Ubuntu Networking :: Unable To Ping Over Wireless But Can Ping Over Wired?
Jul 24, 2010
I have two machines on this network, one running Ubuntu and the other running Fedora.
When I'm using the Wireless network on the Ubuntu machine, I cannot ping the Fedora machine. Everything else works. I can browse the net fine.
If I switch over to the Wired Network then I can ping the other machine.
I don't understand why ping doesn't work only over the Wireless. I can ping the router so I'm guessing it's getting blocked by the router but I didn't block ICMP traffic.
I tried asking on IRC and they ran out of ideas too to find out where the problem is.
View 7 Replies
ADVERTISEMENT
Jul 15, 2011
I am using an virtual machine. where I need to ping from one machine to another. earlier I was able to ping. But after going to google.com once, I cannot ping back to this machine.
But if I gave ping -I eth1 <IP> then I can ping.
I cannot install any package, so tell me solution which includes not installing any package.
View 2 Replies
View Related
May 5, 2010
we are trying to install this NIC Rosewill RC-400 Chipset RTL8169S-32 in Ubuntu 9.04 we downloaded the drivers from Rosewill website (For kernel 2.4.x and 2.6.x V 3.1) but when we follow the instruction in the readme file and do make clean modules and error comes out
Code:
make -C src/ clean
make[1]: Entering directory `/home/trinity/Desktop/r8169-6.006.00/src'
rm -rf *.o *.ko *~ core* .dep* .*.d .*.cmd *.mod.c *.a *.s .*.flags .tmp_versions Module.symvers Modules.symvers rset[code]...
So I went do realteak downloaded latest available drivers that seems to be were release yesterday did same command and same error So I made only make and it went fine did then make clean modules and went fine so made make install, depmod -a and modprobe r8169 verify int was up and getting correct ip from router but I'm not able to access the internet or ping any IP address
Code:
xxx@xxx-desktop:~$ uname -a
Linux xxx-desktop 2.6.28-18-generic #60-Ubuntu SMP Fri Mar 12 04:40:52 UTC 2010 i686 GNU/Linux
xxx@xxx-desktop:~$
View 9 Replies
View Related
Jul 9, 2010
Ive got a problem on my server ....installed Debian 5 , Webmin and than syscp settung up syscp ready ....
I try to ping "localhost" ansver ping: unknown host
I try to ping "localhost." there is a host with IP 127.0.0.1
I need it to change it in "localhost"
Is that the bind9 maybe?
View 1 Replies
View Related
Feb 1, 2011
I just installed my first EVER bind DNS server. I am running bind9 on Ubuntu 10.04. Everything seems to be working great except one thing: If I ping a host that I have set up in bind by its HOSTNAME the pings take 5-6 seconds to reply/print to the screen between each echo response. If I ping by the host's IP address, they echo back very quickly.
I have read that IPv6 can cause this, but I have disabled it in /etc/sysctl.conf and the problem still exists.
I know everyone says this can't be a DNS issue, but this never was an issue with dnsmasq (which i was using prior), and it doesn't make sense that the ping are ONLY slow when pinging by hostname and not IP.
Configs below:
Ping by hostname - there is a 5-6 second delay between each one of the responses:
Code:
Ping by IP - the responses come VERY quickly one after the other:
Code:
/etc/resolv.conf:
Code:
Code:
rev.0.168.192.in-addr.arpa:
Code:
View 10 Replies
View Related
Apr 29, 2010
So, I have an Virtual Machine running CentOS 5.4. It sits behind a hardware firewall which also does NAT'ing. I've set up plenty of these, so I know for sure the firewall and NAT rules are set up correctly. From the host, I can ping anything in my subnet and the gateway. But I can't ping anything else beyond the gateway. I can perform DNS queries and when I try to ping, it finds the appropriate IP address.But from the outside, I can ping the PUBLIC address (It's a 1 public to 1 private address NAT, not 1 public to multiple private). I've tried it with IPTABLES on and off, with no change.
