Fedora X86/64bit :: F13 Randomly Freeze At Boot / Resolve This?
Aug 25, 2010
I just recently notice that my Fedora 13 is randomly stop at boot. This is a fresh install less than a week and with all the updated kernel and software as of today. I could not get much information from /var/log/messages (only about 3 lines at the time it froze).
It froze straight after it finishes the boot sequence. I can see a mouse cursor but that's about it. The last init sequence I could see before going to X was "atd" (if that helps at all)
This install is on a single Seagate 1.5TB drive without any other drives attached to the system (I rule out if that's problem with the other hard drives)
on Gigabyte P35DS3 mobo on ICH9 port
the mobo has AHCI mode for the hard drive
I got some bad sector on the hard drive (40 sectors)
For some reason, it kept stopping when I cold boot. Once it stop and I press the reset button it normally works.
I found another forum mentioning it can be issue with the video driver. So I here's further information of my system code...
View 7 Replies
ADVERTISEMENT
Jun 4, 2010
I have a Ubuntu 10.04 fresh installation on my HP laptop. Installation successful and boot OK. But the desktop randomly freeze. During freeze(about 15s each time), all programs are not responsive. Sometimes I can switch program by click, but program seems locked. How can I know which module cause the freeze?
View 4 Replies
View Related
May 27, 2010
I thought I should share a solution to a freeze issue I was having. Fedora 11 was running well but then started to freeze randomly when it was sitting unused. This could happen multiple times per day. I would have to power off to get it to reboot. Firefox was always open at the time of freezes and I had recently loaded several programs to try and run wmv files....Xine, GStreamer. So, I unloaded the programs. I also went into Firefox options and removed Xine as the default program for opening different types of files. The freeze issue is now cured. I have no idea how this caused the freeze and I never did get wmvs to run but at least the freeze issue seems gone.
View 1 Replies
View Related
Sep 17, 2010
I'm new to Fedora/Linux trying it out because I'm becoming hacked off with Windows taking so much time to do anything. The problem I have is that every now and again the computer slows down so drastically that the mouse movements are jerky, response to clicks/key inputs take about 2-3 mins to get a response and the only solution is to press and hold the power button. I'm running a Packard Bell Dot M/U. It has mobile celeron 1.3GHz 64 bit, 3GB ram. Intel wi-fi, atheros LAN (i think), HDMI output. I believe that it is v similar to an Acer Aspire 1410 (but not 100% same).
View 3 Replies
View Related
Mar 8, 2009
The only error message I am able to retrieve is in the GDM 0.log as follows:
AUDIT: Sat Mar 7 17:58:27 2009: 5034 X: client 9 rejected from local host ( uid=500 gid=500 pid=5066 )
View 6 Replies
View Related
May 13, 2011
My F-14 x64 bootup stalls with this message: "K10 temp ... unreliable CPU thermal sensor: monitoring disabled". I'm unable to find an explanation/basis for this message. I can boot from CD#1 and chroot onto the disk - near as I can tell, all the data is there. Might this be the result of a corrupt boot up sequence file and, if so, which one(s)?
View 3 Replies
View Related
Jul 17, 2010
I m newbie in Linux. i am using fedora 13, kernel release: Linux 2.6.33.6-147.fc13.x86_64 and my graphics card is nvidia g-force 8400 GS. nvidia driver version is 195.36.31.
now my problem is when i run any video file in any media player, my system just freezes...and only way to get rid that is system reset !!! and it get freezed randomly, sometimes system works fine without halting!! i update my kmod-nvidia and kernel but the problem has not been solved!!
View 3 Replies
View Related
Jul 14, 2009
I can get all of the 32 bit packages installed just fine, but when I run ./configure I get the following errors:
[code]...
how to resolve these errors.
View 14 Replies
View Related
Aug 19, 2011
My KDE sessions freeze randomly- while only doing some basic work, browsing etc. Keyboard and mouse do not respond and I can just do the hard reset. how do I find what might be wrong? Where in the logs do I look??
