Ubuntu Networking :: No Nm-applet - Couldn't Initialize The D-Bus Manager - Iwlist Scan Detects Networks
Nov 14, 2010
I'm running Ubuntu 10.04 server 64bit. I'm trying to get my ASUS PCE-N13 wireless PCI card working for searching and connecting to wireless networks. But I have no networks applet appearing in the panel. system->preferences->sessions has the Network Manager enabled The Notification Area is added to the panel. system->preferences-Network Connections-->Wireless[tab] shows a pink box, with no available connections.
I have a Linksys AE1000 wireless adapter and I used the post found here to install the drivers.I've figure I installed the drivers successfully because when I use "iwlist ra0 scan" I get a listing of available networks.The problem is, I can only connect to unsecured networks. For instance,
Code: sudo iwconfig ra0 essid "unsecure network" The above command connects me but the one below doesn't
I have used ubuntu in the past but had a lot of hardware issues with it and unfortunately moved back to windows (( BUT i have tried Ubuntu again and all seems to work great except wifi My wifi connection is sort of working because when i run SUDO IWLIST SCAN it does pull up all available networks. But in the network manager icon on the panel i left click but i see no networks and can't connect to anything. I WOULD LOVE TO keep Ubuntu and use it permanently but I must get wifi working or else this won't be possible.
I have configured a wireless pcmcia card using ndiswrapper. I'm sure that works, as with the command "iwlist wlan0 scan" gives me back the list of detected wireless networks. At this point I was wondering: is there a way to detect the new interface (wlan0) with network manager? Even after enabling the wifi card the network manager gnome applet always finds only eth0.
generally whenever there is a wifi connection available fedora will detect and i can establish the connection but today i am not able to see any such wireless network available. I am in a wifi accessible area and i need to know how this can be rectified. i tried iwlist scan in the terminal but that doesnt seem to work
so my wireless isn't working. My netbook wireless detects the available networks but when I try to connect it doesn't. The box that asks me to put in the password occasionally shows up but it still doesn't load. I even tried re-installing Ubuntu and didn't fix anything.I'm using kernel version 2.6.35-22-generic and
Basically, I just installed Fedora in my desktop (use it on my laptop), and have a big problem, which is that Fedora (13), detects my wireless card (Edimax nMAX EW-7728IN), but when I try to connect to my wireless networks (WEP & WPA) it hangs and asks again for the password. I know the problem isn't from my routers,since I'm right now connected via Fedora 13 in my laptop.
create a VM here with virsh. I've managed to create the XML file and got it to work properly, however running it is the problem. These are the errors I get error: Failed to start domain Cent-OS, internal error process exited while connecting to monitor: open /dev/kvm: No such file or directory ,Could not initialize KVM, will disable KVM support qemu: could not open disk image /media/55D123D9E79ABF54/VM/Cent-OS-5.5.img: Permission denied
This is probably the 1 millionth post about WIFI issues. I have tried many sources on the internet but cant get my wireless to work. I have been using another version of linux for long time. But recent edition of that particular linux does not support my wifi any more. Just recently i have tried SuSE and almost fell in love with it. The only problem, WIFI.
I got a Linksys WUSB54GC USB wifi stick which uses RT2800USB native driver. I installed SuSE from the scratch and it found the wifi stick installed the drivers. My only problem is it does not scan for wireless networks. I haev two wifi networks around here. I can connect to them with windows computer with the same wifi stick.
I have tried iwconfig iwlist ifup but i am stuck exactly what to do.
I bought this wireless card because alot of people said it worked out of the box and it almost worked... Ubuntu recognizes it and the wireless module is activated I just can't seem to scan for networks or connect to them... So I am listing some outputs for you guys and hopefully there is an easy fix.
I realize that Ubuntu recognizes the card, but I'm not sure why it's not picking up any networks that are around and says "disconnected", even though I've made sure that the wireless network light is enabled on the netbook.
