OpenSUSE :: VMWare Using Unity Mode With Twinview Using Nvida Drivers
Dec 17, 2010
I am posting this to see if anyone else has had an issue with Vmware Workstation 7.1 using unity mode with a Linux Host. The issue I am having is when I try to move a window from my virtual machine in unity mode the screen crashes and then disappears. Everything seems to work while not in unity mode. I have tried various thing like disabling 3d mode in VMware, disabling various KDE effects. I only have these problems with a dual monitor setup, if I switch to a single monitor everything works just fine.
[Code]....
View 1 Replies
ADVERTISEMENT
May 3, 2010
how can i manually install NVIDIA drivers for kubuntu? my computer that has the kubuntu OS is not connected to the web.
View 4 Replies
View Related
Jan 11, 2010
I just switched from xp on a HP s7613w (gforce 6150 le) to ubuntu 9-10. I can not see anything over 800x600 to select unless i enable the nvida drivers. There are three choices and i have tried them all, After i activate them it will let me select the 1024x768 that i need but the screen is garbled. There will be garbled text till i run the curser over the text then it will stratin up. The buttons on a page will move down and to the right a little bit when i put the cursor over them. When i uninstall the nvida drivers everything goes back to 800x600 and the screen is fine. My monitor is a Sceptre X20 is that helps. I am new to linux so please use easy to follow instructions if you can help me. I tried pc linux and it did the same thing. I like this version better so i am going to try to get it to work.
View 7 Replies
View Related
Jun 10, 2011
There are several things going on here. * Mouse jumps to the side when I click on things when zoom is activated. * After an upgrade in Lucid,I'd start up the computer and everything would be very slow. Windows would open from the bottom and I could not click on anything cause when I tried,the mouse would jump to the side. Zoom slow and clunky. Mouse fireball always turned off. I'd uninstall and reinstall Compiz and that would fix it for about three days and then it's back to the same problems. I end up having to click no effects then click effects (middle button) and it looks for drivers,then I have to reactivate the mouse fireball. This happened every day,day in day out. So I installed Meerkat Sat. and it was fine till this morning,now the same problem has reasserted itself.What can I do? Do I need a new video card?
width: 32 bits
capabilities: smbios-2.3 dmi-2.3
configuration: boot=normal chassis=desktop
uuid=00000000-0000-0000-FB6B-0000751A8F2F
*-core
description: Motherboard
[Code]...
View 2 Replies
View Related
Nov 1, 2010
I am using vmware and virtualbox for experimenting with different linux distros and for using windows... When I switch to full screen, the upper portion(about 50px from top) of system becomes unusable because I am not able to click with my mouse anywhere there. So ubuntu's top panel becomes unaccesible and for vmware, once it becomes full screen I am not able to minimize/restore/close it.
In full screen mode, looking at the mouse cursor, it seems to be controlled by guest system when in full screen but as soon as I move it to top of the screen, the host machine takes control of it and then I cannot access any top panels or vmware toolbar. Is there any solution to this problem... Please let me know if more information is needed from my side.I am using opensuse 11.3, KDE4.4.4, vmware 3.1.2/virtualbox 3.2.10. The problem is for both vmware and virtualbox.
View 4 Replies
View Related
Feb 11, 2010
I have installed VMWare server 2 on a windows XP host. Then I installed Suse 11.2 on the VMWare server. For the most part everything seems to be working Ok. However, the key board will type two letters with every keystroke. I have used the the accessibility options to force a hack fix (slow keys). Also, the host pointer looses synchronization with the guest. Simple fix, running it off the screen forces VM to synchronize.
I have managed to find work around solutions, but overall it is annoying and effects my productivity (IE Ctrl+C takes about 2 seconds to register!!!). I would like to find better solutions. So I am looking for advice on how I could address these issues, I need advice on two methods:
1) Assuming the problems are within Linux, I will need to tweak/change the drivers for my mouse and keyboard, how would I do that?
2) Assuming the problem is with VMWare Tools, I will need to tweak/update the tools. Now, I have noticed that Suse has their own custom setup for the tools. Thus the documentation for tweaking the tools doesn't apply (ie cannot find vmware-tools-config.pl). So how would I go about playing with that side of things?
3) Ruled out the problem being with VMWare itself. Whenever I run the system in command line mode, or in the graphical installer, the keyboard works fine. It is only within KDE that the problems arise. Thus it is either X-Windows/KDE or the VMWare tools layer that is causing the problem. So my next question, is there a way of turning components off and on to narrow in on what component is causing the problem?
View 1 Replies
View Related
Jan 15, 2011
I've installed fglrx drivers with 1click install on openSuse11.3. If I try to boot in "normal mode" I end up in black screen. However if I boot in safe mode, then login and startx, everything works ok
Code:
~> fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: ATI Mobility Radeon HD 4300 Series
OpenGL version string: 3.3.10151 Compatibility Profile Context
Shows fglrx works OK, as well as overall performance is pretty good.
