OpenSUSE :: No Color Option And Non Double Sided Printing
Apr 6, 2011
I have a Lexmark 736DN printer (color, 2-sided printing). With openSUSE 11.3, there was non specific driver to pick during printer installation: I picked up "Lexmark C772dn Foomatic/Postscript" and everything was fine (at least I didn't notice problems). With openSUSE 11.4, there's no such a driver! Even more, the list of drivers for lexmark is a lot, lot shorter than the list present in 11.3. C772dn is not present so i picked up "Lexmark 4076 - CUPS + Gutenprint v5.2.6": but there is no color option and non double sided printing! what's up? Maybe I miss a rpm with printer's drivers (not installed by default)?
View 7 Replies
ADVERTISEMENT
Apr 10, 2011
Just configured a new printer, an Oki B410d and have a problem with the automatic double-sided printing:it will only print with the "long-edge flip", no matter if I mark the "short-edge" option. This is very annoying, since I have to print lots of booklets on horizontal A4 paper, and reverse pages are printed upside-down! I'm using the "OKI B4000 / B400 / MB400 PCL" driver from Okidata web page.
View 5 Replies
View Related
Sep 2, 2010
Freshly installed F13
Although I can use system-config-printer to set double-sided printing for a network attached HP4650, jobs are printed single-sided. Double-sided printing worked with fc7 with the same printer.
View 3 Replies
View Related
Sep 10, 2010
I have a brother HL 4040CDN. I'm running ubuntu hardy. Does anybody know if there's a command line option that would allow me to print double sided from this machine? Or if there's a gui that I can download from Brother to specify preferences for this machine?
View 1 Replies
View Related
Aug 27, 2009
How to printing with double-sided print
In case of usling each driver...
I want to select 3 option double-sided,layout 2up,color(grayscale)
Configuring at cups web page [url]
"Inkjet Print Filter Ver.2.70" and "3.0" is as same as "Ver 2.60" In case of using each canon drivers,can't select color option window. And there is no color option on cups page,and system-config-printer. I thought any canon official driver may be no able to apply double-sided option.
View 4 Replies
View Related
Jul 23, 2010
I know for a fact manual duplex is supported by my printer since in windows it is able to do so unproblematically. After downloading official driver from Brother, printer works but File > Print > Page Setup > Layout > Two-sided > "NOT AVAILABLE" (option greyed out). I need the prompts to come up to tell me when to flip the pages and visually illustrate what needs to be done. This prompt and automatic behaviour by the printer is available in Windows. (Do not recommend to me Gnome Manual Duplex. It's a poor substitute for manual duplexing and doesn't even do what it claims to do.) How to get two-sided printing enabled?
View 6 Replies
View Related
Jan 29, 2010
Don't know where this should go, so I put it here for starters! I want to print documents on both sides of an A4 sheet, using a Brother HL-1230 printer. Is there a way of getting the odd numbered pages out first (then a pause?) and the even numbered pages after? To do this manually is tedious on a long (14 page) doc. Way back in the days of that other op. sys. I had a program (WordPerfect?) Whose printer driver would do this. Is there one for Ubuntu?
View 1 Replies
View Related
Feb 7, 2011
under 'System Settings < Keyboard & Mouse' I've already set the option 'Double click to open files and folders' but it doesn't seem to work with Dolphin.
View 4 Replies
View Related
Feb 2, 2010
I have an HP color laser printer and I am looking for a way to print black as black instead of using tri-color. For example If I print a document that has colored text then any black text is printed using the color cartridges rather then using black. I have been surviving by using windows XP in virtualbox but I'm hoping someone can help me with this. I've looked all over then net for a solution but I've found nothing. I remember having similar problems like this with older Macs because of postscript printing and I'm thinking this is the same problem but I don't know how to fix it. I've searched the forums as well but no joy.
