Fedora Networking :: F13 Unable To Ping External Host From Behind Proxy
Aug 17, 2010
I can ping a host on my LAN successfully, but I cannot ping [URL]... for example. I have disabled the firewall and set http_proxy and can browse the internet with "Use system proxy settings" checked in Firefox. I am unable to update with yum either, but I am not sure if this is a side effect or not. I have run a trace on my ip address as I am browsing the internet and I can see the sites I am visiting on our web appliance. However, if I try to ping or update no requests are hitting the proxy so I don't think that is the issue.
View 6 Replies
ADVERTISEMENT
Jan 19, 2010
Host - Fedora 12 64bit
KVM
VM - Windows Server 2008 64 bit
bridge-utils
VM can ping host and Internet but host can't ping VM.
I set VM static IP 192.168.0.205.
It turns out dynamic IP - 192.168.0.55
On host:
View 2 Replies
View Related
Jun 15, 2010
I had configured Squid in RHEL 5 and facing an issue with pinging. Not able to ping any website,hostname is resolving to ip address but not able to ping
[code]...
View 8 Replies
View Related
May 27, 2010
This is a RHEL 5.4 install. I did a fairly routine install setting up a static IP address of 10.5.96.10, a subnet mask of 255.255.254.0, and a gateway of 10.5.96.1 with the standard DNS setup for this network. These are all standard network setting for this network and otherwise work fine on other systems. The IP, gateway, and subnetmask all appear correctly on all relevant configuration files. This server can not ping any other system on the network and can not ping its default gateway. No other systems can ping this one either. Also this system can not ping "localhost" or its own hostname. The hosts file contains the line:
[code]...
I can ping 127.0.0.1 and 10.5.96.10 and it works fine. Also the firewall is disabled. I know I probably can't get a straight forward fix with the information I have on hand right now, I'm more of a Debian guy, so there might be some Red Hat intricacies I'm not familiar with. I think I had a CentOS install some months back that had this issue and I don't remember how I fixed it, or if I even did. I might have just replaced it with Debian. That's unfortunately not an option this time around since it's not my box.
View 4 Replies
View Related
Jul 24, 2010
what I am trying to do is use an external transparent proxy for only one of the hosts on my internal network. For example, for an internal host of 192.168.1.8, I want to send all internet requests for ANY port to a proxy server out in the internet at 238.34.232.7 / port: 8080. All other hosts would use the internet without using any proxy server. Is IPTables the way to set this up or is there an easier option?
View 3 Replies
View Related
Jul 24, 2010
I have searched for this quite a bit but my lack of knowledge of IPTables makes me doubt whether I have found a solution or not. I have very light experience with IPTables as well.So I thought I'd ask here.Basically, what I am trying to do is use an external transparent proxy for only one of the hosts on my internal network. For example, for an internal host of 192.168.1.8, I want to send all internet requests for ANY port to a proxy server out in the internet at 238.34.232.7 / port: 8080. All other hosts would use the internet without using any proxy server.
View 1 Replies
View Related
Mar 28, 2010
After I applied below iptables rule.. I am unable to ping the host in 172.16.1.0/24 from OpenVPN client
View 1 Replies
View Related
Jul 9, 2010
Ive got a problem on my server ....installed Debian 5 , Webmin and than syscp settung up syscp ready ....
I try to ping "localhost" ansver ping: unknown host
I try to ping "localhost." there is a host with IP 127.0.0.1
I need it to change it in "localhost"
Is that the bind9 maybe?
View 1 Replies
View Related
Jun 17, 2009
Since I installed FC11 I can't get vpnc to work (I always getno response from target").Also I can't ping any external IP even with the firewall disabled.What I see strange is that I had the same configuration in FC10 and the router configuration seems okay to me:
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
10.64.64.64 * 255.255.255.255 UH 0 0 0 ppp0
[code]...
View 3 Replies
View Related
Jul 24, 2010
I have two machines on this network, one running Ubuntu and the other running Fedora.
