I just installed openSUSE 11.2 KDE via LiveCD on my desktop computer and have been loving it. The problem is that it will randomly freeze and requires a restart. I've tried booting up in safe-mode, but it still does it. Also, when it does, the screen flickers and flashes in and out before it freezes. And before anyone asks, yes, I have my NVIDIA drivers.
View 9 RepliesIm running opensuse 11.2 on Linux 2.6.31.5-0.1 64Bit, KDE 4.3.1 with 4GB RAM, Intel duo core processor with Intel graphics card. I initially had opensuse 11.1, which i removed and installed 11.2. Initially everything.Then came the problem, the system starts up fine but then after a few hours freezes, monitor powers off and it wont accept commands from the keyboard or mouse. Meanwhile the lights (caps lock, numeric and scroll) on the keyboard blink. The power light is still on and i can hear the hard disk turning.
I have to forcefully turn the power off and restart but can freeze again after random periods.I do lengthy and demanding computations and its common for the PC to run for weeks without turning it off.
I have a Ubuntu 10.04 fresh installation on my HP laptop. Installation successful and boot OK. But the desktop randomly freeze. During freeze(about 15s each time), all programs are not responsive. Sometimes I can switch program by click, but program seems locked. How can I know which module cause the freeze?
View 4 Replies View RelatedI'm running Jessie 64bit, and after installing the latest image and fully updating it, I get screen freezes using gnome, most oftenly when i press the start button to access gnome app grid. System becomes unusable and I have to hard reset. Just in case, I installed linux firmware from nonfree repos, but the issue persists. I don't use any exotic hardware:
Code: Select all00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller (rev 06)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller (rev 06)
00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06)
00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)
00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 04)
[Code] ....
I'd say it's related to graphics, but I don't know how to get around it...
I have been having a small problem since I upgraded from Jaunty to Karmic, whenever I shutdown or restart, root password is required due to multiple users being logged-in.
I have run ck-list-sessions, however I can not trace where (or what) session 5 is.
Code:
Since I have MythTV installed and there was a similar bug, I tried the following solution without any success: [url].
I am having occasional internet connection problems on startup. 1 out of 5 times that I start my computer, I will have absolutely no internet connectivity, can't ping my router, obtain ip. nothing. Tried re-establishing connection with no luck. Status light on my router displays a slow flash. I restart, problem solved. Not so much a major problem, but irritating at times
View 1 Replies View Related[URL]
Basically, when I do a reboot or shutdown and then the system tries to start I get a blank screen thus I have to hit the reset button and then I'm showed a grub menu (not sure why I have it set to autoboot) and then I can boot properly.
My KDE sessions freeze randomly- while only doing some basic work, browsing etc. Keyboard and mouse do not respond and I can just do the hard reset. how do I find what might be wrong? Where in the logs do I look??
View 2 Replies View RelatedAny time i try to start my computer from a cold state (off for 1+ hours), the first time i start it, it hangs and requires a SYSREQ reboot to restart it. When it hangs, all the window decorations disappear and the background vanishes. The main menu opens, but click on things does nothing. clicking shutdown only brings up the normal shutdown window with the text replaced with squares.
Thought it was my hdd (i/o errors and for some reason the HDD remounts r/o at this point), but e2fsck shows no issue.
Thought it may be an IRQ conflict, so i enabled MSI on all my PCI Devices.
Thought it was the 'green' aspect of my WD Drive, so i set the spindown time to 5 hours using hdparm config file. startup messages printed to screen confirm it is working.
Also, due to the numerous hard resets, the system is detecting a 'previous i/o error to the superblock'. Should recovering the SB from a backup be beneficial?
Today im experiencing many freezing issues with my office desktop running lucid amd64.
Every application i run, seem to randomly freeze and then crash.. i dont understand wy, yesterday the pc worked as usual.
I was using kernel .38, i tryed to switch back to .32, but nothing change;
This is my apt history (some packages has been updated yesterday):
Code:
I dont see any packages that can cause this error. The freezes seem to be related to the hard disk: if i try to copy/download large files, the freezes happen instantly; but i've tryed Smart test from disk utility, and GSmart from a live cd: the hard disk seem to be ok. Even memtest doesnt report any error.
I recently built a computer for a friend that is only going to be used to run a network share.
The problem I am running into is that whenever the computer restarts the share, while visible, cannot be accessed by the two Windows 7 laptops in the house.
If I run 'sudo umount /media/storage' followed by 'sudo mount /dev/sda1 /media/storage' the once visible but inaccessible share is now accessible.
I do not understand why this would be. I have added the line 'usershare owner only = false' to my smb.conf file.
