Ubuntu :: Two Sided Printing Not Enabled For Brother HL 2040
Jul 23, 2010
I know for a fact manual duplex is supported by my printer since in windows it is able to do so unproblematically. After downloading official driver from Brother, printer works but File > Print > Page Setup > Layout > Two-sided > "NOT AVAILABLE" (option greyed out). I need the prompts to come up to tell me when to flip the pages and visually illustrate what needs to be done. This prompt and automatic behaviour by the printer is available in Windows. (Do not recommend to me Gnome Manual Duplex. It's a poor substitute for manual duplexing and doesn't even do what it claims to do.) How to get two-sided printing enabled?
View 6 Replies
ADVERTISEMENT
Sep 10, 2010
I have a brother HL 4040CDN. I'm running ubuntu hardy. Does anybody know if there's a command line option that would allow me to print double sided from this machine? Or if there's a gui that I can download from Brother to specify preferences for this machine?
View 1 Replies
View Related
Jan 29, 2010
Don't know where this should go, so I put it here for starters! I want to print documents on both sides of an A4 sheet, using a Brother HL-1230 printer. Is there a way of getting the odd numbered pages out first (then a pause?) and the even numbered pages after? To do this manually is tedious on a long (14 page) doc. Way back in the days of that other op. sys. I had a program (WordPerfect?) Whose printer driver would do this. Is there one for Ubuntu?
View 1 Replies
View Related
Jul 23, 2009
I believe I have installed my Brother HL 2040 printer on my Fedora 11 64 bit system. However, every time I click printer the printer goes through its warm up procedure but it does not print anything. There is paper in the tray and I know it was working when I was running Fedora 10. It is shown under the Printers heading under Administration.
View 4 Replies
View Related
Dec 22, 2010
I tried to print something today with my Brother HL-2040 series printer, and it seems like there are no drivers for that particular model. Is there a source I haven't thought of, or are there really no drivers?
View 5 Replies
View Related
Jul 5, 2010
In the past when I had Slackware 12 with brother HL-2040 printer drivers installed, the printer was working fine. Then I upgraded to slackware 13, but I had too many problems with it so I downgraded back to 12 and reinstalled everything related to slackware 12. Now I can't get the printer to work properly. I installed both the LPR and the CUPS drivers (in RPM packages) provided by brother for linux. I find that now every time I try to print something (even graphics) in KDE 3.5 (for slackware 12), the printer prints excessive pages where the first page starts with something like this:
%!PS-Adobe-3.0
%%LanguageLevel: 1
Are there any special settings that I am unaware of that I should be changing in order for the proper printout to appear? Is there something special that I have to install that I wasn't previously told about?
View 5 Replies
View Related
Aug 5, 2011
I'm trying to get a Brother HL-2040 printer working, without much success. I installed the brother-cups driver, but that didn't work. When I try to print, the printer just shoots out blank pages, and the only way I can stop it is by unplugging the printer. Worked OK on Ubuntu 10.10. I have gnome fallback, if that matters. There's a post saying that I need to download a ppd file, [URL] but when I try to get it, it opens a page instead of downloading a file. Also the information is from 2008, and I don't know how well that will work with all the changes that have been made to Ubuntu and the newer kernel. I got lucky! went to: [URL] and got the .deb files for the lpr driver and the cups driver. Had to use sudo dpkg -i in the terminal, as I couldn't get the software GUI to work. But it prints.
View 1 Replies
View Related
Sep 12, 2009
I am having difficulty with my brother hl-2040 printer. Linux recognizes the printer and it's set as the default. The job shows up in the printer queue as completed, but nothing comes out of the printer.
View 5 Replies
View Related
Feb 6, 2011
I cannot modify my printer in Cups. In the past when I wanted to add a printer, or modify an installed printer, I clicked on the Admin tab, and I get a prompt to enter a password. I never get the prompt to enter user - root and the root password. So I can not add a printer, or modify one that is installed. My Brother HL-2040 is still working, I can print jobs O.K. it will not print test page. Why do I care? I want to have a better understanding of the location on the lpr and cupswrapper drivers on this system.
I have installed Slackware 13.1 on a second drive, and am trying to convert to that system. In 13.1 cups asks me for Admin user and password, I can enter root + password, and add a printer, and Mandy used to. However, in 13.1 after converting the .rpm files to .tgz files and installing them with pkgtool, I can not 'see' the lpr or cupswrapper driver in 13.1. I wanted to see what it looked like in Mandriva, however I can't and don't know why.
View 7 Replies
View Related
Mar 14, 2010
I have openSUSE 11.2 and printer Brother HL-2040 connected to my openSUSE laptop. It was correctly recognized by manufacturer and model and was "automagically" installed by downloading the appropriate driver. Whenever I click "print" its name correctly appears on the page on which you choose where to send the print jobs to. And when I click "print" it prints... empty pages. When I chose to print the test page, 10 empty pages came out.
