CentOS 5 Networking :: Use VPN To Do Remote Printing On Windows Or Network Printer?
Feb 12, 2011
I have a virtual Linux box with a static IP in the cloud.
I have remote sites that have networked PCs that normally act as terminals but also have more than one printer on the Windows Network.
I would like software on the Window's machine to access the known IP address of the server and advertise the printers on the network so they can be printed to with lpr or cups. I don't have a problem manually setting up the printers on Centos if that is necessary. (But I need to know how to do that as well).
I need to know if I can setup a VPN on Windows without it stopping regular internet traffic and how to do it.
I need to know all the steps (what to install, what to issue commands for) to make this happen without using a GUI if possible and if the GUI is easier I need to know which GUI to install.
I also do not have a problem with using a VPN router at the client side if that makes it any easier. Like a Cisco RV120W.
View 1 Replies
ADVERTISEMENT
Jan 10, 2010
Printer is connected via USB to server PC running OpenSUSE 11.1 Client PCs are running 11.1, XP, Vista No problem printing from the Windoze machines
Printing is trouble free with the 11.1 client's firewall disabled, but no printer is available with firewall running.
In hopes of diagnosing the problem I figured I'd open everything I could think of until the printer remained available with the firewall running. Then I planned to start removing exceptions one at a time 'til removing one caused the printer to disappear.
I've gone to Yast>Security and Users>Firewall>Allowed Services>External Zone and tried addingSamba Server
NetBIOS server
Samba Client
Samba Server
VNC
[Code]....
View 5 Replies
View Related
Mar 28, 2009
I have a recently installed dual boot system with Centos 5.2 and Fedora 10. I connect across a LAN to a network printer HP Laserjet 1320n I have been through the printer installation / setup on both systems Fedora works fine, Centos doesn't want to know. Sending anything to print just adds it to a queue that is never printed.
I have looked at the printer management through Firefox browser localhost.localdomain:631 If I send a test page from here (CUPS) it reports the document as printed, but the printer just sits there blinking an orange light indicating an error.
View 3 Replies
View Related
Apr 7, 2010
I want to print from my linux box to my win7 pc that has a shared printer. I have cups installed and tried to add pritner using samba, but was unsuccesful, gave me an error when trying to add. The guide i followed is: Yet another Linux to Windows printing tip -- Debian Admin The printer model is a dell 2330d laser printer, it is not in cups, so i added the ppd file i got off the dell support site. I am aware that there is a native suse driver, but i want to print to the windows printer.If possible I would like to know how to do this via command line instead of the GUI.
View 9 Replies
View Related
Oct 15, 2009
I have a windows machine on my lan with a printer attached. I have samba running on my F11 laptop and I can use it to access shared files on the windows machine. But how can I use the printer from fedora? When I go to Administor>Printers then I just get an empty list, even after pressing 'rescan'. Do I have to change some firewall/samba configuration? If not then where else would I see the printer?
View 2 Replies
View Related
Nov 23, 2009
I just upgrade to Fedora 11.
I have problem in installing the printer, no matter add printer in local network or Windows Printer via Samba.
The summary is as follow:
I have download a printer driver and had installed but got error when I tried to printer a test page.
View 6 Replies
View Related
Dec 8, 2009
I'm running Fedora 11 and printing to both an HP Laser Jet 4Plus and HP Office Jet 7130 via a Windows 7 PC. I have a UID/PWD account on the PC that differs from that on the Fedora, also one that is identical UID/PWD to that used in Fedora. This has worked fine until "recently" (noticed it in ~last week or 2). Suddenly I'm being asked repeatedly to authenticate to print, neither account credentials are working. I get the message "Tree connect failed (NT_STATUS_ACCESS_DENIED)" and I get nowhere. I tried delete and reinstall the printers in Fedora, that works OK, can "see" them in setup on the Windows 7 host just fine. But can't get past the repeated authentications ...? I'm guessing something has changed in Fedora updates because this used to work with same Windows 7 PC in prior weeks.
View 1 Replies
View Related
Feb 26, 2009
From my Ubuntu Server 8.10, when i attempt to print to my network printer(Brother HL2700cn) it prints garbage and multiple blank pages. I also tried installing the Brother print driver (BR2700_2_GPL.ppd) as instructed, placing the file in directories: /usr/share/cups/model and directory /var/spool/lpd and restarted cups: /etc/init.d/cups restart. after all that, i get the same results, garbage and multiple blank pages. the printer has a static ip address
View 6 Replies
View Related
Jan 9, 2011
I have a HP c4100 series printer connected to my Ubuntu computer. This computer prints just fine. I also have a Windows Vista computer that's connected to the Ubuntu HP via CUPS (by installing network printer with path of http://xxx.xxx.xxx.xxx:631/printers/printername). This computer also prints just fine. My problem is I just got a new Windows 7 laptop, and connected it to the HP via CUPS the same way as the Vista machine. It installed fine. However the Win7 Laptop will not print. When I try to print, it acts like it is going to print, but never gives an error and the file never makes it into the printer queue (on either the win7 or ubuntu machines, i have tried printing with both queues open to see what happens).
