Security :: Detect Viruses Inside The .vmdk - VMware - Virtual MAchine Disk Format - Image?
Feb 6, 2011
I have set up a virtual machine under VMware Player 3.1.2 in Debian. Operating system of this virtual machine is a Windows Server 2003. I would like to periodically test this Windows Server 2003 installation for viruses. Obvious solution would be to install an AV software under this Windows Server 2003 installation. However, I was wondering, is this possible to use NOD32 for Linux or clamav in order to test this Windows Server 2003 installation for viruses? Is NOD32 for Linux able to detect viruses inside the .vmdk file?
View 1 Replies
ADVERTISEMENT
Mar 4, 2011
i am trying to create an image of Slackware OS but vmware is not able to detect the disk. it gives me below error, "Unable to detect disks or volumes on the source machine. Make sure that the source is a supported linux distribution." can some one tell me what do i need to do to create the image.
View 2 Replies
View Related
Jun 20, 2011
I mount a few locations from a VMware virtual machine, but currently every time I start up VMware I need to re-mount the locations once the VMware image has started up fully, which gets tedious. I'd like to be able to mount them automatically when VMware is started.
I generally double-click the .VMX file (which is associated with VMware Player) to launch the virtual machine, but once it has finished loading I would need to run the mount commands manually or execute a bash script that does it.
Is there any way you can think of to have it done automatically? One way I can think of is to start my virtual machine by running a script that starts VMware player, sleeps for a minute or so, then runs the mount command - but setting the right sleep interval would be difficult because this varies a fair bit - and overall, it's a solution that's kinda icky and that I'd like to avoid if there's some better option.
View 3 Replies
View Related
Mar 30, 2011
I have been told that some virus scanners for linux (including but not limited to AVG, Antivira, clamAV, others) are available to ubuntu. My question is which of these still CURRENTLY support detection of WINDOWS viruses in addition to linux viruses. I would like to boot the Ubuntu live jump drive I have to scan windows machines and at least detect viruses, dont really need to repair. who knows which virus scanners compatible with ubuntu that will detect windows viruses as well
View 3 Replies
View Related
Jul 27, 2011
I completed the installation of VMWare Server 2.0.2 onto a CentOS 5.4 64-bit distribution. There is a VMware virtual machine file on the server in question, and I want to activate it through the application console.
I did not see anything readily apparent that would facilitate the importing of the virtual machine file. Does anyone have a procedure that can accomplish this task?
View 5 Replies
View Related
May 27, 2010
I have installed CentOS on a VMwareWorktation and that CentOS, i also install VMware Server (suscess) and setup a guest OS that, but i start this Guest OS, an error show "You may not power virtual machine in virtual machine"...
View 3 Replies
View Related
Jan 3, 2010
I read once that you could use VMWare's converter to convert a physical machine into a virtual machine to run in VirtualBox. Can someone point me in the direction of a tutorial or just give me instructions on how to do this? I was very confused by the converter and how to get the image to work with virtualbox.
View 1 Replies
View Related
Jun 2, 2010
I setup a private network from virtual machines and one of the machines is the DHCP server for the group. I want to specify a next-server for the DHCP server but I'm having trouble connecting to any of the machines that I lease IPs to. I'm just trying to do a simple ping/ssh to 10.0.0.252 (a machine with a lease) but it doesn't seem to respond. I'm assuming I need to be able to connect to my next-server but maybe I'm wrong.
View 1 Replies
View Related
Mar 12, 2011
Is there a way to run a non interactive program inside a virtual XP machine (virtualbox)?
I know that you can run programs on a remote machine if both machines are windoze, or if both are linux. but can you run one from the other?
View 3 Replies
View Related
Jun 7, 2011
I am running Windows 7 inside Virtual Machine Manager - running on Cent OS 5.6. My problem is that the Windows 7 'Window', is only about half the size of the screen. Is there any to change the resolution of the OS running inside Virtual Machine Manager?
View 6 Replies
View Related
Nov 18, 2009
I want to install Linux on a virtual machine (VMWare ESXi). My PC runs W7 64-bit. Can I install the new 32-bit Fedora Linux in a VM environment?
