General :: Auto-mount Virtual Machine Locations When VMware Image Finishes Loading?
Jun 20, 2011
I mount a few locations from a VMware virtual machine, but currently every time I start up VMware I need to re-mount the locations once the VMware image has started up fully, which gets tedious. I'd like to be able to mount them automatically when VMware is started.
I generally double-click the .VMX file (which is associated with VMware Player) to launch the virtual machine, but once it has finished loading I would need to run the mount commands manually or execute a bash script that does it.
Is there any way you can think of to have it done automatically? One way I can think of is to start my virtual machine by running a script that starts VMware player, sleeps for a minute or so, then runs the mount command - but setting the right sleep interval would be difficult because this varies a fair bit - and overall, it's a solution that's kinda icky and that I'd like to avoid if there's some better option.
I have set up a virtual machine under VMware Player 3.1.2 in Debian. Operating system of this virtual machine is a Windows Server 2003. I would like to periodically test this Windows Server 2003 installation for viruses. Obvious solution would be to install an AV software under this Windows Server 2003 installation. However, I was wondering, is this possible to use NOD32 for Linux or clamav in order to test this Windows Server 2003 installation for viruses? Is NOD32 for Linux able to detect viruses inside the .vmdk file?
I completed the installation of VMWare Server 2.0.2 onto a CentOS 5.4 64-bit distribution. There is a VMware virtual machine file on the server in question, and I want to activate it through the application console.
I did not see anything readily apparent that would facilitate the importing of the virtual machine file. Does anyone have a procedure that can accomplish this task?
I have installed CentOS on a VMwareWorktation and that CentOS, i also install VMware Server (suscess) and setup a guest OS that, but i start this Guest OS, an error show "You may not power virtual machine in virtual machine"...
I'm running a 64bit Version of Windows 7. I'm also dual-booting 64bit Ubuntu 10.04 (if it matters). However, for this I'm trying to get this working on the Windows 7 side of things. I downloaded the BackTrack 5 32bit GNOME .iso file (BT5-GNOME-32.iso) to my USB stick fine and made a VM on VMware Player. I set the OS as "Other Linux 2.6.x kernel" (if it matters). However, when I go to play my VM I get the following screen. I know I'm supposed to type Startx to launch the GUI. However, nothing happens; it's completely unresponsive (and yes keyboard focus is routed to the VM). There is no response, the cursor doesn't even blink.
I read once that you could use VMWare's converter to convert a physical machine into a virtual machine to run in VirtualBox. Can someone point me in the direction of a tutorial or just give me instructions on how to do this? I was very confused by the converter and how to get the image to work with virtualbox.
I am an administrator of a student lab with 20 PCs. I was thinking of a way to protect those machines in the long run with the presence of some students with destructive behaviour. The most suitable solution to install a Linux OS and use virtual machines to load Microsoft OS. This way once the OS fails I can simply replace the VM with a clone that was previously made.
The point is that most students have no experience with Linux, that's why I need to load the Virtual machine automatically at login and in full-screen view so that The startup process ends up in Microsoft OS through the virtual machine (VMWare based) in Linux platform.
update : I'm using Fedora13 Linux distribution. I believe that part of launching the VM in full-screen is more difficult than automatically launching VMWare at startup. Is there some way I can tell VMWare to launch a particular virtual machine in full-screen when it starts on boot?
How do I program a virtual machine to auto-start/boot upon boot up of the host system? I am experimenting with SNORT network intrusion detection system and have installed it inside a virtual ubuntu box which I want to start automatically.
I am running Debian Squeeze with icewm as desktop environment. I am trying to start feh automatically when the desktop finishes loading. I have tried crontab -e with @reboot /usr/bin/feh /home/user/photos/ & I think that the best way to do this would be to monitor for the x-session-manag process. The reason I think this would be a good solution is that I killed x-session-manag and it killed my x-session and straight to command line interface.
