I installed Windows XP on my virtual machine. But I can not figure out a way to install software like VLC,Office2003 etc in that XP. How can I do it?
View 2 Replies
I am running Windows 7 inside Virtual Machine Manager - running on Cent OS 5.6. My problem is that the Windows 7 'Window', is only about half the size of the screen. Is there any to change the resolution of the OS running inside Virtual Machine Manager?
View 6 Replies View RelatedI setup a private network from virtual machines and one of the machines is the DHCP server for the group. I want to specify a next-server for the DHCP server but I'm having trouble connecting to any of the machines that I lease IPs to. I'm just trying to do a simple ping/ssh to 10.0.0.252 (a machine with a lease) but it doesn't seem to respond. I'm assuming I need to be able to connect to my next-server but maybe I'm wrong.
View 1 Replies View RelatedIs there a way to run a non interactive program inside a virtual XP machine (virtualbox)?
I know that you can run programs on a remote machine if both machines are windoze, or if both are linux. but can you run one from the other?
I have set up a virtual machine under VMware Player 3.1.2 in Debian. Operating system of this virtual machine is a Windows Server 2003. I would like to periodically test this Windows Server 2003 installation for viruses. Obvious solution would be to install an AV software under this Windows Server 2003 installation. However, I was wondering, is this possible to use NOD32 for Linux or clamav in order to test this Windows Server 2003 installation for viruses? Is NOD32 for Linux able to detect viruses inside the .vmdk file?
View 1 Replies View RelatedI have installed CentOS on a VMwareWorktation and that CentOS, i also install VMware Server (suscess) and setup a guest OS that, but i start this Guest OS, an error show "You may not power virtual machine in virtual machine"...
View 3 Replies View RelatedI'm having some issues with a windows virtual machine. The system is Fedora 11 and the virtual machine is Windows 2008 Server. If I start the virtual machine from the virtual machine manager, it only has a single cpu despite my setting it to eight. If I start the machine from the command line, I can get four cpus but not eight. In both cases windows seem to display the eight cpus in the device manager (or whatever program it is). It has been suggest that windows was imaged on a four core machine before being loaded on the eight core machine and that something in windows is maxing at four cores. But that doesn't explain why the virtual machine manager can only start one cpu. I just played around on my home machine with a fedora 10 live cd and it recognized the two cores on that machine and used them from the virtual machine manager without problem. Also upped it to three cpus without problem.
View 2 Replies View RelatedI tried to yum install libvirt but it says it is the latest.I have also checked that i have the latest qemu-kvm virt-manager virt-viewer python-virtinst.I understand that the error msg says that it is unable to find that certain file, libvirt-sock, and i dun think i have it either.
View 3 Replies View RelatedI have the virtual machine manager in fedora 11.On Dell Inspiron 1545 (dual core, 2GB RAM)I can not run any linux distribution virtualized Using Qemu as engine.The virtualized system boots but after not working.Try distributions of 32 and 64 bit.
View 3 Replies View RelatedI get errors when trying to manage my VM with Virtual Machine Manager.When adding the disk img, it complained that it didn't have search rights and tried to fix it but failed.It let me move on so I moved forward.I then built the VM and I couldn;t start it from within VMM.
View 2 Replies View RelatedI have an F12 installation on which I have installed NoMachine's NX server. I can remote in nicely when needed (try to do as much as possible via SSH) while not having to boot into and stay on Gnome on the server and run VNC.I noted that when I try to start the Virtual Machine Manager from an NX session, I get an error that VMM is "unable to open a connection to the libvirt management daemon". libvirtd is running, however. And, when I startx on the server and try there, VMM works fine.Is this an inherent problem with the use of VMM, or something correctable?
View 4 Replies View Relatedi have fedora 11 installed on my laptop. i used to run another linux flavor through virtual machine manager but it is giving error. i have just tried it with different flavors. i tired it with BACKTRACK, UBUNTU AND MINT(live cd) each time it gives error. last time i tried with QEMU type connection as loca installation media(iso). with the MINT iso it gave the error.
View 1 Replies View RelatedI'm using fedora 13(x86_64).i installed windows xp in the virtual machine manager(which comes along with my distro).i installed it after creating the virtual hard disk,but after completing the installation of windows xp,the hard disk is not booting,it throws an error like the following picture.
View 3 Replies View Relatedi want to run winxp really bad in virtual machine, but have yet to get the programs to open without error.
View 14 Replies View RelatedUnable to complete install: 'Invalid install location: Mounting location nfs://192.168.1.12/var/ftp/pub/ failed' when i try to make virtual machine using virt-manager. i get this error.why this occur,please tell i take these steps for making virtual m/c.
1 change system ip into static and install virtualization group.
2 make one partition where i want to install vitual m/c
3 then vim /etc/exports, in which i give path where is data and give rw permission to all. then restart services of portmap and nfs.
4 then on login with xen kernel and on terminal i give virt-manager command and follow steps. at last i get above error. where i m wrong,clearify me so i make vir m/c .
How do i create two partition on my hdd and install rhel on one and windows xp on the other
View 2 Replies View RelatedI have a file that was created in Virtual Machine Manager and I need to get it out of the virtual operating system(windowsXP). Writing to a USB would be ideal but that hasn't been working since I upgraded to Fedora12.Is there anyway I can mount the image to retrieve the file?wrong fs type, bad option, bad superblock on /dev/loop0, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so mounting as fvat doesn't work either.