This printer worked just fine under Ubuntu 9.04 and winXP. I read the topic here about HL-2040 in openSUSE 11.2 using the driver of 2060 but upon checking both the printer config page and CUPS web admin page it was confirmed that the driver is actually the correct required one, HL-2060 Foomatic/Postscript.
View 2 Replies
View Related
Sep 2, 2010
Freshly installed F13
Although I can use system-config-printer to set double-sided printing for a network attached HP4650, jobs are printed single-sided. Double-sided printing worked with fc7 with the same printer.
View 3 Replies
View Related
Apr 6, 2011
I have a Lexmark 736DN printer (color, 2-sided printing). With openSUSE 11.3, there was non specific driver to pick during printer installation: I picked up "Lexmark C772dn Foomatic/Postscript" and everything was fine (at least I didn't notice problems). With openSUSE 11.4, there's no such a driver! Even more, the list of drivers for lexmark is a lot, lot shorter than the list present in 11.3. C772dn is not present so i picked up "Lexmark 4076 - CUPS + Gutenprint v5.2.6": but there is no color option and non double sided printing! what's up? Maybe I miss a rpm with printer's drivers (not installed by default)?
View 7 Replies
View Related
Apr 10, 2011
Just configured a new printer, an Oki B410d and have a problem with the automatic double-sided printing:it will only print with the "long-edge flip", no matter if I mark the "short-edge" option. This is very annoying, since I have to print lots of booklets on horizontal A4 paper, and reverse pages are printed upside-down! I'm using the "OKI B4000 / B400 / MB400 PCL" driver from Okidata web page.
View 5 Replies
View Related
Aug 27, 2009
How to printing with double-sided print
In case of usling each driver...
I want to select 3 option double-sided,layout 2up,color(grayscale)
Configuring at cups web page [url]
"Inkjet Print Filter Ver.2.70" and "3.0" is as same as "Ver 2.60" In case of using each canon drivers,can't select color option window. And there is no color option on cups page,and system-config-printer. I thought any canon official driver may be no able to apply double-sided option.
View 4 Replies
View Related
Feb 27, 2010
I am using Ubuntu 9.10. I have a Brother MFC 240C printer. I installed the print driver from here. Driver installed with no problem. When I print something, it goes through the print que to the the printer with no error messages, however the printer never prints the document. When I take the printer off line, Ubuntu senses it's offline and when I return the printer online Ubuntu knows it's back online. So I know Ubuntu is talking to the printer. It's just the print jobs never print. I am dual booting with Windows XP. The printer works fine when in XP.
View 9 Replies
View Related
Mar 1, 2010
I'm using Ubuntu 9.10 on a Sony Z series laptop which is also dual booted with MS Vista. My Brother printer (which has wi-fi) has stopped printing with Ubuntu. The Brother does still print with Vista using the wireless connection.
I've tried deleting the network printer software and reinstalling it. The installation program will locate the Brother printer and it will appear to have been installed properly. When I try to do a test print using Ubuntu, the "document print status" window will indicate the print job is pending. However, it will stay pending indefinitely. I've used the printing troubleshooter guide and it has advised that:
- The queue 'Brother-HL-4070CDW' is not enabled. The reason given is: 'Unable to locate printer 'BRWCEB885'!'.
- To enable it, select the 'Enabled' checkbox in the 'Policies' tab for the printer in the printer administration tool. To start this tool, select System->Administration->Printing from the main menu.
When I go to the policies tab and check the 'Enabled' box and then try to apply this selection, the 'Enabled' box automatically unchecks and I get a print error message:
- Printer Error. There was problem sending document 'Test Page' (job 117) to the printer.
I seem to be caught in an endless loop without anything printing.
View 1 Replies
View Related
Aug 22, 2010
I'm running Ubuntu 10.04 64 bit. I just got a Brother hl-2140 printer installed the drivers via the brother site and I can't print pdf's. I can print gedit, openoffice, etc... but no PDF's. This is kind of a deal breaker.
View 2 Replies
View Related
May 26, 2011
I have switched entirely to linux I have all the windows programs I need running in Wine, but my only gripe is that in Windows I could print 20 pgs/min in Ubuntu I can currently print maybe 4 pgs/ 20 min. I downloaded extra CUPS drivers from synaptic for my printer along with the LPD network driver when I first configured the my brother network printer.
View 5 Replies
View Related
May 4, 2010
i installed the drivers from the brother website which seemed to go fine. when i go into the cups admin page, i can see the printer listed but when i send a test page to the device nothing happens. the job remains in the queue as processing. there's no firewall active and i've set apparmor to complain mode for cups (a brother tip).
View 1 Replies
View Related
May 30, 2011
This printer has worked fine with FC14 on my AMD x86_64 system for months using the printer drivers from the Brother Solutions Center web site (see below). I installed FC15 today from the network CD and installed the same printer drivers. Test print works fine, and just now this web page printed OK using Firefox. But when I try to print from LibreOffice Writer or Thunderbird, a message appears briefly at the bottom of my Gnome3 desktop that the job is being printed and then another message saying that printing is complete. Nothing is sent to the printer, however. In Thunderbird, the Print dialog window says the status of the MFC-240C is "No pages found!" I tried deleting the printer using System Setings -> Printers and reinstalling using system-config-printer, selecting the Brother MFC-240C, with no change.
