OpenSUSE Wireless :: Iwlist Produces No Scan Result For Wlan0
Apr 29, 2010
This is probably the 1 millionth post about WIFI issues. I have tried many sources on the internet but cant get my wireless to work. I have been using another version of linux for long time. But recent edition of that particular linux does not support my wifi any more. Just recently i have tried SuSE and almost fell in love with it. The only problem, WIFI.
I got a Linksys WUSB54GC USB wifi stick which uses RT2800USB native driver. I installed SuSE from the scratch and it found the wifi stick installed the drivers. My only problem is it does not scan for wireless networks. I haev two wifi networks around here. I can connect to them with windows computer with the same wifi stick.
I have tried iwconfig iwlist ifup but i am stuck exactly what to do.
I get the following messages:
It seems to me i am sooo close.
View 1 Replies
ADVERTISEMENT
Mar 21, 2011
I have configured a wireless pcmcia card using ndiswrapper. I'm sure that works, as with the command "iwlist wlan0 scan" gives me back
the list of detected wireless networks. At this point I was wondering: is there a way to detect the new interface (wlan0) with network manager? Even after enabling the wifi card the network manager gnome applet always finds only eth0.
View 2 Replies
View Related
Nov 19, 2010
Just purchased this USB wifi NIC. installs and work perfect under Win XP, how ever I can't seem to get working on my opensuse 11.3
Network manager did not recognize the NIC out of the box (still doesn't) so I started trawling the forum and I've read both wireless 'stickys'.
When out of the box did not work I installed the rt3070sta-kmp-desktop - RT3070 Wireless Lan Linux Driver from the repos.
My Nic and kernel version
Code:
lsusb
Bus 001 Device 004: ID 148f:3370 Ralink Technology, Corp.
uname -a
XXXXXXXX 2.6.34.7-0.5-desktop #1 SMP PREEMPT 2010-10-25 08:40:12 +0200 x86_64 x86_64 x86_64 GNU/Linux
[Code]....
View 9 Replies
View Related
Mar 26, 2011
I have a netbook with a onboard WIFI card(Broadcom 5727(rev 01)) and a Realtek RTL8191S USB WIFI donge. Both work.
My problem is; I can't get these to scan for AP's running on channel 12 and 13.
Is there a way to fix this?
Distro: Slackware 13.1
Kernel: 2.6.33.4-smp
View 1 Replies
View Related
Jan 9, 2011
I installed squeeze on my eeepc 1015ped and downloaded the correct firmware-brcm80211 drivers but every time I scan for my network using iwconfig wlan0 scan or wicd, my computer completely freezes. I previously had a solid install running xmonad, and wicd was working like a charm (using the same broadcom driver) but i tinkered too much with it and decided to do a fresh install. I haven't quite run into a problem like this before.
View 2 Replies
View Related
Jun 24, 2010
generally whenever there is a wifi connection available fedora will detect and i can establish the connection but today i am not able to see any such wireless network available. I am in a wifi accessible area and i need to know how this can be rectified. i tried iwlist scan in the terminal but that doesnt seem to work
View 1 Replies
View Related
Nov 14, 2010
I'm running Ubuntu 10.04 server 64bit. I'm trying to get my ASUS PCE-N13 wireless PCI card working for searching and connecting to wireless networks. But I have no networks applet appearing in the panel. system->preferences->sessions has the Network Manager enabled The Notification Area is added to the panel. system->preferences-Network Connections-->Wireless[tab] shows a pink box, with no available connections.
[Code]....
View 9 Replies
View Related
Feb 2, 2011
I have a Linksys AE1000 wireless adapter and I used the post found here to install the drivers.I've figure I installed the drivers successfully because when I use "iwlist ra0 scan" I get a listing of available networks.The problem is, I can only connect to unsecured networks. For instance,
Code:
sudo iwconfig ra0 essid "unsecure network"
The above command connects me but the one below doesn't
[code]....
View 2 Replies
View Related
Jun 14, 2010
I have used ubuntu in the past but had a lot of hardware issues with it and unfortunately moved back to windows (( BUT i have tried Ubuntu again and all seems to work great except wifi My wifi connection is sort of working because when i run SUDO IWLIST SCAN it does pull up all available networks. But in the network manager icon on the panel i left click but i see no networks and can't connect to anything. I WOULD LOVE TO keep Ubuntu and use it permanently but I must get wifi working or else this won't be possible.
View 4 Replies
View Related
Jan 2, 2011
I scanned pen drive using clamscan and I closed the terminal after scanning without reading the result. Now one of my folder is missing in pen drive. I wanted to know if clamav deleted it. So I want to view the last scan result.
View 3 Replies
View Related
Oct 27, 2010
1 ) make and model of wireless device Athreos 5k
2 ) driver version in use dont know
3 ) any error message. -
abhishek:/ # sudo /usr/sbin/iwlist scan
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
wlan0 Interface doesn't support scanning : Network is down
4 ) what you have tried to rectify the problem.
Tried to install all the patches.
