General :: Set Printer Options When Printing From System To Windows?
Jun 17, 2011
We want to print PDFs from a Linux server to a HP LaserJet 1320 PCL 6 which is attached to a Windows print server.
The command we use is
lp -d LaserJet sicl_rcpdebtnt_5.pdf
Problem is, the printout comes with the top 10% of the page not printed. i.e. the printing starts from about 10% of the PDF. The header and top information is not printed.
We tried the scaling option:
lp -o scaling=75 -d LaserJet sicl_rcpdebtnt_5.pdf
But that also has no effect. Only the characters become smaller but still the same problem is there.
What can we do to print the entire PDF in ONE page. When we open the PDF in Windows and print it we have to say Fit to printer margins for the printer's page scaling property.
I'm running Fedora 11 and printing to both an HP Laser Jet 4Plus and HP Office Jet 7130 via a Windows 7 PC. I have a UID/PWD account on the PC that differs from that on the Fedora, also one that is identical UID/PWD to that used in Fedora. This has worked fine until "recently" (noticed it in ~last week or 2). Suddenly I'm being asked repeatedly to authenticate to print, neither account credentials are working. I get the message "Tree connect failed (NT_STATUS_ACCESS_DENIED)" and I get nowhere. I tried delete and reinstall the printers in Fedora, that works OK, can "see" them in setup on the Windows 7 host just fine. But can't get past the repeated authentications ...? I'm guessing something has changed in Fedora updates because this used to work with same Windows 7 PC in prior weeks.
I have a windows machine on my lan with a printer attached. I have samba running on my F11 laptop and I can use it to access shared files on the windows machine. But how can I use the printer from fedora? When I go to Administor>Printers then I just get an empty list, even after pressing 'rescan'. Do I have to change some firewall/samba configuration? If not then where else would I see the printer?
I want to print from my linux box to my win7 pc that has a shared printer. I have cups installed and tried to add pritner using samba, but was unsuccesful, gave me an error when trying to add. The guide i followed is: Yet another Linux to Windows printing tip -- Debian Admin The printer model is a dell 2330d laser printer, it is not in cups, so i added the ppd file i got off the dell support site. I am aware that there is a native suse driver, but i want to print to the windows printer.If possible I would like to know how to do this via command line instead of the GUI.
I am currently running Lucid on my system and can't seem to get my printer on a Windows XP computer to print documents sent from my Ubuntu computer. I can see the Windows XP computer in Nautilus under Network and can even access the shared files on the Windows computer with no problem. I have been able to install the Windows shared printer on my Ubuntu computer using System>Administration>Printing>Add>Network Printer>"Windows Printer via Samba" without any error messages. The problem is that whenever I send a printing job to the shared printer, the printer acts like it is going to start printing then automatically stops just right before the paper is going to be fed. I have memorized the noises my printer makes right before the paper gets fed. That is how I know it stalls right before the paper is about to be fed.
When I check the print queue on my Windows computer, its status is "printing", but it never does. I have tried this with two different HP printers (Deskjet 3940 & PSC 1410), and it is the exact same problem on both.
Trying to add printers to a new install, and system-config-printer doesn't start. CUPS is working, and I am able to add and manage printers using http://localhost:631, but I would prefer to use the applet.
Code: lee@tycho:~$ system-config-printer Traceback (most recent call last): File "/usr/share/system-config-printer/system-config-printer.py", line 104, in <module>
[Code]....
Similar problems (possibly different causes) include [URL], from only three weeks ago, but no responses, and this one [URL], which I don't think is the issue because I don't seem to have an "extra" python install at /usr/local/bin/python.
I have a virtual Linux box with a static IP in the cloud.
I have remote sites that have networked PCs that normally act as terminals but also have more than one printer on the Windows Network.
I would like software on the Window's machine to access the known IP address of the server and advertise the printers on the network so they can be printed to with lpr or cups. I don't have a problem manually setting up the printers on Centos if that is necessary. (But I need to know how to do that as well).
I need to know if I can setup a VPN on Windows without it stopping regular internet traffic and how to do it.
I need to know all the steps (what to install, what to issue commands for) to make this happen without using a GUI if possible and if the GUI is easier I need to know which GUI to install.
I also do not have a problem with using a VPN router at the client side if that makes it any easier. Like a Cisco RV120W.
I have a OpenSUSE 11 machine set up as a domain controller. I have set my printer up to be shared to Windows machines logging into the domain. I was able to install the printer to my Windows machines. When you go to the printers folder in Windows, it shows the printer but says "access denied" instead of the usual "ready". If I print to the shared printer the job will go through. I am thinking it is an authentication issue because if I log into Windows machine as "root" and let it build a profile, the printer doesn't show the "access denied" message. How do I allow other users to have access to the printer?