View 2 Replies
View Related
Mar 18, 2010
I just installed openSUSE 11.2 KDE via LiveCD on my desktop computer and have been loving it. The problem is that it will randomly freeze and requires a restart. I've tried booting up in safe-mode, but it still does it. Also, when it does, the screen flickers and flashes in and out before it freezes. And before anyone asks, yes, I have my NVIDIA drivers.
View 9 Replies
View Related
May 3, 2011
Today im experiencing many freezing issues with my office desktop running lucid amd64.
Every application i run, seem to randomly freeze and then crash.. i dont understand wy, yesterday the pc worked as usual.
I was using kernel .38, i tryed to switch back to .32, but nothing change;
This is my apt history (some packages has been updated yesterday):
Code:
I dont see any packages that can cause this error. The freezes seem to be related to the hard disk: if i try to copy/download large files, the freezes happen instantly; but i've tryed Smart test from disk utility, and GSmart from a live cd: the hard disk seem to be ok. Even memtest doesnt report any error.
View 9 Replies
View Related
Mar 19, 2010
I use Gnome mplayer but it freeze random when playing videos and just show a black screen without sound and if i simply press backward or forward button to send it 10 sec forward or backward it will continue to play video until it freeze again.sometimes it takes seconds to freeze and sometimes half an hour or more.
View 3 Replies
View Related
Jul 8, 2010
It seems like it is mostly happening when I am running fire fox. The screen goes black (but in in sleep mode) and I have to push the power button. After I push power button the screen goes marron-ish with an ubuntu logo with a 4 animated dots and then turns off.
when I start the PC up again I get an error about the Power Manager not ending correctly. It has happened 3 times so far today alone.
View 3 Replies
View Related
Jul 20, 2011
Unfortunately, I've encountered a disaster the likes of which I've never seen before:Yesterday, in slackware 13.1, while using firefox, the window would no longer move or resize, and I could no longer click on things in that window.While this happens, the icons in xfce4 panel no longer acknowledge that the mouse is rolling over them, so I can't launch terminal from a panel, etc.; however I am still able to right click on desktop and open terminal and other apps that way.Since it was high time to upgrade to 13.37, and since I was experiencing weirdness, I decided to do a clean install: I actually repartitioned my drive, and reformatted the partitions (all xfs, and after backing up my data, of course)...
I don't know if that's significant, or not. there seems to be some lines in /var/log/Xorg.0.log about my logitech mouse.way too complicated to write by hand.I will log out and back on... sometimes that frees up other windows. Then I'll add the Xorg.0.log.
View 5 Replies
View Related
Jan 12, 2010
I'm very new to Linux and have installed debian Lenny.
but I have met some problems. The biggerst one is that I cant start debian.
To be more exactly, debian freeze after i come to the loggin scean, I cant move the mouse and i cant wright.
You may say that this is hardwear error but its not, cus i can run grubs singel-user-mode and do whatever i want in the shell.
so my question is, how do i fix this from shell. I think maby I shld change something in xorg.conf but not sure what, and how.
View 9 Replies
View Related
Sep 19, 2010
So when i initially boot (both using wubi and a usb stick.) it will start to go and then do the alternative boot option with a 5 second count down. Then if I'm lucky it will get passed that then either a black screen with just a flashing _ on it and it will freeze there. Or it will go to the ubuntu opening with the little dots for initial boot and it freezes there. (the dots don't move more then two and then it really freezes.) My specs are
i5 750
Nvidia Geforce GTS 250
1.5 TB harddrive
ASUS P7P55-M LGA 1156 Intel P55 Micro ATX Intel Motherboard
Windows XP home edition 2006 with SP3.
View 4 Replies
View Related
Feb 23, 2011
I just bought a Intel D525MW ITX board, a PicoPSU and a stick of 2GB ram.
I burned the new stable debian netinst to a disk and booted it up from a usb cdburner. At this point I had a usb keyboard and a usb kingston pen drive (temporary / ) connected. The computer would freeze whenever I chose a menu item. I rebooted a couple of times, same thing. I disconnected the usb pen and were finally able to start a graphical install. I quickly reconnected the pen and the install went fine as far as I could see.
