In Fedora 12 Network Configuration tool the Activate and Deactivate buttons are disabled.I thought that this was due to Network Manager overriding it but I've disabled that in order to set a static ip but the buttons are still disabled.
View 5 RepliesI had installed Fedora 12. I am using 4 LAN Cards. All these cards were configured using network manager, but i am not able to acivate /deactivate these cards using acivate /deactivate buttons since they got disabled. I could activate the cards by running /etc/init.d/restart network. Anyone knows why the acivate /deactivate buttons in network manager are disabled .
View 1 Replies View RelatedI have a problem with Network Manager ....Activate , Deactivate & Delete Buttons are invisible (have a silver colour) ...!
So, i can't connect to the internet .....by the modem ...! (dial-up). _wvdial in terminal doesn't work fine
I cant get System/Administration/Network to activate my wireless card - when I click on the card, the activate/deactivate buttons are greyed out. Network manager sees the connection when I click on 'edit connections'. Which files do I need to edit to sort this out, or do I need to print here to help find a solution?
View 1 Replies View Relatedhow I can activate and deactivate the laptop touchpad?
View 8 Replies View RelatedInstalled Fedora 11 yesterday and was trying to use the Admin->Software Update but initially it complained about no connectivity (this is happening even though I was able to browse the web via FireFox!). So I went to Admin -> Services, and restart the Network Manager. It was then able to download about 250 updates. However, when I clicked on Install after the download, it says it was disconnected. When I went into Admin->Networking, I found out that the eth0 interface is Inactive. However, the Activate button is greyed out. I have been searching in the User Guide, the FAQ, the bugs section and have been unable to find out how to fix this. If I goto the command prompt, and typed in "ifconfig" I can also see that there is no IP and no packets transferred.
View 5 Replies View RelatedI've been running F10 since it first came out, and I was happy to see it was the first Fedora release that automatically recognized my Atheros wireless card. I have to run system-config-network and press the "activate" button when I start the machine, but that's ok and no big deal. But today, for whatever reason,in system-config-network, the "activate" and "deactivate" buttons are grayed out and I cannot start the device so I have no network access. When I boot the machine into Windows, it works fine.
View 2 Replies View RelatedHaving trouble with wireless and FC11, eth0 is ok. When I try to activate wlan0 through system-config-network 1.5.97, I get msg: Error for wireless request "Set Mode" (8B06) : SET failed on device wlan0 ; Invalid argument. Determining IP information for wlan0... failed. This is a compaq laptop.
<uname -r>
2.6.29.6-213.fc11.i686.PAE #1 SMP Tue Jul 7 20:59:29 EDT 2009 i686 athlon i386 GNU/Linux
<lspci>
The wireless card is Atheros Communications Inc. AR242x 802.11abg Wireless PCI Express Adapter
(rev 01)
When i wan to activate device in network configuration, it pop out with "CANNOT ACTIVATE NETWORK DEVICE ETH0". There is a sentence after this also : "rlt8129 device eth0 does not seem to be present, delaying initialization."
View 14 Replies View RelatedI have downloaded and installed Fedora 10.Now I am setting up the network and in the 'network configuration' it finds the wireless device (ralink) in the 'hardware' section of the configuration - I set this to eth0 (it originally set itself to wan0 and I still had the same problems, now it doesn't give me the option to put it back to wan0).Now I goto the devices tab and try to set up the device with eth0 - which it seems to find.But when I goto activate the device it tells me that eth0 cannot be found
View 2 Replies View RelatedI just added a 2 port network card to a system that is running Fedora 11, but it is INACTIVE. I open the Network Device Control to activate it but there is no network ports in Network Device Control. It is empty.It looks like the system recognize the card and loaded correct driver.
View 4 Replies View RelatedI just brought up FC12 on our VSphere to begin testing..The nic did not configure properly for some reason.. I was able to go to command line, and do an "ifup ifcfg-eth0" and DHCP got an address. Go into GNOME - System-Administration - Network , or system-config-network the "Activate/Deactivate" is greyed out. Also, GNOME - System-Administration - Network Device Control show NO device..
View 1 Replies View RelatedI've been searching the in User CP an option to deactivate/delete my account without any success.
