CentOS 5 :: Install On A VMWare Virtual Disk?
May 31, 2011Is it possible to install CentOS on a VMWare virtual disk?
And if it is, how many MB is necessary for CentOS 5.6?
Is it possible to install CentOS on a VMWare virtual disk?
And if it is, how many MB is necessary for CentOS 5.6?
I have installed CentOS on a VMwareWorktation and that CentOS, i also install VMware Server (suscess) and setup a guest OS that, but i start this Guest OS, an error show "You may not power virtual machine in virtual machine"...
View 3 Replies View RelatedI have a few mail servers, a mail log server and a web server running on Centos 5. Now I have a task: to avoid accidental crashes on the production servers while installing updates, my boss asked me to do clones (these clones will all be VMware virtual machines) of the servers (EXCLUDING the actual e-mails and log contents) and then to run those clones on VMWare Server. This way, first I will install and test updates on the clones and - if they will be running without crashes - I will apply the updates on the real production servers themselves.
I have already installed VMWare Server 2.0 I have a few questions: How do I build the virtual machines to exclude the actual mail files and mail logs? Can I use VMware Converter for this purpose, or do I have to use another program? How do I actually do this cloning? Is there a tutorial on how to do this?
I have set up a virtual machine under VMware Player 3.1.2 in Debian. Operating system of this virtual machine is a Windows Server 2003. I would like to periodically test this Windows Server 2003 installation for viruses. Obvious solution would be to install an AV software under this Windows Server 2003 installation. However, I was wondering, is this possible to use NOD32 for Linux or clamav in order to test this Windows Server 2003 installation for viruses? Is NOD32 for Linux able to detect viruses inside the .vmdk file?
View 1 Replies View RelatedI am trying to setup one of my virtual machines in VMware with CentOS 5.2
At the welcome to Centos screen I get the following message ??
an error has occurred - no valid devices were found on which to create new file systems. Please check your hardware for the cause of this problem.
I'm running CentOS 5.5 x64 and have just installed VMWare Server 1. I am able to create a new Virtual Machine, but when I go to power on the VM in order to install the OS (windows server 2003), either the host crashes/reboots (with "Run in Debugging Mode" turned on) or the VM simply does not start (with that Debugging box unchecked) and in the log there is an error along the lines of VMware Server unrecoverable error (vmx)
View 1 Replies View RelatedI completed the installation of VMWare Server 2.0.2 onto a CentOS 5.4 64-bit distribution. There is a VMware virtual machine file on the server in question, and I want to activate it through the application console.
I did not see anything readily apparent that would facilitate the importing of the virtual machine file. Does anyone have a procedure that can accomplish this task?
I want to install Linux on a virtual machine (VMWare ESXi). My PC runs W7 64-bit. Can I install the new 32-bit Fedora Linux in a VM environment?
View 10 Replies View Related1. Why do we need to use virtual simulation software such as VirtualPC, VirtualBox and VMWare to install linux?
2. Why linux OS always came with newer version and updates?
I have a problem with my wired connection. The problem started when I tried and failed to install vmware virtual machine.... now I have no internet connection at all that I can see. This is output of:
ifconfig
eth0 Link encap:Ethernet HWaddr 90:e6:ba:97:64:f0
inet6 addr: fe80::92e6:baff:fe97:64f0/64 Scope:Link
[code]....
I have Linux server with VMware Server 1.0.8. When I creating a virtual machine, I can not "send" a PING to the virtual machine. In the virtual machine, I have installed CentOS 5.3 (32bit). In the virtual machine I have defined the addresses IP. So, whey I can't "sent" a ping to the virtual machie? I have to set something on the Linux server?
View 3 Replies View Related[URL]VMware Workstation 7.0.1 Release Notes has a list of supported OS:[URL]According to that, RHEL 5.4 is listed as supported for both host andguest but CentOS 5.4 is only for guest. This is quite strange and, ifit is true, that could be a serious issue.I succeed to install vmware workstaion 7.1 on centos 5.5, but have run-time error:
[root@ ~]# /etc/init.d/vmware start
Starting VMware services:
VMware USB Arbitrator [ OK ]
[code]....