Since a few weeks I cannot open a console in vmware server 2.0.2 anymore. I don't know exactly when this started because I use vmware only occasionally (I have only 1 program (an old Ashlar DrawingBoard) which does not run properly in wine). VMware server and the console have been working before without problems, but now I get the message "Cannot connect virtual machine console." and it times out. This is on Opensuse 11.1 with VMware Server on the same pc, Firefox and the guest is Windows2000.
I have tried to disable all extensions in firefox 3.6, disabled the firewall, even created a new user (on the same pc) with a clean firefox, all without any result. However when I connect from a different computer which runs Internet Explorer under windowsXP, then I can get the console without problem.
So, somewhere there is something wrong between Firefox and VMware server.
I'm running CentOS 5.5 x64 and have just installed VMWare Server 1. I am able to create a new Virtual Machine, but when I go to power on the VM in order to install the OS (windows server 2003), either the host crashes/reboots (with "Run in Debugging Mode" turned on) or the VM simply does not start (with that Debugging box unchecked) and in the log there is an error along the lines of VMware Server unrecoverable error (vmx)
I can create a virtual machine I named vm1 and the virtual-machine manager says it's running.
I don't know how to load windows XP.
The vm1 virtual machine console is frozen with the message "Booting from hard drive." But I know it can't boot from hard drive because I haven't loaded windows XP yet. When I created the vm1 virtual machine I put the windows XP CD in the optical drive and directed the menu to the CD. I heard it running, but still the console is trying to boot from the hard drive. I never got to the point where it asked me any windows XP software loading questions.
I have a problem with my wired connection. The problem started when I tried and failed to install vmware virtual machine.... now I have no internet connection at all that I can see. This is output of:
ifconfig eth0 Link encap:Ethernet HWaddr 90:e6:ba:97:64:f0 inet6 addr: fe80::92e6:baff:fe97:64f0/64 Scope:Link
I have a WindowsXP virtual machine which I need to isolate from the host machine completely (have the host act as a bridge but not be visible on the IP layer at all.) It still needs to have Internet access. Obviously it has to be able to contact the router but I would like to be able to block port 80 (or even just block all SYN packets addressed to the router.) I also want to allow port forwarding from the router to the virtual machine. I can use basic iptables but this is way beyond me.
The host OS is probably going to be Debian Lenny but this is not built yet so if someone can recommend a different distro which is as lightweight as possible but will support VMWare, iptables and tcpdump then that would be great. I was thinking of Slackware but I have not used it in ages and from what I can remember their is no real package management.
VMware virtual machine with the RedHat9 can not recognize win7 hard drive, so can not be mount,how to solve? Situation is showed in the Figure,when type the command ,it do not display the hard disk, the picture is below [URL]
I upgraded to fc13 from fc12 recently. After the upgrade the virtual machine boot is stuck in grub loading stage 2. I have attached a screen shot of the picture for reference.
whenever I run my winxp VM image, I will still see the BIOS, but as soon as it begin to boot the hard disk, a black screen will just stay there and nothing else happens. Maybe I was too harsh on my virtual machine and it decided to break down. anyway, Im running on fedora 11 leonidas.Is there any way for me to repair my winxp.img file? or is there any way I can rescue the current situation
I had set up 4 virtual machines on centos 5.5 system where I directed the image locations to an external storage. I have lost the image files in the storage, but I have the image files that were copied from the virtual machine image location. I want to put up the same system on the same computer by copying these backup images. However, when I copy the image file to the same exact location and start the corresponding virtual machine I get "no bootable disk" error. When I increase the size of the image using "qemu-img" commands, I can get rid of this error, but get "error reading disk" error. Is there a way to overcome these problems, or is it not possible to restore a virtual machine by copying the machine image file under ..../xen/images?
I couldn't find a clear answer to this, but is the linux-image-virtual package for host machines that will contain VMs, or a VM-oriented kernel for guest OS (ubuntu)? I have some guest VMs running on Microsoft's Hyper-V, and was looking for some further optimizations.
