I recently installed NISTnet on a RHEL 5.3 box after much turmoil and can finally load the module properly. My problem is I am not certain how to configure NISTNet to use two specifc NICs.Is it supposed to automatically see both NICs and route between them accordinly. In my current setup I do not see a delay even when it is added/updated without error to xnistnet.
View 3 Replieshow to install nistnet module in ubuntu 9.10?
View 2 Replies View RelatedCannot activate network device eth0!"device eth0 does not seem to be present, delaying initialization".i cannot find my network card while i set up network configuration Now I use dual boot window 7 and fedora 9,I cannot find my network card in select network adapter while network configuration ,i have a network card Atheros AR8132 PCI-E fast Ethernet controller NDIS(620)and for wired in Accer laptop .
View 1 Replies View RelatedI am trying to get Fedora F11 to see my network PC's and have searched high and low trying to find the problem. I have a local network with several WinXP, VISTA, MAC, and MYBOOKWORLD, devices as well as 2 Fedora machines. Everything sees everything and is able to transfer files just fine except the two Fedora machines.
They see nothing on the network. All the other machines do see the Fedora machines, and are able to transfer files to them. Both have the /var/ directory shared. This network worked just fine back when running Fedora FC5 and FC7. After upgrading to FC9 I was unable to see the network from the Fedora machine, but did not have a need to do that so ignored the problem. After installing FC11 on another machine, I now have a need for the two machines to see the network and transfer files. The error I get is nearly identical on both of the Fedora machines.
[Code]...
COWBOY is the workgroup all of the computers are in. On the FC9 machine I do not get the error, the screen just goes blank when I click on "COWBOY" The other difference is that on the FC11 machine it does see itself and has an icon next to the "Windows Network" icon. I can click on it and mount the shares. They do not show up in the windows network.
I have Fedora 14 installed in VirtualBox, running in MS Server 2008.There is Oracle 10g software installed in Fedora 14.How can I configure connection to Fedora 14 from MS Server?Anything I've done is useless.I need to open port 1521.I can ping Fedora from MS Server. I can make connection "telnet localhost 1521" succesfuly in Fedora. But that's all.
View 1 Replies View RelatedI want configuration a DNS server for my area! What DNS server software is better than other software?
View 4 Replies View RelatedIn Fedora 12 Network Configuration tool the Activate and Deactivate buttons are disabled.I thought that this was due to Network Manager overriding it but I've disabled that in order to set a static ip but the buttons are still disabled.
View 5 Replies View RelatedI am doing network config of my laptop. I'm new to Fedora, so I'm not sure how it goes ...
I have an Ethernet device (eth0) and a wireless device, wlan0
Status in system->administration->network:
Tab devices:
eth0 : active
wlan0: inactive
Tab Hardware:
eth0: system
wlan0: configured (description: b43)
Double clicking on the wlan0 line gets you to Network Adapters Configuration, where adapter b43 grayed out) is associated with device wlan0. So far, so good (I did all the fwcutter stuff, so I assume this is the result). When I installed the system (from installcd, then update, then install broadcom-wl, ...) I configured it to be started up with network manager, automatically on startup. I managed to get it working exactly once in that session.
Problem is, it doesn't start up and the wireless is not even visible when you click the network manager icon. For that matter, eth0 does not start automatically either, but at least there is a button to start it in network manager. Coming back to the tab devices, clicking on wlan0 allows you to click on the activate button ... but there it says: Cannot activate network device wlan0! b43 device wlan0 does not seem to be present.
I have a lab of 10 computers with ips from 192.168.1.120 to 192.168.1.130 the server's Ip is 192.168.1.116When I am on client computer I type the server's Ip address on the browser and it works. All i want is that instead of entering my servers Ip I could just enter an address like: example.lan
View 3 Replies View RelatedRecently, I had the courage of installing Fedora 11 on my laptop while risking of trashing my Windows XP. Fortunately, the installation went fine and windows and fedora seems to be working together. But I needed to reinstall Fedora because I didn't do the partitioning right. After that the problem arises. I couldn't connect to the wlan. The first installation it was working fine. Now I can't. I select the network, enter the password and then it just says "Disconnected" or something like that then nothing else happens. So I had to reinstall it again thinking I did something wrong on the installation. But still it wasn't working. But it seems to be working when I boot from the live cd. I must have messed up my network configuration.