I have an i5 Thinkpad running Windows 7 64-bit. VT is enabled in the BIOS. I have installed vmware server v 2.0.2 but am unable to install Centos 5.5 x86_64 as a guest OS. The steps that I followed are as follows:1. Created a new VM, specifying RHEL 5 64-bit as the intended guest OS (per vmware documentation - Centos is not available as a selection2. Downloaded all 8 iso files for Centos v5.5 64-bit3. Modified the CD/DVD drive to 'connect at power' and use an iso with the path pointing to the x86_64 iso 1 of 8When I power up the VM, the console window displays 'ISOLINUX 3.11 2005-09-02 Copyright (C) 1994-2005 H. Peter Anvin' and nothing else. The installation splash screen never appears. As a test, I downloaded the first of 7 iso files for the 32-bit version of Centos 5.5 and pointed the CD/DVD drive to that iso. In that case, the installation starts as expected. I would really like to get the 64-bit version installed and running.
View 3 Replies View RelatedI get an unhandled exception when installing CentOS 5.5 64bit in vmware. In the details the tracebacks most recent calls seemingly involve python. I have uploaded an image of the exception window:
View 1 Replies View RelatedI have installed CentOS on a VMwareWorktation and that CentOS, i also install VMware Server (suscess) and setup a guest OS that,
but i start this Guest OS, an error show "You may not power virtual machine in virtual machine"...
I can't install centos 5 on vmware esxi 4 server.I use the netinstall cdrom and I get the splash screen with the kernel menu.After this, I can choose a language but then I get this error: "The CentOS CD was not found in any of your CDROM drives. Please insert the CentOS CD and press OK to retry."
I have tried it with the image on the datastore, a unc-path and as physical cdrom.I have tested all modes in the vmware cdrom settings (passthrogh IDE or Emulate IDE) - nothing helps.
Console 3 shows me:
loaded mptbase from /modules/modules.cgz
loaded mptscsihfrom /modules/modules.cgz[code]...........
I would like to configure and SAN disk. But I do not have a physical SAN disk. Is it possible to create and configure a Virtual SAN disk and work on it with virtual machines?I have around 400GB of space in my Laptop.
View 7 Replies View RelatedI am trying to install centos 5.5 inside of virtual box. I have downloaded 8 .iso files *bin-1of8, *bin-2of8 and so on. During the virtual box install I pointed virtualbox to the bin-1of8 file but it complained. Is there something I was supposed to do with the 8 files first? Some sort of merge?
View 1 Replies View Relatedhow do I switch to the text-based virtual terminals when using Fedora under VMware? I believe that normally you use ALT-CTRL-F2 through ALT-CTRL-F6, and F1 switches you back, but the ALT-CTRL is intercepted by VMware to allow you to switch back to the host OS.
View 5 Replies View RelatedSwitching between text consoles in a Linux virtual machine When the CTRL + ALT + F1 key combination is used to switch to another text console (terminal) on a Linux virtual machine, the host switches to a text console instead of the guest. Resolution The CTRL + ALT combination is used by VMware to direct the keyboard input to the host. Press CTRL + ALT + Space , press the F1 key (or desired Function key) while still holding down CTRL + ALT .
View 2 Replies View RelatedI am trying to install CentOS 5.2, and the installation ran out of disk space after running for about 2 hours.I checked the FAQ, and it said 1.2 GB. The disk is 3 GB. The default install was selected, and I think that it checks for sufficient available disk space before installing. Still, it ran for quite a while before announcing that it was out of disk space.The Installation Guide is not very helpful, since there is a blank page where the disk space requirement is supposed to be. I just picked the default installation. A search of the forums on "not enough disk space" did not return much.
View 13 Replies View RelatedWhy i cant install a new virtual machine from dvd/cd only via network install and which install media url i must paste in the option to install debian or Suse or redhat.
