SUSE / Novell :: Install A D-Link Access Point On Suse 11.0?
Sep 16, 2010
how to install a D-Link Access Point on Suse 11.0 or steer me toward documentation that will do that? I configured the device on XP following instruction from this forum and the AP configured perfectly.The AP is plugged directly into the network port on the computer. It *should* function correctly without a router. I tried a restart and Suse has no idea it's there. The computer is currently configured for a wired connection which needs to be changed. The computer itself is going to be used as a small home storage server.
View 3 Replies
ADVERTISEMENT
Jul 20, 2010
I intend to re-install open suse 11.2, 32-bit. On a previous install,suse did not provide a grub entry for ubuntu.My current setup has
ubuntu/root on /dev/sda6
ubuntu/home on /dev/sda7
ubuntu/usr/local on /dev/sda8
[code]...
View 4 Replies
View Related
Aug 23, 2010
I've pre-partitioned my HDD and want to install 11.2 on the second primary partition.However, when using the installer, I can't get Suse to install on the prepared 20gb partition - it keeps insisting it wants to install on the large unallocated section of the drive.
I find the partitioner somewhat hard to use and the answer may be staring me in the face but I can't see it.
View 2 Replies
View Related
Feb 1, 2010
I tried to use different version of Python, and followed the Readme like this
./configure
make
make test
[code]...
View 3 Replies
View Related
Nov 18, 2010
I've got several language multimedia CD-Rom's, made for Windows 95/98/98 SE and 2000, that I'm using by means of my daughter's old PC (Win 98 SE O.S.). However I noticed, also, that you can perfectly use them even with Windows Vista. What I'd like to know is if you can use them even with Suse/Novell and (why not?) OpenSuse Linux.
View 4 Replies
View Related
Jul 5, 2009
OK... I tried everything i could think of... but i still cannot get my Open SUSE 11.1 to mount my samba share at boot! I still don't understand the 11.1 boot sequence. can NE one help me... tell me what files to give you output from... Ty guys P.S. My shares originate from a Windows Server 2003 RC2 machine, and it's dns server doesn't work correctly... so my mount command is
mount -t //192.168.x.x/files/ /nET/ -o username=linux,password=xxxxxx
please let me know what other info you need... I don't have the internet, so it will be tommorow b4 i see this again!!! Thanks
View 2 Replies
View Related
Sep 8, 2010
When i am adding a user using "useradd -d /home/test test" or "useradd test", it is now creating the home directory, whereas when i am using the graphical mode and going through several menu options, i am getting the home directory.
View 1 Replies
View Related
Nov 4, 2010
I have a disturbing problem with my monitor which goes to sleep (or ??) after few minutes if my comp is not used and most of the time I have to restart my comp.I disabled everything in Powersave , but nothing. I did have that problem in previous versions of SUSE, but somehow, I solved that. I cant remember what I did then.
View 4 Replies
View Related
Oct 13, 2010
PackageKit Error repo-not-available: File '/repodata/repomd.xml' not found on medium 'http://download.opensuse.org/repositories/KDE:/KDE4:/Community/openSUSE_11.2/' My 11.2 won't update and gives this error. Anyone know how to fix it?
View 2 Replies
View Related
Jul 19, 2010
New Suse 11.3 installation with Gnome desktop. Added K3B using Yast2, and after completing the install of K3B, there is no icon for K3B! Instead there is an "X" and the text for K3B in it.From the main menu -> more applications -> multimedia, is where the K3B icon is.Yast2 is supposed to install any dependencies needed or warn if it can not find any missing dependencies. What is missing, or is it a permission problem? All the other application icons seem fine.
View 4 Replies
View Related
Dec 2, 2008
I have a usb port problem. I am trying to set up printers to usb port. When II have setup printer to connect to usb. When I test connection, it prints. Any other part of printer setup, shows up in the Que, but will not test print.Seem that my usb port does not have permissions set up properly. How do I set up permissions and keep them setup?
View 7 Replies
View Related
Feb 4, 2010
The software use to work well here, but now I got this when I try to run it
sparky: error while loading shared libraries: libtk8.4.so: cannot open shared object file: No such file or directory
But I can not find it.
I also tried
cd /usr/lib
ln -s libtk8.4.so libtk.so.0
ln -s libtcl8.4.so libtcl.so.0
but this does not work neither.
