General :: CUPS Printing To Win 7 Shared Printer?
Jan 20, 2011
I'm running Red Hat Linux and CUPS 1.2.4. I can print a test page to a Win 7 shared printer ok. However, when I issue the lpr command from a user or root, it won't print. The CUPS message is "Remote host did not accept data file (1)" and the job just hangs till I cancel it. The only thing I can tell that is different is that when the test page from CUPS is generated, it uses user "guest". When I try to print it using the lpr command, the user is "eddie" or "root". I tried adding a user account named "eddie" to the Win 7 box, I can print successfully from both CUPS and users on several other Win XP boxes.
View 11 Replies
ADVERTISEMENT
Jul 21, 2010
Installed fedora/configued samba, shared printer and i am not able to access shared printer from any of the fedora machine. I am able to access the printer /shared folder from windows machine. I dont know the process of cups installation.
View 1 Replies
View Related
Jun 25, 2011
I have been printing with this laser printer (connected via LAN) for months without a single glitch, when suddenly today I had to quickly print a document. I could not print it. At first I thought the printer was off, then I double checked it was on. I restarted the CUPS server, reinstalled the printer in CUPS, nothing will work. When I send a print job, (I am using XFCE btw), I see the printer icon in the tasktray and it has a small warning sign.
Opening the print queue, I see "Processing - Printer Warning". In cups, I see nothing unusual. It says (in the printer queue): processing since Sat 25 Jun 2011 10:13:30 AM EDT. I can print a test page FROM the Printer web interface, confirming the printer works. I can print with the other printers. CUPS detects the printer and does not report anything unusual. What is going on with CUPS?
View 8 Replies
View Related
May 4, 2011
Background: I have a Desktop running Windows 7 Professional that has a Brother HL-2140 laserjet printer attached to it. I can successfully view the Windows 7 shares using SAMBA, but when I choose NETWORK PRINTER > WINDOWS PRINTER via SAMBA > BROWSE, I receive an error "NO PRINT SHARES - There were no print shares found. Please check that the Samba service is marked as trusted in your firewall configuration."
I have no firewall installed, the Windows printer is shared, and before I upgraded to Natty, all worked fine under Ubuntu Maverick. When I run the "testparm" command, I noticed that the line under [printers] states "browseable = No" even though in my smb.conf file it is set to "browseable = yes" (and I have changed/saved this file several times, using "sudo" with the same result).
I would like someone to look over my enclosed settings and see if there is a tweak I need to make in order to browse my Windows 7 shared printer.
[Code]...
View 2 Replies
View Related
Feb 17, 2010
I have a brand new Canon MF4350d printer/copier/fax/scanner installed and shared on XP that I can't get working on Ubuntu!
XP prints test pages fine. Ubuntu sees the XP shared printer, it sends print jobs, and the XP machine even receives the print jobs (I can see them "spooling" in the XP print manager) but then nothing happens. The job leaves Ubuntu showing 150k but then shows 50 bytes when received in XP before disappearing from the queue.
How I got to where I am...
There was no native driver in Ubuntu for the printer, so I downloaded Canon linux drivers source and compiled (including make install) based on some other threads I've found such as this one.
Compiling left me with PPD files that seem to be specific to the MF4350, although their names show MF4350z not MF4350d. I'm not sure why there were three different files with slightly different names (CNCUPSMF4350ZJ.ppd, CNCUPSMF4350ZK.ppd, and CNCUPSMF4350ZS.ppd).
I added the printer manually using the Ubuntu printer browser setup (Samba) and selected the .PPD files manually. I've tried all three different .PPD files to no avail.
I've toggled bi-directional comm. and tried different print drivers on XP. Nothing's worked yet.
