Fedora Networking :: Xp Can Ping 10 - But Can't Ping Xp
May 21, 2009
I have connected xp and fedora through crossover cable . xp has ip address 192.168.0.1/24 (manually assigned) fedora has 192.168.0.2/24 with default route equal to 192.168.0.1
I can ping fedora from xp computer but i can't able to ping xp from fedora computer.
I have manully edit the /etc/sysconfig/network-scripts/ifcfg-eth0 file with correct subnet mask and ip address because when i tried to give ip address manully in network manager the subnetmask is replaced with gateway address don't know why.
Now i want to share internet through crossover cable . xp is connected to internet through wireless usb adapeter.
I am using an virtual machine. where I need to ping from one machine to another. earlier I was able to ping. But after going to google.com once, I cannot ping back to this machine.
But if I gave ping -I eth1 <IP> then I can ping.
I cannot install any package, so tell me solution which includes not installing any package.
I have two machines on this network, one running Ubuntu and the other running Fedora.
When I'm using the Wireless network on the Ubuntu machine, I cannot ping the Fedora machine. Everything else works. I can browse the net fine.
If I switch over to the Wired Network then I can ping the other machine.
I don't understand why ping doesn't work only over the Wireless. I can ping the router so I'm guessing it's getting blocked by the router but I didn't block ICMP traffic.
I tried asking on IRC and they ran out of ideas too to find out where the problem is.
I just installed my first EVER bind DNS server. I am running bind9 on Ubuntu 10.04. Everything seems to be working great except one thing: If I ping a host that I have set up in bind by its HOSTNAME the pings take 5-6 seconds to reply/print to the screen between each echo response. If I ping by the host's IP address, they echo back very quickly.
I have read that IPv6 can cause this, but I have disabled it in /etc/sysctl.conf and the problem still exists.
I know everyone says this can't be a DNS issue, but this never was an issue with dnsmasq (which i was using prior), and it doesn't make sense that the ping are ONLY slow when pinging by hostname and not IP.
Configs below:
Ping by hostname - there is a 5-6 second delay between each one of the responses:
Code:
Ping by IP - the responses come VERY quickly one after the other:
So, I have an Virtual Machine running CentOS 5.4. It sits behind a hardware firewall which also does NAT'ing. I've set up plenty of these, so I know for sure the firewall and NAT rules are set up correctly. From the host, I can ping anything in my subnet and the gateway. But I can't ping anything else beyond the gateway. I can perform DNS queries and when I try to ping, it finds the appropriate IP address.But from the outside, I can ping the PUBLIC address (It's a 1 public to 1 private address NAT, not 1 public to multiple private). I've tried it with IPTABLES on and off, with no change.
I have Mandriva One 2009.0 (192.168.1.100) on one box and Mandriva Free 2010.0 (192.168.1.118) on the other. I can ping router (192.168.1.1) from both of these boxes but I can't ping one box to the other and the other way around. What's going on?.
Do I have to change some settings in router?. Or is it firewall issue on those two machines?. Both of these boxes are connected by cable. Symbol of the router: TL-WR340G.
I try to ping with php : exec("ping -n 1 $ip",$output[],$retval); it works fine in window. but in linux i got this error : ping: icmp open socket: Operation not permitted are there any ways to solve this ?
This applies to my 2 opensuse PC's, my Windows PC is fine.I can ping a hostname, say "PC1" but I can not ping PC1.domain.local (even the host PC can not ping it's own FQDN). When I ping just the hostname the ping stats even list the FQDN.Onto the next issue, since all my PC's, have the domain prefix domain.local, my Synology can not. I can ping it's IP and that is it. I can resolve it's name with nmblookup just fine tho and that is what is killing me. How is this not resolving.Even weirder, I can browse to "Synology" in Network Servers under places on the slab.
I have a debian server installed with a static ip. Now i am able to ping my ip, but when i try to configure a domain name with the nameserver as my ip, i am not able to ping the domain name
I installed nss-mdns in Fedora Core 10 and can see all the Bonjour published hosts on the lan. However, I am always forced to append the .local domain when referring to a host:
For some reason some command line commands are unable to resolve urls, whereas other commands work as they should. I have checked most setting but am unable to find out what is wrong and am no closer to figuring out what and why.
[root@subzero ~]# yum update Loaded plugins: refresh-packagekit [URL]: [Errno 4] IOError: <urlopen error (-2, 'Name or service not known')> Trying other mirror. Error: Cannot retrieve repository metadata (repomd.xml) for repository: atrpms. Please verify its path and try again [root@subzero ~]# .....
My ISP (Insight if you know them) says I had open ports. OK I did! Shame on me! I'll blame my $15.00 router but I know it's my fault. OK took care of that.But when I run Shields Up from grc.com it keeps telling me it can ping (IMCP) me. I tried to get the firewall to stop, or drop the ping and it seems to on my local network, I can't ping my my boxes locally and I can't even ping my router. But Shields Up keeps telling me it can ping meAny one know how I can see what's sending the ping, or I guess they call it the pong, back to echo the ping?