View 4 Replies
View Related
Nov 25, 2008
I have a OpenSUSE 11 machine set up as a domain controller. I have set my printer up to be shared to Windows machines logging into the domain. I was able to install the printer to my Windows machines. When you go to the printers folder in Windows, it shows the printer but says "access denied" instead of the usual "ready". If I print to the shared printer the job will go through. I am thinking it is an authentication issue because if I log into Windows machine as "root" and let it build a profile, the printer doesn't show the "access denied" message. How do I allow other users to have access to the printer?
View 1 Replies
View Related
Mar 22, 2010
I am using open suse 11.0 with gcc 4.3.2. I am compiling a program which requires libg2c. Where can I find libg2c and how to install it?
View 8 Replies
View Related
Mar 15, 2010
So I have tried to install from LiveCD and from a LiveUSB stick. Installation goes fine till I get to CUPS daemon. Then I get the wait 30 seconds for CUPS to activate, that never works. Then it pops up with a wait one minute for CUPS to become available. Then it finishes the installation and restarts the system and I get previous installation has failed would you like to retry? It does this over and over again till I get an error with my user name and the mouse and keyboard quit working. I have tried in Failsafe mode, No ACPI, etc. and nothing seems to work. I don't know if it matters but I have an Asus mobo M4A785-M and an AMD Athlon II x3 440 chip. I am just ready to switch to Ubuntu
View 14 Replies
View Related
Jan 22, 2010
I've an HDD with a dual boot of XP and Mint Linux. It works well. I'd now like to add OpenSUSE 11.2 but if I accept auto partition it seems to want to overwrite the Mint partitions which I assume are sda5 and sda8. So how should I proceed with manual install as I have the following large number of existing partitions:
[Code]...
Should I resize sda3? can I use sda8 as /Home for both Mint and OpenSUSE?
View 10 Replies
View Related
Jun 23, 2010
Need to install Novell SUSE Linux version 11 from Different computer DVD ROM over Network.
View 1 Replies
View Related
Sep 21, 2010
I have a Toshiba Satellite Pro laptop with the following specifications:Proccesor: Intel Core i3 350M / 2.26 GHzRAM: 4GB DDR3Hard Disk: 320GB SATA 5400rpmArchitecture: x86_64The computer has already Windows 7 installed on the C drive whereas there's a D hidden drive with a copy of the recovery image.I'm having trouble to install openSuSE 11.3 as follows:I boot the system with the DVD in its drive. After the welcome screen the process stops
using the typical GUI interface and runs a less graphical one. It is at this point where a
window pops up with a request:"Make sure that CD number 1 is in your drive"I press OK but the window keeps popping up. Frustrated I hit Back and a red window comes up with the message:"No repository found."I cannot go any further than this point
View 4 Replies
View Related
Mar 23, 2010
Can anyone provide a guide on how to install cuda drives for opensuse 11.2 64 bit?
View 1 Replies
View Related
Jul 31, 2010
I have LG usb net setter, i want to install it on Linux Suse 10, anyone can give me the installation process for USB Netsetter.
View 1 Replies
View Related
Nov 23, 2010
I have downloaded tarballs of gpg2 (gnupg-2.0.16), compiled it, compiled dependencies etc. and have it installed on my Suse 10 box. Now I want to install it on another suse 10 box. Instead of doing the compiling/installing steps once again, is there a good way I can package gpg2, or tar it on my server, so it can be easily installed on the other server? Also, when I installed gpg, it was installed everywhere, /usr/local/lib, /usr/local/bin, my download dir etc. How do I pick the needed libraries and executable to make the package? maybe I Should specify a path for the gpg to be installed, then tar the whole directory. how to do the first part?
View 1 Replies
View Related
Dec 23, 2009
I'm installing OpenSuse 11.2 on some systems. Unfortunately the only mouse available is a serial mouse. Hence the installer doesn't recognize the mouse.And it is somewhat cumbersome using the TAB and ARROW keys to navigate the graphical installation.Does anyone know of a boot option I could use to get OpenSuse's installer to recognize a serial mouse ?
View 5 Replies
View Related
Jan 22, 2010
Installed Suse 11.2 from download CD. During the "answering questions" at the beginning of the process, selected Gnome as the desktop enviornment instead of the default KDE. The install process ended with no reported errors. After the final reboot at the process's end, the Gnome logon screen was displayed. After the user name/password were entered, a medium green screen was displayed, but the Gnome desktop was never displayed. The "animal" logo was not on the screen just the green screen and some "filagree" lines, probably part of the logo.
