I have ubuntu 10.4 running on both my desktop and laptop. Both machines are connected to the router in wireless mode with Wifi.I can access internet from both machines without any issues, however I cant ping one machine from another. (and vice versa)
View 4 Repliesi have installed linux debian in my computer but i have aproblem , i have a ping only on my computer itself , not to gateway or other computers on my network .
Ip : 10.0.88.9
Gateway : 10.0.88.1
dns :10.0.88.7
note:when i have installed system i have no internet connection so it is not installed updates
I have installed Micro Core onto a usb of mine and am running it on my laptop. I have been able to successfully obtain a connection and valid ip with my router. As you can see below my wireless connection seems valid computer-end and on my router's page it comes under the list of attached devices.Although this is all fine and dandy, I'm am unable to ping my router or any other computer on my network, I am also unable to ping my laptop from other computers on the network. Also by the looks of it I have having no trouble transmitting, but I am not receiving any packets.
[Code]...
I have two machines on this network, one running Ubuntu and the other running Fedora.
When I'm using the Wireless network on the Ubuntu machine, I cannot ping the Fedora machine. Everything else works. I can browse the net fine.
If I switch over to the Wired Network then I can ping the other machine.
I don't understand why ping doesn't work only over the Wireless. I can ping the router so I'm guessing it's getting blocked by the router but I didn't block ICMP traffic.
I tried asking on IRC and they ran out of ideas too to find out where the problem is.
I installed openSUSE on one of my work system. The network port wasn't working when I was installing, but works fine now (checked in Windows). But for some reason, I am not able to configure the network. I used both Dynamic and Static IPs (both work fine in Windows) but still no go. I am using Yast Control Center for this purpose. I can't even ping the default gateway when I am using custom settings. When I use dynamic settings, it says Unreachable Network.
View 7 Replies View RelatedI am using an virtual machine. where I need to ping from one machine to another. earlier I was able to ping. But after going to google.com once, I cannot ping back to this machine.
But if I gave ping -I eth1 <IP> then I can ping.
I cannot install any package, so tell me solution which includes not installing any package.
The NetworkManager applet on my desktop states that my router is 192.168.2.1 and that my first DNS server is 192.168.2.1, but I cannot ping any hosts on my network using by name. All my other computers are windows so the naming is netbios naming, but I don't know if that makes any difference to DNS. I take it that because the other computers are windows that I need a wins client or something on my Fedora laptop. I would rather not fill out my hosts file because the IP addresses of the windows boxes may change.
View 2 Replies View RelatedI am using slackware 13.0 on my HP 520 machine. I got a problem with wireless connection.I use #iwconfig wlan0 essid Rendezvous key s:09876 mode Ad-Hoc. to connect to the Rendezvous network,but i am not able to ping other machines on the same network. Firewall have no prob. I am using iwl 3945 module.
View 9 Replies View Relatedunreachable computer's ifconfig reports xxx.xxx.xxx.37 but when I ping that address from another computer it says "Destination Host Unreachable" (all the other computers on the LAN can ping each other except this one particular computer)I can ping other computers from the unreachable computer just fine...
View 9 Replies View RelatedI m not able to ping nor able to restart the services.....i dont know wht happened.its giving the error.........
Error,some other host already uses address.im having 3 ethernet cards...this is my main server of company.
I have installed redhat 9 on my pc i want to configure samba i connect these two pc with cross cable i given both c class ip add when i going to ping from linux pc getting ping but xp getting ping
View 3 Replies View RelatedI have am having some network troubles. I can't access my samba share. Trying to resolve this I realized I couldn't ping from ubuntu to windows. (default ubuntu.jaunty.server.x64)
Windows IP..192.168.002.021
Ubuntu IP...192.168.002.020
Laptop IP...192.168.002.031
Router IP...192.168.002.001
[Code]....
I can ping the router, but I cannot ping anything outside of the network. The ping just sits there and eventually times out, no error message. I cannot download updates and it is the only box inside the network having any issues accessing the internet. I am running 10.10 server. I can get a list of packages on the update server, but not download them, it appears to be in an incoming issue. I'm using a motorola Netopia router in bridge mode with a netgear SRXN3205 as a router. Again every other system can download fine. I have tried running on one nic, no help dhcp, static again does nothing. I can pulls host [URL].. and I get
[code]...
It may be worth noting that I set the box up at home on a dlink router and it worked fine, however I am confused why it is the only system on the network having these issues every other box can ping just fine.
i have problem ubuntu server network! internet works but #cant ping [URL]... and outside ip?
