[URL]
Basically, when I do a reboot or shutdown and then the system tries to start I get a blank screen thus I have to hit the reset button and then I'm showed a grub menu (not sure why I have it set to autoboot) and then I can boot properly.
I have been having a small problem since I upgraded from Jaunty to Karmic, whenever I shutdown or restart, root password is required due to multiple users being logged-in.
I have run ck-list-sessions, however I can not trace where (or what) session 5 is.
Code:
Since I have MythTV installed and there was a similar bug, I tried the following solution without any success: [url].
I'm running Jessie 64bit, and after installing the latest image and fully updating it, I get screen freezes using gnome, most oftenly when i press the start button to access gnome app grid. System becomes unusable and I have to hard reset. Just in case, I installed linux firmware from nonfree repos, but the issue persists. I don't use any exotic hardware:
Code: Select all00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller (rev 06)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller (rev 06)
00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06)
00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)
00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 04)
[Code] ....
I'd say it's related to graphics, but I don't know how to get around it...
Im running opensuse 11.2 on Linux 2.6.31.5-0.1 64Bit, KDE 4.3.1 with 4GB RAM, Intel duo core processor with Intel graphics card. I initially had opensuse 11.1, which i removed and installed 11.2. Initially everything.Then came the problem, the system starts up fine but then after a few hours freezes, monitor powers off and it wont accept commands from the keyboard or mouse. Meanwhile the lights (caps lock, numeric and scroll) on the keyboard blink. The power light is still on and i can hear the hard disk turning.
I have to forcefully turn the power off and restart but can freeze again after random periods.I do lengthy and demanding computations and its common for the PC to run for weeks without turning it off.
I am having occasional internet connection problems on startup. 1 out of 5 times that I start my computer, I will have absolutely no internet connectivity, can't ping my router, obtain ip. nothing. Tried re-establishing connection with no luck. Status light on my router displays a slow flash. I restart, problem solved. Not so much a major problem, but irritating at times
View 1 Replies View RelatedI just installed openSUSE 11.2 KDE via LiveCD on my desktop computer and have been loving it. The problem is that it will randomly freeze and requires a restart. I've tried booting up in safe-mode, but it still does it. Also, when it does, the screen flickers and flashes in and out before it freezes. And before anyone asks, yes, I have my NVIDIA drivers.
View 9 Replies View RelatedAny time i try to start my computer from a cold state (off for 1+ hours), the first time i start it, it hangs and requires a SYSREQ reboot to restart it. When it hangs, all the window decorations disappear and the background vanishes. The main menu opens, but click on things does nothing. clicking shutdown only brings up the normal shutdown window with the text replaced with squares.
Thought it was my hdd (i/o errors and for some reason the HDD remounts r/o at this point), but e2fsck shows no issue.
Thought it may be an IRQ conflict, so i enabled MSI on all my PCI Devices.
Thought it was the 'green' aspect of my WD Drive, so i set the spindown time to 5 hours using hdparm config file. startup messages printed to screen confirm it is working.
Also, due to the numerous hard resets, the system is detecting a 'previous i/o error to the superblock'. Should recovering the SB from a backup be beneficial?
I recently built a computer for a friend that is only going to be used to run a network share.
The problem I am running into is that whenever the computer restarts the share, while visible, cannot be accessed by the two Windows 7 laptops in the house.
If I run 'sudo umount /media/storage' followed by 'sudo mount /dev/sda1 /media/storage' the once visible but inaccessible share is now accessible.
I do not understand why this would be. I have added the line 'usershare owner only = false' to my smb.conf file.
I am new in Using Ubuntu, I need to set up environmental variables in Ubuntu, I do the following:
Code:
export JAVA_HOME=/path/to/Java
export PATH=$JAVA_HOME:$PATH
it work fine, but every time I restart the system I have to reset it again Is that the right way to it, or I do something wrong
working on KDE, I cannot shutdown, reset, logout or switch users through graphical interface (you know, bit blue button, 'leave' tab and all these buttons).I've googled the problem, and here's what I have found:[URL]Guys on the Arch forum related the problem to the OGG files and phonon-xine - indeed, I cannot play OGG files anymore.I tried to install phonon-vlc, but the package is not in any of my repositories. I tried to remove libqt4-phonon, but it would also remove half of the system, which isn't the best idea. Someone else suggested to install speex, but it's already installed on my Kubuntu.I'm out of ideas, and I'm not really sure how to reinstall xine and phonon without deleting half of the system like this:
Code:
The following packages will be REMOVED:
akregator amarok apport-kde apport-qt apturl-kde ark calibre digikam dolphin dragonplayer
[code]....