When I'm using the Wireless network on the Ubuntu machine, I cannot ping the Fedora machine. Everything else works. I can browse the net fine.
If I switch over to the Wired Network then I can ping the other machine.
I don't understand why ping doesn't work only over the Wireless. I can ping the router so I'm guessing it's getting blocked by the router but I didn't block ICMP traffic.
I tried asking on IRC and they ran out of ideas too to find out where the problem is.
View 7 Replies
View Related
Jan 13, 2011
I am able to traceroute but unable to ping a external mail server ? What could be the reason ?
View 3 Replies
View Related
Jan 19, 2010
Host - Fedora 12 64bit
KVM
VM - Windows Server 2008 64 bit
bridge-utils
VM can ping host and Internet but host can't ping VM.
I set VM static IP 192.168.0.205.
It turns out dynamic IP - 192.168.0.55
On host:
$ ping -c3 192.168.0.55
fails
View 2 Replies
View Related
Jun 9, 2010
i have Fedora 13 dual booting with Win XP and i cannot ping my router in Fedora. just reinstalled and i'm still unable to ping my router.everything looks like it was installed correctly except in the ifcfg-eth0 it has IPV4_FAILURE_FATAL=yes dont think this should have a value of yes.
View 13 Replies
View Related
Sep 26, 2010
I made an ip packet using raw sockets and used icmp header of echo request inside that ip packet.I have a wifi lan with 2 host(laptops) connected to it. when I send the packets to any of these host the reply me with echo reply as i see in wireshark. but when i change the source ip and mac to that of another host there is no echo reply packet in the network but only echo request packet is there. Can anybody tell me why is this happening. and am also using Promiscuous mode so non of the packet is discarding.
View 3 Replies
View Related
May 9, 2011
I have a server that I can ping, and I can connect remotely with ssh to it. But when I try to connect to apache (port 80) I get "no route to host". But I can connect to localhost It's not just my client system that is having this problem but also systems that are on the same subnet There is no firewall running on the server route on the server
[Code]...
View 9 Replies
View Related
Aug 26, 2009
I have 2 live IP based Linux systems .
[Code]...
Both systems connected in same LAN based network . Both WAN live ips are connected through different modems. Problem is that , no system is able to ping or connect with other system with Live ip , though they are able to connect through LAN ip and both systes are accessable and also able to browse internet (google etc..) Ping error :-- Destination Host Unreachable.
View 2 Replies
View Related
Dec 15, 2010
I have a router which have 4 ethernet ports(eth0,eth1,eth2,eth3,eth4 ) & One ADSL Line & One USB, I need to configure My router eth3 as a WAN & eth0 as a LAN using iperf, I am going to findout test a my Application(using iptables) whether my application is correct or wrong As of now I configured like server pc1(192.168.1.230)--->eth0(gw)(192.168.1.1)Router--eth3(gw)(192.168.2.1) -->pc2(192.168.2.157). For eth3 as a WAN and eth0 as a LAN. But I am not able to ping between two pc's.
View 1 Replies
View Related
Nov 24, 2010
I did a new install of Fedora 14. This is my first time using Linux seriously and I am trying to figure it all out.
I am able to ping my hostname of sinbad only from the linux system itself. On all my windows boxes, I am not able to ping it. I can only ping the IP address.
Here is /etc/hosts:
Quote:
I disabled the firewall, disabled SELinux, and still not able to ping it.
Here is the info from ifcfg-eth0 :
Quote:
Quote:
View 5 Replies
View Related
May 13, 2011
Even ping google's ip address doesn't work. unknown host error using backtrack4 able to browse net with these settings.
My network settings:
What's the problem with these settings...
View 10 Replies
View Related
Apr 5, 2010
I am using ubuntu 9.10 and I still cannot figure out this thing. I work behind a proxy managed by my university. Now, I cannot ping the other users on my network although they can ping me. Not to mention, I also cannot ping [URL]... It says : ping: unknown host [URL]... But I can ping the proxy server.