Now. When I boot from the pen it just freezes showing "GRUB lading. Welcome to GRUB!" and a blinking underscore.
I were able to boot the usb pen on my Alienware laptop just fine - although it wanted a reboot after it ran a fsck.
View 2 Replies
View Related
Apr 26, 2011
I have a problem with getting my Linux distribution (Debian amd64-bit) to install. Everything works the way it should - from booting a live CD/DVD (any distro) to running the text-based or gui installation right after bootup. Up until the Linux installation gets to the step for detecting my SATA hard disk drive(s), but before (or at the same time as) initiating the partitioning step, it'll freeze/hang my screen and my CD/DVD drives instantaneously - and the only fix is a forced shutdown and/or hard reboot.
I don't know what causes this, but I tried googling online and all that I really found out was that it might be an issue with running 32-bit vs 64-bit installations - but this is not the case; from running Gparted on Knoppix 32-bit or the partitioning step during a Debian 64-bit installation. Also, I read a random post online related to running kernel commands / parameters alongside the installation (e.g. acpi=off or something similar) stating that it might help?
Anyone got any ideas or solutions? I'm a real newbie when it comes to Linux (though, I'm quite knowledgeable when it comes to computers and technology, and Windows) - else I wouldn't be posting in this forum sub-section, hehe. I can't quite get my head around this one - despite trying my best to find a solution online beforehand.
View 2 Replies
View Related
Mar 3, 2009
We (2 persons) are experiencing a total freeze on first boot after installing fc10 from the 6 CD distro set, and yes, we used the same discs but ran the validate check on each. One machine is a rather ancient Acer G7500G which had previously been running FC3 happily; the other is a very new Dell Notebook (now running FC9 happily). The freeze occurs after the progress bar turns all white. Pressing escape shows that the volume group(s) have been found and are now "active", but that's all she wrote.
The systems can be mounted in repair mode and I notice that there is no "functions" file in /etc/rc.d/init.d but this may be normal for FC10.
The Del owner have officially given up, but before I throw FC10 out and go to 9 also, I though the question was worth asking: has anyone installed FC10 from the CD distro as opposed to the DVD distro successfully?
View 9 Replies
View Related
Sep 18, 2010
I have a very strange problem with Fedora 13 on my home PC. When booting it just hangs at random points in the boot process. When it happend the first time, I thought the PC probably is completed frozen, but then I discovered that hitting the return button got the boot process going on again, but just step by step. That means on every boot I have to keep hitting the return button until gnome starts up, that's very annoying. So for any reason the boot process seems to switch to interactive mode somehow...
I already removed the kernel boot options rhgb and quiet to see, where exactly this happens in the boot process. But as I said, it seems to be completely random. Sometimes it's when "Starting udev", sometimes, when setting up eth card, when starting atd, and so on. It's different every time.
By the way, a similar thing happens when shutting down. It can take up to half an hour until the PC really shuts down. But it's usually going faster if I just keep hitting return after issueing the shutdown command (which actually looks a bit dull). But the PC finally shuts down at some point. That's not the case when booting up. I thought, maybe there's some kind of timeout problem. But even waiting for two hours, the PC does not startup without keeping hammering the return button
View 8 Replies
View Related
Jun 21, 2011
I'm still trying to learn the ropes on linux as a whole and I've run into sort of a huge dilema. I wanted to connect my laptop to my TV via VGA. However, it would not work because I didn't have the proprietary graphics driver for my graphics card (Nvidia Quadro NVS 3100M). I searched the internet and found the guide below because the guide provided here did not specify Quadro family graphics cards[URL]I followed the "easy method" to the T. Now I cannot boot into Fedora 15 at all (I'm stuck on bloody Windows 7 again ). It simply freezes at the boot animation (the "F" in the bubble). What can I do to fix this
View 10 Replies
View Related
Jul 14, 2009
I just updated my kernel to kernel-2.6.29.5-191.fc11.x86_64 on my x64 system, after I reboot my machine, the Fedora loading bar comes up and finishes but then no gui comes up. I attempt to issue commands at the hanging prompt that comes up but nothing happens. I can boot into my older kernel just fine but not the updated one.
