my mate "polish dave" came round and hooked his laptop to my network 02wireless with WEP enc, using backtrack he had my password within 15mins.. now i want to copy him and see just how easy it is my 'acer aspire one' comes with a built in atheros ar5b95 wireless (useless) that i cant get backtrack to find.. i bought a tplink usb and now i cant get that to show up either.
View 4 RepliesIntel wifi link 5100 not found on sony vaio backtrack 4 vmware I use vmware to load backtrack I have a sony vaio with 5100 AGN wifi card installed in it. I had tried anything to make my wifi work but always show no interface no wireless. I googled it for help for weeks and all i get was download the iwlwifi things and i already installed in it. i even tried many other thing
/etc/init.d/wicd start
/etc/init.d/networking start
and everytime i type ifconfig it just show eth and lo and no wlan0 in it everytime i type airmon-ng there are no chipset interface and ...........thing (forgot) I could find my wireless card name when i type ilg... something i forgot The problem is,i think my linux doesn't reconize the card even i have installed the driver Anything that i can do to make my linux reconize wifi link 5100 agn wireless card?
WiFi adapter TP LINK WN821N is not working in 10.10, WN821N is notworking.
[Code]....
I'm running Kernel 3.0 and i cannot use my TP-Link TL-WN821N v2. # lsusb Bus 001 Device 003: ID 0cf3:1002 Atheros Communications, Inc. TP-Link TL-WN821N v2 [Atheros AR9001U-(2)NG]
[Code]....
ifconfig wlan0 up doesn't work. With kernel 2.6.39 I can use it.
I'm trying to install the drivers for my Wlan card, I've downloaded the drivers in the tar.gz-file from Broadcom and untar-ed it in my /home/<username>/hybrid_wl-folder and cd'ed to it and I try to run "make" but I get an error: KBUILD_NOPEDANTIC=1 make -C /lib/modules/'uname -r' /build M='pwd' make: *** /lib/modules*2.6.31.5-0.1-default/build: No such file or directory. Stop make: *** [all] Error 2
I'm getting really desperate, I need my Wlan on Wednesday. I'm following the README but this is what I get.
Iam working op my HP pavilion G60-DX .. I just installed VMware workstation and run Backtrack 3 ISO image as a linux virtual machine. loading the linux operating system up with "other linux 2.6.x kernell" as a setting, and starting the backtrack 3 virtual machine, everything is fine up to this point. when in the shell-konsole when typing at bt - # "airomn-ng" there is no: Interface Chipset Driver
I can access the internet and use browsers normaly from the backtrack it self , when its running .. how u can explain that to me .. VM cant se my wirless and tald me that there is no wireless interface while am already can open any website within ... what is the best solution to that! does the problem with my laptopb compatibility with backtrack !!! or with the VM itself
how do i configure wireless usb adapter to work with backtrack 4 on vmware
View 2 Replies View RelatedI'm running a 64bit Version of Windows 7. I'm also dual-booting 64bit Ubuntu 10.04 (if it matters). However, for this I'm trying to get this working on the Windows 7 side of things. I downloaded the BackTrack 5 32bit GNOME .iso file (BT5-GNOME-32.iso) to my USB stick fine and made a VM on VMware Player. I set the OS as "Other Linux 2.6.x kernel" (if it matters). However, when I go to play my VM I get the following screen. I know I'm supposed to type Startx to launch the GUI. However, nothing happens; it's completely unresponsive (and yes keyboard focus is routed to the VM). There is no response, the cursor doesn't even blink.
View 1 Replies View Relatedi have not mastered the finer art of installing drivers. I am trying to install a tp-link wireless adapter tl-wn321g which are green lighted but since i don't know how to install the driver.
View 6 Replies View Relatedi am newbie to backtrack.i have backtrac3 and it is not detecting my wireless usb. i have tplink TPLINK TL-WN722N I want to install its drive on back track.plz help me by answering with full tutorial plz i really need help.or you can send me tutorial to my email id.
View 10 Replies View RelatedI have just installed Ubuntu 9.10 on an Acer TravelMate 290E. I've got internet connection through the Ehternet Cable, but when I plug in the D-Link WLAN USB device, although the system recognises it, it is disconnected. How can I connect the WLAN USB device adn get it to work?
View 5 Replies View RelatedI got an older computer from a friend who had Windows XP as an operating system. I installed Ubuntu 10.04 on it, but cannot get the wireless controller to work. It is a BCM4303. Yes, it is an old one. So far I have spend virtually nothing on the computer. Ubuntu installed without a hitch as far as I can tell with the exception of this WIFI problem. I have searched the forums but got no matches. Perhaps I am using the wrong key words. Can anyone offer a solution or point me in the general direction.