View 7 Replies View RelatedThis may fall under the "ain't broke don't fix it" category but it's driving me nuts. I've got the Broadcom 4322 wireless adapter in my laptop and it works fine with broadcom-wl driver and kmod. However there is no ifcfg-eth1 file and the card does not show up in system-config-network.
View 2 Replies View Relatedi have installed fedora12 in my compaq laptop.i am under proxy..i just gave the local ip address to the laptop..and try to activate the etho device..but ..all the activate,deactivate,delete buttons are grayed out..they are completely looking dead..
View 2 Replies View RelatedI'm having a bizarre problem where my network connection stops working randomly. At first I thought it was a DNS issue since Firefox simply chilled out on "Looking up [hostname]" until it timed out, but after further investigation (pinging IP's, "host" and "dig" being unable to reach servers) it became apparent that I couldn't even access the DNS servers i.e. the Wicked Connection of the East was most sincerely dead.
There are two strange things about this: one, there are no errors except "timeout". The network manager is happy, Firefox is happy until the lookup fails... Two, the failures only start *after* DHCP configuration. DHCP configuration never has any trouble sending or receiving packets. I'm going to try static IP and whatnot to see if that helps, more information later.
I have b43 wireless. In network Configuration on system->administration the interface it appears as inactive it appers in hardware also as b43 associated to wlan0 but i cannot have access to any wireless network. What i have to do to put this b43 to work.
View 11 Replies View RelatedI was playing with my debian server when something went totally wrong while i was editing something on my network interface,i removed those crap that i wrote and left the network interface configuration as it was
Like for example after re-editing my network interface,it was like :
As i did a network restart, i get this error saying :
There is already a pid file /var/run/dhclient.eth0.pid with pid 2802 killed old client process, removed PID file.
What is this error and how can i fix it,because every time im re booting my server i lost my network config.
I have a Canon MX860 network printer but I cannot get it to connect with my openSUSE 11.2 computer
View 9 Replies View Relatedi am using intel hardware on this working on suse linux 10.2 . i am not able to configure the network card IP address I have tryed using dhcp and static both way. Currently intel DG41RQ network card is assembled in my system. by using command ifconfig i can see only lo but eth0 is not displayed their.
View 4 Replies View RelatedI've just installed OpenSuse 11.3 on my new laptop but I've skiped the network configuration during the installation of system, but after that when I use the command : dhclient eth0 I'll be connected without any problem except when I reboot the system, I should retype the command to connect
View 3 Replies View RelatedI'm planning to use Debian as the OS for a firewall machine, which will sit between my internet connection and the rest of my computers. Now my network is all wired, no wireless whatsoever. I'm using the onboard the motherboards cat5 socket which seems to be using the VIA rhine driver and I'm also using a 3com 100MBps card.
I can list the machine spec if you want but it's nothing special, an old Athlon 64 rig with 1gb ram and an OEM motherboard, it all seems to work ok apart from the internet doesn't' seem to work. Lenny seems to detect both cards ok and I even used the net install CD and it managed to download everything using the 3com card.