In my KUBUNTU 9.04 every time i set my desktop(wallpaper) it is reset to default after restart.
View 1 Replies View RelatedI have a Dell laptop which has braodcom wireless . After I Installed UBUNTU 10.10 my wireless drivers are automatically installed.
THE HAPPEIST PART NO NEED TO DOWNLOAD AGAIN the restricted drivers
I use a dial up broadband so i have to dial usin PPPoe top connect to internet. so when I'm using wireless modem I have to first make sure that the wifi is established and then run PPPoe. i configured the wireless eth1 thru iwconfig with difficulty as it getting the SSID and the key phrase updated to the settings only when i run the command twice.
Ok got connected to the internet and yes my work i dopne i shutdown or restart my system for somereason and here the problem starts , all the configuration done to the iwconfig eth1 is gone again my eth1 is a default one with no SSID. and i thought the problem is da hardware switch ,but NO it was not my eth1 is always ON
I installed Open Suse 11.3 LXDE from the live CD I downloaded. My monitor settings reset to the highest resolution on every shutdown/reboot. Other settings like my wallpaper and removing the lock screen on screensaver also reset.
Is this there anything I can do to get settings/changes I make to stay?
I have a recently new, less than 2 weeks old, Ubuntu 10.04 LTS installl. It is a clean install since the prior install of 10.04 LTS decided it would no longer allow me to login.
My problem is that I cannot shutdown or restart my machine. And I have no idea why it happened.
I have just installed 11.04 on my Acer Z5610 and it won't shutdown or even restart noramally. I have to force shutdown every time. I installed the ati graphics drivers but still no change. What could be wrong?I have reinstalled 4 times, using usb and cd.
View 9 Replies View RelatedI have assembled an Intel D915PDT Administration Intel Desktop motherboard with an Intel 651 Processor which has 3.40 GHz 800 MHz FSB 2MB L2 Cache and 1GB DDR1 400 MHz RAM also GeForce 8400GS 512 Graphics Cards. But this PC have a problem, if once I shut it down I cant restart it again, but the next day it works properly. I tried in various operating systems like Windows XP service pack 2, pack 1, Windows 7 Professional and Ultimate 32bit and I have checked several times the BIOS settings properly but the problem is still the same.
View 1 Replies View RelatedI'm in 9.10, I had KDE 4.3 now with SC 4.4, and it doesn't reboot or shut down from any graphical way I can access. Power management works otherwise, and I can shut down from the command line.
View 6 Replies View RelatedI have just installed ubuntu 10.10 so i am new to linux operating systems.In the top right hand corner where the shutdown button is with the options to restart, mine is not there.Could someone please tell me how to get back this button or another way that I restart so I can access my windows boot?
View 3 Replies View RelatedWhatever I do, I can't get my linux to reboot, shutdown or hibernate.
Here is some new info:
I am using stripped down xfce4 with compiz and emerald.
Here's my .xinitrc
Code:
and my startup script
Code:
1. My login manager is SLIM which I use to autologin.
Code:
2.
Code:
3. Here is what happens when I try to reboot with the .xinitrc file I published above - it freezes on console login screen: [url]
4. Here is what happens if I change the .xinitrc file to this:
Code:
And script file:
Code:
It won't even login: [url]
This is a really weird issue. I'm using 10.04 and on occasion when I boot into Ubuntu the sound doesn't work along with losing the ability to shutdown via the menu. When I click shutdown it just logs out. I need to shut down my PC by using the terminal.
It's strange because the sound and shutdown work as expected most of the time. The issue is seemingly random.
I installed 10.04 on my old Dell Inspiron 600m laptop. After using it for about an hour, I was suddenly had no option to shutdown or restart the system when logged in on the main and only account. The 'Shut Down' applet on my bar was greyed out and the shutdown option was missing from the system menu.