View 4 Replies View RelatedI have noticed kernel.org with kernel releases on the mainline.Example: 2.6.36-rc1 is currently on the mainline. What does it mean? Does it mean that feature changes been freezed.Does it mean "2.6.36-rc1 Released". I have job to verify vmware drivers to test the version information, Can I test it now through compiling for vmware drivers now. Lots of Git activity goes on after kernel comes on mainline. Does it mean our vmware drivers can only be tested after kernel if finally announced
View 4 Replies View RelatedI wonder if there is anyone who could install the Wireless card drivers in Backtrack 3? and post where i can download it later?My Wireless card:Intel Wifi Link 5100 AGN( I found a post but i dont understand it and im new whit linux HERE )
View 3 Replies View RelatedI am trying to get the drivers and patches for my alfa AWUS036EW on BackTrack 5 with these instructions: [URL] Everything works until I type make I get this message:
[Code]....
I've just got a TP-Link wn-851n PCI WLAN card, and the problem is that ubuntu can search for the network, but I can't join into the network after typing the password. I'm sure that it is correct as m Windows notebook is also using that network.
Taking a look in dmesg, and it start to loop this message after I joined the network.
Quote:
I installed Red hat linux 5.4 on my VMware workstation and it worked finem but the filesize of linux was not as per my requirements. VMware only gave 3GB to my root (/) which is very small. How can I adjust the filesize of linux while installing it on VMware.
View 2 Replies View RelatedI installed fedora 15 ,i went for install tools and successfully mount virtual drive, but after that i cant extract ****.tar.gz file. No. of errors arises like "can't success bcoz previous error" Or read only file system. I tried to change file permission but cant get result.I searched no. articles on net and follow same procedure ,but not succeed .Becoz of this i cant see fullscreen window of fedora
View 10 Replies View RelatedI have a desktop that has a d-link DWL-520 wireless card, which was working under Windoze. Today I installed Centos 5.4 on the system , which went cleanly. I then used Network Configuration to set up the wireless card. I specified to use DHCP, set the SSID and authentication password. When I tried to activate the card I get these error messages
Error for wireless request "Set Mode" (8B06): SET failed on device wlan0 ; Operation not supported. Error for wireless request "Set Encode" (8B2A): SET failed on device wlan0 ; Invalid argument. Error for wireless request "Set Encode" (8B2A): SET failed on device wlan0 ; Invalid argument. Determining IP information for wlan0.
The hardware manager seems to have correctly identified the card and chipset, (Intersil Prism 2.5) and installed driver hostap_pci which came with the distro. This web site seems to suggest that this is the correct driver: [URL] searching forums I've found a few references to these errors, but they were from several years ago, and for different distros and cards. I did find a reference to using Network Manager to configure the card instead of Network Configuration. I started the NM service and configured a connection using it instead, but still no luck.
[Code]....
I am attempting to install a WLAN card driver but I'm having trouble with running "make". When I launch it it tells me I need to set the kernelpath, but my problem is that I have no idea where the kernel even is inside of fedora. I'm on Fedora 14.
View 2 Replies View Relatedinstall my atheros 9285 wireless card driver in backtrack 4 in vmware i am pretty new to linux and have been playing with various linux commands to see if i can get more familiar with linux. I have downloaded a linux driver for atheros card but dont seem to be able to install it could some one please advize on where to download the correct driver for my card and how to install it any help will be very much appreciated ps i have been following various guides and downloaded a driver but cant get it into the root directory of linux in vmware or inst airmon-ng comes back with no interface still
View 1 Replies View RelatedI am very new to this site. Is there a good tutorial on installing CentOS X86_64 on VMware Server Console?
View 2 Replies View RelatedI have a Broadcom B4312(I believe) wireless card and installed the drivers for it, but under the Wireless tab in Network Connections, it doesn't show "wlan0" or anything similar to "eth0"(which it shows under "Wired"). I ran iwconfig and this is what I got:
[Code]....