Things I have already changed:
On the Ubuntu machine:Changed all the printer settings on printer to allow any and all connections including printing from the internet.
Edited the /etc/samba/smb.conf to allow CUPS printing and allow guest access
On the Win7 machine:Fixed my LAN security settings (disabled require 128bit encryption, send LM and NTLM responses)
Reinstalled printer several times. I have googled this issue almost every day for a month and tried every setting that I have came across (changed them back if it didn't help). So far nothing has worked for me, and this is my last ditch effort to get this printer working. Does anyone know why I can not print from my Windows 7 machine to a printer connected to my Ubuntu machine? Especially when I CAN print from the UBUNTU and Vista machines.
View 6 Replies
View Related
Aug 8, 2011
I've run into issue on my Linux machine (running 10.04) when I want to print. When I go to System>Administration> Printing, I cannot find the printer connected to the network through my dad's computer, running OS X 10.7.
View 4 Replies
View Related
Jun 30, 2010
I am currently running Lucid on my system and can't seem to get my printer on a Windows XP computer to print documents sent from my Ubuntu computer. I can see the Windows XP computer in Nautilus under Network and can even access the shared files on the Windows computer with no problem. I have been able to install the Windows shared printer on my Ubuntu computer using System>Administration>Printing>Add>Network Printer>"Windows Printer via Samba" without any error messages. The problem is that whenever I send a printing job to the shared printer, the printer acts like it is going to start printing then automatically stops just right before the paper is going to be fed. I have memorized the noises my printer makes right before the paper gets fed. That is how I know it stalls right before the paper is about to be fed.
When I check the print queue on my Windows computer, its status is "printing", but it never does. I have tried this with two different HP printers (Deskjet 3940 & PSC 1410), and it is the exact same problem on both.
View 1 Replies
View Related
Jun 17, 2011
We want to print PDFs from a Linux server to a HP LaserJet 1320 PCL 6 which is attached to a Windows print server.
The command we use is
lp -d LaserJet sicl_rcpdebtnt_5.pdf
Problem is, the printout comes with the top 10% of the page not printed. i.e. the printing starts from about 10% of the PDF. The header and top information is not printed.
We tried the scaling option:
lp -o scaling=75 -d LaserJet sicl_rcpdebtnt_5.pdf
But that also has no effect. Only the characters become smaller but still the same problem is there.
What can we do to print the entire PDF in ONE page. When we open the PDF in Windows and print it we have to say Fit to printer margins for the printer's page scaling property.
How to set this in command line Linux?
View 2 Replies
View Related
Sep 18, 2009
Centos 5 was set up for me on my server with VMware and XP SP3 as a guest. I have little to no knowledge of centos (or anything Linux) so i tend to leave well alone but i am trying to get a USB printer to work from my networked pcs through XP - Through VMware - Through Centos5 to the USB port on the back of my server. I am reasonably OK with XP but am not a techie so will probably need to be walked through this.
I can see the printer appearing on Centos' equivalent to device manager and when i print everything seems ok with the XP print queue clearing after a few seconds but nothing prints. At a guess i need some sort of software bridge- (is this SAMBA?).
View 5 Replies
View Related
Nov 8, 2010
When I was on Windows I used to be able to connect my laptop to a printer that was plugged into the computer downstairs via the wireless network. This network is still in place, only now I am using ubuntu I haven't got a clue as to how I connect to this network,or if it is even possible at all! how I would go about printing over the network when the other computers on the network are all windows machines.
View 3 Replies
View Related
Nov 25, 2008
I have a OpenSUSE 11 machine set up as a domain controller. I have set my printer up to be shared to Windows machines logging into the domain. I was able to install the printer to my Windows machines. When you go to the printers folder in Windows, it shows the printer but says "access denied" instead of the usual "ready". If I print to the shared printer the job will go through. I am thinking it is an authentication issue because if I log into Windows machine as "root" and let it build a profile, the printer doesn't show the "access denied" message. How do I allow other users to have access to the printer?
View 1 Replies
View Related
Sep 18, 2009
I have a Centos 5.3 server with Samba file shares and a shared Samba printer. I am not running a domain.
I recently changed my windows desktop pc from an XP machine to a vista 64 machine... It has a different user name. Everything went pretty smoothly - and the and the vista machine found the smba printer - and even downloaded the driver from the samba server. he printer works OK - and the file shares are fine.
