OpenSUSE Hardware :: Twinview Second Monitor No Wallpaper?
Feb 24, 2011
I'm running the latest versions of openSUSE and KDE with latest updates installed. I have an nVidia GTS 250 video card with two monitors hooked up. Initially SUSE recognized my second monitor just fine. However, after installing nVidia's own driver (to quiet the loud noise of the card's fan on high) following these instructions, my monitor is only usable after I go into the nVidia X Server Settings (from terminal, as root: "nvidia-settings") and configure it to TwinView.
All is well and good (I can move windows over to monitor 2), except that monitor 2 has no wallpaper (I'm new to KDE, does this mean that monitor has no desktop activity?) and the X Server configuration is not persistent. When I reboot I have to change the X Server settings back to get monitor 2 recognized again.
I tried looking for the X Server configuration file (xorg.conf, right?), in order to replace it with the edited version, but could not find it.
Recently i've installed 10.10 and have a problem with flickering screen on VGA. I have 64-bit release, ge force 210, nvidia propietary drivers and two monitors:
No matter which monitor is attached to VGA, it flickers randomly every couple of minutes. Sometimes it flickers when i use mouse or keyboard, but sometimes it flickers by itself.
I have a dual monitor setup (Twinview), both monitors are connected to my 1xNvidia MSI NX8600GT card...I've been using a 21.6inch HannsG HG216D (herein referred to as HG216D) monitor as my LEFT monitor, and a Dell 1905fp (herein referred to as 1905fp) as my RIGHT monitor.
I recently got rid of the 19inch 1905fp Dell monitor and moved my HG216D to the RIGHT and now I have a new 23inch DELL S2309W (herein referred to as S2309W) on the left. The new S2309W is connected to my computer via DVI cable and is configured Perfectly at it's native 1920x1080 resolution.
However I can't for the life of me get my HG216D back to it's native 1680x1050. The HG216D is connected via VGA cable that is also routed thru a KVM, I realize this means that this monitor can't/won't be auto-configured. However I should be allowed to set it manually right?...
Code:
Won't let me select 1680x1050 for the HG216D resolution, it will only let me select 1440x900 MAX, there is no option for 1680x1050, (See attached: screenshot)
I've tried to manually edit my /etc/X11/xorg.conf, but after hours on end messing with it, I give UP...
Here is my current xorg.conf:
Code:
I am just not sure what I need to change and how to get the second xorg.conf to play nice via a VGA connection?
Is there any way to put a dual monitor wallpaper on a single monitor configuration using desktop wall? Using only 1/3 or so per wall. Something that will have the effect like the scrolling wallpaper feature on Android/iPhone.
I'm trying to use an external monitor to watch movies on my linux box (kubuntu maverick) but it results always out of sync. TV-out refresh rate is locked as you can see on the image i've attached right here. This is the output of the nvidia-settings query about the variable RefreshRate:
Code: Attribute 'RefreshRate' (DeepBlue:0.0; display device: CRT-0): 60.02 Hz. 'RefreshRate' is an integer attribute. 'RefreshRate' is a read-only attribute. 'RefreshRate' is display device specific.
I am posting this to see if anyone else has had an issue with Vmware Workstation 7.1 using unity mode with a Linux Host. The issue I am having is when I try to move a window from my virtual machine in unity mode the screen crashes and then disappears. Everything seems to work while not in unity mode. I have tried various thing like disabling 3d mode in VMware, disabling various KDE effects. I only have these problems with a dual monitor setup, if I switch to a single monitor everything works just fine.
I have been using 10.2 for the longest time. Just did fresh install of 11.3. I can't figure out how to change just the wallpaper. I found out how to change themes, but not just the wallpaper.
I have just installed opensuse 11.2 and am using the gnome desktop environment. I just can't get it to change wallpapers. I select a wallpaper in the list, and nothing happens. I download a wallpaper and add it to the backgrounds. select it. nothing happens. I don't particularly like the default wallpaper and I hate to abandon the whole OS just because of this, but it's irritating.
I've just installed SuSE 11.1, and have so far been able to get my dual monitor setup to play nice. Both monitors are operational, and function fine from an application point of view (3200x1200 res), but KDE refuses to display my wallpaper over both monitors. In fact, I cannot set the wallpaper for my second monitor at all (it's stuck to the default green SuSE wallpaper or a fixed color). As a side effect: widgets also refuse to be moved from one monitor to the next. Applications can be moved fine, even put half on one monitor and half on the other, but the widgets and the wallpaper refuse to cooperate. This worked fine for me with SuSE 10.3.
This is a triple-monitor setup with two video cards, where the mouse pointer gets "stuck" if it tries to cross from one video card to the next one. It worked correctly in openSUSE 11.2 and doesn't work in openSUSE 11.3 with the same xorg.conf. This is a 64-bit openSUSE 11.3 with xorg 7.5-11.3 (the openSUSE prepackaged version). I've already tried NVidia drivers 256.53-16.1 (the openSUSE NVidia repository version) and 260.19.12 (the latest off of the NVidia website).