View 4 Replies
View Related
Aug 11, 2010
I have a somewhat complicated network setup that I am testing on an internal network. I have the following route setup:
PC Client (192.168.2.100) --> Router (192.168.2.1) --> DSLAM (on our internal network) --> PPPOE Server (192.168.9.1) on Linux Ubuntu 8.04 on interface card eth2.
On the same Linux Ubuntu Machine on interface card eth1 (static IP 192.168.5.100), I have an Asterisk SIP server plugged into it. SIP Server = 192.168.5.101 (static) I need the PC client (192.168.2.100) to register via SIP soft phone to register on the SIP server (192.168.5.101). From the PC client I can ping as far as the eth1 interface (192.168.5.100)...but cannot ping the SIP Server (.101).
From the SIP server (192.156.5.101)...I can ping 192.168.5.100, I can ping 169.254.5.228 (Eth2:avahi), but not sure what that is. I cannot ping the pppoe default gateway (192.168.9.1), which I think you cannot anyway. No firewalls are running. My IPtables I cleaned out totally. I think it might be as simple as a route add, but I really have no clue. Tried building a virtual bridge using brctl LINUX betweeh eth1 and eth2, but that made things worse (could not ping anything after that)
Route table:
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.9.100 * 255.255.255.255 UH 0 0 0 ppp0
192.168.5.0 * 255.255.255.0 U 0 0 0 eth1
[code]...
View 1 Replies
View Related
Dec 28, 2010
If I try ping a host on my internal lan from my ubuntu notebook the host name never resolves, but if I ping www.domainname.xxx it will resolve because our dhcp server is setup as the dns server too. If I use the connect to server tool and select samba share and specify host by name, it can resolve that and the shares show up... same dns server, same machine, but different interface/program. My real reason behind this is because my synergy+ keeps falling over whenever the synergy servers dhcp lease expires and it gets a new I have to then specify the new address and change configs.
View 3 Replies
View Related
Feb 28, 2010
I am working behind a http proxy (172.30.x.x:3128). I have configured it in my terminal. All the applications such as wget,lynx firefox etc. are working correctly.However all dns utilities like nslookup, host and even ping too are not working.Following is output of host command:
Code:
root@ding:~# host google.com
;; connection timed out; no servers could be reached
Output of host -T:
[Code]....
To connect to net I have to first run dhclient3(learnt from this forum!).It gives me my ip but where is dns address sent I don't have and idea.
View 14 Replies
View Related
Dec 4, 2010
I've encountered a problem after doing a fresh install with xubuntu 10.10 (2.6.35-23-generic).some sites are blocked like [url]....if I do dig [url]....- I receive the A, CNAME records and the IP address and everything.when ping[url].... - I receive 'unknown host'.when ping <theipaddress> - I receive responses
View 2 Replies
View Related
Jan 25, 2010
I have a machine running linux with 3 ethernet interfaces attached.
My Ifconfig:
My route output:
eth0 is attached to a laptop, eth1 is attached to a PC. eth2 is attached to a DSL modem, and the server is successfully acting as my internet gateway. The trouble is, my PC cannot see my laptop and vice versa. E.G. cannot ping, host seems down.
View 5 Replies
View Related
Aug 9, 2011
Am using Fedora 15, in which i was able to configure the proxy server and authentication. i confirmed this by configuring web broswer and it works. Now the problem is that i want to deploy it out to other computer system(client) i dont want to use the transparent proxy because the Proxy Authentication will not work.
I even tried to configure a DHCP server if it will work but i cant still configure for other computer system to work.
View 1 Replies
View Related
Apr 10, 2009
I have a box (boell) running Fedora 10 sitting behind a firewall at school. I am able to freely ssh to and from this box to other computers (minion) within that lan. Outside of this network I cannot directly ssh to boell - I must ssh first to minion, then I can ssh to boell. I've spoken with the sysadmin and he's verified that the firewall permits ssh freely - i haven't had any issues like this with other boxes of mine there, so this isn't any surprise.