The strange thing is when I'm in Lenny, I can't seem to connect. I can ping google, but when I try and view a webpage, the browser just sits there with a while screen... Could it be that using 2 network cards is confusing Debian? Right now I've only got the modem hooked up the the 3com card, and nothing connected to the onboard network card.
setup my static network connection Here are my details :
IP : 172.16.152.137
Subnet : 255.255.255.192
Gateway : 172.16.152.191
Primary DNS : 172.16.0.1
[code]....
but after this setup when i restart my network #service network restart while bringing up the eth0 the following message is displayed before [OK] - RTNETLINK answers : Invalid Argument now it seems either this setup is wrong or not sufficient to set up the connection, whenever i try to ping 172.16.0.1 it showing connect : Network is Unreachable
I am trying to configure the BMC on my server so I can remotely power/boot/check on the system via IPMI.The server is on a switch with an IP address to the outside on eth0.It is my understanding that the BMC gets assigned a non-routeable IP (192.168.x.x, etc), but it runs off the same NIC, eth0. Is that correct?How is the switch port configured to have two IPs on the same NIC/cable? Or do I need to have a second NIC configured for the non-routeable IP?
View 1 Replies View RelatedI'm opening up Network and it asks me for the root password. I enter it and the program comes up. I enter a static address for both eth0 and eth1.
I don't see a Save button. Eventually I get out of the configuration tool. The next time I run the tool, my static addresses have not been saved.
I've illustrated it on this picture, and hope to get the help i need to set it up... [URL]Thow it has to be furture secured, in that meaning it has to be abel to attach a eth2 on the main server, so i have 3 NIC's.Also, i want to have fully controll over ports, IP/MAC's and data overview (Such as a view of the files beeing downloadet/uploadet).
View 3 Replies View RelatedI installed testing on my netbook with cd1. and too my suprise it didn't even include something as important as network manager. all i want to do is connect to my wired internet, install network manager, then install my driver for card. if i can just get wired working i will be homefree. the directions for installing my wire3less driver look super simple.
View 4 Replies View RelatedI have a server and I have a few computers connected to it via a Airport Extreme. Using network cable. So when Im uploading,(ftp) IE using a lot of the network "space" the other computers on the network gets kicked out. So what is going on? My Airport Extreme is doing fine, but my other clients just get kicked out. If I pause the upload, everything is okay again. The whole network is 1 gigabit, clients, everything.
[Code].....
I have a computer home that I use a web server and I had Lenny in it for about a year and didn't experience any problems. Recently I needed to update to Squeeze just to be able and use part of my server for a game(which I couldn't compile on Lenny). I renamed every "lenny" word in the /etc/apt/sources.list with "squeeze" and ran dist-upgrade. Everything seemed fine(minor some "link not found" warnings). I also had some minor problems with the mysql configuration after the update but I managed to fix them all. Then I noticed that after some hours(not sure how many) I can suddenly not reach my computer via ssh. Neither can I visit my website(even from the local network). The computer doesn't appear either in the router's "attached devices" list. My other computers have no problems so it can't be a router issue.Pinging from the server to the outside world doesn't work. I tryied "sudo /etc/init.d/networking restart" and that didn't do anything. The only way to fix the problem is by rebooting but then again after some hours the problem is still there. Do you guys have any idea what the problem can be?
View 1 Replies View RelatedHow to do Network Configuration in Kubuntu?
View 2 Replies View RelatedI have a weird problem with my /etc/network/interfaces configuration. I have the most simple static setup possible: Code: # cat /etc/network/interfaces
auto lo
iface lo inet loopback
auto eth0
[code]....
I just installed slackware 13 with kernel 2.6.33.4 , everything seems to be ok so far, but the system does not load eth0.Ive tried netconfig , ive tried to configure rc.inet1.conf by hand and run rc.inet1 eth0_start but nothing works.After running netconfig the system says everything is ok , but when I run ifcofnig there is no eth0.
View 3 Replies View RelatedI have installed VirtualBox on Ubuntu 9.04.Two Guest Machine Fedora 9 and Fedora 11 is installed on the same. I selected NAT as Ethernet Interface and now I can see 10.0.2.15 and 10.0.2.15 as the both interface address in eth0 respectively.I can ping google.com and working.Now I need to make fedora 9 as server and fedora 11 as Client. How Can I make them in same network.I cant see Bridge Network anywhere only NAT, Host Interface, Internal Network..are available.
View 1 Replies View Related