View 8 Replies
View Related
Apr 7, 2010
I want to print from my linux box to my win7 pc that has a shared printer. I have cups installed and tried to add pritner using samba, but was unsuccesful, gave me an error when trying to add. The guide i followed is: Yet another Linux to Windows printing tip -- Debian Admin The printer model is a dell 2330d laser printer, it is not in cups, so i added the ppd file i got off the dell support site. I am aware that there is a native suse driver, but i want to print to the windows printer.If possible I would like to know how to do this via command line instead of the GUI.
View 9 Replies
View Related
Jun 30, 2010
I am currently running Lucid on my system and can't seem to get my printer on a Windows XP computer to print documents sent from my Ubuntu computer. I can see the Windows XP computer in Nautilus under Network and can even access the shared files on the Windows computer with no problem. I have been able to install the Windows shared printer on my Ubuntu computer using System>Administration>Printing>Add>Network Printer>"Windows Printer via Samba" without any error messages. The problem is that whenever I send a printing job to the shared printer, the printer acts like it is going to start printing then automatically stops just right before the paper is going to be fed. I have memorized the noises my printer makes right before the paper gets fed. That is how I know it stalls right before the paper is about to be fed.
When I check the print queue on my Windows computer, its status is "printing", but it never does. I have tried this with two different HP printers (Deskjet 3940 & PSC 1410), and it is the exact same problem on both.
View 1 Replies
View Related
Sep 5, 2010
I apologize if I'm a little wordy. I'll give the problem, then a detailed list of my setup (to help troubleshoot). Problem: I can't print from Ubuntu 10.4 on my Win7 shared printer. I also can't connect to the Win7 computer sharing the printer (probably a related problem).
Error Message:
1.) I click on Places, Network, Windows Network. I get an error that says "Unable to mount location, Failed to retrieve share list from server."
2.) I click on System, Administration, Printing, Add, Printer, Network Printer, Windows Printer via SAMBA, Browse..., and I get this error "No Print Shares, There were no print shares found. Please check that the Samba service is marked as trusted in your firewall configuration. To do this select System->Administration->Firewall from the main menu."
Network Configuration: I have a wireless/wired network (using a router) where the Ubuntu machine connects wirelessly and the Win7 machine connects wired. The Win7 machine is on a Win7 homegroup and custom named "workgroup". There is a username/password to log into the Win7 Machine. My other Win7 laptop connects just fine to the Win7 desktop's shared printer (and network drives). I know it isn't a issue of it not working (at least with other Win7 machines)
Problem: I'm assuming there is probably a setting in Win7 that needs adjusting (although I've looked at about everything I can find). I also don't know much about Ubuntu so it could very well be something I need to setup in Ubuntu. I checked already to make sure that SAMBA and the smbfs plugin is installed.
View 4 Replies
View Related
Aug 19, 2010
how to get clients connecting to an office printer. during a migration from windows server to debian/samba.
We have:
5 windows XP machines one Windows Server 2003 machine, PDC of the old domain One debian Samba PDC (of TEST domain)/print server (with CUPS installeD) running in a virtual machine hosted by the windows server One Toshiba eStudio 3511 printer
Using the CUPS control panel, I've been able to autodetect and add the printer, and it appears as an available share in SWAT for samba. However, the driver isn't perfect. CUPS could only supply drivers for the 3510c, not the 3511.
However, clients on the TEST domain are unable to access it. Doing so gives an error about a local policy preventing a connection to the print queue. I've tried googling this error and the fix that comes up in every result about changing a point and print policy setting, does not work.
however, I've been able to work around the issue. by first logging in as local administrator, navigating to the domain server, then inputting the domain root account credentials at the prompt. That allows me to attempt to connect to printers, but with a different error
"The server for the printer does not have the correct driver installed...."
I very strongly suspect that the 3510 driver actually will work, but it's just not being shared properly. The printer driver share folder is /var/lib/samba/printers, and that directory contains only a few empty subfolders. CUPS did not place the driver there as I would expect, and that is where clients are looking for it.
The thing is, I have no idea where CUPS DID put the driver.