Brother drivers:
mfc240clpr-1.0.1-1.i386.rpm
mfc240ccupswrapper-1.0.1-1.i386.rpm
View 14 Replies
View Related
Jun 25, 2011
I have been printing with this laser printer (connected via LAN) for months without a single glitch, when suddenly today I had to quickly print a document. I could not print it. At first I thought the printer was off, then I double checked it was on. I restarted the CUPS server, reinstalled the printer in CUPS, nothing will work. When I send a print job, (I am using XFCE btw), I see the printer icon in the tasktray and it has a small warning sign.
Opening the print queue, I see "Processing - Printer Warning". In cups, I see nothing unusual. It says (in the printer queue): processing since Sat 25 Jun 2011 10:13:30 AM EDT. I can print a test page FROM the Printer web interface, confirming the printer works. I can print with the other printers. CUPS detects the printer and does not report anything unusual. What is going on with CUPS?
View 8 Replies
View Related
Jun 9, 2014
I have a mfc-440cn installed and working in Debian wheezy 7.4 (the last one) but I cant fix to it for printing in grey, I was using the pdf default reader and send some pages to printing indicating not to print them in color just greys colors but doesn't respect that order, it prints full color. When I see the conf page for the printer it stills have the configuration I did indicating to print grey but it ignores it and print as it wants (full color). Note that I installed thr mfc according the instructions from the brother support page with no trouble but is just that it only wants to print full color.
View 1 Replies
View Related
Dec 26, 2010
I just installed Ubuntu Ultimate, and I found a theme I really liked that goes by the name "Azenis". However, I like the button arrangement on the default theme. Is there anyway to get the buttons on the left side of the screen, but still keeping the same look? I uploaded two screenshots just in case there is any confusion on the topic. (The blueish theme is Azenis, the default looking one is well, the default theme.)
View 5 Replies
View Related
Aug 5, 2010
I have a photograph of a painting which was lying on a table.The camera angle caused the outline of the painting to be non-rectangular. Is there a transformation feature of GIMP that would let me pick the 4 corners of the painting and have the image transformed to a rectangular shape?
View 3 Replies
View Related
May 31, 2010
I expected more from ubuntu 10.4 with regards to printing with exact size photos and with poor auto colour printing but the situation remains unchanged! for instance .. the photo size configurations for ubuntu/fspot/gimp and others are not compatible with my printers (HP and Brother) .. here in Europe a typical standard size photo (10x15inches or 150x100mm are not even on the Ubuntu listing? I have tried all listed possibilities including "custom" (which does not seem to ever work correctly?)and the result at best is photos with uneven boarders or at worse my printer goes a bit crazy with much wasted photo paper and expensive ink ...even photos selected for "no boarders" still produces photos with the self same uneven boarders.
I have tried pretty much everything over time following advice in this forum and including using HPlip and updating drivers required for my Brother printer but the root problem seemingly lies with the Ubunto photo size setup listing. Working with Ubuntu over the years I have found that it can do pretty much everything that Windows can do except for this dam ongoing photo quality and configuration problem.
View 9 Replies
View Related
Jul 28, 2010
We developed qt based application in linux. I wish to stop ejecting the paper after printing over.How to do it.
View 2 Replies
View Related
Apr 30, 2011
I have a Brother HL-2270DW that I managed to get working in 10.10. Today I installed 11.04, but when I try to set up the printer by following the instructions on the Brother website, I get the following error:
Code:
sudo dpkg -i --force-all "hl2270dwlpr-2.1.0-1.i386.deb"
[sudo] password for xxxxxx:
dpkg: warning: overriding problem because --force enabled:
package architecture (i386) does not match system (amd64)
[Code]....
View 9 Replies
View Related
Mar 7, 2010
I'm using 9.10 on x86 architecture. I've searched the forums and anything related to scanning talks about editing /etc/udev/rules.d/45-libsane.rules which doesn't seem to exist on my system. Judging from the dates most of these posts probably relate to intrepid or jaunty. XSane just says 'no devices available'. Printing works fine.
View 6 Replies
View Related
Jan 1, 2010
I am running ubuntu 9.04 and am having trouble printing. My Brother DCP 330c printer is detected however I have to manually chose a printer driver all of which do not work with the printer. I have tried downloading a printer driver from the brother website and tried to install it.
View 2 Replies
View Related
May 18, 2010
During installation of Ubuntu 10.04, there was no driver found for my Brother MFC-665CW printer/scanner. However, I recently learned on the Forum that there is a printer driver available for the MFC-665CW through Synaptic that can be accessed by searching on printer name. I got it, and it works great. I've not been successful in locating a driver for the scanner part of the MFC-665CW. Does anyone know if there is a driver available on Synaptic that will work for the scanner on a MFC-665CW, and if so how to get to it (i.e., what to search on to locate it)?
View 3 Replies
View Related