This is the same xorg.conf that I used successfully in openSUSE 11.2. I tried a new automatically generated xorg.conf using nvidia-settings and it had the same problem. This forum won't let me upload the relevant files, but here: [URL] is a tar-ball with my xorg.conf, Xorg.*.log, /var/log/messages, and the NVidia debugging output.
just setup suse 11.3 , put on the Nvidia 19.29-22.1 drivers via yast , no kms is set in inetd , nomodeset on grub boot line etc... Even tried installing the driver " the hard way " dual monitors come up, setup xinerama to "Extend" my desktop , and the main monitor ( right side ) is good, visually the left monitor (2ndary) is good.. but whenever I move my mouse over to the left screen the mouse pointer dissapears, flickers along the right hand border of that screen... and if i move the cursor back to the original screen i have to really fight to get it back to the main screen....Copy of my xorg.conf , still very basic...
# nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 260.19.29 (buildmeister@swio-display-x86-rhel47-04. nvidia.com) Wed Dec 8 12:27:27 PST 2010
I have just installed Os 11.3, it is my first time to try Linux. Install went fine have Dual Boot Win7 and openSuse 11.3 KDE I have a 26" TFT TV as Monitor 1 DVI and Dell 16" as Monitor 2 VGA all working fine . Autoconfig started and TV display vanished, install finished and went into display settings to check problem and for some reason it is saying both displays are on my 16" Dell. I will Add Screen Shot to show problem. wanted to switch to Linux for years but never had the guts, i was hoping to learn Linux with this distro and when have a grip on it drop windows and use Linux as Primary.
Just ran into this issue with Suse 11.2. Everytime I try to change the desktop wallpaper, plasma crashes and returns me to the log in screen. This is the first time this has happened and it happens no matter what wallpaper I choose. Desktop effects are OFF. Strange that adding widgets to the desktop does NOT cause this crash, just changing the desktop wallpaper. The computer is using 855GM Intel Chipset.
In my Gnome 2.32.1 running in opensuse 11.4, when I go to select wallpaper for my desktop, one of the options is a space-based slideshow. The files reside in /usr/share/backgrounds/cosmos. When I go there, there are the jpegs with an xml file that seems to controle the slideshow. Is there some kind of utility for creating this xml file? To create one manually, especially with a lot of pics, seems kinda cumbersome.
I am just wondering if anyone else is running into this weird behavior on KDE 4.6. It's on an openSUSE 11.4 installation, 64 bit, on a laptop with 2 monitors. Normally, I have the following desktop/wallpaper/icon combo:Then, when I accidentally click my mouse on the bottom of my panel, I get this very ugly desktop for some reason:Also, when I then right-click in the desktop area to change back the wallpaper, the "Change Desktop Background" option does not work. This only affects the current desktop I am working on, so I end up just moving all my work to a new desktop, but it's awfully annoying. I don't even know where the wallpaper comes from - it's not one of the options in my wallpaper settings
I just installed OpenSUSE 11.4 on a completely blank machine, empty disks, etc. using a Network Install. The install appeared to run OK, but when it rebooted to do the configuration, it hung. I tried a manual reboot a couple of times, then booted in FailSafe mode - came up OK and ran through the auto-config. Now, it still boots up ok in FailSafe, but in normal mode I get the wallpaper on the screen, but it hangs there.
Is it possible to run TwinView with more than 2 monitors.When I try, it seems to recognize the 3rd monitor, but will allow allow them to be configured as separate X screens.
I have a GeForce 7200GS graphics card which I've been running in TwinView mode driving 2 IIyama E431S monitors.
I wish to move up to 3 monitors and acquired a USB to VGA adapter but can't get the new monitor to work. I have followed this [URL] and modified the xorg.conf. See below:
Code: # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 1.0 (buildmeister@builder63) Tue Nov 4 14:07:17 PST 2008 # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 1.0 (buildd@palmer) Mon Nov 3 08:46:46 UTC 2008
I have connected my TV (and my regular screen) to my Ubuntu 9.10. I use TwinView, and that works just fine. I have also installed Moovida (I love that program). And I would like my PC to open Moovida on startup, but I need it to be on the TV screen.
I have no idea what to do to get Twinview to work. I had found a bit of code to paste into the xorg.conf file but after I pasted it in and restarted my computer, but it wouldn't boot up. Whenever I open up the "Monitors" dialog under System>Preferences, it doesn't even see that the second monitor is there! It doesn't matter if I go to the default tool or if I go to nVidia's tool. On the nVidia tool, under X "Server Display Configuration", there is a button "Configure...", when I press it, it asks "How should this display be configured?". The options "Twinview" and "Disabled" are both unselectable and the only one that I can select is "Separate X Screen". It's almost like my computer doesn't know that I have a second monitor plug.