View 10 Replies
View Related
Jan 29, 2010
Since a few weeks I cannot open a console in vmware server 2.0.2 anymore. I don't know exactly when this started because I use vmware only occasionally (I have only 1 program (an old Ashlar DrawingBoard) which does not run properly in wine). VMware server and the console have been working before without problems, but now I get the message "Cannot connect virtual machine console." and it times out. This is on Opensuse 11.1 with VMware Server on the same pc, Firefox and the guest is Windows2000.
I have tried to disable all extensions in firefox 3.6, disabled the firewall, even created a new user (on the same pc) with a clean firefox, all without any result. However when I connect from a different computer which runs Internet Explorer under windowsXP, then I can get the console without problem.
So, somewhere there is something wrong between Firefox and VMware server.
View 4 Replies
View Related
Aug 25, 2010
I'm running CentOS 5.5 x64 and have just installed VMWare Server 1. I am able to create a new Virtual Machine, but when I go to power on the VM in order to install the OS (windows server 2003), either the host crashes/reboots (with "Run in Debugging Mode" turned on) or the VM simply does not start (with that Debugging box unchecked) and in the log there is an error along the lines of VMware Server unrecoverable error (vmx)
View 1 Replies
View Related
May 31, 2011
Is it possible to install CentOS on a VMWare virtual disk?
And if it is, how many MB is necessary for CentOS 5.6?
View 2 Replies
View Related
Aug 23, 2011
I'm running a 64bit Version of Windows 7. I'm also dual-booting 64bit Ubuntu 10.04 (if it matters). However, for this I'm trying to get this working on the Windows 7 side of things. I downloaded the BackTrack 5 32bit GNOME .iso file (BT5-GNOME-32.iso) to my USB stick fine and made a VM on VMware Player. I set the OS as "Other Linux 2.6.x kernel" (if it matters). However, when I go to play my VM I get the following screen. I know I'm supposed to type Startx to launch the GUI. However, nothing happens; it's completely unresponsive (and yes keyboard focus is routed to the VM). There is no response, the cursor doesn't even blink.
View 1 Replies
View Related
Sep 11, 2010
I am an administrator of a student lab with 20 PCs. I was thinking of a way to protect those machines in the long run with the presence of some students with destructive behaviour. The most suitable solution to install a Linux OS and use virtual machines to load Microsoft OS. This way once the OS fails I can simply replace the VM with a clone that was previously made.
The point is that most students have no experience with Linux, that's why I need to load the Virtual machine automatically at login and in full-screen view so that The startup process ends up in Microsoft OS through the virtual machine (VMWare based) in Linux platform.
update : I'm using Fedora13 Linux distribution. I believe that part of launching the VM in full-screen is more difficult than automatically launching VMWare at startup. Is there some way I can tell VMWare to launch a particular virtual machine in full-screen when it starts on boot?
View 1 Replies
View Related
Jul 6, 2010
I have a problem with my wired connection. The problem started when I tried and failed to install vmware virtual machine.... now I have no internet connection at all that I can see. This is output of:
ifconfig
eth0 Link encap:Ethernet HWaddr 90:e6:ba:97:64:f0
inet6 addr: fe80::92e6:baff:fe97:64f0/64 Scope:Link
[code]....
View 3 Replies
View Related
Oct 31, 2009
I have a WindowsXP virtual machine which I need to isolate from the host machine completely (have the host act as a bridge but not be visible on the IP layer at all.) It still needs to have Internet access. Obviously it has to be able to contact the router but I would like to be able to block port 80 (or even just block all SYN packets addressed to the router.) I also want to allow port forwarding from the router to the virtual machine. I can use basic iptables but this is way beyond me.
The host OS is probably going to be Debian Lenny but this is not built yet so if someone can recommend a different distro which is as lightweight as possible but will support VMWare, iptables and tcpdump then that would be great. I was thinking of Slackware but I have not used it in ages and from what I can remember their is no real package management.