I have been beating my brains out the last few days trying to get my linux box to ping my Pc's via the netbios name. (ping pc_name) I have read post after post with no luck at all. What i do know is that my pc's can ping the linux box via netbios name with no problem. Samba works from the pc's but not the other way around. I have added wins to my host in the nsswitch.conf fileMy smb.conf file:Quote:
global] workgroup = OFFICE server string = Samba Server Version %v
$ uname -rsmi Linux 2.6.33.8-149.fc13.i686.PAE i686 i386
I am using a dhcp network. Problem is I can SSH/ping to my machine but can't SSH/ping to my machine from the remote one(In internal network of my lab). What to do? I understand this is very little information....but I dont know what to provide.
Have installed fedora 14 on a HyperV virtual machine, have added a Legacy network adapter in the Hyper-V settings for this virtual machine that fedore pics up as eth0. I'm pretty sure this card is able to pick up an IP address from a DHCP server on our network but I'm unable to ping any boxes from this fedora virtual machine or ping the fedora machine from another box on the network. I have tried to disable the firewall and SELinux incase it was that stopping the pinging each way but that didn't help.
Not sure what iis going on, I can ping some hosts on the internet but not others see below (adobe is not the only example) Works OK from another host on the same network with same GW and DNS iptables is turned off
[root@havoc init.d]# ping www.arrl.org PING www.arrl.org (184.106.62.248) 56(84) bytes of data. 64 bytes from www.arrl.org (184.106.62.248): icmp_req=1 ttl=55 time=94.1 ms 64 bytes from www.arrl.org (184.106.62.248): icmp_req=2 ttl=55 time=93.0 ms 64 bytes from www.arrl.org (184.106.62.248): icmp_req=3 ttl=55 time=99.4 ms 64 bytes from www.arrl.org (184.106.62.248): icmp_req=4 ttl=55 time=96.8 ms
I have 4 installations of Fedora 14 running on a Win 2008 R2 server in Hyper-V.
When I try to ping my desktop or the host server via the hostname from within any of the Fedora installations, the ping fails. I can ping by IP without issue. Also if I try to ping the VMs from my desktop it fails. I have an XP VM setup that I can ping without issue via hostname and IP.
All of the VMs can access the Internet without issue. I have disabled all firewalls on all systems with no luck. My desktop can ping the Hyper-V server without issue so it would appear that the problem lies with the Fedora installations.
My resolv.conf
Code:
Does anyone have anything I can try to get the name resolution working?
I'm using FC10 on my box at work. It is behind an anthenticated proxy for internet connection. In Gnome, I configured the Network Proxy through the GUI, as my browsers too.
So I can browse internet pages, install packages thru Add/Remove Software GUI, but I cant do it in the command line, using yum install, for example. Then trying to figure it out, I saw that it cant reach the package mirrors. It isnt a DNS problem, I set the /etc/resolv.conf correctly, as the host command works correclty. I can ping the local pcs on the network too. Firewall is disabled. Below some simple tests:
[rtovo@davinci ~]$ ping mirrors.fedoraproject.org connect: Network is unreachable [rtovo@davinci ~]$ host mirrors.fedoraproject.org mirrors.fedoraproject.org is an alias for wildcard.fedoraproject.org.
I installed Fedora 12 on my laptop. I have a wireless connection to the internet that works fine, I attached an Ethernet cable from this laptop to a windows machine. There is a green light.
I can ping my localhost. I can ping the windows machine using it internal IP address via the router. However, the eth0 IP address does not work when I ping to it from the windows nachine. Also, I cannot ping to the windows machine using the IP address associated with the Ethernet connection.
i have Fedora 13 dual booting with Win XP and i cannot ping my router in Fedora. just reinstalled and i'm still unable to ping my router.everything looks like it was installed correctly except in the ifcfg-eth0 it has IPV4_FAILURE_FATAL=yes dont think this should have a value of yes.
On the ROUTER I have set the ip_forward=1 and eth0.proxy_arp=1 and eth1.proxy_arp=1 then I run the following command : route add -net 192.168.2.0/24 gw 192.168.2.1 dev eth0 route add -net 192.168.4.0/24 gw 192.168.4.1 dev eth1
On PC1 I executed the following : route add -net 192.168.4.0/24 gw 192.168.2.1 dev eth0 and for PC2 I run the following route add -net 192.168.2.0/24 gw 192.168.4.1 dev eth0
After doing those things, I can't ping between PC1 and PC2... but both can ping the router...
Background: In attempting to move from XP to linux, I have a F14 live USB stick -- can boot Dell M6400, see the internal drive and USB sticks. Wired ethernet network is seen only if ethernet cable is plugged in before booting. Then, I can ping sites by name (yahoo.com, google.com) -- however, FireFox does not load any web-page over the internet -- it does not put up an error message either, it just keeps waiting (it is in on-line mode).Info on the system
uname -a Code: Linux localhost.localdomain 2.6.35.6-45.fc14.x86_64 #1 SMP Mon Oct 18 23:57:44 UTC 2010 x86_64 x86_64 x86_64 GNU/Linux [code]...
I try to use the "ping -a" command for getting an audible ping. But there is just silence The command "beep" works fine, so everything should be ok with the speaker (in the konsole).
Since I installed FC11 I can't get vpnc to work (I always getno response from target").Also I can't ping any external IP even with the firewall disabled.What I see strange is that I had the same configuration in FC10 and the router configuration seems okay to me:
Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.64.64.64 * 255.255.255.255 UH 0 0 0 ppp0