View 3 Replies View RelatedIs it possible to install Snow Leopard 10.6.6 VMware AMD edition (which I downloaded) on VMware linux? It is under Windows 7 so I just need to know if everything of VMware linux (like Hardware Virtualization) is the same under linux as for Windows.
View 1 Replies View RelatedI have an HP Compaq nx6125 laptop, which has an AMD Turion 64 2200MHz processor, running Windows 7 Ultimate. I have installed the VMware Workstation 6.5.2 [full] trial and am attempting to install Fedora 11 on a virtual machine.
I understand that the Turion processor is a 64 bit processor, so I downloaded the Fedora 11 x86_64 DVD iso image.
First I have to create a VMware virtual machine (VM) and choose a version for it. If I choose a version that is any of the 64 bit options (for example, "Other Linux 2.6.x kernel 64-bit", since there are specific options for RHEL but not for Fedora), I get an error message the moment I try to power on the VM and start the install, saying "The buslogic SCSI adapter is not supported for 64-bit guests in this release [...]". Then the VM just shuts down.
I guess this laptop does have a SCSI bus, but my disks are IDE and as far as I can see (System Information) the SCSI bus is not used (?).
On the other hand, if the VM I create is any of the 32-bit option versions, I get what seems to be just a warning, saying that I'm running a 64-bit guest OS (Fedora 11) on a virtual machine configured to run a 32-bit OS, and suggesting I change this to ensure the 64-bit guest OS will function correctly. What would be the risks / downsides of forcing the install anyways?
I will also ask for help on the VMware side, too, and it's not my intention to turn this into a VMware discussion, but I'm just wondering if anybody on the forum has worked with this combination (VMware 6.5.2 and Fedora 11 running within it, preferrable on an HP Compaq 6125 running Windows 7 Ultimate) ? If so, I'd really appreciate some feedback / pointers.
I used to work a lot with Linux back in the days of RH5.2, and it's been a while, plus I'm new to the virtual machine world, so bear with me here.
I had installed vmware player in my windows 7 OS. How to work on virtual consoles in vmware player were I had installed linux.
View 11 Replies View RelatedI am very much new to linux environment and I have a final year project of emulating services on Honeyd. I don't know how to install honeyd on Centos virtual PC. I will be very obliged if someone guide me.
I tried to install honeyd as mentioned on different websites but it is constantly giving me errors.
we are going to implement a virtual environment and I would like to install freenx on a virtual machine.
View 2 Replies View RelatedI have installed vmware server 2.0.2. when i am creating a virtual pc it stores in my root(/) directory which has a small space free.....so i wanted to change the location of virtual pc in another hard drive. main thing i wat to change location of virtual machines from (/var/lib/vmware/Virtual Machines/) main hdd to (/home/usrename/anotherdir)another hdd
View 2 Replies View RelatedSince a few weeks I cannot open a console in vmware server 2.0.2 anymore. I don't know exactly when this started because I use vmware only occasionally (I have only 1 program (an old Ashlar DrawingBoard) which does not run properly in wine). VMware server and the console have been working before without problems, but now I get the message "Cannot connect virtual machine console." and it times out. This is on Opensuse 11.1 with VMware Server on the same pc, Firefox and the guest is Windows2000.
I have tried to disable all extensions in firefox 3.6, disabled the firewall, even created a new user (on the same pc) with a clean firefox, all without any result. However when I connect from a different computer which runs Internet Explorer under windowsXP, then I can get the console without problem.
So, somewhere there is something wrong between Firefox and VMware server.
I am trying to configure VMWare tools to work with the linux-virtual kernel, but every time I supply the headers path to vmware-config-tools, it rejects it. What should I do to configure it?I am using the path:/lib/modules/2.6.35-23-virtual/build/includeBut I get the rejection message:The path "/lib/modules/2.6.35-23-virtual/build/include" is not valid.It works with the generic version, so what am I doing wrong?
View 2 Replies View Related