OpenSUSE Install :: VMWare - Tweak / Change The Drivers For Mouse And Keyboard
Feb 11, 2010
I have installed VMWare server 2 on a windows XP host. Then I installed Suse 11.2 on the VMWare server. For the most part everything seems to be working Ok. However, the key board will type two letters with every keystroke. I have used the the accessibility options to force a hack fix (slow keys). Also, the host pointer looses synchronization with the guest. Simple fix, running it off the screen forces VM to synchronize.
I have managed to find work around solutions, but overall it is annoying and effects my productivity (IE Ctrl+C takes about 2 seconds to register!!!). I would like to find better solutions. So I am looking for advice on how I could address these issues, I need advice on two methods:
1) Assuming the problems are within Linux, I will need to tweak/change the drivers for my mouse and keyboard, how would I do that?
2) Assuming the problem is with VMWare Tools, I will need to tweak/update the tools. Now, I have noticed that Suse has their own custom setup for the tools. Thus the documentation for tweaking the tools doesn't apply (ie cannot find vmware-tools-config.pl). So how would I go about playing with that side of things?
3) Ruled out the problem being with VMWare itself. Whenever I run the system in command line mode, or in the graphical installer, the keyboard works fine. It is only within KDE that the problems arise. Thus it is either X-Windows/KDE or the VMWare tools layer that is causing the problem. So my next question, is there a way of turning components off and on to narrow in on what component is causing the problem?
View 1 Replies
ADVERTISEMENT
Jan 10, 2010
I have a weird situation. After installing openSUSE 11.2 on a machine it has no response to the keyboard and mouse. I then installed Mandriva 2010 on the machine and the keyboard and mouse work.
View 7 Replies
View Related
Nov 12, 2009
I just installed the new OpenSuSE 11.2 release and after coming up in graphical mode the keyboard and mouse are not responding at all.
After that via a remote login force the machine back to runlevel 3 and this makes it able to login to the console and trying to start sax2 to make a new X configuration.
Well it doesn't read the old configuration but gets stuck as well.
The install was an update from OpenSuSE 11.1.
View 9 Replies
View Related
Dec 20, 2009
I am quite experienced in installing openSUSE. (I used it for many years.) But the problem showed below tricks me out.
I just tried to install openSUSE 11.2. In initmode 3 the keyboard works well. Everything worked well up to the moment I started runlevel 5. In XWindows Modus, the keyboard and the mouse are disabled. And I cannot get back to any other Virtual console.
When I started sax2, I get something (in the file /var/log/Sax.log) or both mouse and keyboard like this:
It indicates , mouse and keyboard are disabled.
Here are my questions:
How can I ENABLE my keyboard and my mouse?
Where is the file that configures sax2?
Do I have to set ("on") the AutoAddDevices? or to "off"
View 4 Replies
View Related
Dec 27, 2009
I have just update from 11.1 to 11.2 and after reboot system hangs when arrives to the screen where all users logins are showed. I run the installation again in repair mode. Everything correct. Started system again in Level 3, login as one of the users and run startx. It starts the desktop but no keyboard or mouse is working. Started system again in level 3, login as root, started gdm and same results. It arrives to the login screen for the different users and keyboard and mouse does not work. System seems to be running as clock in the right down works.
Started system again in Level 3, login as root, run SaX2 and same results: no keyboard no mouse. I am running gnome desktop with last image downloaded openSUSE-11.2-DVD-i586.iso. it seems to be something related to bug in OpenSuse 11.2 Milestone 7: (Bugs:Most Annoying Bugs 11.2 dev - openSUSE) HAL may crash, leaving XOrg without keyboard and mouse (Bug #537452), work-around: update with 'hal' package from Base:System
View 6 Replies
View Related
Feb 5, 2010
On our SuSe 11.1 PC keyboard and mouse are no more responding although it did work properly until yesterday. We shut down the computer yesterday evening and today they do not work anymore. But it is not a hardware problem, we can use keyboard and mouse until Grub bootloader, but as soon as we start a Linux session (doesn't matter if normal or failsave mode) the keyboard and mouse are disabled, we can see that because the NumLock and CapsLock LEDs are switched off immediately.