5 ) any trouble-shooting guide you have tried to follow. - The previous two stickies
6 ) openSUSE version 11.3
7 ) type /sbin/lspci -v" in a terminal; copy and paste the section that identifies your wireless card and it's chipset. 07:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01)
Subsystem: Hewlett-Packard Company Device 137a
Flags: bus master, fast devsel, latency 0, IRQ 23
Memory at c2000000 (64-bit, non-prefetchable) [size=64K]
[code]....
View 9 Replies
View Related
Feb 28, 2010
After executing glxgears, my laptop got crashed.
I pressed Power Button and I turn it off. When I turn on the system again, the wlan0 dosent work.
I tried:
Code:
The result:
Code:
I tried:
Code:
The result:
Code:
RTNETLINK answers: No such file or directory
Cannot enable interface wlan0. interface wlan0 is not up
View 4 Replies
View Related
Aug 12, 2010
Question. How do I enable wlan0 and verify it worksSo far I get.
# /usr/sbin/iwlist scan
wlan0 Interface doesn't support scanning : Network is down
# hwinfo --wlan
[code].....
View 9 Replies
View Related
Jan 25, 2010
I have two usb wlan cards. In 11.2 whenever i start connection with the second one (wlan1) via knetworkmanager, the latter also starts a connection using the first one , leading to wlan problems,
In 11.1 i had no such problems because i could select the one to be used in knetworkmanager, and only that one was used by knetworkmanager.my current solution is to
su
ifdown wlan0
logout
this shuts down the first card but i have to do this manually after every restart. one thing: don't come with "deactivate in bios" - i knoe this but playing around in bios everytime i switch between windows and linux is no option. So how can i prohibit permanently that knetworkmanager uses the first one (wlan0)? putting in some place of suseconfigs a rmmod <driver>? where? /etc/sysconfig ??
View 1 Replies
View Related
Mar 25, 2010
I have to use ndiswrapper to get my wireless card to work (Cheap D-link usb wireless). I have never had a problem in ubuntu releases with getting it up and going, but in Fedora and now Opensuse I am struggling. I have everything setup with no errors. Ndiswrapper lists my drivers as installed and my hardware present. lsusb also has it listed. but when I modprobe ndiswrapper, I am getting no errors, but I am also not getting wlan0 to show when using iwconfig. I also noticed when modprobed the wireless card's light isn't coming on like ubuntu.
View 8 Replies
View Related
Feb 20, 2011
I have suse 11.3 tried to get wireless to workI issued command ifconfig and wlan0 not shown. One replier suggested that I need to get this working
View 9 Replies
View Related
Jul 24, 2011
I have a 32-bit openSUSE 11.4 (2.6.37.6-0.5-default) installation with a
WNBA3100v2 wireless USB card and a 100Base-TX NIC running on a Dell 4700c:
Code:
BCM4401-B0 100Base-TX (Not connected)
MAC : YY:YY:YY:YY:YY:YY
BusID : 0000:04:07.0
Device Name: eth0
[Code].....
View 9 Replies
View Related
Aug 11, 2011
I've just a had laptop meltdown which resulted in the acquisition of a replacement (HP635) sporting a realtek wireless NIC. Found the drivers and installed them and all is well. HOWEVER, the card is not activated on wake from sleep mode. This is kind of astounding to me. Every crappy windows version that I've used can handle this situation. Many searches, however have failed to yield any help. After every resume from sleep mode I have to run ifup to start wlan0. Surely this is not the only way it can be? I have to assume that I'm not getting something simple, and someone here can point out my failing. or if you can just sympathize. running 11.4 here using the realtek 8192 driver set to start at boot time. Though none of the other settings have had any effect on this problem.
View 5 Replies
View Related
Sep 13, 2011
so what will i do ??
Code:
ifconfig wlan0 up
SIOCSIFFLAGS: Unknown error 132
[code]....
View 4 Replies
View Related
Jul 28, 2011
I was trying to connect to wireless via cmd:
* ifconfig wlan0 up
* iwconfig wlan0 essid 'XXX'
* iwconfig wlan0 key XXXXXXX
* dhclient wlan0 -> here i get error:
ls: cannot access /var/run/netconfig//wlan0/: no such file or directory
View 1 Replies
View Related
Aug 11, 2011
I have installed open suse 11.4, gnome but no luck with wireless settings so far. kernel version is iwl3945 here is stuff that i did but it says "scan is deprecated"
linux-1f6k:/home/rajbanul # dmesg | grep firmware
[ 7.249018] tg3 0000:18:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
[code].....
View 3 Replies
View Related
Nov 20, 2010
i have HP Compaq 6710b with Wlan Broadcom 4321AG i can't connect to network and i can't scan
View 6 Replies
View Related
Nov 10, 2010
I have just upgraded my system to Fedora 14. One thing I noticed after running some applications on it is that it is not possible anymore to figure out on what frequency a wireless interface is using. If I set a wireless interface to monitor mode and perform the iwconfig or iwlist command, in the past, I could see the frequency used on the interface, but now, this information is not present anymore. My wireless interfaces are in monitor mode.
Has the frequency information been removed from iwconfig or iwlist commands? If it has, is there another way to report this information?