View 11 Replies
View Related
May 26, 2010
I have Mandriva One 2009.0 (192.168.1.100) on one box and Mandriva Free 2010.0 (192.168.1.118) on the other. I can ping router (192.168.1.1) from both of these boxes but I can't ping one box to the other and the other way around. What's going on?.
Do I have to change some settings in router?. Or is it firewall issue on those two machines?. Both of these boxes are connected by cable. Symbol of the router: TL-WR340G.
View 2 Replies
View Related
May 21, 2009
I have connected xp and fedora through crossover cable . xp has ip address 192.168.0.1/24 (manually assigned) fedora has 192.168.0.2/24 with default route equal to 192.168.0.1
I can ping fedora from xp computer but i can't able to ping xp from fedora computer.
I have manully edit the /etc/sysconfig/network-scripts/ifcfg-eth0 file with correct subnet mask and ip address because when i tried to give ip address manully in network manager the subnetmask is replaced with gateway address don't know why.
Now i want to share internet through crossover cable . xp is connected to internet through wireless usb adapeter.
View 8 Replies
View Related
Oct 15, 2010
I have installed redhat 9 on my pc i want to configure samba i connect these two pc with cross cable i given both c class ip add when i going to ping from linux pc getting ping but xp getting ping
View 3 Replies
View Related
Jan 8, 2010
I have am having some network troubles. I can't access my samba share. Trying to resolve this I realized I couldn't ping from ubuntu to windows. (default ubuntu.jaunty.server.x64)
Windows IP..192.168.002.021
Ubuntu IP...192.168.002.020
Laptop IP...192.168.002.031
Router IP...192.168.002.001
[Code]....
View 5 Replies
View Related
Jan 11, 2011
I have ubuntu 10.4 running on both my desktop and laptop. Both machines are connected to the router in wireless mode with Wifi.I can access internet from both machines without any issues, however I cant ping one machine from another. (and vice versa)
View 4 Replies
View Related
Apr 23, 2010
I try to ping with php : exec("ping -n 1 $ip",$output[],$retval); it works fine in window. but in linux i got this error : ping: icmp open socket: Operation not permitted are there any ways to solve this ?
View 5 Replies
View Related
Mar 24, 2010
My Internet Router is on 64.1.1.1
I have 2 NICs in my Linux Box: (Firewall OFF)
Eth0 -> 64.1.1.2 and cross-cable connected to Internet Router (64.1.1.1)
Eth1 -> 192.168.1.1 Connected to switch hub
Default gateway of Eth0 is to Internet Router (64.1.1.1)
From Linux-Box.. I able to ping to internet(ie. ping 202.158.3.7)
Client PC: (Firewall OFF)
Default Gateway is 192.168.1.1
I am unable to ping to internet (ie. ping 202.158.3.7)
View 1 Replies
View Related
Feb 23, 2011
This applies to my 2 opensuse PC's, my Windows PC is fine.I can ping a hostname, say "PC1" but I can not ping PC1.domain.local (even the host PC can not ping it's own FQDN). When I ping just the hostname the ping stats even list the FQDN.Onto the next issue, since all my PC's, have the domain prefix domain.local, my Synology can not. I can ping it's IP and that is it. I can resolve it's name with nmblookup just fine tho and that is what is killing me. How is this not resolving.Even weirder, I can browse to "Synology" in Network Servers under places on the slab.
View 3 Replies
View Related
May 13, 2011
Even ping google's ip address doesn't work. unknown host error using backtrack4 able to browse net with these settings.
My network settings:
What's the problem with these settings...
View 10 Replies
View Related
Feb 11, 2011
I have a windows 7 desktop hardwired to my wireless router and a windows xp laptop connecting wirelessly on the same network. I am able to ping the windows 7 box by its ip address but unable to do so by its hostname. This is very inconvenient since I would like to set up a share by hostname (doesnt change) and not by ip (changes occasionally since its dhcp).