I have verified that the hosts.deny file is blank, iptables permits ports 22 (and 80) and I didn't see anything obvious in the sshd_config. I tried a tcp dump on the external host and boell while attempting to ssh from the former to boell. The packets appear to be acknowledged by boell, but this fails to lead to a connection. I've tried this process with external hosts in different locations with the same result. I have made few modifications to the default installation for F10, so perhaps there is some default somewhere I have to change. In any case, below I have attached excerpts of germane files.
======== ssh from boell =======
[root@boell log]# ssh -vvv 71.189.5.67
OpenSSH_5.1p1, OpenSSL 0.9.8g 19 Oct 2007
debug1: Reading configuration data /etc/ssh/ssh_config
[code]....
View 3 Replies
View Related
Dec 9, 2009
I have VirtualBox v3.1.0 r55467 running on f12 2.6.31.6-162.fc12.i686. The guest is Windows XP SP3. I need to enable bridged mode for the virtual network interface on the guest. Everytime I enable bridge mode the following error occurs.
Quote:
Failed to start the virtual machine Windows XP. Failed to open/create the internal network 'HostInterfaceNetworking-wlan0' (VERR_SUPDRV_COMPONENT_NOT_FOUND). One of the kernel modules was not successfully loaded. Make sure that no kernel modules from an older version of VirtualBox exist. Then try to recompile and reload the kernel modules by executing '/etc/init.d/vboxdrv setup' as root (VERR_SUPDRV_COMPONENT_NOT_FOUND). When I run '/etc/init.d/vboxdrv setup' i get the following compilation error:
Quote:
Stopping VirtualBox kernel module [ OK ]
Removing old VirtualBox netadp kernel module [ OK ]
Removing old VirtualBox netflt kernel module [ OK ]
[code]....
dmesg gives me nothing. I have scoured the web .. and even asked on #vbox and #fedora cant get.
View 8 Replies
View Related
Sep 18, 2010
I am trying to turn an old desktop that has slackware 12.2 installed on it into a dhcp server that performs nat on a certain range of the subnet... the server's hostname is nutshell. Once I have it set up, I am testing it with a slackware64-13.1 laptop whose hostname is firebolt. Nutshell has a static ip. Before messing with the DHCP side of things, I thought I would start with getting NAT working. The steps I have taken are as follows:
I modified the /etc/rc.d/rc.inet1.conf script so that the interfaces would be setup on boot. Eth0 has ISP's static ip assigned to it, and I assigned 172.0.0.1 to eth1. I opened the box as wide as possible, so that former firewalls and security settings would not interfere. The contents of /etc/hosts.allow is All:All, and /etc/hosts.deny is an empty file. The firewall is set to allow everything, i.e., iptables -L has "ACCEPT" as default policy on all chains. Next I used iptables to start nat with the command:
[code]...
I can ping external ips from firebolt, so the NAT appears to be working properly. I fire up x-windows and surf a little. While I am surfing it freezes. Checking the pings again, suddenly firebolt cannot ping isp's dns anymore. Checking on nutshell, it can no longer ping external ips either. However, after running /etc/rc.d/rc.inet1 restart on nutshell, all is well, and it is pinging out again. I go back to firebolt and resume my surfing.
View 4 Replies
View Related
Mar 17, 2011
A brief description of my network:It is a small home network consisting of an Ubuntu 10.04LTS server edition, an Iomega ix2 NAS, a WinXP pro server and several family laptops.This is all routed through a Netgear WNDR3300 home router. All are assigned IP's via DHCP and all but the laptops are static (via DHCP though). The WAN address/DNS is assigned via DHCP from my ISP.The problem:When one of the machines is offline, Ubuntu does not resolve the netbios name correctly. No surprise here. But what is happening is that it is finding some arbitrary machine on another network. Below is what a ping to an offline host reveals:
Code:
ping -c3 hostname
PING hostname (204.232.162.92) 56(84) bytes of data.
[code]....
View 9 Replies
View Related
