General :: Network Configuration On VMware Esx?
Aug 2, 2009
I have installed VirtualBox on Ubuntu 9.04.Two Guest Machine Fedora 9 and Fedora 11 is installed on the same. I selected NAT as Ethernet Interface and now I can see 10.0.2.15 and 10.0.2.15 as the both interface address in eth0 respectively.I can ping google.com and working.Now I need to make fedora 9 as server and fedora 11 as Client. How Can I make them in same network.I cant see Bridge Network anywhere only NAT, Host Interface, Internal Network..are available.
View 1 Replies
ADVERTISEMENT
Oct 3, 2010
I have been using VMware Player for some time to host Fedora VMware images on Windows XP. I have been using Fedora 11 and 12 (both 32 and 64 bit) and recently started to use Fedora 13.
I use as a base the images provided by thoughtpolice. http://www.thoughtpolice.co.uk/
I usually install VMware tools and also keep the images updated (yum update) which sometimes changes the kernel.
I have recently had problems with the snapshots not having a network when I restore them. So far I don't have the problem with Fedora 11 and do have it with Fedora 12 (but used not to). I do have it with Fedora 13.
In each case the problem goes away when I uninstall the VMware tools and comes back when I install them again.
One of the symptoms is that SElinux complains about not being able to do something with /var/run/vmware-active-nics.
It looks to me that something is incorrect in the actions being taken when the snapshot is being restored. It does not happen every time and sometimes the network restores itself.
The network can be restored by rebooting the image.
View 12 Replies
View Related
Apr 7, 2010
I installed and tested both Windows server 2003 and Red Hat 9.0 with vmware workstation7. After installing 2003 can access internet but Red Hat can't. I want to test squid proxy server, send mail server, webserver etc. So, I would like to know how to setup WMware's network configuration for Red hat can access internet.
Below link is the configuration of VMware network setup both Server 2003 and Red Hat.
Here is Red Hat Configuration:
http://i64.servimg.com/u/f64/11/74/16/17/linux10.jpg
Here is Windows Server 2003 configuration:
[url]
I am using wireless connection to access internet.
View 1 Replies
View Related
Dec 31, 2010
I set my Network Adapter to the NAT setting, and ran an ifconfig for my machine. All the I got back was eth0 and lo. eth0 has the static IP configured I configured back in the days where I was running my VM Bridged with DHCP. Do I need to reconfigure my eth0 settings now and if so how?
View 1 Replies
View Related
Aug 5, 2010
I'm trying to access the VMWare console from firefox using the VMWare plugin. The problem is that it doesn't work on Firefox version 3.6.8. So how can I access the console?
View 2 Replies
View Related
Apr 21, 2010
I created a VMware Workstation VM with OpenSUSE 11.2. When I copy the VM to a new location the network configuration disappears. If I go into the networking control panel and save, the interface names are changed. Originally had 2 nics as "eth0" and "eth1", copy the vm, configure network and the interfaces are now "eth2" and "eth3". How do I get back to my original configuration?
View 7 Replies
View Related
Aug 21, 2010
I'm doing a school project for my masters and ran out of time setting up the system. Unfortunately, I can't easily use the removable hard drive I had at school. The school does permit students to buy a portable hard drive and use VMware player to run virtual machines, at the student expense if they want to be able to work at home, vs the hard drive they provide as part of the tuition. I'm planning to borrow one for this.
If I can get the DNS server and DHCP server running with vmware, how easy would it be to either copy the conf files for dhcpd and bind from the portable drive to the removable drive (looks just like a regular SATA drive once it's in the machine) via a flash drive or e-mail? Alternately, move the configuration files for CUPS, SSH server, and NFS including the part about excluding Root for NFS and SSH to the virtual machine?
Which do you guys think would be easier? Also, could somebody list the files I'd need to move the configuration for Fedora 12 for the situation I described just to help me double check that I got everything? Assume everything else is what is preinstalled off the DVD for Fedora 12, although I did yum install all those services and when possible the system-config utils.
View 5 Replies
View Related
Feb 6, 2016
How to make debian desktop full screen in vmware? I am using vmware workstation ...
View 1 Replies
View Related
Mar 22, 2016
Following VMware recommendations on how to change linux I/O scheduler for guests, I'm trying to do it on my VM machine running Debian Wheezy. At the moment I'm running kernel backports:
Code: Select all$ uname -a
Linux brutus2 3.16.0-0.bpo.4-amd64 #1 SMP Debian 3.16.7-ckt20-1+deb8u3~bpo70+1 (2016-01-19) x86_64 GNU/Linux
The default I/O scheduler at the moment for device /dev/sda is CFQ, and I can change it on the fly to NOOP:
Code: Select all$ cat /sys/block/sda/queue/scheduler
noop deadline [cfq]
$ echo noop > /sys/block/sda/queue/scheduler
$ cat /sys/block/sda/queue/scheduler
[noop] deadline cfq
[CODE]..