View 8 Replies
View Related
Feb 4, 2010
Previously posted under "Wireless Connection Can't Even Ping Router".I've been using Ubuntu for two years. About a year ago I switched to Kubuntu because I prefer the KDE desktop. Two weeks ago I bought a new laptop: Dell Vostro v13. I installed Kubuntu 9.10 from the live CD and everything worked! Well, almost. I also set up a home wireless network with a new Belkin N+ router from WalMart. When I try to connect to my router, the Plasma Network Manager reports that I'm connected and the assigned IP address, but I'm not truly connected! I can't even ping my own router, all packets are lost.
This problem is intermittent, sometimes I connect fine. I dual-boot with Windoze7 and it connects without problems. Also, if I connect with Windoze, then re-boot into Kubuntu, it seems to "wake-up" the connection somehow and it works. I might also add that I connect without difficulty to other routers in my neighborhood, at work, in airports, etc.My old laptop was also running Kubuntu 9.10, and it connected to the Belkin router without problems, although it was a different wireless card and driver. I also tried Ubuntu 9.10 from the live CD and it also reported a connection, IP address, etc. I couldn't ping the router from that connection either!
View 7 Replies
View Related
Feb 1, 2011
I have a edimax USB wireless and as soon as I plugged it in it worked i.e., it is able to connect to a wireless.
[Code]....
View 5 Replies
View Related
Aug 5, 2010
When i ping www.google.es, i get something like:Quote:
ping www.google.es
(wait 20 seconds)
64 bytes from 66.249.92.104: icmp_seq=2 ttl:53 time=80 ms
[code].....
View 2 Replies
View Related
Jun 9, 2010
i have Fedora 13 dual booting with Win XP and i cannot ping my router in Fedora. just reinstalled and i'm still unable to ping my router.everything looks like it was installed correctly except in the ifcfg-eth0 it has IPV4_FAILURE_FATAL=yes dont think this should have a value of yes.
View 13 Replies
View Related
Dec 16, 2010
In my office i have a network of 172.16.31.0 and a squid proxy server running, all other systems have windows XP and one system has centos. On centos system i have three lan cards and i want to test some things on it. So i assigned another IP on it of range 192.168.7.0/24 and same range on another windows system. And all the systems connected through a same network switch.
Unable to ping between Centos and Windows system. If i ping from one centos to windows system with the series of 172.16.31.0 then it replies very well but same thing is not happening in other 192.168.7.0/24 IP series.
View 2 Replies
View Related
Mar 24, 2010
My Eth0 has 3 virtual Ethernet (eth0:1, eth0:2, eth0:3)
Eth0 -> 202.1.1.1
Eth0:1 -> 202.1.1.2
Eth0:2 -> 202.1.1.3
Eth0:3 -> 202.1.1.4
I am unable to ping them (202.1.1.2 - 202.1.1.4) from Client's PC.
View 1 Replies
View Related
Jul 21, 2010
The wireless connected hosts do not respond to pings from wired ones or other wireless ones. And all the wired connected hosts respond to pings from any wireless one. The same problem applies also to ssh connections exactly as in the ping issue.
The switch the ADSL modem/router and the Access point are all 3 different machines correctly connected to each other. I do not have a firewall in any of my hosts, all run Slackware 13.1, the wireless ones use "wext" driver and not "ndiswrapper". All wireless hosts login successfully, WPA & DHCP works fine and internet connection goes without a problem. But the fact I can only connect from a wireless host to a wired one is puzzling.
View 7 Replies
View Related
Jun 7, 2010
when I was still at my university room where the connection would work after a few reboots. After moving back home the connection worked on and off for a day before not working at all. NetworkManager is telling me that I am connected and have an ip address, etc, but nothing is able to get an internet connection. I am able to ping myself but am not able to ping my router. Everything works fine on M$ and other PC's on the network, it's just my ubuntu 10.04 that is playing up.
View 9 Replies
View Related
Mar 1, 2011
This morning my Ubuntu 10.10 Meerkat desktop suddenly lost internet connection, but stayed connected to my netgear router. After the usual "tried turning it off and on again" methods didn't work, I booted into my Win Vista partition to find that connected no problem. I have another Ubuntu netbook and a Windows 7 laptop in the house as well as an Android. These all connect fine. It appears to be just the desktop Ubuntu.