View 9 Replies View RelatedMy Internet Router is on 64.1.1.1
I have 2 NICs in my Linux Box: (Firewall OFF)
Eth0 -> 64.1.1.2 and cross-cable connected to Internet Router (64.1.1.1)
Eth1 -> 192.168.1.1 Connected to switch hub
Default gateway of Eth0 is to Internet Router (64.1.1.1)
From Linux-Box.. I able to ping to internet(ie. ping 202.158.3.7)
Client PC: (Firewall OFF)
Default Gateway is 192.168.1.1
I am unable to ping to internet (ie. ping 202.158.3.7)
I have a windows 7 desktop hardwired to my wireless router and a windows xp laptop connecting wirelessly on the same network. I am able to ping the windows 7 box by its ip address but unable to do so by its hostname. This is very inconvenient since I would like to set up a share by hostname (doesnt change) and not by ip (changes occasionally since its dhcp).
View 8 Replies View RelatedI have a somewhat complicated network setup that I am testing on an internal network. I have the following route setup:
PC Client (192.168.2.100) --> Router (192.168.2.1) --> DSLAM (on our internal network) --> PPPOE Server (192.168.9.1) on Linux Ubuntu 8.04 on interface card eth2.
On the same Linux Ubuntu Machine on interface card eth1 (static IP 192.168.5.100), I have an Asterisk SIP server plugged into it. SIP Server = 192.168.5.101 (static) I need the PC client (192.168.2.100) to register via SIP soft phone to register on the SIP server (192.168.5.101). From the PC client I can ping as far as the eth1 interface (192.168.5.100)...but cannot ping the SIP Server (.101).
From the SIP server (192.156.5.101)...I can ping 192.168.5.100, I can ping 169.254.5.228 (Eth2:avahi), but not sure what that is. I cannot ping the pppoe default gateway (192.168.9.1), which I think you cannot anyway. No firewalls are running. My IPtables I cleaned out totally. I think it might be as simple as a route add, but I really have no clue. Tried building a virtual bridge using brctl LINUX betweeh eth1 and eth2, but that made things worse (could not ping anything after that)
Route table:
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.9.100 * 255.255.255.255 UH 0 0 0 ppp0
192.168.5.0 * 255.255.255.0 U 0 0 0 eth1
[code]...
This applies to my 2 opensuse PC's, my Windows PC is fine.I can ping a hostname, say "PC1" but I can not ping PC1.domain.local (even the host PC can not ping it's own FQDN). When I ping just the hostname the ping stats even list the FQDN.Onto the next issue, since all my PC's, have the domain prefix domain.local, my Synology can not. I can ping it's IP and that is it. I can resolve it's name with nmblookup just fine tho and that is what is killing me. How is this not resolving.Even weirder, I can browse to "Synology" in Network Servers under places on the slab.
View 3 Replies View Relatedi have Fedora 13 dual booting with Win XP and i cannot ping my router in Fedora. just reinstalled and i'm still unable to ping my router.everything looks like it was installed correctly except in the ifcfg-eth0 it has IPV4_FAILURE_FATAL=yes dont think this should have a value of yes.
View 13 Replies View RelatedIn my office i have a network of 172.16.31.0 and a squid proxy server running, all other systems have windows XP and one system has centos. On centos system i have three lan cards and i want to test some things on it. So i assigned another IP on it of range 192.168.7.0/24 and same range on another windows system. And all the systems connected through a same network switch.
Unable to ping between Centos and Windows system. If i ping from one centos to windows system with the series of 172.16.31.0 then it replies very well but same thing is not happening in other 192.168.7.0/24 IP series.
My Eth0 has 3 virtual Ethernet (eth0:1, eth0:2, eth0:3)
Eth0 -> 202.1.1.1
Eth0:1 -> 202.1.1.2
Eth0:2 -> 202.1.1.3
Eth0:3 -> 202.1.1.4
I am unable to ping them (202.1.1.2 - 202.1.1.4) from Client's PC.
when I was still at my university room where the connection would work after a few reboots. After moving back home the connection worked on and off for a day before not working at all. NetworkManager is telling me that I am connected and have an ip address, etc, but nothing is able to get an internet connection. I am able to ping myself but am not able to ping my router. Everything works fine on M$ and other PC's on the network, it's just my ubuntu 10.04 that is playing up.
View 9 Replies View Relatedcannot ping internal network
I am a new user to Linux but in the last couple of months gained some Idea about it,I am trying to set up a small network in my office having 3 windows xp PCs, two fedora10 PCsI have an adsl router with 4-port hub connecting to the internet, one switch (say sw1) and one linux PC (say linux1) is connected directly to the router, the three win xp PCs are connected to switch sw1.all the above is working fine, I am able to get connected to Internet In all the systems, and able to network among all the above four.Now I want to make the linux1 as a proxy server for, hence I added another network card into it connected it to another switch sw2, which is connected to another linux pc (say linux2).