We have no idea what happened. We booted from CD into rescue mode and mounted the hard disk manually and checked some logfiles, but the boot.log tells us that USB keyboard and mouse are detected, as well as the Xorg.0.log file. And we found no indication that keyboard or mouse are disabled or something like that.
View 1 Replies
View Related
Sep 12, 2010
Today I installed openSUSE 11.3. I finished downloading updates, and restarted. I can get through the grub menu fine, but after that my keyboard and mouse fail to respond. On my windows partition(which is where I'm writing this) my keyboard and mouse work fine. If it matters, they are the Logitech Wireless EX100 keyboard and mouse set.
View 5 Replies
View Related
Mar 7, 2010
I recently installed suse 11.2 on my system and during the install the keyboard (Microsoft internet keyboard PS/2) and mouse (Microsoft optical mouse USB with scroll wheel) worked perfectly, but once I reached the login screen they both became unusable.
I also tried rebooting into failsafe mode but once reaching the login screen the same happened again, the only key that seems to work is the 'F Lock' key and the optical light appears on the mouse.
View 1 Replies
View Related
Jun 3, 2010
I had a normal OpenSuse 11.1 setup, along with Windows XP, swap partition and /home partition. After my hd began failing (badblocks), I cloned the system to a different location (using ddrescue), updated the hd with a new one (bigger), made new partitions on the new hd (preserving the old locations, ex: /dev/sda1 ext3 on old hd still is /dev/sda1 on new one, but made changes to the partitions sizes to make them bigger), recovered all the clones to the new hd, fsck'ed them, recovered grub with install dvd then tried to boot.
On the first boot, it failed to mount / (/dev/sda1) and gave me a command line. I checked /etc/fstab and saw that, on the old setup, it was mounting the partitions based on the HD-id, which obviously changed. I fixed that to use /dev/sda1, /dev/sda2, etc. Now, the systems boots fine. But, when I get to the graphical login part, the keyboard and the mouse don't work. It's a Dell Inspiron 1525 notebook, now with a 320gb samsung hd.
View 6 Replies
View Related
Mar 9, 2010
I tried running Ubuntu Linux 9.10 on my computer directly from the CD, without installing, and when it had finished loading neither the keyboard nor the mouse would work. I got a message saying that restricted drivers had been blocked. I can't press what I think to be the unblock command because both the keyboard and mouse had been blocked.
View 2 Replies
View Related
Mar 4, 2010
I just bought a Fujitsu Esprimo P1500 computer with Windows 7 Home Premium. When I try to install OpenSuse 11.2, the keyboard works in the first screen, so I can select "Installation" with the arrow keys. But when the next screen comes up (select keyboard etc.), neither keyboard nor mouse work. Well, the CapsLock and NumLock LEDs light up, but that is all (and hitting the corresponding keys does not turn them off.)
View 6 Replies
View Related
Jul 14, 2010
Was running out of room on / and set in Yast to delete /tmp on startup. Also deleted /var/log and /var/tmp while logged in. Rebooted and now mouse and keyboard (both USB) not working. Keyboard works on grub menu. Also works now in XP. Tried reconnecting (sync & plug unplug) different usb ports and nothing. Gave it a few minutes on startup and still nothing. Plugged in a PS2 keyboard and the lights just blink after startup and it will not work either.
View 7 Replies
View Related
Jul 9, 2011
I know that in previous versions of OpenSuSE one could be in front of the screen/KBD/mouse get things started, and log into another session and get things started there and run some apps, and so on. Now with OpenSuSE 11.x I see no means in which to do so. Is there another way? Point being is that I want to run one application as one user session and another application in yet another user session. Either one I can get to by switching user accounts at one screen/kbd/mouse. Or through VNC. No need to run something like xen or VMWare and incur additional overhead. (It is next on my list to try though.
