Ubuntu :: Brother HL-1230 Printer / Two Sided Printing On A4 Sheet
Jan 29, 2010
Don't know where this should go, so I put it here for starters! I want to print documents on both sides of an A4 sheet, using a Brother HL-1230 printer. Is there a way of getting the odd numbered pages out first (then a pause?) and the even numbered pages after? To do this manually is tedious on a long (14 page) doc. Way back in the days of that other op. sys. I had a program (WordPerfect?) Whose printer driver would do this. Is there one for Ubuntu?
View 1 Replies
ADVERTISEMENT
Jul 23, 2010
I know for a fact manual duplex is supported by my printer since in windows it is able to do so unproblematically. After downloading official driver from Brother, printer works but File > Print > Page Setup > Layout > Two-sided > "NOT AVAILABLE" (option greyed out). I need the prompts to come up to tell me when to flip the pages and visually illustrate what needs to be done. This prompt and automatic behaviour by the printer is available in Windows. (Do not recommend to me Gnome Manual Duplex. It's a poor substitute for manual duplexing and doesn't even do what it claims to do.) How to get two-sided printing enabled?
View 6 Replies
View Related
Sep 10, 2010
I have a brother HL 4040CDN. I'm running ubuntu hardy. Does anybody know if there's a command line option that would allow me to print double sided from this machine? Or if there's a gui that I can download from Brother to specify preferences for this machine?
View 1 Replies
View Related
Jun 25, 2011
I have been printing with this laser printer (connected via LAN) for months without a single glitch, when suddenly today I had to quickly print a document. I could not print it. At first I thought the printer was off, then I double checked it was on. I restarted the CUPS server, reinstalled the printer in CUPS, nothing will work. When I send a print job, (I am using XFCE btw), I see the printer icon in the tasktray and it has a small warning sign.
Opening the print queue, I see "Processing - Printer Warning". In cups, I see nothing unusual. It says (in the printer queue): processing since Sat 25 Jun 2011 10:13:30 AM EDT. I can print a test page FROM the Printer web interface, confirming the printer works. I can print with the other printers. CUPS detects the printer and does not report anything unusual. What is going on with CUPS?
View 8 Replies
View Related
Sep 2, 2010
Freshly installed F13
Although I can use system-config-printer to set double-sided printing for a network attached HP4650, jobs are printed single-sided. Double-sided printing worked with fc7 with the same printer.
View 3 Replies
View Related
Apr 6, 2011
I have a Lexmark 736DN printer (color, 2-sided printing). With openSUSE 11.3, there was non specific driver to pick during printer installation: I picked up "Lexmark C772dn Foomatic/Postscript" and everything was fine (at least I didn't notice problems). With openSUSE 11.4, there's no such a driver! Even more, the list of drivers for lexmark is a lot, lot shorter than the list present in 11.3. C772dn is not present so i picked up "Lexmark 4076 - CUPS + Gutenprint v5.2.6": but there is no color option and non double sided printing! what's up? Maybe I miss a rpm with printer's drivers (not installed by default)?
View 7 Replies
View Related
Apr 10, 2011
Just configured a new printer, an Oki B410d and have a problem with the automatic double-sided printing:it will only print with the "long-edge flip", no matter if I mark the "short-edge" option. This is very annoying, since I have to print lots of booklets on horizontal A4 paper, and reverse pages are printed upside-down! I'm using the "OKI B4000 / B400 / MB400 PCL" driver from Okidata web page.
View 5 Replies
View Related
Aug 27, 2009
How to printing with double-sided print
In case of usling each driver...
I want to select 3 option double-sided,layout 2up,color(grayscale)
Configuring at cups web page [url]
"Inkjet Print Filter Ver.2.70" and "3.0" is as same as "Ver 2.60" In case of using each canon drivers,can't select color option window. And there is no color option on cups page,and system-config-printer. I thought any canon official driver may be no able to apply double-sided option.