I thought I should share a solution to a freeze issue I was having. Fedora 11 was running well but then started to freeze randomly when it was sitting unused. This could happen multiple times per day. I would have to power off to get it to reboot. Firefox was always open at the time of freezes and I had recently loaded several programs to try and run wmv files....Xine, GStreamer. So, I unloaded the programs. I also went into Firefox options and removed Xine as the default program for opening different types of files. The freeze issue is now cured. I have no idea how this caused the freeze and I never did get wmvs to run but at least the freeze issue seems gone.
View 1 Replies View RelatedI just recently notice that my Fedora 13 is randomly stop at boot. This is a fresh install less than a week and with all the updated kernel and software as of today. I could not get much information from /var/log/messages (only about 3 lines at the time it froze).
It froze straight after it finishes the boot sequence. I can see a mouse cursor but that's about it. The last init sequence I could see before going to X was "atd" (if that helps at all)
This install is on a single Seagate 1.5TB drive without any other drives attached to the system (I rule out if that's problem with the other hard drives)
on Gigabyte P35DS3 mobo on ICH9 port
the mobo has AHCI mode for the hard drive
I got some bad sector on the hard drive (40 sectors)
For some reason, it kept stopping when I cold boot. Once it stop and I press the reset button it normally works.
I found another forum mentioning it can be issue with the video driver. So I here's further information of my system code...
I use Gnome mplayer but it freeze random when playing videos and just show a black screen without sound and if i simply press backward or forward button to send it 10 sec forward or backward it will continue to play video until it freeze again.sometimes it takes seconds to freeze and sometimes half an hour or more.
View 3 Replies View RelatedUnfortunately, I've encountered a disaster the likes of which I've never seen before:Yesterday, in slackware 13.1, while using firefox, the window would no longer move or resize, and I could no longer click on things in that window.While this happens, the icons in xfce4 panel no longer acknowledge that the mouse is rolling over them, so I can't launch terminal from a panel, etc.; however I am still able to right click on desktop and open terminal and other apps that way.Since it was high time to upgrade to 13.37, and since I was experiencing weirdness, I decided to do a clean install: I actually repartitioned my drive, and reformatted the partitions (all xfs, and after backing up my data, of course)...
I don't know if that's significant, or not. there seems to be some lines in /var/log/Xorg.0.log about my logitech mouse.way too complicated to write by hand.I will log out and back on... sometimes that frees up other windows. Then I'll add the Xorg.0.log.
I installed Slackware 13 (full install) a few days ago and every thing is working well except KDE freezes (I'd say randomly but lately it seems as if it happens after I use a KDE program or component.) and nothing works except the mouse cursor, I have to use the power on/off to reset the computer. After a reboot and fsck checks the partition that was unmounted improperly I log in delete a few bad files (.serverauth.XXXX, socket-speeedy and tmp-speedy) I'm usually able to restart KDE using startx. Googling around I think it may be my on board Intel video, dmesg id's it as the Intel 830M Chipset. BTW, this box ran Mandrake 10.1 for the last 6-7 years without problem, for what's worth.
View 14 Replies View RelatedI've recently installed 10.04 LTS on a desktop PC so I can use it as a Zabbix monitoring machine.
I fresh installed and all seemed to be well but after a few restarts the system suddenly refused to boot anymore. The BIOS splash screen comes up and then a cursor blinks on the screen for a couple of seconds and then... nothing. The keyboard and monitor both go unresponsive and nothing happens.
I can hear the HD spin up and it isn't making any weird noises. Also, booting from the CD works and I can see and work with the HD so I'm not convinced that this is the problem.
In fact, I actually did a fresh reinstallation of 10.4 onto the machine and started from scratch. Again it ran fine for a few hours while I was setting Zabbix up. After a couple of restarts, again the freeze on boot.
I ran a HD scan and everything seems fine. I've also switched the HD over to the second IDE connection in the box just in case...
Does anyone else have this problem? Is it a bug? Any ideas on how to workaround it? (Short of going back to a previous Ubuntu version)
I was opening up a ODG doc and then my pc froze up. I powered it down, but now its telling me upon trying to open up the document again that someone else is accessing it so its locked.
View 1 Replies View RelatedI am trying to install the beta of kdepim for testing. I am using the repo here
Index of /repositories/KDE:/Unstable:/SC:/kdepim45/KDE_Distro_Factory_openSUSE_11.3
I used the one click install for kdepim4 4.4.93 and it pulled in the kde distro factory 4.5.1 repo as well automatically, but when I try to install any of the beta stuff, it complains of requiring kdebase4-runtime >= 4.5.2 which doesn't exist anywhere. So do I have to test the entire kde unstable or can I just test kdepim (what i really want to do) as the post on news.kde.org indicated.
I am trying to install Antivir 3.1 on Linux 11.3 64-bit. However it is asking for a libdazuko.so. How do I find this?