View 2 Replies
View Related
Apr 6, 2010
I just installed the ATI Catalyst drivers for my Radeon HD3200, and upon reboot my mouse has disappeared. I can still use it, it's just that there's no pointer on the screen. In addition, moving windows and loading/scrolling any window is very, very slow.I also noticed there's no entry for the mouse in xorg.confI have run aticonfig --intial and aticonfig --initial -f, to no avail.
View 9 Replies
View Related
May 1, 2010
Which configuration options would I need to select to build the correct drivers/modules for my usb mouse and ps/2 keyboard? The mouse is a Microsoft 1.1A Optical (Compatible with USB or PS/2 but plugged into usb port) and the keyboard is just a no name chinese one. BTW i am running Gentoo and linux 2.6.32-gentoo-rc7
View 4 Replies
View Related
Oct 15, 2010
I was working on something important in 11.2 and did a "zypper up" in the terminal in the background. I wasn't paying that much attention to it, I believe it was an update to 11.3. After returning to the computer after about one hour the windows were behaving strangely and the machine wasn't very responsive. I decided to reboot. Now at login I have neither mouse nor keyboard. I have switched the keyboard to PS2 model, no difference. If someone could help me with booting to run level 3 from the grub menu perhaps I could change some settings there to make everything work. I really regret doing the update. It would be very important for me to be able to get back in to machine with spending as little time as possible on this. Could I reverse the update? This machine is very important for me and my family for their daily communication, but currently I have very little time to fix this. My quick fix was to install Kubuntu 10.10 so I could resume working, but I would really need to get back in to 11.2.
View 9 Replies
View Related
Dec 30, 2009
similar issue to Keyboard and mouse deactivated while installing - openSUSE ForumsI am installing from OpenSuse Linux 11.2 DVD. After I hit install, the screen with keyboard layout choice comes up, but neither my mouse nor my keyboard work on that screen (they did work until that screen)I have Vista and Win7 installed on separate partitions. My keyboard is a logitech S520 and mouse LX5, both wireless, connected to a USB portI did try to connect a wired keyboard and mouse over USB (front ports), did not work.
View 9 Replies
View Related
Oct 22, 2010
when i change my volume via the buttons on my keyboard, my left click on my mouse just stops working, then i have to restart my computer to get it to work again. anyone now a fix or a workaround for this?
View 3 Replies
View Related
Mar 17, 2011
Is it possible to install Snow Leopard 10.6.6 VMware AMD edition (which I downloaded) on VMware linux? It is under Windows 7 so I just need to know if everything of VMware linux (like Hardware Virtualization) is the same under linux as for Windows.
View 1 Replies
View Related
Sep 1, 2011
When I run as a VMWare Player guest (Win7 host), I sometimes lose keystrokes (several times a minute) or have repeat keys like thissssssssssssssssss (not as often).This doesn't happen with WinXP guest on the same VMWare installation, or Suse running outside VMWare on the sam hardware, so I suspect the combination of Suse guest + VMWare Win7 host.
View 1 Replies
View Related
Aug 2, 2010
My mouse stops working under vmware I have ESXi 4.0. Reboot or (Ctrl) (Alt) (Backspace) fixes the issue. I'm seeing the same thing in OpenSuSE 11.3 running on ESX 3.5. Using the open-vmware-tools as part of the OpenSuSE install. Odd thing is that I have (3) 11.3 machines, 1 has never shown this behavior, I seems to have gotten another to stop by changing the KDE Activity setting Type to "Plain Desktop", and 1 that for the life of me I can't get it to stop.
The first one has been upgraded from 11.1 -> 11.2 -> 11.3. The second was 11.2 -> 11.3, and the third is a fresh install of 11.3. I'm able to fix it for a limited time by logging out or restarting X with Cntrl+Alt+Backspace. I've tried restarting the vmware tools without luck. I'm wondering if it is an Xorg bug.