The only thing which is quite odd - is that the Printer Properties dialogue takes more than 30 seconds to come up - and every action you attempt with the dialogue takes a similar amount of time.
I will include below the essence of my smb.conf:
View 3 Replies
View Related
Sep 5, 2010
I apologize if I'm a little wordy. I'll give the problem, then a detailed list of my setup (to help troubleshoot). Problem: I can't print from Ubuntu 10.4 on my Win7 shared printer. I also can't connect to the Win7 computer sharing the printer (probably a related problem).
Error Message:
1.) I click on Places, Network, Windows Network. I get an error that says "Unable to mount location, Failed to retrieve share list from server."
2.) I click on System, Administration, Printing, Add, Printer, Network Printer, Windows Printer via SAMBA, Browse..., and I get this error "No Print Shares, There were no print shares found. Please check that the Samba service is marked as trusted in your firewall configuration. To do this select System->Administration->Firewall from the main menu."
Network Configuration: I have a wireless/wired network (using a router) where the Ubuntu machine connects wirelessly and the Win7 machine connects wired. The Win7 machine is on a Win7 homegroup and custom named "workgroup". There is a username/password to log into the Win7 Machine. My other Win7 laptop connects just fine to the Win7 desktop's shared printer (and network drives). I know it isn't a issue of it not working (at least with other Win7 machines)
Problem: I'm assuming there is probably a setting in Win7 that needs adjusting (although I've looked at about everything I can find). I also don't know much about Ubuntu so it could very well be something I need to setup in Ubuntu. I checked already to make sure that SAMBA and the smbfs plugin is installed.
View 4 Replies
View Related
Aug 18, 2011
How can I get my MacBook running OS/X on my wireless network to recognize and print to an HP OfficeJet 6110 printer attached to a desktop workstation that's running Ubuntu Linux 11.04. It had no problems finding the printer when it was attached to a Windows machine, but you know about Windows...
View 3 Replies
View Related
Aug 26, 2010
so how can I locate a printer behind a firewall? Is it possible to enumerate the subnet behind a router ( even if a connection has not been marked)?
View 3 Replies
View Related
Sep 12, 2010
I set up a print server with a USB printer attached. I can remotely bring up CUPS and print a test page, but I would like to be able to add a printer in windows like I normally would. Add printer, network work printer and so on, but I am not sure how to implement this on Ubuntu server. Do I need to use IPP or do I have to share it out using Samba? Oh, my server does not have a graphical desktop, it is strictly console based.
View 1 Replies
View Related
Jan 3, 2011
When printing from ubuntu (zorin) to a hp officejet 5610 on a windows 2003 server, via samba, all I get is a Remote downlevel document on the print queue and nothing gets printed
View 1 Replies
View Related
Dec 22, 2010
I have a fresh install of CentOS 5.5. I am trying to browse to the Windows machines on my network (Places > Network Servers > Windows Network), but I get a blank window. I am able to ping the Windows machines using their IP address, but not by their name. What do I need to do to be able to see the Windows machines and also to connect to shared folders on these machines? So far I have tried starting SMB (via System > Administration > Server Settings > Services). I have also tried changing my smb workgroup to "WORKGROUP" (the default was mygroup which did not match my Windows machines.
View 8 Replies
View Related
Feb 20, 2011
I have a 64 bit laptop and i am using the 64 bit version of ubuntu 10.10. i am wanting to setup a lexmark x4650 printer which has wifi built in and can do wireless printing. i have the driver from lexmark installed but it is the i386 version which i know is the 32 bit version. and i know that 32 and 64 bit versions don't work so well together. i've gone through all kinds of help on these forums and for some reason when go to print a test page, it comes back with an error statement. i will have to try it again so i can post it verbatim.
i have a similar thread in the 64 bit thread so if it can be locked or deleted and have just this one, that would be cool. this same printer is not connected to any computer for it's wireless printing ability. it is a stand alone but all of my families laptops can use it since they have the software on theirs. they are using windows 7 which is what i have also, but i am switching to linux since i am not a fan of microsoft at all. i despise everything they do. i love linux and the community around it and i just want to get this printer setup so i can make the last and final switch. this is the only thing holding me up.