What can I do?
View 3 Replies
View Related
May 31, 2010
I've just updated my desktop to F13 using preupgrade but now grub won't boot it. The upgrade seemed to go OK, and none of the disk partitions should have changed as far as I'm aware, but now I get an error
VFS: Cannot open root device "UUID=xxx" or unknown block(0,0).
View 1 Replies
View Related
Jan 16, 2009
I'm new to these forums. I'm coming from using Ubuntu for a couple of years and now I'm trying to switch to Fedora.
I installed F10 yesterday and all went well, more or less. The system used to freeze randomly but after updating, everything seemed to work fine (I haven't tried audio yet, though).
I have an X1250 integrated graphics system that's working fine in Ubuntu. After playing around with F10 for a while I decided to download and install the latest ATI drivers from AMD's site. The installation posed no problems, but when I reboot the system it will come to a black screen at some point and freeze there.
I searched the web a little and came to this: http://www.fedorafaq.org/#radeon, but I'm not sure if that's current or old news. If it's current and those ATI drivers can't be installed, I'd appreciate some help about removing them.
View 9 Replies
View Related
Aug 23, 2009
I have recently updated my Fedora 11 installation which replaced my older 167 kernel with the newer 217 kernel. However, the 217 kernel will not boot completely. It will show the splash loading screen, and then will switch to a rapidly blinking cursor. This cursor blinks for about 5 seconds and then disappears. I can access terminals using ALT+F2, etc. I can log in to these terminals, but init commands do not complete (something about a binary handler). I'm not sure if something is conflicting with an update to X or what is wrong. The most recent kernel that I managed to get to work was Kernel 167, however I cannot find this kernel for download.
Sys info:
AMD Athlon 64 X2 4800+
3GB RAM
nVidia GeForce 8600GT with proprietary drivers
320GB Hard Disk with windows and linux partitions
Fedora 11 32-bit i586
View 2 Replies
View Related
Nov 19, 2009
Having a problem, have built some VM's and importet some from JumpBox, but they will not boot from the HD. I am using files for the HDs mixture of ".img" and ".vmdk". I can boot and build from the network and CD/ISO, but after the installation completes it reboots attempts to boot from the HD and nothing happends. No error message is displayed.
Has any one come across this ?
View 1 Replies
View Related
Aug 6, 2010
I am a linux newbie.
I had dual boot fedora 9 with windows XP before. Now I decided to change to fedora 11. I choose the option Replace existing linux while installing the fedora 11. My windows used to be in C drive while my linus in D drive. So I thought it would replace the D drive and remain dual boot.
However, after I reboot the computer, I realize that it can only boot linux. My windows partition appear as a File System in linux. code...
View 1 Replies
View Related
Dec 18, 2010
I have a windows and a linux box running DHCP respectively. The problem is whenever my client system boots up, it fetches the dynamic IP from the windows box. What should I do in order for my Linux box to provide dynamic IP's to clients? Both servers are in a single network. connected via switch.
View 1 Replies
View Related
Oct 26, 2010
FC13
When rebooting and in Boot Selection Menu , the Arrow keys won't go down through kernel selections. They just won't move.
Is this a Linux or CMOS problem ?
View 1 Replies
View Related
Nov 19, 2009
I added the rpmfusion repos so that I could install the nvidia drivers and downloaded whatever updates appeared. Initially after rebooting, I kept getting "No root device found" which I've managed to solve but now it keeps locking up after "Starting atd". That actually manages to load and then it locks so I'm guessing that it's "S99livesys" that is causing the problem.From googling, this appear to be a problem with certain kernels and can be resolved by either using an older kernel image or turning the process off in the command line. My problem is that this was a fresh install so there's only one kernel image so it's impossible for me to use a different one. For the same reason, I can't get into the command line.
Is there anyway to get around this without re-installing?I don't want to have the same issue if I re-install?Can I download the kernel images and just place them in /boot?
View 2 Replies
View Related