View 1 Replies
View Related
May 25, 2010
I've installed the latest testing version, which has 2.6.32 kernel perfect for me. I was very amazed when check system monitor and saw it runs with 90MB RAM, meanwhile my ubuntu desktop takes only 400, and the pocket version of ubuntu on vmware has 180MB RAM.
The questions is: Debian runs on vmware 7. Could the amount of RAM change when switching to a normal environment? Or I have to test and see what is happening..What problems could occur when using a testing version?
View 8 Replies
View Related
May 19, 2010
I have installed fc12 on my core2due machine, and I have installed the vmware server on it, its rpm is installed successfully with out any error, after that a message is displayed
The installation of VMware Server 2.0.2 for Linux completed successfully. You can decide to remove this software from your system at any time by invoking the following command: "rpm -e VMware-server".
Before running VMware Server for the first time, you need to configure it for your running kernel by invoking the following command: "/usr/bin/vmware-config.pl".
I tried this command and find the this message
[Akram@localhost Downloads]$ su -c "/usr/bin/vmware-config.pl" Password: Making sure services for VMware Server are stopped.
None of the pre-built vmmon modules for VMware Server is suitable for your running kernel. Do you want this program to try to build the vmmon module for your system (you need to have a C compiler installed on your system)? [yes] yes
Using compiler "/usr/bin/gcc". Use environment variable CC to override.
Your kernel was built with "gcc" version "4.4.2", while you are trying to use "/usr/bin/gcc" version "4.4.3". This configuration is not recommended and VMware Server may crash if you'll continue. Please try to use exactly same compiler as one used for building your kernel. Do you want to go with compiler
"/usr/bin/gcc" version "4.4.3" anyway? [no] yes
What is the location of the directory of C header files that match your running kernel?[/usr/src/linux/include]
Now it asks me in last lines that "What is the location of Directory of C header files that match your running kernal?"
View 1 Replies
View Related
Jan 28, 2011
I am trying to configure the BMC on my server so I can remotely power/boot/check on the system via IPMI.The server is on a switch with an IP address to the outside on eth0.It is my understanding that the BMC gets assigned a non-routeable IP (192.168.x.x, etc), but it runs off the same NIC, eth0. Is that correct?How is the switch port configured to have two IPs on the same NIC/cable? Or do I need to have a second NIC configured for the non-routeable IP?
View 1 Replies
View Related
Aug 5, 2010
I installed OEL4 on both of my Laptops using VMware with Windows 7 as HOST.
I want to configure RMAN. So I need individual IP addresses.
Now how can I ping these both Linux (OELs) from VMwares.?
How to configure the network b/w these two? I have a Ethernet cable. (No router)
In simple:
How to ping two Guest OSs (which are installed on two diff Laptops) which are in VMware with windows 7 as Host.?
View 3 Replies
View Related
Oct 12, 2010
I installed RHEL 6 Beta 2 on ESX box and found that network is to be manually started through ifup command.
View 6 Replies
View Related
Dec 6, 2009
MY OS IS (Widnows XP ) I'm Using VMware Workstation 7 to run My BT4-Beta (backtrack 4)
in my OS Windows XP I have Internet I'm in big network our administrator using Cyberoam Client for Corporate to allow people using Internet.. so if any people connect this network they should has id in Cyberoam if they don't has id will can't connect to the internet.. they will redirect automatically to the log in page in Cyberoam.
So ! in VMware Workstation 7 i configure network adapter to Bridged and i see internet icon with green color but dose not browse internet and also i can't ping my computer this is mean network dose not appear to backtrack my computer is in the network when i try to do ping this is what happened.
And this output to try run network!
PHP Code:
And this is my ifconfig
How to do Step by Step to connect the network using VMware WorkStation!
View 3 Replies
View Related
Feb 6, 2010
I am running Ubuntu. My wireless network is picking up everyone elses but mine? How can I reconfigure to my wireless network?
View 10 Replies
View Related
Jan 18, 2010
I just installed SUSE in a VMware to test it out. A problem i've had with VMware before was getting the wireless to work. I was wondering if anyone knows a way to get the wireless to work over the VMware and in SUSE. I know this may not particularly be a SUSE question but all I saw in the VMware forums was one response that said it was not possible.
View 1 Replies
View Related
Jan 24, 2011
I am using vmware player 3.1.3 and mounted in it an .iso of OpenSuse 11.3. Everything works fine, except the internet connection. For example, when I try to go to a website with firefox the page never displays. What do I have to do, so that the internet works?