I've done
Code:
aticonfig --initial
radeon drivers is also blacklisted
but running (if it means something)
Code:
# depmod -a; lsmod | grep radeon
radeon 868858 0
ttm 64561 1 radeon
drm_kms_helper 32944 1 radeon
drm 221516 3 radeon,ttm,drm_kms_helper
i2c_algo_bit 6728 1 radeon
View 4 Replies
View Related
Jan 14, 2011
I installed ubuntu 11.04 64-bit version in vmware workstation 7.1
When I use VMware's unity mode, no windows from ubuntu are shown, is this a known issue?
View 8 Replies
View Related
Dec 17, 2010
I was wondering if the "Unity" function of VMware Player will work with Ubuntu 10.10 as the host OS and Windows XP as the guest OS.
I would simply just try it out myself but I am at work right now and I am too impatient to wait until I get home to try it.
View 2 Replies
View Related
Feb 24, 2011
I'm running the latest versions of openSUSE and KDE with latest updates installed. I have an nVidia GTS 250 video card with two monitors hooked up. Initially SUSE recognized my second monitor just fine. However, after installing nVidia's own driver (to quiet the loud noise of the card's fan on high) following these instructions, my monitor is only usable after I go into the nVidia X Server Settings (from terminal, as root: "nvidia-settings") and configure it to TwinView.
All is well and good (I can move windows over to monitor 2), except that monitor 2 has no wallpaper (I'm new to KDE, does this mean that monitor has no desktop activity?) and the X Server configuration is not persistent. When I reboot I have to change the X Server settings back to get monitor 2 recognized again.
I tried looking for the X Server configuration file (xorg.conf, right?), in order to replace it with the edited version, but could not find it.
View 2 Replies
View Related
Feb 23, 2011
Installed Debian 6 (latest stable, downloaded today) i386 under VMWare 7.1. Installed VMWare tools. However, when i activate Unity my mouse won't work at all in guest OS windows, it will only work as if i was pointing to guest desktop. It is all ok in Workstation window.
Unfortunately, there is no xorg.conf, and when i attempt to re-create it using Xorg -configure, the resulting file is unusable, i.e. system freezes when i test it (using X -config /root/xorg.conf.new) and if i just cp into /etc/X11/ GDM fails to load, and manually typing startX in command prompt i get "fatal error no screens detected".
View 2 Replies
View Related
Apr 29, 2011
I'm trying to test out Natty to see if I want to run with Unity. I'm not interested in wiping my production machine just to play with it. So this will be a VM install only for now.
So far, not a single alpha or beta nor even the final allows me to run unity. My hardware is perfectly capable (allegedly) of running Unity. The machine is only 6 months old.
I tried the Unity test script in Natty, and it tells me "no" but it also is telling me the wrong video card info. (apparently it is reading virtual hardware, not the real thing)
So how do I get VMWare Player to report or use my actual hardware, or for Natty to "see" the real card? Is this possible? If not, how in the world does ANYONE test Unity without actually installing it on a gamble? (note, a liveCD won't work because with an nVidia card, I have to install proprietary drivers which require a restart - Chicken, meet Egg.)
View 5 Replies
View Related
Mar 17, 2011
Is it possible to install Snow Leopard 10.6.6 VMware AMD edition (which I downloaded) on VMware linux? It is under Windows 7 so I just need to know if everything of VMware linux (like Hardware Virtualization) is the same under linux as for Windows.
View 1 Replies
View Related
May 2, 2011
I wanted to try the new Ubuntu and see if all works for me and if I like it, but booting it in live mode drops me straight to the regular Gnome 2 interface, no Unity, no common menu, nothing. Is this expected or did something go wrong?
View 4 Replies
View Related
Feb 22, 2011
I am using a virtual pc software called VMWare workstation ver 7.1. platform win 7. I installed a redhat linux 5 in vmware. I am able to access graphical mode but unable to access the console mode (ctrl+alt+f1....f6).
View 4 Replies
View Related
Jun 25, 2010
I just installed Ubuntu 10.04 64bit Desktop on my Vostro 1400 and I'm wondering what I have to do to be able to have 3D acceleration under VMWare (ie. be able to enable Aero under a Windows 7 guest).
VMWare has a popup saying "This computer does not have a 3D graphics system supported by VMware Player." How do I check what driver Ubuntu uses for the X3100? What driver would enable 3D?
View 1 Replies
View Related
Dec 29, 2010
Tried to test the 10.10 Netbook's Unity but after keying the password I got a "Unity missing driver" without any identification of the driver. Is it available in the repositories? How can I identify it to install it? Why isn't it included?
View 5 Replies
View Related
Jan 10, 2011
I have maverick currently installed on my MacBook 2,1 (mid-2007 model) and I decided to get myself an iso of the natty alpha 1 to run in a VM. When I booted into it, it said I couldn't run unity because I didn't have the required drivers. I kinda expected that (it's a pretty old computer, though it runs fast), but I'd like to know where I could maybe get a supported driver for this model of Macbook.