View 4 Replies
View Related
Mar 28, 2011
Unusual problem here -I'm posting in hardware as I'm not certain where it fits.Home laptop (mainly wife's in use) upgraded from 11.3x86 last week to 11.4x64, pretty much everything is awesome.However, when she attempts to print a PDF with multiple pages per sheet (study notes),
View 3 Replies
View Related
Aug 26, 2010
I have a Epson SX215 and despite of being apparently installed well, everytime I try to print something I only get the printer take out all the sheet in blank.[URL]
View 3 Replies
View Related
Feb 27, 2010
I am using Ubuntu 9.10. I have a Brother MFC 240C printer. I installed the print driver from here. Driver installed with no problem. When I print something, it goes through the print que to the the printer with no error messages, however the printer never prints the document. When I take the printer off line, Ubuntu senses it's offline and when I return the printer online Ubuntu knows it's back online. So I know Ubuntu is talking to the printer. It's just the print jobs never print. I am dual booting with Windows XP. The printer works fine when in XP.
View 9 Replies
View Related
Mar 1, 2010
I'm using Ubuntu 9.10 on a Sony Z series laptop which is also dual booted with MS Vista. My Brother printer (which has wi-fi) has stopped printing with Ubuntu. The Brother does still print with Vista using the wireless connection.
I've tried deleting the network printer software and reinstalling it. The installation program will locate the Brother printer and it will appear to have been installed properly. When I try to do a test print using Ubuntu, the "document print status" window will indicate the print job is pending. However, it will stay pending indefinitely. I've used the printing troubleshooter guide and it has advised that:
- The queue 'Brother-HL-4070CDW' is not enabled. The reason given is: 'Unable to locate printer 'BRWCEB885'!'.
- To enable it, select the 'Enabled' checkbox in the 'Policies' tab for the printer in the printer administration tool. To start this tool, select System->Administration->Printing from the main menu.
When I go to the policies tab and check the 'Enabled' box and then try to apply this selection, the 'Enabled' box automatically unchecks and I get a print error message:
- Printer Error. There was problem sending document 'Test Page' (job 117) to the printer.
I seem to be caught in an endless loop without anything printing.
View 1 Replies
View Related
Aug 22, 2010
I'm running Ubuntu 10.04 64 bit. I just got a Brother hl-2140 printer installed the drivers via the brother site and I can't print pdf's. I can print gedit, openoffice, etc... but no PDF's. This is kind of a deal breaker.
View 2 Replies
View Related
May 26, 2011
I have switched entirely to linux I have all the windows programs I need running in Wine, but my only gripe is that in Windows I could print 20 pgs/min in Ubuntu I can currently print maybe 4 pgs/ 20 min. I downloaded extra CUPS drivers from synaptic for my printer along with the LPD network driver when I first configured the my brother network printer.
View 5 Replies
View Related
May 4, 2010
i installed the drivers from the brother website which seemed to go fine. when i go into the cups admin page, i can see the printer listed but when i send a test page to the device nothing happens. the job remains in the queue as processing. there's no firewall active and i've set apparmor to complain mode for cups (a brother tip).
View 1 Replies
View Related
May 30, 2011
This printer has worked fine with FC14 on my AMD x86_64 system for months using the printer drivers from the Brother Solutions Center web site (see below). I installed FC15 today from the network CD and installed the same printer drivers. Test print works fine, and just now this web page printed OK using Firefox. But when I try to print from LibreOffice Writer or Thunderbird, a message appears briefly at the bottom of my Gnome3 desktop that the job is being printed and then another message saying that printing is complete. Nothing is sent to the printer, however. In Thunderbird, the Print dialog window says the status of the MFC-240C is "No pages found!" I tried deleting the printer using System Setings -> Printers and reinstalling using system-config-printer, selecting the Brother MFC-240C, with no change.
Brother drivers:
mfc240clpr-1.0.1-1.i386.rpm
mfc240ccupswrapper-1.0.1-1.i386.rpm
View 14 Replies
View Related
Jun 9, 2014
I have a mfc-440cn installed and working in Debian wheezy 7.4 (the last one) but I cant fix to it for printing in grey, I was using the pdf default reader and send some pages to printing indicating not to print them in color just greys colors but doesn't respect that order, it prints full color. When I see the conf page for the printer it stills have the configuration I did indicating to print grey but it ignores it and print as it wants (full color). Note that I installed thr mfc according the instructions from the brother support page with no trouble but is just that it only wants to print full color.