View 2 Replies
View Related
Jan 31, 2011
I have a problem with Maverick. Whenever I change my volume or brightness from the keyboard, as soon as the indicator goes down, my mouse automatically switches to drag mode. I have to switch to open terminal by keyboard shortcuts and reboot
View 2 Replies
View Related
Dec 17, 2010
I am posting this to see if anyone else has had an issue with Vmware Workstation 7.1 using unity mode with a Linux Host. The issue I am having is when I try to move a window from my virtual machine in unity mode the screen crashes and then disappears. Everything seems to work while not in unity mode. I have tried various thing like disabling 3d mode in VMware, disabling various KDE effects. I only have these problems with a dual monitor setup, if I switch to a single monitor everything works just fine.
[Code]....
View 1 Replies
View Related
Sep 5, 2011
I have downloaded the latest Ubuntu.iso and extracted it to /tmp/ubuntu/ on my laptop. In the folder isolinux there is an isolinux.cfg file. I am trying to prepare a USB stick by modifying those files, so that when I boot from USB it opens VNC and puts a static IP of 192.168.1.125. How can I enable VNC and a static IP so that from my laptop I can do the installation of Ubuntu 11.04 without using a keyboard or mouse?[URL]..
View 1 Replies
View Related
Aug 11, 2010
I want to make use of extra buttons on my Logitech RX1000 mouse.
For e.g. the zoom button I would like it to show windows on my desktop (ctrl+F9).
I've fired up xev and found out that this is button 8:
Code:
Then I've added to ~/.xbindkeysrc:
Code:
But that doesn't work at all.
View 2 Replies
View Related
Aug 24, 2011
I'm running suse 11.4 64bit and flash 11.0.1.60 My problem is that when I'm running flash if I give some keyboard input then my mouse (and only my mouse from what I can tell) will freeze for a second or so. This is most annoying when I'm goofing off playing a flash game that requires both keyboard and mouse inputs, since if I use the keyboard for anything I can't use the mouse for a second or so.I've tried searching the forums but I can't seem to find anything on this topic.
View 3 Replies
View Related
May 8, 2011
I have a recently installed version of opensuse 11.4 and I am unable to use the keyboard and the mouse at the same time. Whenever I type on the keyboard my mouse will become frozen for about 2 seconds and then will work as normal. It will happen with any key press. This problem became very apparent when trying to play first person shooters. I cannot move with the keyboard and look around with the mouse at the same time
View 1 Replies
View Related
Jan 6, 2010
I'm about to add a wireless mouse and keyboard to the computer (running opensuse 11.2). Do I just plug them in? Do I have to load any driversDo I keep my wired keyboard/mouse plugged in at first?
View 2 Replies
View Related
Jan 26, 2010
I just upgraded (via backup and install) from 11.1 to 11.2. SaX2 was perfect for configuring my IBM SpaceSaver (Trackpoint) USB keyboard, and my Logitech Marble Mouse. Now that SaX2 doesn't have the keyboard or mouse, eh... modules?, I don't know how I can configure them the way I'd like.
What now? I'd rather not have to use the on-screen keyboard every time I start up openSUSE to turn off NumLock... Do I have to manually edit /etc/xorg.conf now?
View 5 Replies
View Related
Mar 8, 2010
I have a wireless keyboard with touchpad However the position of the mouse buttons is very unconfortable and so I would like to remap the mouse button to some kes on the keyboard.
I would like to use the media keys which are present on the keyboard. They are useless to me since most of the programs that I use have their own keyboard shortcuts for controls such as play, stop etc.
I mapped the keys using xev, and for instance I found that the "play" key mapped to keycode 172
by trying someting like
xmodmap -e "keycode 172 = Pointer_Button1"
nothing happens.
View 2 Replies
View Related