View 4 Replies View RelatedI have just installed FC12 on my machine - and gone Windows free for the first time ever. Now I do use various flavours of Linux on a daily basis but not from an installation/sys admin point of view so my questions here may seem a little basic but pleas eindulge me if you will!
Now, my network connection works perfectly well under the following scenarios.
1) FC12, wired to router
2) FC12, wireless, SSID broadcast enabled
3) Ubuntu (laptop), wireless, SSID broadcast DISABLED
The only scenario that does not work is FC12, wireless with SSID broadcast disabled.
I can only assume that it is an issue with my USB modem (a linksys WUSB54GS) since the same set-up works fine from my laptop running Ubuntu with an internal wireless card.
Now, I know from reading the forums that it's pretty easy to get around a disabled SSID broadcast but this is an itch I just have to scratch....what the hell is causing this problem?
nm-tool ouput is as follows:
I have tried using wpa_supplicant but I am not sure which driver I am using here - is it ndiswrapper per chance?
(Driver: rndis_wlan)
How I can connect once again to my wireless router with SSID broadcast turned off.
Just upgraded from F13 32bit to F14 64bit. The Realtek ethernet controller on my motherboard is now totally disabled. The module r8169 is loaded, but the light on the port is not lit. When I insert the cable the light quickly goes on, then off again.
Needless to say that ping to LAN says destination unreachable.
I'm working on setting up access for our developer via Telnet, we are on a local network behind a physical firewall. I set up the standard Telnet service for Fedora15 and from localhost I can login via any user and root.... However I cannot login from another terminal on the LAN, even though I can ping and FTP to the fedora15 box. I added the firewall rules for telnet, that did not work, so I disabled the firewall, still cannot get a connection via port 25. I feel either port 25 is closed in another manor or the telnet is restricted to the localhost.
Also I cannot login to root to configure the Firewall Desktop GUI, only standard users, is this an issue? I also cannot login to the console as root even though I use the correct password.I can only su to root and sometimes it is a PITA. There must be some settings to clear these issues up...
The specs on my Pavilion DV6 says it has a 5650 Radeon HD card.lspci shows:01:05.0 VGA compatible controller: ATI Technologies Inc M880G [Mobility Radeon HD 4200]02:00.0 VGA compatible controller: ATI Technologies Inc Redwood [Radeon HD 5600 Series] (rev ff)TWO cards? Currently the first one shows up in the system information but, knowing it has a 5600 series card,I'm guessing the laptop has a cheaper model with a 4200 integrated card where mine has a 5650 added...thus both showing up. I need to figure out a way to ignore the 4200 card and use the second.
Both drivers are contained in the same package from Radeon. The system information shows VESA:M880G as the driver. How do I go about blacklisting the M880G driver so the other one ('Redwood', guessing from the content of the lspci output) can be loaded?Or am I completely wrong about what needs to happen here? I do not see anywhere in the bios where I can deactivate the 4200 chip.[edit] After checking the specs on the laptop (and it's other derivates), i twould seem that there is no 4200 series card on any of the cheaper machines....no sure hwat gives. I've downloaded some stuff on X and see if I can create a xorg.conf that will load the appropriate driver.
I'm likely going to remove the akmod proprietary drivers and go with the open source 'radeon' for a while to see how it goes.[/edit]EDIT 2:The thing thats going on here is 'hybrid graphics' which I had heard of in desktop but didn't realize that it was in laptops.There is currently work going on to get the configuration working properly. The 4200 card is supposed to run when on batteries and switching automatically to the 5650 when the power is plugged in.
ill try to write in english as well as i can.So, my problem is this:Fedora has Nouveau drivers installed by default, and I want to install nVidia propietary drivers.When i try to install Nvidia propietary in runlevel 3, it says that ive to deactivate or unistall Nouveau.
Ok, i do that, but the next reboot, the tty doesnt work (black screen) and i cant access runlevel 3 correctly and i cant install propietary driver. I have looked this in google and i didnt find nothing, so i ask here.
I have been running FC8 on this IBM T23 with a D-Link wireless adapter. Using MadWifi this has worked fine with Network Manager disabled. But now I have nuked that installation and replaced it with FC10. Network Manager is nice, and I would like to use it. And it kind-of works. Network Manager recognizes my router and all my neighbor's routers, but I can't connect.