View 3 Replies
View Related
Feb 25, 2010
I'm using a HP Deskjet F380 multifunction printer on a ubuntu 9.1 machine. It recognises it as an F300 series printer and so far it prints and scans very well. The problem is that I usually print 2 pages per sheet and double side on windows but I cannot do it on linux (in this case the option of printing odd pages first and even pages second is useless). I see there is an option in your printer preferences to print double side but it doesn't work.
View 3 Replies
View Related
Apr 1, 2010
The update manager recently installed a new version of CUPS on my 9.10.
Now when I print a simple Open Office document it comes out in magenta instead of black. Same applies to printing from gedit.
View 4 Replies
View Related
Jul 15, 2011
I have a custom LXDE installation with mostly the core applications. (Read my signature for a better picture.) Because it is custom I do not have the option to double click and run a Linux (not Windows) executable file. When I try to open the application it says choose an application to open it with. Do I have to install an application like gdebi (except for Linux executable) to be able to just double click and run it?
View 5 Replies
View Related
Feb 15, 2010
My Epson CX6000 works fine except it only prints in black whether I'm using image viewer, gimp, etc. It's been like this for some time, but I didn't need to print anything in color until now. I'm using Hardy Heron 8.04 and I didn't have any trouble installing the printer.
View 2 Replies
View Related
Apr 22, 2010
Is any one distribution of Linux, particularly suited for color management and printing? I have alot of photo printing to do that needs to be accurate color wise, I have already installed Open Suse with Gnome to try Linux, on an old machine and the printing although good, is very slow...
View 4 Replies
View Related
Jun 9, 2014
I have a mfc-440cn installed and working in Debian wheezy 7.4 (the last one) but I cant fix to it for printing in grey, I was using the pdf default reader and send some pages to printing indicating not to print them in color just greys colors but doesn't respect that order, it prints full color. When I see the conf page for the printer it stills have the configuration I did indicating to print grey but it ignores it and print as it wants (full color). Note that I installed thr mfc according the instructions from the brother support page with no trouble but is just that it only wants to print full color.
View 1 Replies
View Related
Apr 9, 2010
I have a shell script set up to print a test page on a couple of my rarely-used large format printers. These are expensive boys, and if they are left unused for too long, their cartridges dry up. So once a week, cron runs the script and everyone is happy. Except I'd like to change the print resolution for one of the printers. lpr does not seem to have an option to send a command to the printer for setting resolution. Is there another command that I could use under Ubuntu within Linux to do what lpr does, but also offers the setting of print resolution?
View 1 Replies
View Related
Jul 18, 2010
when I go to download 11.3 I am presented with the installation medium for a DVD installation with a button that says download DVD. Should there be an option to download an ISO option for a CD installation on this page along with the DVD version? Some of our older machines can only read CD's with a max size of 500+ megs.
View 3 Replies
View Related
Feb 16, 2010
I used the system/administration/printing option to set up a printer (Lexmark X4650).
The exact driver wasn't available, so I chose one 'close' to mine, but it wouldn't print.
I followed various threads to try to sort this, but now the system/administration/printing option has disappeared.
I can go in to [url] and set up a printer again, but this still doesn't work and the option in system/administration/printing still isn't there!
Whilst I see that there are issues with some Lexmark printers, which I can fire-fight, it's the fact that
I've obviously done something to delete the Printing option that is the issue!
View 2 Replies
View Related
Jun 19, 2010
My laptop's been locking up in Linux (Ubuntu, Backtrack, Puppy) periodically for a while now. When it locked up, it was always immune to the magic of SysRq, which I thought might indicate a hardware problem. It became so bad that I had to stop using the laptop.
Today, when I turned it on and tried to boot into Fedora 12, I got the following error (just once, it just locked up at various points during the splash screen after this once):
double fault: 0000 [#1] SMP
last sysfs file:
CPU 0
odules linked in:
Pid: 1, co m: swapper Not ta nted 2.6.32.11-99.fc 2.x86_64 #VGN-T 250N
RIP: 0010:[<ff
All the seemingly missing letters were really missing, not my typos.