Installing backtrack4 tools with menu structure in Kubuntu 9.10 *NOTE* This WILL break your kpackagekit !!! You will need to reinstall kpackagekit after the installation is complete or fix it with synaptic. *This may or may not break your system so do at your own risk* For this to work you will need to follow these instructions EXACTLY as it is here. Go to: [URL] Download the tarzip and open it up. INSTALLING THE BACKTRACK SUB MENU STRUCTURE
Place the menu_backup folder in your home directory. <<----YOU WILL NEED THIS FOR THIS TO WORK Open the BT4-app-list folder and place the backtrack.txt1 file also in your home directory. Open a shell and type: kdesudo dolphin /etc/xdg/menus Delete the kd4-applications.menu file. (dont worry, I have provided a backup copy in the download) Open the BT4-kde4-applicantions.menu folder and place it where you deleted the old menu. Now you can exit.
Now you have the bt4 sub menu. ADDING THE BT4 GPG KEY AND REPO Open a shell and type: wget -q [URL] This adds the GPG key. Then in a shell type: sudo echo "deb [URL] pwnsauce main microverse macroverse restricted universe multiverse" > /etc/apt/sources.list
[Code]....
my OS is linux ubuntu x64 v10.10 on netbook dell vostro 1520. i'm looking for wlan [COLOR=#00C800 ! important][COLOR=#00C800 ! important]drivers[/COLOR][/COLOR] for network adapter broadcom like this:
Quote: Network controller: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller (rev 01)
Have you had to download drivers for GNU/Linux and install them when some device didn't work? Except nVidia/ATi drivers I mean. Just like in Windows. Or the only driver you can download for GNU/Linux is a driver for videocard and all other are in always in the system?
View 4 Replies View RelatedI have a Xerox printer, Phaser 3160. On the cd that comes with the printer i got a file for linux called "P3160.tar.gz".
Having extracted this file I found the content as listed below:
These are the files in the linux dir,nothing in the other dirs
Below are dirs
As there is no ./configure file, what do i have to do to install the drivers for the printer
I am using Suse 11.3
I don't know how to install TP-LINK TL-WN7200ND drivers for Ubuntu 11.04. I have a clean install of Ubuntu 11.4. I download drivers from here [URL]2 but I don't know how to install them.It must be like for dummies because I don't have enough knowledge about Ubuntu.
View 5 Replies View RelatedI just installed Ubuntu 10.04 64bit Desktop on my Vostro 1400 and I'm wondering what I have to do to be able to have 3D acceleration under VMWare (ie. be able to enable Aero under a Windows 7 guest).
VMWare has a popup saying "This computer does not have a 3D graphics system supported by VMware Player." How do I check what driver Ubuntu uses for the X3100? What driver would enable 3D?
I'm fairly new to Linux. I am trying to build and install the drivers for the ASUS USB-N10 wlan usb dongle, using the newest drivers from the Realtek website. I've never used make before on Linux and am running into what are probably some pretty basic problems, but I'm not sure where to look for the answers. I used aptitude to install the "make" and "build-essential" packages. I unpacked the drivers using Archive Manager. I changed to the driver directory and ran "make". It stopped with "No such file or directory." I became superuser and ran make, in case it had permission problems when creating the directory.
Here are the results.
obie@four:~/realtek/rtl8712_8188_8191_8192SU_usb_linux_v2.6.6.0.20110401/driver/rtl8712_8188_8191_8192SU_usb_linux_v2.6.6.0.20110401$ make
make ARCH=i386 CROSS_COMPILE= -C /lib/modules/2.6.32-5-686/build M=/home/obie/realtek/rtl8712_8188_8191_8192SU_usb_linux_v2.6.6.0.20110401/driver/rtl8712_8188_8191_8192SU_usb_linux_v2.6.6.0.20110401 modules
make: *** /lib/modules/2.6.32-5-686/build: No such file or directory. Stop.
make: *** [modules] Error 2 .....
I haven't modified the makefile in any way -- it is the same as what I downloaded. I've read posts from other users who have compiled and installed the drivers on Ubuntu with no problem.
The contents of the directory I'm in when I run make are as follows:
drwxrwxrwx 21 obie obie 4096 Apr 1 03:25 .
drwx------ 3 obie obie 4096 Sep 3 22:43 ..
-rwx------ 1 obie obie 3479 Apr 1 03:25 autoconf_rtl8712_usb_linux.h
-rwx------ 1 obie obie 151 Apr 1 03:25 clean
drwxrwxrwx 2 obie obie 4096 Apr 1 03:25 cmd
-rwx------ 1 obie obie 516 Apr 1 03:25 config
drwxrwxrwx 2 obie obie 4096 Apr 1 03:25 crypto
drwxrwxrwx 2 obie obie 4096 Apr 1 03:25 debug .....