I need to add those in my ubuntu system so that i can do printing from remote machine. so what i m doing is System-administation-printing then m clicking on the desired share then after when i click on verify its asking me for username and password. So just confirm me one thing do i need to add my username to windows machine, apart from that i also need to do any changes in samba config files.
I'm running Red Hat Linux and CUPS 1.2.4. I can print a test page to a Win 7 shared printer ok. However, when I issue the lpr command from a user or root, it won't print. The CUPS message is "Remote host did not accept data file (1)" and the job just hangs till I cancel it. The only thing I can tell that is different is that when the test page from CUPS is generated, it uses user "guest". When I try to print it using the lpr command, the user is "eddie" or "root". I tried adding a user account named "eddie" to the Win 7 box, I can print successfully from both CUPS and users on several other Win XP boxes.
After some effort, finaly managed to get my Canon PIXMAiP4200 printer connected as a network printer. (I connect it through the USB printer port on a DLink DI-524UP router) Everything seems ok so far, except that I cannot find any means of specifying that printing should start from the last page.
Centos 5 was set up for me on my server with VMware and XP SP3 as a guest. I have little to no knowledge of centos (or anything Linux) so i tend to leave well alone but i am trying to get a USB printer to work from my networked pcs through XP - Through VMware - Through Centos5 to the USB port on the back of my server. I am reasonably OK with XP but am not a techie so will probably need to be walked through this.
I can see the printer appearing on Centos' equivalent to device manager and when i print everything seems ok with the XP print queue clearing after a few seconds but nothing prints. At a guess i need some sort of software bridge- (is this SAMBA?).
I am trying to install a HP deskjet 1000-J110a. I downloaded a driver package thing, and I guess I unpacked it, and I made it, and I thought I installed it. I am totally confused and my brain hurts. The printing troubleshooter is telling me: Missing Printer Driver
Printer 'Deskjet-1000-J110-series' requires the 'foomatic-rip-hplip' program but it is not currently installed. I found something that is the 'foomatic-rip-hplip', but what the heck do I do with it?
I installed Ubuntu for net book 10.10 with partition from USB port. after installation, I cannot find my windows files. The system is not showing me options to boot from windows 7 at the start up. How can I get my files please.
Whenever I want to print from Libre Office, it's default printer options are somehow set to duplex long edge (standard) and the print quality is set to economy. I want this changed to Duplex Off and print quality set to standard. I've tried setting Libre Office's printer settings (File > Printer Settings) and when that failed, I went to File > Templates > Organize > Commands button and selected Printer Settings and changed them from there. None of these worked.
Whenever I open a document, the print quality is always set to economy and duplex is on (even when it is not needed). I have to keep changing it each time I print a document. I allow my children to use this computer for homework at times and I don't want them to have to mess with the driver settings all the time (more of a chance for something to go wrong or be set incorrectly). I've also checked the printer settings from within YaST and they are all ok.
I did try changing the settings from within the CUPS interface but when I did that, I could no longer print. The system couldn't connect to port 631 anymore and I had to go into YaST again to make it reconnect to the printer port. BTW, when I looked just now at the default printer settings within CUPS, everything seems to be set right, duplex is set to off and print quality is set to standard, which is what I want. Why does Libre Office seem to be ignoring these settings? How can I fix this (easily I hope)?
I managed to print from fedora without rebooting into windows.
--installed rpms provided by canon --installed cups --logged into cups --selected my printer (ip2770) --printed a page--and bang! too dark!
In cups, or on the computer, I only have one option, 600 dpi, which I'm assuming is why it is so dark, ugly, and nothing like it needs to look like This whole process (which is way over my head) put two printers in my printer set up, both called ip2700 series, and I'm not sure which should be the default. I am thrilled to be printing now from linux, but not happy with the quality.
I'm having a hard time trying to print documents to PDF via cups-pdf at the command line and get all of the nice formatting options that the GUI print spooler dialogs provide. I know how to do "lpr -P Generic-CUPS-PDF-Printer filename" to get a general file printed to a PDF, but this method clearly is missing all of the nice formattingptions that get passed when using a GUI print spooler (margins, fonts, dpi, paper size, etc..). I tried to use ps to capture whatever command is being sent by the spooler but couldn't figure it out, since I'm not really sure what commands get called by the spooler
I am using the latest version ubuntu desktop 10.04 LTS. I am trying to add printers attached to a Windows 7 system. I can see the Windows system but I can't see the attached printer. I log on as required after I change the domain to the appropriate workgroup that the Windows system belongs to. The log-in seems to be unsuccessful. Do I need to change the ubuntu desktop system to the same workgroup? If I do, please tell me where I can change?
I've just checked. I don't seem to be able to access any shares on any Windows systems on the network including the Windows system on the same computer where this ubuntu is installed. I installed ubuntu using wubi, so it is an application inside Windows system.
