesn't work. Does anyone know why? Below is the config file of vsftpd:
[Code].....
I just installed Ubuntu server and wish to run an apache web server from it. I have that setup, with each user having their individual folder. (E.G) apache root /var/www/ LazerPhreaks folder is /var/www/LazerPhreak/ so their website would be www.mysite.com/LazerPhreak/) I wish to setup vsftp to let each user access their individual folder and upload website files via ftp. How should I go about this?
View 1 Replies View RelatedAfter giving it some thought, I decided to bail on proftpd, which I've used for some time.
I used
Quote:
But when I search around with locate proftpd, there seems to be a lot of "leftover" stuff. I'd like to remove all traces. Possible?
Now, I installed vsftpd:
Quote:
But when I try to start it, I get:
Quote:
I tried to locate its conf file, but I get this:
Quote:
Though I know it's at:
Quote:
Also, there does not seem to be a log file at /var/log/vsftpd.log or anywhere else.
how to configure vsftpd? i use rhel-5 server.
View 1 Replies View Related