View 9 Replies View Relatedi've been trying to "./configure" the bandwitdhd package. When i do it i get :
configure: error: Bandwidthd requires but cannot find libpcap
I have installed the libpcap and libpcap-devel:
linux-1a6o:/home/alex/bandwidthd-2.0.1 # locate libpcap
/alex/Win32/Prj/libpcap.dsp
/alex/Win32/Prj/libpcap.dsw
/usr/lib/libpcap.a
[Code]....
I've been running 11.3 on a net book for several weeks and have not had this happen on that computer. On a different computer, which was upgraded from 11.2 to 11.3, now requires a root password to shut down the computer.
View 1 Replies View Related'm running openSUSE 11.2 with KDE 4.4.2.
Since i installed KDE 4.* Whenever I go to shutdown, I get the shutdown dialogue, I hit shutdown, it logs me off, shows some text on shutdown screen, and then opens up the GUI again, bringing up a small window, where It asks for the root password, in order to shutdown. If i don't give it the root password, it goes to the login screen.
I cannot, any way, command line, GUI, or anything, shutdown without providing a root password.
If I use the command shutdown now, as root, it logs me off and goes through an endless cycle of logging off, and then asking for root to shut down, and not shutting down (All on the CLI), and everytime i give it the password, it cancels shutdown and goes back to the prompt. I eventually have to pull the battery to kill it in that case..
I have tried chmoding the shutdown scripts to make it work, it doesn't.
new Install of 11.2 every time i boot i have to config network devices via Yast Control Center. I now have 8 eth configs for my one local net adapter. Why does the MAC address change each time? I cant use my routers built in MAC filter and MAC control functions if this keeps changing. So each time i boot i need to also go into my router and build a new MAC address profile based on the new MAC address before i get Internet access. Security to the point of no access...I hope this is just a bug in the system. I thought MAC addresses were firmware/device specific? What I need is one eth config that works each boot. And I need one MAC address that does not change between boots.
View 4 Replies View RelatedI have a embedded computer running 10.3 (stuck with that version) that has USB device issues. In reality, it has two USB devices attached, both FTDI FT232 USB to Serial Uart driven hardware. Both usually are at /dev/ttyUSB0 and 1 when everything goes right. The latest FTDI driver is already in the kernel. Randomly however, when it boots one or both will be missing in dev. If we only leave one physically attached before booting, sometimes it comes up ok, the other times there's no listing in /dev/ or lsusb. But when we do run lsusb once and watch the system log, suddenly the device is found and 'attached'. Then it works fine.
I've repeated this with another test USB device (and old cell phone that gets installed as a ceullar modem) and the same thing can happen. It will randomlyy be missing from lsusb listing till lsusb is run once. IE, run it once, no listing, run it again, then it shows up and the system log saya it was just attached. If we leave both, sometimes one device (Call this one A) is ready to go, but device B is missing. If we unplug B, A dissapears from /dev/ and the system log says A was unpluged. The when we reattach B, both show up in /dev/ and the system log reports two USB devices were attached. running lsusb doesn't fix one or both missing when they are both physically attached.
I want to run system tap with user profiling which requires utrace and uprobes support from the kernel. Are there any SUSE kernels which support this either for SLES or open suse?
View 2 Replies View RelatedI'm experiencing random lockups. There are 2 types.1st time this happened when I enabled Kwin compositing effects. The screen turned black and it froze, the mouse pointer froze. Nothing would move. 5 Minutes later I just hard reset the Laptop. I was afraid something could be corrupted as it was shutdown in a bad way. On boot up Kwin's compositing effects were in place.Randomly working on the laptop, everything will freeze except the mouse pointer. This happens like once in a while though.I have a feeling this has something to do with my Dell Studio 1555 Intel GM4500 MHD graphics.
View 5 Replies View RelatedI'm not sure if this started with the 2.6.34.4 or 2.6.34.7 update, but one of those.At random intervals the USB subsystem disconnects. When that happens the monitor screen goes black (no input signal) and then returns 1 - 2 seconds later. This was happening every once every 1 - 2 days; today the count is 10 times. It's gotten really annoying.There is a topic about USB mouse and keyboard becoming unavailable due to recent kernel updates. That is not the issue here; I have tried disabling USB auto-suspend with no observable change in behavior.Or could it be that I have a defective mouse?
View 3 Replies View RelatedMy machine seems to randomly hang, and I am not sure how to work out what is causing it. Are there some logs I can examine that may help me first that I can look at?
My mouse stops, keyboard stops and cpu monitor on screen doesn't move so no idea if its some kind of X thing, os thing, or hardware.
when i type ssh@othernode the terminal freezes, without saying have alot of fun or anything, it just freezes. PS:firewalls on both machines are down, public and private keys are successfully and correctly exchanged.
View 8 Replies View Related