View 1 Replies
View Related
Apr 9, 2010
I am not able to connect to the internet via Ubuntu guest in Vmware Workstation. Here is the ipconfig:
Here is the ifconfig -a:
I have the vmware os settings to connect through a nat connection and I am able to ping domains however I am unable to open a page in either firefox or chrome.
View 1 Replies
View Related
Oct 30, 2010
I just installed (n this 11.2 system) vmware server (v 2.02), to have access to a few small systems. One of them is a 11.1 guest which I just upgraded to 11.3, successfully (almost).
I have a problem, though: from the host I can not ping/ssh the guest.
Guest to host works fine (including names).
Code:
The firewall is down on both sides. I don't see anything with iptraf in the guest. The IP addres of the guest is correct, unless I'm too tired to see.
Why?
Code:
View 9 Replies
View Related
Jan 23, 2011
finding / mapping network shares on Win 7 guest in vmware. I am running 10.10 64 bit ubuntu and installed vmware workstation 7 (64 bit version). I created and installed win 7 (ultimate) vm. everything is good so far. The issue is I have a second desktop with ubuntu and I have shared 4 drives on that desktop. I want those shared available to the win 7 guest. And even after enabling the shared folders I do not see them.
Note: I have a shared folder on the same machine where I have vmware installed and win7 has assess to that drive.. its just that the shares on network are not available. Note2: i had virtualbox installed and it worked fine.
View 4 Replies
View Related
Mar 17, 2011
Is it possible to install Snow Leopard 10.6.6 VMware AMD edition (which I downloaded) on VMware linux? It is under Windows 7 so I just need to know if everything of VMware linux (like Hardware Virtualization) is the same under linux as for Windows.
View 1 Replies
View Related
Jun 6, 2011
I want to install debian on vmware workstation 7.1.4 but there's a problem! when I try to install vmware tools or open-vm, it can't complete compile modules of vmware. It is a big problem... It seem problem of kernel version after 2.6.37... But I can't find solution. logs.... Before you can compile modules, you need to have the following installed...
[Code].....
View 2 Replies
View Related
Jul 17, 2011
I have installed the latest version of Ubuntu Linux (11.04) into latest VMware workstation (7.1.4 build-385536). I have tried to install the VMware tools ISO that came with VMware workstation but It didn't work and the installation seemed real sloppy anyways.
I installed the open VMware tools from synaptic within the guest linux and restarted, everything seemed to have been installed just fine but VMware Workstation doesn't detect it. I'm not sure if the tools are outdated, silent errors happened, or if any manual post installation steps need to be taken.
getting any form of VMware tools to run in Linux and detected by VMware Workstation.
View 3 Replies
View Related
Jul 27, 2011
I completed the installation of VMWare Server 2.0.2 onto a CentOS 5.4 64-bit distribution. There is a VMware virtual machine file on the server in question, and I want to activate it through the application console.
I did not see anything readily apparent that would facilitate the importing of the virtual machine file. Does anyone have a procedure that can accomplish this task?
View 5 Replies
View Related
Mar 28, 2009
I am running an up to date Debian Lenny system with vmware 1.08 server installed.
When I run vmware, it appears to start normally. However, when I try to open a previously created image (from a different machine), everything is fine until I hit browse, which causes a screen to pop up that syas "The folder contents could not be displayed VFS error: Invlalid paramteres." and the following shows up on the command line:
Code:
View 1 Replies
View Related
Feb 28, 2011
Installed CentOS 5.5 on VMware ESXi server running vsphere 4.1. Installed fine and picked the E1000 network adapter. But can't get the adapter to become active and pick up an IP address. Has anyone done this before? I can't get it to work. When i was testing CentOS out i used VirtualBox and worked fine using bridged networking but just can't seem to get this network card working.I've put some pictures of the config i've got.http:[url]....
View 2 Replies
View Related
May 25, 2010
Cannot activate network device eth0!"device eth0 does not seem to be present, delaying initialization".i cannot find my network card while i set up network configuration Now I use dual boot window 7 and fedora 9,I cannot find my network card in select network adapter while network configuration ,i have a network card Atheros AR8132 PCI-E fast Ethernet controller NDIS(620)and for wired in Accer laptop .
View 1 Replies
View Related
Mar 3, 2011
I was playing with my debian server when something went totally wrong while i was editing something on my network interface,i removed those crap that i wrote and left the network interface configuration as it was
Like for example after re-editing my network interface,it was like :
As i did a network restart, i get this error saying :
There is already a pid file /var/run/dhclient.eth0.pid with pid 2802 killed old client process, removed PID file.
What is this error and how can i fix it,because every time im re booting my server i lost my network config.
View 1 Replies
View Related
Mar 27, 2010
I have a Canon MX860 network printer but I cannot get it to connect with my openSUSE 11.2 computer
View 9 Replies
View Related