View 1 Replies
View Related
Jun 9, 2010
VMware virtual machine with the RedHat9 can not recognize win7 hard drive, so can not be mount,how to solve? Situation is showed in the Figure,when type the command ,it do not display the hard disk, the picture is below [URL]
View 7 Replies
View Related
Aug 14, 2011
I'm using vmware3.1.4 player with ubuntu10.04 guest. Host OS: windows 7. Where do I download the Vmware Tools disk image? I've searching for hrs
View 3 Replies
View Related
Dec 21, 2010
whenever I run my winxp VM image, I will still see the BIOS, but as soon as it begin to boot the hard disk, a black screen will just stay there and nothing else happens. Maybe I was too harsh on my virtual machine and it decided to break down. anyway, Im running on fedora 11 leonidas.Is there any way for me to repair my winxp.img file? or is there any way I can rescue the current situation
View 10 Replies
View Related
Jan 3, 2011
I had set up 4 virtual machines on centos 5.5 system where I directed the image locations to an external storage. I have lost the image files in the storage, but I have the image files that were copied from the virtual machine image location. I want to put up the same system on the same computer by copying these backup images. However, when I copy the image file to the same exact location and start the corresponding virtual machine I get "no bootable disk" error. When I increase the size of the image using "qemu-img" commands, I can get rid of this error, but get "error reading disk" error. Is there a way to overcome these problems, or is it not possible to restore a virtual machine by copying the machine image file under ..../xen/images?
View 1 Replies
View Related
Feb 19, 2011
I installed Windows XP on my virtual machine. But I can not figure out a way to install software like VLC,Office2003 etc in that XP. How can I do it?
View 2 Replies
View Related
Dec 2, 2010
I couldn't find a clear answer to this, but is the linux-image-virtual package for host machines that will contain VMs, or a VM-oriented kernel for guest OS (ubuntu)? I have some guest VMs running on Microsoft's Hyper-V, and was looking for some further optimizations.
View 3 Replies
View Related
Sep 28, 2010
Is it possible to mount a virtual disk image like qcow2 as a rw filesystem? I would assume guestfs could do it, but I couldn't figure it out from the man page. Basically I want to be able to read and write to the contents of a Windows virtual machine, just like I mounted a physical disk.
View 4 Replies
View Related
Aug 3, 2011
I have a virtual disk image. Is it possible to boot the computer from it, instead of having to use virtualbox?
View 2 Replies
View Related
May 18, 2010
I'm trying to set up a virtual machine environment in Centos5.5. My hardware fully supports virtualization, and I'm running qemu as the hypervisor with Virtual Machine Manager as the GUI to manage and create VMs. Host hardware is a Dell PowerEdge T710, with a quad core Xenon processor and four 1TB disks in a raid 6 array.
Within the Virtual Machine Manager when trying to create a new VM, there is the option to not "allocate entire virtual disk now". What format is created when you "allocate entire virtual disk now" and when you don't?
I want to create a qcow2 image format, but it doesn't look like it is supported. Does anybody know how to create a VM with a qcow2 image format?
When you create a blank disk with "qemu-img create -f qcow2 disk.qcow2 3700G", it indeed does create a qcow2 image. However, Virtual Machine Manager is unable to read these images, claiming that it is 15 megs or so in size (which is what it actually occupies in host disk space until you try and put a VM into it).
View 1 Replies
View Related
Feb 20, 2016
How can i get a RAID virtual image disk?
What i need is to mount several directories from any other partiton (or file system) as a new merge file system that can grow or decrease depending on the free space. As if it was a dinamic RAID,so i can work with huge files distributed over the partitions mounted.
Ejemp: /mnt/sda1/dir_raid1 + /home/dir_raid2 + /mnt/sda3/dir_raid3 ---> /mnt/RAID/
mhddfs and unionfs <---- are not the solution im searching (cant use huge files)
View 0 Replies
View Related
Nov 14, 2009
I have Linux server with VMware Server 1.0.8. When I creating a virtual machine, I can not "send" a PING to the virtual machine. In the virtual machine, I have installed CentOS 5.3 (32bit). In the virtual machine I have defined the addresses IP. So, whey I can't "sent" a ping to the virtual machie? I have to set something on the Linux server?
View 3 Replies
View Related
Feb 27, 2011
I would like to build a bootable system image on an attached hard disk on a running CentOS machine.The hard disk would be moved to a headless server, where only SSH access would be available. It seems that all the documented install methods assume that the installation runs on the taget machine. In this case, I would like to create a bootable system image of CentOS on a running host system. The new install mage would generally have a newer version of CentOS than the running host system where the image is created. Also, I would prefer
to do a text-based install.
The reason for all this is that I have network access to several remote machines. I can ask disks to be moved between machines, but I have no physical access. In order to do software testing, I would like to have several system disks with different installed CentOS versions. It would be easer if I could build the system disks on one single machine. The hardware an all machines is very nearly identical.
View 1 Replies
View Related