On the old domain, the printer uses drivers for es4511, and looking on the toshiba site, this seems to be what they provide. The Toshiba Site provides a huge variety of drivers, including several windows ones, a universal driver, and a CUPS PPD. Cups asks for an optional PPD during install and I tried supplying that. It said installed successfully, but didn't change anything.
I've tried pasting the windows drivers into /var/lib/samba/printers/W32X86 too, and likewise with other drivers from toshiba's site. but this doesn't change anything either, so I'm at a bit of a loss.
how to install/setup drivers on a samba PDC, for windows machines?
Also relevant, my smb.conf:
anyone see any possible causes of problems?
# Samba config file created using SWAT
# from UNKNOWN ()
# Date: 2010/08/19 13:03:07
[code]....
View 12 Replies
View Related
Nov 1, 2010
I have been working through setting up a CUPS server on my Dell Dimension 2000 which is running Ubuntu 10.04. I have the server set up and the printer added and have gone through all of the steps the tutorials suggest to get the printer to be viewed on the network (set it to shared, allow other machines to view shared printers, etc). However, I can't find this printer on any of the other machine on my LAN (one machine running mac os x the other running Ubuntu 10.10).
View 2 Replies
View Related
Apr 1, 2009
My setup is like this: i have a small office network and i bought yesterday a new multifunctional printer Samsung SCX-4521F. It is shared with samba and connected to the server with USB. In the network everyhing works well, users can log on to the domain, print from windows to the new shared Samsung printer and i even managed to enable network scannin. But when i try to print from MS DOS i wont get a single page. We have an accounting program in dos. All the other computers are XP Pro SP3. My server is running for 2 weeks the newest CentOS with all updates. I'v maped the network printer in windows witht the command "net use LPT1 \ServerSCX-4521F. I get a message that maping was completed succesfully. If i start a print job nothing happens. "Printing" or "warming up" flashes several times on the printer and thats it.
CUPS error log:
I [02/Apr/2009:00:03:45 +0300] Adding start banner page "none" to job 125.
I [02/Apr/2009:00:03:45 +0300] Adding end banner page "none" to job 125.
[code]....
View 3 Replies
View Related
Dec 28, 2010
I have been able (with some hair pulling and gnashing of teeth) to print from outside the LAN to the printer connected via USB to the desktop computer at home, until the last upgrade. The laptop will forst say the printer may not be connected, but eventually (usually) after a while says the job was sent to the printer. The log files on the desktop - serving as the printer server have an error message in cups/error_log that I am not familiar with, and don't believe I have seen before. I am sure if I could decipher that error and figure out how to change the behavior to get rid of it, it would once again work. Printing from within the LAN is a no-brainer as it has been for the last several releases. The error that I get when trying to print outside the LAN (via the internet) is:
cupsdAcceptClient: 12 from <WAN IP>:631 (IPv4) Unable to encrypt connection from <WAN IP> - GnuTLS internal error. I am missing something as far as authentication from the laptop to the desktop. how to fix it.
View 1 Replies
View Related
Nov 25, 2008
I have a OpenSUSE 11 machine set up as a domain controller. I have set my printer up to be shared to Windows machines logging into the domain. I was able to install the printer to my Windows machines. When you go to the printers folder in Windows, it shows the printer but says "access denied" instead of the usual "ready". If I print to the shared printer the job will go through. I am thinking it is an authentication issue because if I log into Windows machine as "root" and let it build a profile, the printer doesn't show the "access denied" message. How do I allow other users to have access to the printer?
View 1 Replies
View Related
Feb 27, 2010
I have installed Canon ImageRunner 2018i on my linux box using CUPS web interface. When I try to install this as a network printer from a Windows XP machine, the windows XP machine keeps asking me for a device driver. Is there a way to configure the printer on CUPS/Samba so that when I try to install it on Windows XP machine as a network printer, it does not ask me for a device driver?