I can ping my router 192.168.0.1 and log into it's UI via browser. I can also ssh to the box. My router does not do any filtering or blocking. I've tried disabling the firewall and changing the nameservers in /etc/network/interfaces and dhclient.conf as well as the network manager. The network card is a Belkin 54g but I can't remember the exact model no. it was bought years ago.
Code:
$ping www.google.com
PING www.l.google.com (74.125.230.115) 56(84) bytes of data.
^C
--- www.l.google.com ping statistics ---
30 packets transmitted, 0 received, 100% packet loss, time 29004ms
Code:
$traceroute 74.125.45.100
traceroute to 74.125.45.100 (74.125.45.100), 30 hops max, 60 byte packets
1 * * *
...continues to...
30 * * *
When I do a restart of the networking service it spits out the error:
Code:
Ignoring unknown interface wlan0=wlan0
However, as I said the wireless itself works.
/etc/network/interfaces:
Code:
auto lo
iface lo inet loopback
iwconfig:
Code:
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11bg ESSID:"haters gonna hate" .....
View 1 Replies
View Related
Jun 4, 2011
I'm running Lucid (10.04), dualboot vista, but I'm having some issues with my wireless USB dongle. Previously (in a different) location, the network wasn't showing in my wireless network tab, and that was never resolved. But now I'm in a new place, and what I'm finding is that my network is showing up in the networks tab, and I can select it, enter the PSK, and it starts to interrogate, but never seems to manage all the way through to getting internet.
Im not sure whether the machine is able to connect to the network, but not the wider internet, or what. The only indication I'm getting is that its connecting for a length of time, then gives up. I have managed to get the update tool pop up - so I'm not sure if thats an indicator of some internet connection or not (presumably it only generates the list of packages to update when it can connect to the net and see what updates are required...) I believe its also managed to get 1 or 2 ping packets through to the internet. I'm driving a belkin N-wireless USB adapter, N10117.
View 1 Replies
View Related
Dec 15, 2010
I have a router which have 4 ethernet ports(eth0,eth1,eth2,eth3,eth4 ) & One ADSL Line & One USB, I need to configure My router eth3 as a WAN & eth0 as a LAN using iperf, I am going to findout test a my Application(using iptables) whether my application is correct or wrong As of now I configured like server pc1(192.168.1.230)--->eth0(gw)(192.168.1.1)Router--eth3(gw)(192.168.2.1) -->pc2(192.168.2.157). For eth3 as a WAN and eth0 as a LAN. But I am not able to ping between two pc's.
View 1 Replies
View Related
Sep 27, 2010
i have installed linux debian in my computer but i have aproblem , i have a ping only on my computer itself , not to gateway or other computers on my network .
Ip : 10.0.88.9
Gateway : 10.0.88.1
dns :10.0.88.7
note:when i have installed system i have no internet connection so it is not installed updates
View 1 Replies
View Related
Nov 24, 2010
I did a new install of Fedora 14. This is my first time using Linux seriously and I am trying to figure it all out.
I am able to ping my hostname of sinbad only from the linux system itself. On all my windows boxes, I am not able to ping it. I can only ping the IP address.
Here is /etc/hosts:
Quote:
I disabled the firewall, disabled SELinux, and still not able to ping it.
Here is the info from ifcfg-eth0 :
Quote:
Quote:
View 5 Replies
View Related
Apr 15, 2011
I have installed Micro Core onto a usb of mine and am running it on my laptop. I have been able to successfully obtain a connection and valid ip with my router. As you can see below my wireless connection seems valid computer-end and on my router's page it comes under the list of attached devices.Although this is all fine and dandy, I'm am unable to ping my router or any other computer on my network, I am also unable to ping my laptop from other computers on the network. Also by the looks of it I have having no trouble transmitting, but I am not receiving any packets.
[Code]...
View 3 Replies
View Related