I removed the 'Shut Down" applet and was unable to re-add it afterwards (wasn't a selection when adding to panel). If I log off, selecting shutdown or restart from the login screen does nothing.
'Sudo shutdown now' will shut it down, though it won't power the system off; it just hangs on an all-white screen.
I saw other posts suggesting Open Office Quickstart was the culprit, though I am not running this.
sometime when i try to shutdown or restart my laptop with Ubuntu 10.04 it freezes and this is the last message : init: gdm main process (991) killed by KILL signalith status 255nal executable binary formats[ OK ] *Stopping Likewise DCE/RPC Endpoint Mapper: dcerpcd i could not find shutdown log file if is needed where is it?
View 3 Replies View RelatedOn two of my machines that have Ubuntu 10.10 on them, I cannot shut down, restart or log out by pressing the "power button" on Gnome panel. I can not even do "Alt + Ctl + Backspace" either. However, I can shutdown or restart by: Quote: sudo shutdown -h now sudo shutdown -r now
View 4 Replies View RelatedI'm running Ubuntu 11.04 on an IBM Thinkpad T60, when I try to Logoff, Restart, or Shutdown the system just goes to a black screen and I'm forced to do a hard reset to restart the system. I did a reinstall and things seemed to be working fine until I applied updates and reloaded my package list from my previous install then I got the same conditions as before. I suspect that this my be a result of a bad package or update. What I want to know is if their is a way to display console text of the shutdown process so I can see where the system hangs and possibly remove the problem application. I have an AMD 64 bit desktop running with the same package lists and have no issues I suspect it is a hardware specific issue for the laptop or an error with a 32 bit install.
View 1 Replies View RelatedMy normal day to day user can't shutdown, restart, logout, etc...It just doesn't do anything at all when I try. This wasn't the case three days ago, just fresh installed and seeing the same problem (so it must be some setting saved in my home folder which wasn't wiped).
View 5 Replies View RelatedRunning Ubuntu 10.10 on a Gateway laptop (new). When I select "shutdown," it does a restart instead. All latest updates and additional drivers are installed. I may have upgraded to 10.10 from 10.04 - can't recall now. I have 10.10 on a Toshiba laptop that works fine.
View 9 Replies View RelatedHow come FC11 is set by default to reset the IPTables firewall to ACCEPT across the board each restart?
View 4 Replies View RelatedI have a second hard disk which has windows and C and D drives partitions. When I boot fedora 13, fedora automatically mounts them as 53 Gb Filessytem and 200 GB Filessytem. But when i try to browse to these filesystem, fedora ask me root password. How I can configure fedora so that it does not ask me root password and this change should be permanent ( surving computer shutdown and restart) ? I want these windows partitions to be reachable by me as the non-root user.Also given /dev/sdb (the windows disk) what is the command line to find out the filesytem path to which various paritions on /dev/sdb are mapped to?
View 2 Replies View RelatedWhenever I start my PC, the information of 'First Boot device' in BIOS changes from hard disk to CD-Rom. It happens with new start, I mean, if I restart my computer after resetting First boot device to hard disk, then priority does not change. Just as I switch on computer, a black screen appears with the message:
CMOS - checksum error - defaults loaded
press F1 to continue, DEL to enter setup
Recently it used to happen, that PC was not reading my hard disk containing GRUB. I have 2 hard disks. I switched the power cables of two hard disks. After that, both hard disks were shown by BIOS but the above mentioned error started appearing. Also grub takes too much time to load. It takes almost 20 seconds. Earlier I was using 'Puppy Linux'. In that, Grub was loading in fraction of second.
I just recently installed Kubuntu desktop onto Ubuntu and I don't have any shutdown or restart options shown in KDE, but they show up in Gnome. I initially installed Kubuntu using GDM instead of KDM and switched to KDM when I saw that my Gnome taskbars overlayed my KDE taskbars. To switch from GDM to KDM I used the following command:
sudo dpkg-reconfigure gdm
After enabling KDM the terminal suggested a command to configure KDM, however I can't remember the command. I ran it and I got a message that KDM was already configured.