View 5 Replies
View Related
Jan 11, 2010
the remote printer appears in cups but if I try to do a test page i get a page not found error. it even says ready under yast printers.it is set up on a remote desktop using cups
View 8 Replies
View Related
Oct 19, 2010
I am trying to set uamsung clx2160N as a standalone network printer on my home network. It is a printer with standalone network capability and is connected directly to my router and has a static IP number. We have a few Windows computers at home and they had no problem detecting the printer, installing the drivers and working. Unfortunately my Ubuntu computer recognises the printer and I can even access it's setup and diagnositcs through its IP number. However when I try to add it as a printer, drivers for it cannot be located. #ve tried setting it up three ways:1. Using Samsung's own setup package - finds printer and all the details it needs to work but offers no drivers2. Using Ubuntu's printer setup - recognises printer but stalls at Searching for Drivers dialog3. Trying to *** printer using CUPS - no problem finding and recognising printer, but when I come to search for the driver I get Internal Server Error.
I have of course been trying to do all of these as root. That's the limit of my knowledge reached and searches on the net aren't helping me either. The printer works fine directly connected via USB, so the drivers are on the computer somewhere. How do I get them set up to use the printer on the network?
View 3 Replies
View Related
Dec 28, 2010
I have been able (with some hair pulling and gnashing of teeth) to print from outside the LAN to the printer connected via USB to the desktop computer at home, until the last upgrade. The laptop will forst say the printer may not be connected, but eventually (usually) after a while says the job was sent to the printer. The log files on the desktop - serving as the printer server have an error message in cups/error_log that I am not familiar with, and don't believe I have seen before. I am sure if I could decipher that error and figure out how to change the behavior to get rid of it, it would once again work. Printing from within the LAN is a no-brainer as it has been for the last several releases. The error that I get when trying to print outside the LAN (via the internet) is:
cupsdAcceptClient: 12 from <WAN IP>:631 (IPv4) Unable to encrypt connection from <WAN IP> - GnuTLS internal error. I am missing something as far as authentication from the laptop to the desktop. how to fix it.
View 1 Replies
View Related
Mar 30, 2009
I have been trying to set up printing on my Fedora 10 machine so I can print with a remote printer on my LAN that is attached to a Windows XP machine. I went through the whole configuration process, selected a samba printer, put in the correct UNC and driver- it is an HP psc series 1210, the printer was detected when I selected browse during the configuration process so I know I've entered the right UNC. When I try to print a test page or anything for that matter the printer starts as if it is going to start printing but nothing happens. When I go into printer properties it tells me that I have a Remote Downlevel Document and that it is printing but nothing is happening. I've tried restarting the print spool service but nothing works.
View 2 Replies
View Related
Jun 7, 2011
I am attempting to connect a CentOS VMWare VM to a networked Brother HL5170DN printer. The printer is located at 192.168.0.101. It is available and I can connect to it with various Ubuntu and Windoze VMs.
I have searched for instructions on how to do this and it SEEMS rather simple. However, it does not work. Here is what I have done:
System; Administration; Printing to launch the printer configuration wizard
supply root password New Printer Provide printer name, description etc. Select Connection - LPD/LPR Host or Printer Hostname - 192.168.0.101 supply a printer name again select Brother HL5170DN BR-Scripts3 from the footmatic database complete creating the printer
The printer appears as a local printer, however, I cannot print a test page. Nothing happens when I click the button to print a test page. I can ping the printer by IP address. So I deleted the printer and tried again.
At the screen which asks for Hostname and Printername I entered the printer's IP address in Hostname as I had done before. I then clicked the Probe button. At this point Printer configuration freezes and I have to do a force quit.
I just tried the same thing on a physical CentOS 5.6 box - just in case the problem was a VMWare thing. Same symptoms. Probe freezes the Printer configuration program. I then recalled that the printer uses port 9100. I opened 9100 on the firewall (I think) but no improvement. I temporarily disabled the firewall and went throug the proces. I now have the printer defined at "socket://192.168.0.101:9100" and recognized as "Brother HL-5170DN BR-Script3"
I still cannot print a test page. I tried to print from gedit and it shows the printer with 1 job in the queue. The gedit print bumped that to 2 jobs in the "printing" state. Looks like I am communicating with the printer. Just not printing.
View 5 Replies
View Related
Nov 7, 2010
I'm running Mint 9 as my main network and my wifes Acer Aspire 5610 running Windows vista. My problem is that I can't print from vista. It prints a test page just fine but when I tell it to actually print a document, the status says: "Access denied, unable to connect" I have 2 printers connected and they installed fine in Vista one is a HP LaserJet 2100 series and the other is an HP Photosmart C5280. Like i said, they both print the teat page just fine.
View 9 Replies
View Related
Feb 1, 2010
I'm trying to add my Samsung SCX4500W printer to my opensuse 11.2 machine running KDE.From Yast->Printer->Add printerI am able to set the printer up, however there is no driver for my specific network printer. Samsung does provide a linux driver but I have no idea what I'm doing when installing peripherals on linux basically
View 3 Replies
View Related
