I am using slackware 13.0 on my HP 520 machine. I got a problem with wireless connection.I use #iwconfig wlan0 essid Rendezvous key s:09876 mode Ad-Hoc. to connect to the Rendezvous network,but i am not able to ping other machines on the same network. Firewall have no prob. I am using iwl 3945 module.
View 9 RepliesI just installed open Suse 11.3, and I cannot SSH my school. Upon further investigation I could not even ping any machines outside my local area network. Ironically I could nmap machines outside my local area network.
View 4 Replies View RelatedSo in an effort to increase the speed of my netbook, I removed Ubuntu and installed Lubuntu on it. When I tried to mount my samba share as I normally do, I noticed it wasn't able to connect - mount error(113): No route to host. Sensing something fishy, I attempted to ping the machine (both by name and by IP) - Destination Host Unreachable.The machine I'm trying to connect to is using Ubuntu 10.04 x64. I attempted to ping the other way and it was able to connect to the netbook just fine. When the netbook was using Ubuntu, it was connecting fine. My iptables check out ok, but here is the output of iptables -nvL:
Code:
Chain INPUT (policy ACCEPT 213 packets, 21635 bytes)
pkts bytes target prot opt in out source destination
Chain FORWARD (policy ACCEPT 0 packets, 0 bytes)
[code]....
Does lubuntu have some funky firewall built in to it that I can't find? (I've Googled for information on a Lubuntu default firewall and can't find any)
I installed openSUSE on one of my work system. The network port wasn't working when I was installing, but works fine now (checked in Windows). But for some reason, I am not able to configure the network. I used both Dynamic and Static IPs (both work fine in Windows) but still no go. I am using Yast Control Center for this purpose. I can't even ping the default gateway when I am using custom settings. When I use dynamic settings, it says Unreachable Network.
View 7 Replies View RelatedThe NetworkManager applet on my desktop states that my router is 192.168.2.1 and that my first DNS server is 192.168.2.1, but I cannot ping any hosts on my network using by name. All my other computers are windows so the naming is netbios naming, but I don't know if that makes any difference to DNS. I take it that because the other computers are windows that I need a wins client or something on my Fedora laptop. I would rather not fill out my hosts file because the IP addresses of the windows boxes may change.
View 2 Replies View RelatedI have ubuntu 10.4 running on both my desktop and laptop. Both machines are connected to the router in wireless mode with Wifi.I can access internet from both machines without any issues, however I cant ping one machine from another. (and vice versa)
View 4 Replies View Relatedunreachable computer's ifconfig reports xxx.xxx.xxx.37 but when I ping that address from another computer it says "Destination Host Unreachable" (all the other computers on the LAN can ping each other except this one particular computer)I can ping other computers from the unreachable computer just fine...
View 9 Replies View RelatedI m not able to ping nor able to restart the services.....i dont know wht happened.its giving the error.........
Error,some other host already uses address.im having 3 ethernet cards...this is my main server of company.
i have installed linux debian in my computer but i have aproblem , i have a ping only on my computer itself , not to gateway or other computers on my network .
Ip : 10.0.88.9
Gateway : 10.0.88.1
dns :10.0.88.7
note:when i have installed system i have no internet connection so it is not installed updates
I have installed Micro Core onto a usb of mine and am running it on my laptop. I have been able to successfully obtain a connection and valid ip with my router. As you can see below my wireless connection seems valid computer-end and on my router's page it comes under the list of attached devices.Although this is all fine and dandy, I'm am unable to ping my router or any other computer on my network, I am also unable to ping my laptop from other computers on the network. Also by the looks of it I have having no trouble transmitting, but I am not receiving any packets.
[Code]...
I'm running into a curious networking hiccup with my router setup. I have a D-Link DIR-628 wireless router connected to our modem, and a wire running from that to a Linksys WRT-54G (v1.1) in our basement. This setup worked great for a few days, but then suddenly the Linksys stopped routing us to the internet. I can connect to the router page on the Linksys and using the diagnostic tools I can ping the web from there, but none of the computers connected to it can. Everything is fine when connected to the D-Link.
After fiddling around with just about every setting on the Linksys I finally gave up and tried resetting it to factory defaults--and it worked! Everyone could access the internet again. But then, every day or two it locks up again and I have to reset factory defaults again.
I have two machines on this network, one running Ubuntu and the other running Fedora.
When I'm using the Wireless network on the Ubuntu machine, I cannot ping the Fedora machine. Everything else works. I can browse the net fine.
If I switch over to the Wired Network then I can ping the other machine.
I don't understand why ping doesn't work only over the Wireless. I can ping the router so I'm guessing it's getting blocked by the router but I didn't block ICMP traffic.