I'm having trouble with printing a PDF that is in landscape mode. When I tell Okular or Adoble Reader to print a document in landscape mode, the text is Illegible. If I tell it to print as portrait mode, then I can read the text but the end is cut off and there is no way for me to tell Okular or Adobe Reader what the margins are. That option was grayed out.
I'm having another problem: When I cancel the job from the CUPS interface, it says it canceled the job but the printer keeps going and finishes whether I want it to or not. With 11.2, I was able to have it set up so that when I told it to stop the printer, it did so right away. Why can't I get the printer to stop in the middle of a job if I see something wrong with it so that I don't have to waste ink?
How do I stop a printer from printing? Here's what happened- I started to print some PDF stuff and then changed my mind. The printing job hadn't finished so I just clicked on the printer icon and selected QUIT. Well, of course that didn't work so I just turned the printer off......same result- when I turn the printer back on it keeps on printing the same stuff. How do I stop the printer from continuing and delete all print jobs?
I have not been able to print from my PCLinux box through my Windows machine (printer connected and working on that machine).
There are shared files on the Windows machine that can be seen with PCLinuxOS and accessed. PCLinuxOS can supposedly see the printer, but will not print a test page.
Is any one distribution of Linux, particularly suited for color management and printing? I have alot of photo printing to do that needs to be accurate color wise, I have already installed Open Suse with Gnome to try Linux, on an old machine and the printing although good, is very slow...
I have installed an HP LaserJet 2200 network printer using CUPS successfully and can print test pages and stuff from OpenOffice, Evince etc. But no luck printing from lpr. Using lpstat seems to suggest all is well:
$ lpstat -t scheduler is running system default destination: HP-LaserJet-2200 device for HP-LaserJet-2200: socket://192.168.10.42:9100 HP-LaserJet-2200 accepting requests since Tue 19 Oct 2010 14:01:50 NZDT printer HP-LaserJet-2200 is idle. Enabled since Tue 19 Oct 2010 14:01:50 NZDT Ready to print.
If I now try to print 'test.txt' using: $ lpr test.txt nothing happens. Try calling the printer by name: $ lpr -P HP-LaserJet-2200 test.txt lpr: HP-LaserJet-2200: unknown printer
I have added my user name to the lp and lpadmin groups. Trying the above as 'sudo' results in the same result. The only thing I've noticed is that when printing something from OpenOffice, in the document print status I get the message 'Processing - not connected?', although printing still works.
In December I finally filled up my root partition and broke Suse 11.1. I therefore resized my partitions and installed Suse 11.3 on /root. I didn't not touch my /home partition.
Last week I had a paper jam in the printer. This has been cleared and as far as I know the printer is now fine. However the printer will not print. In url, it says printing has been paused, but I cannot find resume printer/printing anywhere.
I have tried Google, but the instructions do not appear to match where I would find 'resume printer'.I am able to provide further information.
I have an HP C4795 printer and lately when I print something nothing happens until I reboot and then the printer will print. How can I fix this problem? This was printing from Okular pdf reader.
I am not sure if this is the right place for this or not, but I am having a problem getting my HP6300 series all in one printer to print photo's with proper colors, all colors seem to run. I have hplip installed and set up to print photo's and it still prints colors like runs instead of correct.
I have a brand new Canon MF4350d printer/copier/fax/scanner installed and shared on XP that I can't get working on Ubuntu!
XP prints test pages fine. Ubuntu sees the XP shared printer, it sends print jobs, and the XP machine even receives the print jobs (I can see them "spooling" in the XP print manager) but then nothing happens. The job leaves Ubuntu showing 150k but then shows 50 bytes when received in XP before disappearing from the queue.
How I got to where I am...
There was no native driver in Ubuntu for the printer, so I downloaded Canon linux drivers source and compiled (including make install) based on some other threads I've found such as this one.
Compiling left me with PPD files that seem to be specific to the MF4350, although their names show MF4350z not MF4350d. I'm not sure why there were three different files with slightly different names (CNCUPSMF4350ZJ.ppd, CNCUPSMF4350ZK.ppd, and CNCUPSMF4350ZS.ppd).
I added the printer manually using the Ubuntu printer browser setup (Samba) and selected the .PPD files manually. I've tried all three different .PPD files to no avail.
I've toggled bi-directional comm. and tried different print drivers on XP. Nothing's worked yet.
Been using ubnutu gnome for a loooong time and my printer (Canon MX340) has been running just fine, configuration and usage.
I now switch to kde. configure my printer the same way i would under gnome and as soon as i send a job, it processes for about 3 seconds and just marks "stopped" under status. nothing goes through anymore!!
i've updated from 4.5 to 4.6 with backports and nothing is happening on there either.
im running maverick amd64 and using the i386 drivers (with dpkg -i --force-all) which are still recognized even under kde.
p.s.: the printer normally runs as wireless standalone (no samba/cups involvment whatsoever)