View 3 Replies View Relatedinstalled vmm, then when i tried mounting i get this error message;Unable to open a connection to the libvirt management daemon.
View 3 Replies View RelatedI used my fc13's "Virtual Machine Manager" to install a FC14 vm image from a new iso.After a week of 8 hour days I got fc14 installed, I think that the "minimal" install option was bad. Now it takes yum 15 minutes to get warmed up. and about an hour for 1 simple package.(It was going in the background while working on other stuff, causing the cpu fan to roar with the extra load)It would be easier to install Fedora on an abacus or perhaps water clock.
View 2 Replies View RelatedI want to experiment with pacemaker, and for that I'd like to start kvm virtual machines with the snapshot option, so that as soon as I stop the vm, all changes are gone and I can start over. Since I couldn't figure out how to setup networking (vm - vm and vm - public) with a kvm commandline without disturbing the Network Manager, I used the Virtual Machine Manager (VMM) for this.
It works now, but I cant see how to use the snapshot option with the VMM. On the other hand, I cant see how I start the resulting vm from the commandline. When I look at the process list, I see the command with these network options:
Code:
-netdev tap,fd=21,id=hostnet0
-device virtio-net-pci,netdev=hostnet0,id=net0,mac=52:54:00:45:30:b0,bus=pci.0,addr=0x3
-netdev tap,fd=22,id=hostnet1
-device virtio-net-pci,netdev=hostnet1,id=net1,mac=52:54:00:84:5b:bc,bus=pci.0,addr=0x6
How would I go about these fd=nn things on the commandline? I guess I somehow have to start the tap devices before, but how?
I'm running Fedora 11 (2.6.30.10-105.2.4.fc11.i686.PAE) 8 GB memory on a AMD Phenom(tm) II X4 965 Processor, 4 core server I just built.The problem I have run into is any virtual machine that has >1024 MB memory assigned to it will not boot. As along as it has 1024 MB or less it boots fine.The symptom you see is a very quick message "Booting from hard disk" the screen then goes blank, you can't login through SSH, and can't ping the network address so I know it's not some crazy video problem hiding the boot process.The attachment are messages from a failed boot attempt.
View 4 Replies View RelatedIt complains that it can't connect to localhost because probably libvirtd is not running. Well it is running, so please share your wisdom with me. Here is error message:
[Code]....
Are there any open source Virtual Machines which have web based administration. I am setting up Ubuntu 10.4 x64 and would really like to find a usable virtual machine manager. I really like Virtualbox but only the full version has web based administration. I have also tried VMware but it isn't open source.
View 9 Replies View RelatedI'm trying to set up a virtual machine environment in Centos5.5. My hardware fully supports virtualization, and I'm running qemu as the hypervisor with Virtual Machine Manager as the GUI to manage and create VMs. Host hardware is a Dell PowerEdge T710, with a quad core Xenon processor and four 1TB disks in a raid 6 array.
Within the Virtual Machine Manager when trying to create a new VM, there is the option to not "allocate entire virtual disk now". What format is created when you "allocate entire virtual disk now" and when you don't?
I want to create a qcow2 image format, but it doesn't look like it is supported. Does anybody know how to create a VM with a qcow2 image format?
When you create a blank disk with "qemu-img create -f qcow2 disk.qcow2 3700G", it indeed does create a qcow2 image. However, Virtual Machine Manager is unable to read these images, claiming that it is 15 megs or so in size (which is what it actually occupies in host disk space until you try and put a VM into it).
I installed Ubuntu 10.04 inside VMware Player running in a WinXP SP 2 host. But Ubuntu can't seem to get any keyboard input. This means I can't even log in, as I can't type the password. I clicked in the VMware window, and tried pressing Ctrl+G etc, but to no avail. Anyone else encountered this issue?
View 7 Replies View RelatedI have a reader program which runs only in windows. Now I have a windows xp installation iso on one of the partitions. How can I set up a virtual machine environment of windows xp, so that I can run windows programs?
I've tried wine but I cannot figured that out. I think a virtual machine is the choice. but do I also need install those drivers and microsoft stuff, like direct X 10?
Linux ubuntu 11.04 does not install on my virtual machine? I have a problem installing ubuntu on my virtual machine. recently I downloaded ubuntu and burned it to a cd and a dvd. but now I have a problem, when after the setup is nearly 80% percent complete. the installation stops and says that cd or dvd has a problem. but I have tested the cd and dvd and even the dvd drive, also the .Iso file using 7zip and cd checker. I allocated 304 mb of ram out of 896 mb. I am using oracle vbox 4.0.6 and win xp as host.
View 3 Replies View RelatedHow I can install Windows on my Virtual Xen Machine on my Debian Lenny HETZNER EQ4 Server.
I've found a old Tutorial but I don't understand it. I would like to ask you how I install Windows from a ISO. Image as a Guest on my Debian Host.
i have debian lenny installed, download the debian-507-i386-netinst.iso and installed with the VirtualBox virtual machine, the network is working, when i run the apt-get update downloading the cache:
View 1 Replies View RelatedI am dual booting a pc with Ubuntu and Windows 7. I am using Grub as the boot loader. I then boot into Windows 7 and Create a virtual hard drive (.vhd) file using Disk2Vhd. After the machine is converted, I boot into Ubuntu, and import the .vhd into Virtualbox.
Problem:When I turn on the virtual machine in Virtualbox, It comes up with Grub rescue. How do install Grub to the virtual machine. I can boot the virtual machine in virtualbox off of a Ubuntu CD, and then somehow install Grub...