View 7 Replies
View Related
Feb 1, 2010
I cannot print form firefox 3.6 form linux suse 11.2. All the rest is printing. Piece form error log off cups
D [01/Feb/2010:19:52:00 +0100] [Job 62] page 2 1
D [01/Feb/2010:19:52:00 +0100] Discarding unused job-progress event...
D [01/Feb/2010:19:52:01 +0100] [Job 62] successfully sent print file, 24. packet, 65536 bytes (1536KB) ...
D [01/Feb/2010:19:52:02 +0100] [Job 62] successfully sent print file, 25. packet, 65536 bytes (1600KB) ...
D [01/Feb/2010:19:52:03 +0100] [Job 62] successfully sent print file, 26. packet, 65536 bytes (1664KB) ...
D [01/Feb/2010:19:52:05 +0100] [Job 62] successfully sent print file, 27. packet, 65536 bytes (1728KB) ...
D [01/Feb/2010:19:52:06 +0100] [Job 62] successfully sent print file, 28. packet, 65536 bytes (1792KB) ... .....
D [01/Feb/2010:19:52:08 +0100] Discarding unused printer-state-changed event...
D [01/Feb/2010:19:52:08 +0100] Discarding unused job-completed event...
D [01/Feb/2010:19:52:09 +0100] [Job 62] Unloading...
View 6 Replies
View Related
Feb 16, 2010
What printing protocols are supported by CUPS?
View 1 Replies
View Related
May 24, 2011
Since last few weeks i am struggling to setup printer connected to print server.
Here is the setup that i have:
I have Red Hat Linux machine from which i want to issue print jobs.
I have Windows Print Server having multiple printers connected to it.
I am able to print jobs from Windows client to any of these printers. But i am not able to print from Red Hat Linux. (i have verified that i can print using smbclient utility, but based on my reading, CUPS API could be used from application to discover, print and issue print jobs.)
I am not able to get the correct configuration for setting up CUPS client.
View 3 Replies
View Related
Mar 22, 2010
I have installed centos 5 and can print small to medium lpr files using cups fine (1 to 20 pages), but when i tried to print a file of 95 pages the printer just stops, I have to power off the printer and turn it back on and it will start printing again. It looks like some data is lost in this process. It may print 20 pages and stop. When restarted it may print 20 or 40 or complete the report.I can print to the devicectly and it works fine. It is only when the large print jobs are run through the spooler.I have tried on different printers and the same results, that's what makes me think it is a spooler problem.
View 2 Replies
View Related
May 1, 2010
Can CUPS print to a color printer? And also do I need a GUI running on my computer in order for CUPS to work?
View 1 Replies
View Related
Jan 4, 2011
I am running Slackware 13.1 64bit and the cupsd config is the one pretty much the default. I can connect to it from my browser at http://localhost:631 and play around with the options with no problem. I have been following a previous post on configuring a PDF printer [URL]. I am at the point of using lpadmin on the command line to create the pdf printer with the adobe distiller ppd file. When I try to do so it just hangs and eventually I get a connection timeout. When I do an lpinfo -v I get the same thing. If I try lpinfo -h localhost:631 the request returns immediately with nothing. I tried to create the PDF printer through the cups web ui but I did not get far.
View 2 Replies
View Related
Mar 3, 2010
I have printer in CUPS that due driver problems (hp 1010) form time to time goes into pause. I would like to write a shell script that will be once per hour resuming printer in cups.But I have no idea after googling for couple of minutes how to resume printer from shell command line.
View 5 Replies
View Related
Jan 7, 2010
I have a client.conf in /etc/cups that points to a CUPS server. I don't have u/p access to this server. I also want to print to a local printer (USB), but I can't set it up - ALL attempts bring me back to the CUPS server password prompt. Is there some line I can add to the client.conf to allow me to use a local printer?
View 4 Replies
View Related
Oct 22, 2010
How to enable Printer in CUPS using Command Line?