I have tried a hundred things, and googled an equal no. and finally posting it here.In order to reduce confusion I have disabled DHCP in all machines, and given static ips insteadNetworkManager was not happy about it, hence to fix my static IP i disabled NetworkManager ('chkconfig NetworkManager off')
Is there a way to disable ping in the network instead ping of IP addresses must be hostname or a name.
View 1 Replies View RelatedSo in an effort to increase the speed of my netbook, I removed Ubuntu and installed Lubuntu on it. When I tried to mount my samba share as I normally do, I noticed it wasn't able to connect - mount error(113): No route to host. Sensing something fishy, I attempted to ping the machine (both by name and by IP) - Destination Host Unreachable.The machine I'm trying to connect to is using Ubuntu 10.04 x64. I attempted to ping the other way and it was able to connect to the netbook just fine. When the netbook was using Ubuntu, it was connecting fine. My iptables check out ok, but here is the output of iptables -nvL:
Code:
Chain INPUT (policy ACCEPT 213 packets, 21635 bytes)
pkts bytes target prot opt in out source destination
Chain FORWARD (policy ACCEPT 0 packets, 0 bytes)
[code]....
Does lubuntu have some funky firewall built in to it that I can't find? (I've Googled for information on a Lubuntu default firewall and can't find any)
I'm having trouble pinging localhost, specifically, pinging localhost when I'm not connected to a network. When I try it keeps telling me the operation is not permitted:
Code:
matt@mubuntu:~$ ping localhost
PING localhost (127.0.0.1) 56(84) bytes of data.
ping: sendmsg: Operation not permitted
ping: sendmsg: Operation not permitted
if I connect to the network, start pinging then disconnect it continues pinging. Google seems to think it could be something to do with my iptables setup:
Code:
matt@mubuntu:~$ sudo iptables -L
Chain INPUT (policy ACCEPT)
target prot opt source destination
[code]....
When not connected to network
Code:
matt@mubuntu:~$ route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo
But as far as I can tell there isn't anything in there which would stop me connecting to the localhost (I also can't connect to my local apache instance when offline)... (It's worth mentioning that a couple of weeks ago I had the pc setup to share it's internet connection with a laptop, ala this guide, however I've since disabled the iptables rules and disabled ip forwarding.)
I have a router which have 4 ethernet ports(eth0,eth1,eth2,eth3,eth4 ) & One ADSL Line & One USB, I need to configure My router eth3 as a WAN & eth0 as a LAN using iperf, I am going to findout test a my Application(using iptables) whether my application is correct or wrong As of now I configured like server pc1(192.168.1.230)--->eth0(gw)(192.168.1.1)Router--eth3(gw)(192.168.2.1) -->pc2(192.168.2.157). For eth3 as a WAN and eth0 as a LAN. But I am not able to ping between two pc's.
View 1 Replies View RelatedI did a new install of Fedora 14. This is my first time using Linux seriously and I am trying to figure it all out.
I am able to ping my hostname of sinbad only from the linux system itself. On all my windows boxes, I am not able to ping it. I can only ping the IP address.
Here is /etc/hosts:
Quote:
I disabled the firewall, disabled SELinux, and still not able to ping it.
Here is the info from ifcfg-eth0 :
Quote:
Quote:
I have two linux servers, I tried to ping from one linux box to another and vice versa but error message is "connect: Network is unreachable" Where as If I tried from windows machine I am getting the reply from both the servers.
C:Documents and Settings>ping bnkprod
Pinging bnkprod.softtech.com [172.20.40.141] with 32 bytes of data:
Reply from 172.20.40.141: bytes=32 time=16ms TTL=64
Reply from 172.20.40.141: bytes=32 time<1ms TTL=64
Reply from 172.20.40.141: bytes=32 time<1ms TTL=64
Reply from 172.20.40.141: bytes=32 time<1ms TTL=64
Ping statistics for 172.20.40.141:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 16ms, Average = 4ms
I want to ssh to a pc in our home network. It is a standard network in terms of a DSL router, dynamic IPs via DHCP, WPA2/PSK security, wireless network connection for all pcs except one which is wired to the router.I got the error "no route to host" from ssh. Openssh-server was already installed. It turned out later that the laptop I want to ssh to (namely the one which is connected by cable) cannot be pinged by any other laptop on the network.
The pc in question (lucid lynx with most recent updates) is online, can ping itself and the router, but cannot ping others in the network and cannot be pinged by them. I suspect a firewall setting of being the problem.