View 1 Replies
View Related
Jan 1, 2010
I am running ubuntu 9.04 and am having trouble printing. My Brother DCP 330c printer is detected however I have to manually chose a printer driver all of which do not work with the printer. I have tried downloading a printer driver from the brother website and tried to install it.
View 2 Replies
View Related
Aug 14, 2010
This site has drivers for my new Brother HL-3040CN laser printer ... but it says its the wrong architecture when I try to open the first one with GDebi Package Installer. I'm kind of stuck now ...should I try just plugging the printer into the computer with the network cable and seeing if Ubuntu will automatically take care of drivers? For reference I saw this topic when I googled the issue [URL] This site says 64 bit drivers are available for Ubuntu 9.10, only 32 bit drivers are available for Ubuntu 10.04. I am running 10.04 (64bit) ... should I return the printer?
View 6 Replies
View Related
Jul 19, 2011
I had it printing until the last cups upgrade. Brother support thinks it is something to do with the upgrade. We did a reinstall of the printer driver. The printer works on Virtual Box and the scanner works on Ubuntu, but not the printer. What do I need to have the printer work under 11.04?
View 9 Replies
View Related
Jun 16, 2010
About a week ago I installed my first Linux (Ubuntu 10.04). Since then I've been trying to get my printer to work by following some of the instructions on the web.Unfortunately,as a newbie, I can't seem to get it right... The printer is - Brother DCP-135C.
View 4 Replies
View Related
Apr 20, 2010
I upgraded from Karmic to Lucid RC a couple of days ago and have been trying to work through a few problems since. One of these problems is printing with my Brother DCP506CN printer which was working in Karmic. However, I just can't seem to get it going in Lucid. I have followed the Brother linux install procedure, which worked for the the last few Ubuntu releases, but not for this one it seems.
View 3 Replies
View Related
Aug 18, 2010
I have read the threads and have downloaded the 4 drivers/files from the brothers site and installed them.. but still can not get my USB cabled printer to work what am I missing I am running Ubuntu 10.04 sounds like brother is not the printer to have in case their is no fix what brands of printers are best for compatibility?
View 1 Replies
View Related
Aug 22, 2010
Anybody else using this printer? I have tried the driver direct from Brother, requires cups and the driver.Both installed, both fail. I read on another forum to try a Brother HCL type and it works, but why?
View 3 Replies
View Related
Oct 12, 2010
I have a Brother MFC-240C inkjet printer & scanner. On installation of Maverick Meerkat v. 10.10, my scanner function failed. I added the same line into the file as for Lucid Lynx v. 10.04 and the scanner has scanned perfectly. The lines Brother gives are for the following file: Ubuntu 9.10, 10.04
1. Open "/lib/udev/rules.d/40-libsane.rules" file.
2. Add the following two lines to the end of the device list. (Before the line "# The following rule will disable ..."):
# Brother scanners
ATTRS{idVendor}=="04f9", ENV{libsane_matched}="yes"
above is found at: [URL]
View 6 Replies
View Related
Mar 9, 2011
I plan on changing brands in printer from HP to Brother in the near future. Will I need to completely remove HPLIP before installing Brother printer software pkg on Ubuntu 10.04?
View 6 Replies
View Related
Apr 17, 2011
I am unable to print on my Brother mcf 440cn printer. Every thing was working ok, today I finished some work in Open Office and could not print the saved file. I get an error unable to print msg. my printer is no longer recognized on the system. I reinstalled the driver no luck. I tested the printer with Windooze and every thing works fine
View 4 Replies
View Related
May 6, 2011
I'm trying to download this driver with my UBUNTU 11.04 but theres so many steps I'm not sure I'm doing it right. I downloaded SUSE but I dont know how to get it to run. I'm also in the process of downloading Cups But I don't know what to do with that either.
View 1 Replies
View Related
Mar 18, 2010
Is there a driver for the Printer Brother HL-2140 to be used with Ubuntu 9.10. and how to install.
View 1 Replies
View Related
Oct 16, 2009
It has worked in several releases 7.10 8.04 8.10 9.04 but stopped working in 9.04. I have tried everything (to long to list) need some bullet proof help!
View 1 Replies
View Related