View 3 Replies
View Related
Oct 25, 2010
I have a mail-account, which is checked every 10. Minute for new mails (via getmail), printed(via cups/lpr) and the file is deleted if successful.
My problem is that I dont want to print the texthtml, but what it looks like when rendered.
What is the best way of doing this ? html2ps or ?
Is it also possible to print the attachments( PDF) inside the mail, this way ?
View 3 Replies
View Related
Jun 17, 2011
We want to print PDFs from a Linux server to a HP LaserJet 1320 PCL 6 which is attached to a Windows print server.
The command we use is
lp -d LaserJet sicl_rcpdebtnt_5.pdf
Problem is, the printout comes with the top 10% of the page not printed. i.e. the printing starts from about 10% of the PDF. The header and top information is not printed.
We tried the scaling option:
lp -o scaling=75 -d LaserJet sicl_rcpdebtnt_5.pdf
But that also has no effect. Only the characters become smaller but still the same problem is there.
What can we do to print the entire PDF in ONE page. When we open the PDF in Windows and print it we have to say Fit to printer margins for the printer's page scaling property.
How to set this in command line Linux?
View 2 Replies
View Related
Feb 14, 2010
After some effort, finaly managed to get my Canon PIXMAiP4200 printer connected as a network printer. (I connect it through the USB printer port on a DLink DI-524UP router) Everything seems ok so far, except that I cannot find any means of specifying that printing should start from the last page.
View 2 Replies
View Related
Sep 18, 2009
Centos 5 was set up for me on my server with VMware and XP SP3 as a guest. I have little to no knowledge of centos (or anything Linux) so i tend to leave well alone but i am trying to get a USB printer to work from my networked pcs through XP - Through VMware - Through Centos5 to the USB port on the back of my server. I am reasonably OK with XP but am not a techie so will probably need to be walked through this.
I can see the printer appearing on Centos' equivalent to device manager and when i print everything seems ok with the XP print queue clearing after a few seconds but nothing prints. At a guess i need some sort of software bridge- (is this SAMBA?).
View 5 Replies
View Related
May 4, 2011
I have a ciber and my server has Mandriva Linux I have machines with windows xp, 7 and Ubuntu, I haven't been able to add the already shared printer in Ubuntu... the machines with wins haven't given problems in adding the printer. When I try to add it, it can't find it in the network all machines are configured in the same workgroup.
View 1 Replies
View Related
Apr 1, 2011
I am trying to install a HP deskjet 1000-J110a. I downloaded a driver package thing, and I guess I unpacked it, and I made it, and I thought I installed it. I am totally confused and my brain hurts. The printing troubleshooter is telling me: Missing Printer Driver
Printer 'Deskjet-1000-J110-series' requires the 'foomatic-rip-hplip' program but it is not currently installed. I found something that is the 'foomatic-rip-hplip', but what the heck do I do with it?
View 9 Replies
View Related
Aug 26, 2010
Not sure if this is hardware or software so I am raising the question here. I have an Ithaca 280 printer that worked great on fedora 8 with cups 1.3.3. When I upgraded my server and installed Fedora 12 with cups 1.4.2 i noticed a 5 second delay between sending a print job to the printer and it actually printing. This issue doesnt happen with laser printers, just the ithaca thermal printer. I have tested this with 10 other ithaca 280 printers and all of them have the same result. I am using a raw driver, and it is an IP based printer setup for Jetdirect in cups. The setup is identical on a Fedora 8 server as it is on this Fedora 12 server. I have even taken the steps to upgrade to cups 1.4.4 just to see if it was corrected in a newer version, but the issue is still there. I have a utility that writes the raw text directly to the printer which i used to test that it wasnt an issue with the printer or its internal print server. That utility allows the document to print immediately.
what is causing this delay and how to correct it? If not, does anyone know how to print directly to the printer using cups instead of letting it go to the queue first like cups normally does for print jobs?
View 2 Replies
View Related