[Code]....
Cannot activate network device eth0!"device eth0 does not seem to be present, delaying initialization".i cannot find my network card while i set up network configuration Now I use dual boot window 7 and fedora 9,I cannot find my network card in select network adapter while network configuration ,i have a network card Atheros AR8132 PCI-E fast Ethernet controller NDIS(620)and for wired in Accer laptop .
View 1 Replies View RelatedI tried connect to internet through iPhone (bluetooth tether), so I followed one tutorial... It said I have to change "networkmanager" to "ifup" in yast>network settings, and make some other changes... I did it, but I couldn't connect via iphone... OK... I put back all changes, also changed ifpu to networkmanager.
After reboot, Knetowrkmanager gives me "network management disabled" on startup, instead of list of my networks.
Of course, I google for solution, but without any luck. And then, I don't know why, I killed Knetworkmanager, start it again, and.. it worked!
But now, I have to kill it, and start again always, when I reboot my laptop...(HP Compaq 6720s, BCM4312, KDE 4.3.4)
I have an Asus EeePc 1001PX and on resume I have "Network Management disabled", neither wired nor wireless interface can be configured, the NM icon is greyed out. running ifconfig shows eth0 and wlan0 have disappeared completely.
I found 2 options:
1. https://bugs.launchpad.net/ubuntu/+bug/555571
2. Network management disabled after start on 11.2 - openSUSE Forums
but I don't have the /var/lib/NetworkManager folder at all
I've installed Debian 8.1 on Lenovo G50-80 Touch. Ethernet is OK but the WiFi adapter is disabled. How can I enable it?
Code: Select alluname -a
Linux debianserv 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt11-1+deb8u3 (2015-08-04) x86_64 GNU/Linux[code][/code]
[code]lspci -nnk | grep -i net -A2
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 10)
Subsystem: Lenovo Device [17aa:3821]
Kernel driver in use: r8169
03:00.0 Network controller [0280]: Qualcomm Atheros Device [168c:0041] (rev 20)
Subsystem: Lenovo Device [17aa:3545]
Have been working most of the day on this usb full install (Jesiie xfce) trying to make it leaner/faster and trying to get rid of minor annoyances like "watchdog: watchdog0 is not shutting down" (couldn't btw), finally managed to disable "You have mail" by commenting out "session optional pam_ mail.so standard" in /etc/pam.d/login. Every little change registers in terms of seconds of boot time saved and how the system responds because, well, i'm booting from a usb 2 drive.Followed some suggestions from "Reduce Debian", removed cups-common, some foreign language locales and man pages. what i can safely do with systemctl.
View 14 Replies View RelatedHow ubuntu 9.10 netbook is36 activate its network connection?
View 4 Replies View Relatedi'm try to find what i can do to reactivate the network icon (where i can select the wifi network i want to connect), which are usualy on the 'tableau de bord'
View 2 Replies View RelatedCannot activate network device eth0!" device eth0 does not seem to be present, delaying initialization". i cannot find my network card while i set up network configuration
View 8 Replies View Relatedi have installed kubuntu in ubuntu 10.04 lts, the problem that i have right now is that whenever the laptop hibernates the network manager is disabled!! so i always have to go to the ubuntu desktop enviroment in oder for me to activate the network kubuntu.Is there a way i can just activate the network manager without going to ubuntu desktop enviroment??
View 1 Replies View RelatedNew to ubuntu. I love the OS. Everything works great except for the network connection. It tells me I need to activate the b43 drivers with fwcutter, but here are the following problems:
1) I can't download and install the drivers b/c I can't connect to the internet wired or wireless.
2) I can't find the website to download the appropriate drivers (I've looked for hours)
3)I'm not too sure how to install them since I don't have a background in coding.
I really like ubuntu, I just need network working.
My Network manager is missing (it is usually has a short-cut on the desktop-bar, which are monitor pictures, next to the sound short-cut). Does anybody know how to activate it again (terminal-based command or etc)? See my attachment, i made a circle sign on the missing network-manager.
View 3 Replies View Related