Here is an output from iwconfig on my system:
View 4 Replies
View Related
Dec 23, 2009
Cannot Connect to a wireless network using a USB Belkin 802.11g Model F5D7050: Setting up a new pc is running opensuse 11.2 (i586) KDE 4.3.1
Question1) The HCL shows a version, how do I find what version i have?
Question2) Why is rt73.bin not being loaded? I ask this because the file is located in Root/lib/firmware
Question3) Why is Configure Desktop > Network Manager > Wifi is blanked out as if doesnt exist?
Question 4) when using YAST > Network Settings > Initially under wireless network card configuration I can scan the area and find networks successfully (I got 2, one as a wifii hotspot from my pda cell phone, the other is the standard wireless network for laptops and such).... but if i use kinternet >wlan0 > wireless connection, nothing will be found! I did a search on the /var/bootlog msg for "switch" and "radio", for radio I found the following:
<6>[ 9.108858] Registered led device: rt73usb-phy1::radio
<6>[ 9.108884] Registered led device: rt73usb-phy1::assoc
<6>[ 9.108909] Registered led device: rt73usb-phy1::quality
<6>[ 9.109386] usbcore: registered new interface driver rt73usb
[Code].....
View 1 Replies
View Related
Oct 29, 2010
I have an Atheros ar2427 chip in my Asus EEE 1001P and I'm using WICD to configure it. I can scan for wlans, but I can not connect. I installed the compat wireless package from yast and I downloaded the source from the compat wireless site and tried to compile it (which seems to be the solution for Ubuntu) but I got an error and an interesting warning
Code:
Linux linux-0yl2.site 2.6.34-12-desktop #1 SMP PREEMPT 2010-06-29 02:39:08 +0200 i686 i686 i386 GNU/Linux
[code]....
View 6 Replies
View Related
Mar 28, 2010
A friend who switched ISP's gave me his old Linksys WRT54-G wireless router. I went through the installation procedure and had a wireless connection up and running - smiley face. I had security set up for WPA, and decided to upgrade it to WPA2. Another smiley face. When I went to connect (had already done so successfully), I noticed it referred to my wireless as Linksys - I was expecting to see the SSID. So I started playing around in Network Manager and now I have things all effed up.
Don't know exactly what I did, but now I have no wireless. So I ran a few commands (lshw -C network, iwconfig, ifconfig, and iwlist scan), and looking at the results I see what appear to be inconsistencies in the output. I've posted them below, and make the following observations:
1. Under the lshw it refers to my wireless connection logical name as wmaster0, and has the correct MAC address, etc.
2. Under the iwconfig it says, 'wmaster0 no wireless extensions', but then refers to wlan0 as the wireless connection (although it does not seem to be running).
3. Under ifconfig I see both a wlan0 and a wlan0:avahi. The wlan0 has no IP, the wlan0:avahi does, but it is incorrect.
[Code]...
View 7 Replies
View Related
Mar 11, 2010
The adapter I purchased (Zonet ZEW2508 ) uses the Ralink 2070 chipset - a fact that originally excited me because Ralink seems to be fairly loving to the Linux community. However, despite my best efforts I can't get the thing to work. Initially I tried following directions to set up the driver you can download from the Ralink website. The directions I found were written February first, and Ralink updated the driver February eighth - so as far as I can tell the directions no longer work. After screwing around trying to figure that out for a while I decided to give ndiswrapper a go.
Initially this seemed promising. I just harvested the drivers from the CD and followed one of the many ndiswrapper directions available - most helpful seemed initially to be the Ndiswrapper Troubleshooting Guide found in this forum, however the solutions offered there didn't work either. When I throw an ndiswrapper -l into the terminal it looks promising at first, it tells me the driver is installed and the device is present, but it just doesn't work. When I try iwconfig, or iwlist scan it tells me "no wireless extensions," and "interface doesn't support scanning" respectively. The only devices even listed are lo, eth0, and pan0. There's no wlan0 or anything of the sort.
View 1 Replies
View Related
Aug 17, 2011
HTML Code: first I'll provide the requested information (from the sticky)
64-bit openSuSE 11.4
uname -a output
Linux linux-mx43 2.6.37.6-0.7-desktop #1 SMP PREEMPT 2011-07-21 02:17:24 +0200 x86_64 x86_64 x86_64 GNU/Linux
dmesg | grep firmware
[ 127.965048] b43legacy-phy0: Loading firmware version 0x127, patch level 14 (2005-04-18 02:36:27)
lspci output:
[Code]...
I've configured the device for my network's settings in YaST's Network Settings tool. Is the card turned off by the kill switch? Where do I find the kill switch?
View 7 Replies
View Related
Aug 8, 2010
have a dell Inspiron 1501 with ubuntu 10.0.4 I want to rename my wireless card from eth1 to wlan0 as I use conkyrc and it will not read my wireless strength or my ssid cuz it thinks it's a ethernet card and not wireless card. I know this for a fact because peppermint os my wireless card was wlan0 and it worked just fine.
View 1 Replies
View Related
Oct 8, 2010
trying to connect wireless on wlan0 intel pro wireless 4965 AG or AGN
View 1 Replies
View Related