Waited a few minutes, mouse-clocked, pressed various keys and then tried ctrl-alt-del, but no response. Did a power off/on reboot, but the results were the same.
I then did a re-install. Took the KDE default for desktop. At install's end, the KDE desktop appeared and everything works just fine. During this second install, all choices were the same as for the first/Gnome install. Worked from written notes, and not from memory, so am sure that the change to KDE was the only difference.
Couldn't find any information on this anomally via forum and Google searches, hence this post.
This is my first time to use Suse, so could well have "missed something".
View 3 Replies
View Related
Jul 3, 2009
How to recover from a failed OpenSUSE install. The situation is that I have a striped RAID set up on two 500Gb drives running Windows. I wanted a dual boot setup, and I tried to install OpenSUSE but it failed with a Grub error 18. This, I understand, is caused by my BIOS not being able to access the part of the drive with the /boot on. Because I have two 500 Gb disks, the OpenSUSE /boot partition is beyond the BIOS's addressing range.
The recommended solution seems to be to put the /boot at the start of the HDD - but then I'd need to move Windows after it somewhere. But I don't know how to do that and it seems a risky, longwinded business. I've given up on the OpenSUSE install. My problem is that the failed install has grabbed about half of the diskspace for its purposes. Question therefore is: how can I reclaim that space for Windows?
View 1 Replies
View Related
Nov 2, 2010
I downloaded a live KDE-CD and will install from that on hard disk. My box has 4 GB RAM so I understand I need a *-pae kernel ("Physical Address Extension") to be able to use the memory fully.
Can I install the kernel e.g. from [URL] via YAST, or does it need other libraries / software as well and so the system becomes unstable, would anybody know?
View 9 Replies
View Related
Aug 25, 2010
I have an Intel MB (855GME with 6300ESB) that I'm having trouble installing OpenSUSE 11.1 onto the IDE drive. It will install to a SATA drive but for various reasons I need to install on IDE (PATA on 6300ESB). The install fails to find any ide drive (I know the drive/interface works because I can install XP on this same ide drive and boot from it). If I parse the dmesg output I see the message "ata_piix 0000:1f.1 device not available because of BAR 2 (0x0-0x7) collisions". I'm trying to determine if there's some workaround for this. I've tried various kernel parameters and no joy.
I've tried Ubuntu with similar results. Older kernels WILL install onto this same MB/PATA controller (Ubuntu 6.06, 2.6.15 and RHEL4) so it seems that something changed in the ATA driver as the kernel has matured and my bios isn't up to snuff for these pickier drivers.
View 2 Replies
View Related
Aug 3, 2010
I'm trying to install kweather in 11.2. I have downloaded and installed. I can find it in usr/bin and usr/lib but I can't add an application as in 11 or 11.1. It doesn't show up in the list of apps. It's there but I can't get it on the desktop.
View 14 Replies
View Related
Jan 9, 2009
I accidently removed bottom panel of suse 11.1.Please be so kind to help me to get it back my bottom panel.
View 6 Replies
View Related
Dec 29, 2010
OpenSuse 11.2 This link shows that gdb-7.2-61.1.x86_64.rpm is the latest version of GDB, but when I do: zypper install gdb, the version 6.8.x gets installed! The following result is after forceful refreshment:
Code:
linux-uitj:/home/anisha # zypper repos
# | Alias | Name | Enabled | Refresh
--+-----------------+-----------------------+---------+--------
1 | KDE:KDE3 | KDE:KDE3 | Yes | Yes
2 | X11:lxde | X11:lxde | Yes | Yes
[code].....
View 4 Replies
View Related
Feb 9, 2011
I'm trying to install a GeForce 8600 XT card into novell Open Enterprise SUSE 11 so that I can get the 3D Cube to work. It currently does not work with the default nvidia card onthe motherboard.I can not find the correct driver for the GeForce 8600XT card. Can someone identify the driver I should be using please? Then if someone could also direct me to the "How to install a Video Driver" tutorial,
UPDATE:I've downloaded the correct drivers but it still says that my hardware does not support Desktop enhancements etc ... I think the GeForce 8600 XT just doesn't support 3D accelleration ... period.Can someone suggest a reasonably priced video card that is easy to install and which supports 3D Accelleration please?
View 1 Replies
View Related