Is it possible to mount a virtual disk image like qcow2 as a rw filesystem? I would assume guestfs could do it, but I couldn't figure it out from the man page. Basically I want to be able to read and write to the contents of a Windows virtual machine, just like I mounted a physical disk.
I'm trying to set up a virtual machine environment in Centos5.5. My hardware fully supports virtualization, and I'm running qemu as the hypervisor with Virtual Machine Manager as the GUI to manage and create VMs. Host hardware is a Dell PowerEdge T710, with a quad core Xenon processor and four 1TB disks in a raid 6 array.
Within the Virtual Machine Manager when trying to create a new VM, there is the option to not "allocate entire virtual disk now". What format is created when you "allocate entire virtual disk now" and when you don't?
I want to create a qcow2 image format, but it doesn't look like it is supported. Does anybody know how to create a VM with a qcow2 image format?
When you create a blank disk with "qemu-img create -f qcow2 disk.qcow2 3700G", it indeed does create a qcow2 image. However, Virtual Machine Manager is unable to read these images, claiming that it is 15 megs or so in size (which is what it actually occupies in host disk space until you try and put a VM into it).
When using Iceweasel to go to an on line classified site (Kijiji) the page seems like it never finishes loading. The circulating thing in the tab never stops rotating.
I wouldn't worry about it but after I get a bunch of tabs opened it will freeze Iceweasel.
Missing ifcfg-eth[2-5] fileset for ZNYX 345Q Quad Port 10/100 cards. I have showing in the gui network device that my ports for my ZNYX ZX345Q Quad Port card my ports are Auto eth2, Auto eth3 etc. My Motherboard and Intel cards show as System eth0 and System eth1.
There ARE corresponding entries for those in my /etc/sysconfig/network-settings/ directory, but there are not ifcfg-eth[2-5] files to correspond to these adapters. Can I just write my own files and that will do it?
How does Fedora 12/13 load these drivers into the kernel without having these ifcfg files?
I'd love to know if there is another way Fedora controls NICs / other system resources.
I have ubuntu running inside of a virtualbox on an xp machine. Is there any way to mount the hard drive that the virtual machine isn't using? AKA the C: drive of the computer?
I have Linux server with VMware Server 1.0.8. When I creating a virtual machine, I can not "send" a PING to the virtual machine. In the virtual machine, I have installed CentOS 5.3 (32bit). In the virtual machine I have defined the addresses IP. So, whey I can't "sent" a ping to the virtual machie? I have to set something on the Linux server?
I have a new 64 bit workstation (Dell Vostro i7) which I usually keep running for extended periods (read; days and weeks). I have realized that the system completely ignores when I insert a USB stick (LaCie 8Gb USB Key). By ignore, I mean it doesn't get mounted, and /media/ is empty. Interesting enough if I go into YAST and probe for Hardware Information, I find my USB stick there under the USB section. There is no specific entry for the key in /etc/fstab by the way, as far as I know I don't need to specify how a USB stick should be mounted. Auto-mount, when it actually works, is perfectly fine.
I have a file that was created in Virtual Machine Manager and I need to get it out of the virtual operating system(windowsXP). Writing to a USB would be ideal but that hasn't been working since I upgraded to Fedora12.Is there anyway I can mount the image to retrieve the file?wrong fs type, bad option, bad superblock on /dev/loop0, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so mounting as fvat doesn't work either.
I successfully installed the virtual box on my fedora 8 system, and also created a virtual machine with windows xp OS, it works nicely, I try to configure the serial port of my virtual machine and try to configure the path for the port "screen shot are attached" it gives me the error message also the "screen shot are attached" for your review.Is kind of mistake is going on during the path setting, and how to set the path for configuring the serial port of my virtual machine so that I can use the hyper terminal tool of windows.