View 8 Replies
View Related
Apr 30, 2011
I've just installed the brand new Ubuntu 11.04 and all goes well until...I log in a session. There is a window telling me that my graphic card isn't too good to run Unity, when I have no problem under 10.10 to run all the eye-candy. Now I have a NVIDIA Quadro NVS 120M with 512 megs of memory. I've install the NVIDIA current driver in the Additional Drivers application and reboot. But nothing...in the additional driver app it says that the current driver is installed but not currently in use...what should I do before giving up and install unity-2d?
View 2 Replies
View Related
May 2, 2011
Is there any way when booting the LiveCD of Ubuntu 11.04 to force the use of classic mode, even if the computer meets the requirements to use Unity and would otherwise start Unity? Is there a kernel parameter that would do this? In searching, all I can find is the selection during login, but this seems to only show up after a full installation, I want to do this in the Live CD environment.
View 8 Replies
View Related
Jun 13, 2010
As some people may have seen in my previous thread, I was trying to get X (or XFree86) working in VMware. Right now, I'm in Debian Woody, with startx failing on me yet again. I thought I had everything setup ok, but alas, it seems like I do not.
When I try to mount the cdrom drive and install vmware tools, it get errors listed in picture 1. (Also attached is my boot log, hopefully that can help. Please see boot.txt)
Now, back on topic, I have attached XF86's log. As usual, the error is near the end of the file. I think the root cause of x not starting is this symbol issue, although I really don't know for sure. It seems like startx sort of works, since when I try it, vmware resizes the window as if the proper resolution had been entered, and it was about to start drawing the desktop, but then it goes back to the normal terminal resolution, at the command line.
I recommend that you view these files with any text viewer but windows Notepad, since it can't seem to understand return characters.
View 3 Replies
View Related
Jan 15, 2011
I have installed the most basic Arch Linux only with command line interface as guest OS on Windows using VMware. The problem is when I maximize the Vmware window, the Arch Linux console does not adjust to the full screen. How to do this without installing X window?
I also want to make copy-paste work to and fro from windows without installing X. Is it possible?
View 1 Replies
View Related
Jun 7, 2011
This is probably very simple but can someone tell me how I stop Unity in order to install graphics drivers?
View 2 Replies
View Related
Aug 16, 2010
I have noticed kernel.org with kernel releases on the mainline.Example: 2.6.36-rc1 is currently on the mainline. What does it mean? Does it mean that feature changes been freezed.Does it mean "2.6.36-rc1 Released". I have job to verify vmware drivers to test the version information, Can I test it now through compiling for vmware drivers now. Lots of Git activity goes on after kernel comes on mainline. Does it mean our vmware drivers can only be tested after kernel if finally announced
View 4 Replies
View Related
May 22, 2010
my mate "polish dave" came round and hooked his laptop to my network 02wireless with WEP enc, using backtrack he had my password within 15mins.. now i want to copy him and see just how easy it is my 'acer aspire one' comes with a built in atheros ar5b95 wireless (useless) that i cant get backtrack to find.. i bought a tplink usb and now i cant get that to show up either.
View 4 Replies
View Related
Sep 21, 2010
im running suse 11.3_x64 clean install along side with Win7 Pro _x64 had a big fight installing Vbox 3.2.8 PUEL edition but i need to test some VMWare products like 'VMWare vShpere (ESXi 4..0.1 - which i couldn't install in a vm in Vbox) ' before putting it in production enviroment in some of my clients. version: VMware-Workstation-Full-7.0.0-203739.x86_64 The installation of vmware was quite simple with no errors. the problem kicks in after the first reboot when i try to run it. before installing vmware i installed the following:
[Code]..
When i try to run vmware workstation the 1st error kicks in: Before you can run vmware, several modules must be compiled and loaded into the running kernel:
[Code]...
View 9 Replies
View Related
Jan 2, 2010
I played with the graphics in kde4 and seem to have losy my installation. i have tried the rescue system option, recover system options and in desperation (i was just about to reinstall) tried booting in failsafe mode, and it worked!
where do i go to find out what the problem is regarding the normal boot mode? i think my pc is starting to resent the continual use of the reset button!
View 6 Replies
View Related
Aug 1, 2010
I have an encrypted file system and recently installed proprietary ATI drivers for my graphics card. The moment I did that, Ubuntu boots with a black screen. Now I'm attempting to get back into the OS to remove the drivers, but when I choose Ubuntu Recovery Mode from the grub boot screen, it shows some dmesg output and then the screen goes black. Whats interesting is it doesn't even ask me to decrypt the hard drive (like it normally does). how I can get back into the OS to remove the drivers?
View 4 Replies
View Related
May 1, 2011
I have installed and removed the Nvidia Drivers via System>Admin>Additional drivers. The dialog tells me that the Current driver is Activated but no in use. I can't seem to find the way to get the driver in use.I'm running 11.04.
View 6 Replies
View Related
Feb 20, 2010
found this in my boot log nvidia.ko for kernel 2.6.31.12-174.2.22.fc12.x86_64 was not found. and the driver is disabled and X is not working correctly. I tried removing the driver "yum remove kmod-nvidia "
then re-installing and rebooting. same issue I went to the fusion site and followed there install guide again same issue. made sure the free driver is blacklisted in grub.conf kernel lines
View 2 Replies
View Related