I recently installed Ubuntu 10.10 (32bit) on an HP compaq nc6400 laptop (internal display is 1280x800, graphics card is an Intel Mobile 945GM/GMS, 943/940GML Express) which I am using in three situations: In my office: external monitor (1280x1024), laptop in docking station with lid closed At home/on travel: as it is, without any external monitor When giving lectures: with projector (1024x786), lid open, same output on projector and internal display As you see, I either want one output device only or both showing the same output. Additionally, I want to run compiz. My problem is that, whenever I (1) connect an external display or (2) when I press the Fn+F4 key to change displays or (3) sometimes even when I open/close the laptop's lid, the system at some point switches to TwinView which seems not to work with compiz on my system. The effect is that compiz is deactivated. When I want to have it back, I have to open the appearance settings and change to extra visual effects again. Unfortunately, that reverts compiz to default settings and I have to adjust my compiz settings again. note that compiz works properly in all three situations I listed above. The problem is "only" that, at some point, it switches to TwinView.
Is there a way to tell X or compiz NEVER TO CHANGE TO TWINVIEW?
I am having issues maximizing windows/applications on triple monitor setup. I would like to maximize wine, folder explorer, media players, and etc to one screen, instead of across both, which it is currently doing that. Using Separate X [xinerama] + twinview, but I have also tried without xinerama + twinview. When maximizing applications and such, it will only maximizes across both of the monitors in the twinview setup, not the separate X on the left. The separate x has maximizing working to that one screen. I have tried to add xorg tweets, but that's not working, and they are currently in my xorg post below. I had maximizing to one screen working perfectly with dual monitor setup. :S And, I am currently getting an error about " Xlib: extension "RANDR" missing on display ":0.0""
The following Xorgs show the differences, I guess if there is one between maximizing correctly to one screen.
Triple Monitor setup, maximizing across both twinview monitors, not preferred:
Code: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 260.19.06 (buildd@yellow) Mon Oct 4 15:59:51 UTC 2010 # nvidia-xconfig: X configuration file generated by nvidia-xconfig
I have 32-bit Windows XP and Centos 5.5 x86_64 on my dual-boot PC, equipped with two generic LCD monitors, Dell (primary) and HP (secondary). I have been running dual screen displays without any problem when running Windows, however no luck getting them to work when I boot up with my newly installed Centos 5.5
In both Gnome and KDE both monitors light up, but secondary monitor (HP) is just a clone of the primary. I have tried setting "Dual Head" in the Display adminitrator but the resulting xorg.conf causes a "Entity is already in use" error and crashes. I have also tried just adding Option "TwinView" "on" but it does nothing. (Are "Dual Head" and "Twin View" exactly the same concept?)
What I am doing wrong? I checked the FAQ and did not find any similar problems being discussed.
Below is my getinfo.sh driver info
== BEGIN uname -rmi == 2.6.18-194.3.1.el5.centos.plusxen x86_64 x86_64 == END uname -rmi == == BEGIN rpm -q centos-release ==
Im running a dual monitor setup in gnome, with the closed nvidia drivers in twinview mode. most of the times i want to be able to maximize windows to a single monitor (this is the default behavior in 10.04 lucid i believe), but sometimes i want to span a window on both screens. compiz doesn't allow windows to resized past screenborders, and gdevilspie wasn't able to get past this.
After a lot of googling and toying around i came up with the following sollution, i'm posting it here so other people can enjoy it as well (and i'll be able to find it again after my next install).
I made a script to switch between the streched mode and the doublescreen mode to use it, you'll have to stop the autodetection of the outputs in compiz. this option is found in compiz config settings manager under general settings > display settings or though the gconf-editor in /apps/compiz/general/screen0/options/detect_outputs
This script switches between the two modes, but you need to edit the resolutions of your monitors! (i have a double 1280x1024 setup)
Code:
My way of using this: 1. use the script to switch to the span mode 2. start photo/video edit software 3. work 4. close the software 5. use the script to switch back
i have some issues running twinview through my laptop and an additional monitor. i currently have the nvidia settings such that the monitor is the primary screen. however, whenever i click full screen in videos or another application, it maximizes in my laptop screen. also - when i maximize videos videos, the screen fills up, but the actual video size doesn't tend to increase (it doesn't stretch to fit). is this an adobe problem? ubuntu 10.04, nvidia driver v195, dell latitude d630 laptop.
I have 2 nvidia graphics cards and 3 monitors. One graphicss card is an nvidia 460 and the second one is an nvidia 8400 GS. I'm on Ubuntu lucid 64 bit gnome desktop. I use the nvidia drivers . 2 monitors are connected to the 460 card setup as twinview the last monitor is connected to the 8400 GS set as a separate xscreen.
When I now maximize a window on the 2 monitors which are set as twin view it expands this window gets stretched over both screens. I would like to know how I can set it so that an maximized window get only expands on the current screen in twinview so that I can still move windows from 1 screen to another.