I tried asking on IRC and they ran out of ideas too to find out where the problem is.
This applies to my 2 opensuse PC's, my Windows PC is fine.I can ping a hostname, say "PC1" but I can not ping PC1.domain.local (even the host PC can not ping it's own FQDN). When I ping just the hostname the ping stats even list the FQDN.Onto the next issue, since all my PC's, have the domain prefix domain.local, my Synology can not. I can ping it's IP and that is it. I can resolve it's name with nmblookup just fine tho and that is what is killing me. How is this not resolving.Even weirder, I can browse to "Synology" in Network Servers under places on the slab.
View 3 Replies View RelatedI am using an virtual machine. where I need to ping from one machine to another. earlier I was able to ping. But after going to google.com once, I cannot ping back to this machine.
But if I gave ping -I eth1 <IP> then I can ping.
I cannot install any package, so tell me solution which includes not installing any package.
I've been trying to understand how Linux creates the network/interfaces on a machine (been reading the Linux admin guide), but as I'm pretty new to this subject, I've got lost in the forest.
To provide with my goal:
1.) Learn about network setups on Linux
2.) Be able to maintain my own (virtual) network
3.) Configure my (virtual) network
Does anyone know how to permanently enable X connections from all machines on my local network. I keep having to enter 'xhost +' to allow X connections.
View 2 Replies View RelatedTwo completely different slack 13.2 systems just started to lockup, no matter what gui I use. They had been running fine for months. Mouse and keyboard stop working, the only thing I can do is hit the reset button to reboot. The only things in common are they are both slack 13.2 and they were installed about the same time, but the graphics cards and cpus are different. Where should I start to troubleshoot this problem?
View 14 Replies View RelatedI'm new to SuSe and lateley I was trying to establish a Network, when some weired problems occured. I was able to establish the network and i have connection to the internet. The suse-machine is rechable by ping from all the other computers in the network. If I'm tryiing to ping the other computers from the suse-machine, nothing happens. The router responds without packet loss, but every other ping occurs in:
From 192.168.2.6: icmp_seq=2 Destination Host Unreachable
From 192.168.2.6: icmp_seq=3 Destination Host Unreachable
From 192.168.2.6: icmp_seq=4 Destination Host Unreachable
From 192.168.2.6: icmp_seq=5 Destination Host Unreachable
I've been searching for some ideas to solve this problem but couldn't find any.
I'd like to use one of my machines for all kinds of audio applications, including home recording (MIDI and analog). Now I am looking for a suitable audio/recording interface. I've searched the web, but didn't find a lot of current information. Most of what I found is outdated.
RME Hammerfall seems to be brilliant, but exceeds my budget. MAudio 2496 seems to be excellent in quality, but a bit limited in connectivity. ESI Juli@ appears to be even better, but the parts exposed to the outside of the computer case don't seem to be overly robust..And that seem already to be all PCI devices supported by ALSA for my purpose! (MAudio Audiophile 192, e. g., is reported not to work that well).
Now I thought, I could avoid all this hassle by choosing a USB device. However, situation seems to be even worse. Terratec DMX 6Fire USB is not supported, at all, MAudio Fast Track Pro is limited to USB 1.1 and 48kHz (I want 96 kHz, at least!) only and requires a patch for 24 Bits. And so on...
I have dell dimension 4700 I installed slackware 12.2 onto with the of making it a headless home network jukebox that I could ssh into and control via a crossover cable.From other posts I've seen, it looks like I just need to set up the IP addresses under the same netmask, and can use ssh then. On the slackware machine, it does not seem to recognize an eth device.
Code:
# dmesg | grep eth
Driver 'st' needs updating - please use bus_type methods
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
[code]....
I'm wondering about the easiest way to network two computers over a Router. I go to Network on the Places Drawer and see the other machine, though it's empty and shows nada.
View 5 Replies View Relatedi've been trying to network my machines together, 3 to be exact, without using SAMBA, as there is no point using SAMBA as there are no windows machines on the network at all, have tried using the standard network admin GUI's and following some guides, without success, what is the step by step procedure for creating network shares linux-linux only networking, regards
View 5 Replies View RelatedI have VMware player on my laptop. I have three working virtual machines, Android, Windows Vista, and Kubuntu, and three that something went wrong don't work. How do I get rid of these space cloggers? Just go to Home folder/VMware and jus delete the folders of useless machines? Or is there a way to do it properly? Or am I stuck with these forever? And how do I rename a virtual machine?