I use network manager applet 0.7.1. I had set the automatic wireless connection to my my wireless network (WPA key secured). Recently, I get the following problem: At the automatic connection, I get the message: Network manager applet (/usr/bin/mn-applet) needs default keyering. As I don't know what it is to type it and then, deny or OK, it doesn't get connected to my wireless network.
I'm using Ubuntu 10.04 on my old HP laptop, and I can't enable ANY networks (ethernet and wifi) with the NetworkManager applet.This started after suspending the laptop. It wouldn't wake up, so I had to make a button shutdown.The "Enable network" checkbox apperars unchecked, but when I click it it doesn't get checked.The interfaces themselves are enabled and working, since the led on the ethernet plug is lit, and I can get a wifi AP list with iwlist scan (but I have to enable the wifi card first with ifconfig up)
Is there a way I can refresh the list of available wireless networks in the network manager applet? It works correctly when I've just booted but doesn't after I resume after suspending. There's just a message like "wireless networks not available".
I can assure you that the wi-fi is not disabled using a button (my laptop doesn't have such a button), "Fn" key combination or in any other way and the network doesn't go down when I need it.
I updated to KDE 4.7 today with MUCH trouble muon hung at towards the end of the updrade at 100% so i had to force quit with " sudo ksysguard" it refused to boot into the desktop so i had to complete the upgrade from the terminal/safe mode when it finished i could not get my wireless to work my drivers is installed properly and i have tried toggling the wireless switch, much to my dismay but nothing seems to work. i can't scan for networks and the network-manager app just reports "WLAN Interface: Error: Invalid state"
My Ubuntu 9.10 (64 bit regular old desktop version) machine has two NICs, eth0 and eth1. eth0 does not connect to my router (and thus the Internet) automatically. I have to manually click on it in the NetworkManager applet after every reboot.
Internet connection sharing has also been impossible. I gave up trying to do that after about 2 weeks. I was simply trying to share my Internet connection with a Windows XP machine over eth1, but it never worked. I could ping one machine from the other, but couldn't get to the Internet from the Win XP machine.
Removing NetworkManager may be the ticket. Most of the tutorials for Internet connection sharing tell you to enter commands in the console. Maybe one of them will work once I remove the NetworkManager applet.
Whenever I start up my laptop i do not get a wireless connection automatically. I have to rightclick network manager applet and select enable networking. After that everything works fine untill i shutdown and restart my laptop. I would like a way to change this so that my wifi connection is working whithout having to click something first..
I have a problem with network manager. I use Ubuntu 10.04 on a Dell Latitude D530. I used to have the same problem with Ubuntu 9.10 before I upgraded. I typically connect to two wireless networks: HOME and WORK. Both networks are set to automatic connection mode. I am at work, I connect to the network WORK. At the end of the day, I just close the lid and go home. At home, I open the lid and have the following problem: network manager still displays the network WORK whereas it is clearly out-of-range and it automatically tries to connect to it. It does so until network manager asks if the password is correct.
If I want to connect to HOME, I have to tell network manager to do so. Then, I receive a notification that I am disconnected to WORK. Next morning, I go to work, and I have the same problem, network manager tries to automatically connect to HOME. What I would expect from network manager: when I am at home, NM automatically connects to HOME and does not display WORK, when I am at work, NM automatically connects to WORK and does not display HOME.
I'm trying to search for more wireless networks but i cannot find a way to make network manager search for more wireless networks. It only displays 2 wireless networks and none of them is mine, even though I've got my wireless router at less than 1 meter from my PC.
A couple of weeks ago my laptop's wifi started acting up, to the point that it didn't function. When I click the nwManager icon to being up a list of available networks, it is empty. If I try to create a new network, with the credentials of my modem, it appears to work, and asks for the password. After I enter the password, it seems to work for about 30 seconds (much longer than normal) but then it prompts me again for the password. This cycle continues indefinitely.
I'm running Karmic on a Dell i1525. how to find out what wireless card I have.