As you can see, kernel version is 2.6.32.11-99.fc12.x86_64 and my laptop is a Sony Vaio TZ 250N (Core 2 Duo ULV 1.2GHZ). Note that with the other remaining kernels from the updates, nothing ever happened other than the locking up. The core temperatures hover pretty high, about 55-60C peak but this is still below the critical temp. Memtest came up clean when the problem first started happening.
View 3 Replies
View Related
Dec 26, 2010
I just installed Ubuntu Ultimate, and I found a theme I really liked that goes by the name "Azenis". However, I like the button arrangement on the default theme. Is there anyway to get the buttons on the left side of the screen, but still keeping the same look? I uploaded two screenshots just in case there is any confusion on the topic. (The blueish theme is Azenis, the default looking one is well, the default theme.)
View 5 Replies
View Related
Jun 14, 2011
Kernel 2.6.21.5, Slackware 12.0
KDE 3.5.7
(Mozilla) Firefox 2.0.0.4
Do color settings in the desktop environment affect color in the web browser? Thanks.
View 2 Replies
View Related
Jan 12, 2011
Can GNOME Color be used to alter this change directory color in Ambiance theme? I'd rather have white.
View 4 Replies
View Related
Jul 6, 2009
I am using the screen app, and have set bce to on, and issued the following commands to set my background and foreground color: tput setab 4; clear; tput setaf 7; clear;
This temporarily sets everything properly on my screen. However, when I issue any commands that change or set their own background color (for example, when I issue an "ls" command with colorized output), the background color gets lost for any new output and I have to reissue the commands listed above in order to retrieve my background color.Ideally I'd like to keep my background color when issuing these commands, as it serves as a good way to remind me of what environment I am currently issuing commands in.
View 1 Replies
View Related
Apr 27, 2010
I'm using 11.2 GNOME for a while now..
As far as I know, GNOME can't act like MS or OSX when we wan't to rename a file..you know, when you slightly re click the file name and its ready to be renamed.. instead, I should go right click - context menu - rename to do that.
Is there any setting or apps for these?
View 1 Replies
View Related
Jul 28, 2010
First thing I do is double click the top of the window to enlarge it and when I do that the window enlarges correctly, but it also lunches an app like the double click lags behind to click on an app after the window enlages, im using the 64bit version.
If u dnt knw wat I mean please try it out and tell me how I can fix this, just double click a sized window to make it fullscreen and tell me wat happens.
I also would like to knw if maybe its the fact that im using the 64bit version and that its glitchy.
View 7 Replies
View Related
Dec 6, 2010
Every time I get an email, I receive a couple of notifications for that email and the notification sound plays twice as well. If I disable the notifications for gmail plasmoid, I don't get any notifications at all - which means that the double notifications are really triggered by gmail plasmoid.
View 1 Replies
View Related
Aug 5, 2010
I have a photograph of a painting which was lying on a table.The camera angle caused the outline of the painting to be non-rectangular. Is there a transformation feature of GIMP that would let me pick the 4 corners of the painting and have the image transformed to a rectangular shape?
View 3 Replies
View Related
Feb 7, 2010
Whenever I run glxgears or glxinfo from an ssh or vnc session, I get "Error: couldn't get an RGB, double-buffered visual". I can run glx stuff fine on the console under KDE, but that's not practical for the intended users. I've tried updating drivers (it's a Dell R610 w/ Matrox G200ew videa), firmware, rpms, etc., even running ssh with -X or -Y, but to no avail.
View 9 Replies
View Related
Mar 30, 2011
This is probably not the best question i posted on a forum, but i want to make sure i got something right on the live-upgrade page (SDB:System upgrade - openSUSE)
It says: "Check if [URL] (replace 11.3 with your version)"
I have currently 11.3 installed and want to move to 11.4. Now when it says "replace 11.3 with your version" does that mean current or version that i am migrating to?
Worst thing is i have done this before (from 11.2 to 11.3, but am not sure how i interpreted it at that time)
View 2 Replies
View Related
Apr 10, 2011
how do I remove a double file like " New File" look through everything I own no explantion.
View 3 Replies
View Related