View 1 Replies View RelatedI have several Windoz machines in a peer-to-peer network and now two SUSE machines, one 11.1 and another 11.2.I have a network printer accessible now to all the machines.My next step is to be able to share files between all the machines and several network drives. I know how to set this up between the Windoz machines, but the only way I can get the SUSE machines to see the network (and be seen) is to shut down their firewalls, and I don't think that's how you are supposed to do it?Can someone point me to what it is that I need to read, or is there a FAQ somewhere to help get me started?
I think that this has something to do with Samba and I installed Samba (client or server? I forget) on the 11.1 and 11.2 seems to have it already built-in, but I don't know how to set it up with the firewalls on the two Linux machines so that it is all seamless (as if anything can be seamless).
I only have one IP adress to access the server. But the server will host 3 web sites and I want them to be hosted in a vm. So, I want to setup 3 virtual machines to do it and use apache reverse proxy and vhosts to redirect the domain requested to the right vm. Now. I understand the concept, but I am not an expert to set that up....
I have an openSUSE 11.3 server. So, I have to set a virtual machine server, is that right? I have been told that I cannot do it with VMware server in oS 11.3. Can I use virtualbox for this? I only have to install virtual box? Is there a special version to install? Once the virtual machine server is install, is it trivial to create 3 vm? So, I want to know wich are the steps I have to take to set that up.
I have a problem sharing files between two machines on my network, one, my main one running 10.10 and the other running Lubuntu. I've used the share files option on my main computer, and they show up on the Lubuntu machine, but when I try accessing the files, I get a message telling me that they'failed to mount'. It's frustrating in that I can see that the files are there, and obviously the Lubuntu machine can 'see' them too. I'm sure that I must have missed out something, and I've tried searching, but so far have only come accross some very old tutorials that just confuse me more. Surely there must be a fool proof way of getting this all working? (I've tried Giver, but the Lubuntu machine refuses to run Giver!)
View 3 Replies View RelatedI've got a few parts laying around and maybe a 100 bucks on NewEgg I can get a Windows Server going. However, I have a few questions. I already have two Ubuntu servers going. My main concern is OS updates. I have Ubuntu based distros covered via apt-cacher-ng on one of my Ubuntu servers. I also have a nice squid server going with adzapper and so on. However, I have a bunch of Windows based machines on my network, and I have very limited bandwidth. I know I can run a virtual server on my main server, but I prefer to have an actual box just for a WSUS server for personal reasons. This is only an option if there is no option for WSUS style updating through Linux on my current server.
If I have to build a low powered Windows Server box in order to just push Windows updates for XP, Vista, and 7 to save bandwidth in the long run will a copy of Windows Home Server do the trick? I read an article from MaximumPC that WHS 2.0 will have a WSUS feature, but is this feature available in WHS 1.0? This is a really crappy way of storing updates and save bandwidth, but I don't know what other options I have. I live and work in a very remote area and I've already done everything I can think of to help save bandwidth. Like having a transparent proxy server and apt-cacher-ng running. It's also helps run things a lot faster when updating Ubuntu based boxes and surfing the internet. If I could just get the Windows updates out of the way I would be golden. I'll wait for WHS 2.0 if I have to. I'm not buying a full blown copy of Windows Server just for updates, especially on a box that'll cost about 300 bucks when complete. Still better than a prebuilt WHS box advertised on NewEgg for 600 bucks.
Me and my friend have been talking about networking our two machines over the internet. So he has done his side. Now i need to do my side... Any ideas on how i would go about configuring my computer to do this?
View 9 Replies View RelatedI usually monitor machines in the network via ruptime. But one machine (lambda) acts very odd. It never shows up in the output of ruptime, unless ruptime is run from a particular client (delta). For example, say I am logged in lambda. This is what the output of ruptime and few other commands are:
[Code]...
Linux delta.grp.vpncc.org 2.6.18-53.1.21.el5 #1 SMP Tue May 20 09:35:07 EDT 2008 x86_64 x86_64 x86_64 GNU/Linux Only difference between delta and other machines is the fact that delta is the file server that hosts the nfs directories shared in all the machines. All the machines are in the same subnet. All of them run either RHEL4, RHEL5 or CentOS5. lambda runs RHEL 5.4, delta runs CentOS 5.2. I tried restrting rwhod daemon on lambda, but no change. why lambda is playing this hide and seek with ruptime?
I've setup two slackware in a Dell Inspiron 640m e in Acer Aspire One D150.
In my router the domain is "home", the two slack use wicd (dhcpcd backend) to connect. I can go in internet.
The problem is that in my router panel I can see the hostname (so dhcpcd send the right one) but they can't ping other machine in the lan (windows 2000, nas or other linux box).
Now I can't use a fixed ip (i change several networks with different routers).
I think I miss something that can ask to my router the hostname.
Anyway I was able to ping Dell.local and Acer.local with Ubuntu karmic.