So i installed ubuntu 10.04 on my Hp dv9000 and all went well, then a few days after it asked if i wanted to update to 10.10 so i did and this is where things went kookie.
After i installed i noticed my wifi was all screwy. It would connect but kick me off after several mins of use. I installed WICD hoping that would fix the problem but it didnt. internet work for a few min and then just suddenly cuts out and i have to restart to reconnect because it shows no networks in the manager?
I cant use the option "export" from the VPN settings in the Gnome Network Manager, when I tried to export a popup says "Unknown error"This happend also in 11.3 and now in 11.4, so it is a nm-applet problema I think... Is there any other way to export my VPN connections?
At first I use to have a Network manager applet for my wireless connection in the panel. But somehow it has gone missing from the panel. I am quite puzzle as to how it happen. So I just need to get it back so that I know whether or not it has been connected to my wireless router.
I have been an Ubuntu user for a year or so. My level is still ultra n00b but I am trying. Whenever I update Ubuntu there is always a WiFi problem, always. So now I am having problems getting wifi to work in 10.10. In Network Manager I can view wifi networks fine but I cannot connect. I tried with wicd also but I got as far as "getting ip" and then it would hang up.
lspci
Code:
Code:
Code:
I am not sure what driver I am using as I don't know how to exactly ID my driver. I know there is a way to ID the driver using airodump-ng but I have yet to find it. I have a feeling this is a driver issue as one time I was able to establish a connection that then dropped a few minutes later. I have a feeling I should be disabling/removing the current driver and replacing it with ipw3945 or possibly a driver ndiswrapped? The problem is I cannot figure out how to remove the current driver.
I was going to switch back to 9.04 but I thought I would try to manually figure this one out instead of taking the easy way.
I recently acquired an HP2133 netbook. It comes with SUSE 10 enterprise desktop pre-installed. WI-FI was working fine, though a slight pain for asking for the key every time. I thought I would apply all updates I could find and that may improve my networking.Having applied all I can find the wi-fi is now broken.If I use YaST I can see the Broadcom internal device seems to remain recognised, it even has the configuration I set for my wi-fi network access.The problem seems to be the NetManager applet, which denies all knowledge of wi-fi now and only has wired (which is working).Ironically the update causing the failure was applied wirelessly.I am slightly at a loss how best to proceed - I was going to cut my losses and make another boot partition with Ubuntu, but the live CD I made failed to run so that I could make a flash boot version, I shall have to return to that.
I have also now discovered that SUSE 10 is a bit long in the tooth - I sort of assumed it was current, given I bought the machine recently. So I'm wondering if it would be best to take the hit and reformat completely? I know it is broadcom, so should not be a problem, and I have been through ndiswrapper and the like in the past, though somehow I seem to have forgotten all about it now!I was happy enough with the SUSE setup and this is highly annoying as I was only updating to fix an annoyance and now the wifi has been broken... Perhaps there is an alternative applet to the netmanager that may play with the card and allow me to connect to networks?I look forward to recommendations, at this time my primary objective is to restore wifi functionality, longer term perhaps I need to review distro and installation, but I should like to do that on a dual boot basis I think
I'm not sure if I have two seperate issues or one inter-related issue. The Network Manager applet wasn't appearing in the tray, found out it wasn't installed. Installed, still didn't appear. Tried installing WiCd, WiCd did appear but couldn't find any networks. I had installed restricted drivers previous, decided it was worth another look. Found that Broadcom STA Wireless Driver wasn't installed. Tried to install, it said it couldn't and said I should review the var/log/jockey which is....excessively long.
The network manager applet has disappeared from my top panel so now I cannot see what local wireless networks are available. I just came from the library and was unable to connect to their wi-fi because the computer wasn't trying to detect it. All I have is a network connections applet that seems fairly useless as it just gives me info on networks I've used in the past and not on any currently available networks.How do I get this Network Manager back and functioning?
